ZH
RU
ES

test

test, Total:500 items.

In the international standard classification, test involves: Geology. Meteorology. Hydrology, Environmental testing, Earthworks. Excavations. Foundation construction. Underground works, Internal combustion engines for road vehicles, Non-destructive testing, Astronomy. Geodesy. Geography, Radiocommunications, Mining and quarrying, Nuclear energy engineering, Vibrations, shock and vibration measurements, Energy and heat transfer engineering in general, Protection of and in buildings, Rubber, Telecommunications in general, Electrical accessories, Aircraft and space vehicles in general, Physics. Chemistry, Wind turbine systems and other alternative sources of energy, Solar energy engineering, Applications of information technology, Air quality, Electromechanical components for electronic and telecommunications equipment, Information technology (IT) in general, Electrical wires and cables, Fibre optic communications, Quality, Construction materials, Graphical symbols, Medical equipment, Linear and angular measurements, Mechanical testing, Crude petroleum, Rubber and plastics products, Leather technology, Shipbuilding and marine structures in general, Internal combustion engines, Welding, brazing and soldering, Electrical engineering in general, Biology. Botany. Zoology, Pesticides and other agrochemicals, Metrology and measurement in general, Electricity. Magnetism. Electrical and magnetic measurements, Insulation, Power transmission and distribution networks, Company organization and management, Protective equipment, Water quality, Audio, video and audiovisual engineering, Acoustics and acoustic measurements, Special purpose vehicles, Radiation measurements, Protection against crime, Farming and forestry, Electrical equipment for working in special conditions, Analytical chemistry, Measurement of volume, mass, density, viscosity, Measurement of fluid flow, Protection against fire, Optoelectronics. Laser equipment, Ground service and maintenance equipment, Vocabularies, Non-textile floor coverings, Paints and varnishes, Microbiology, Food products in general, Wood, sawlogs and sawn timber, Photography.

ABS - American Bureau of Shipping, test

ABS 89-1998 Hull Thickness Measurement (Gauging Surveys)

RO-ASRO, test

STAS 3330-1987 Terrcstrial measurements SIGNALS FOR GEODESIC POINTS
STAS 4294-1973 Earth measurements LEVELLING AND GEODESIC TRIANGULATION MARKS
STAS SR 227-5-1996 Cement. Phys?cal tests. Determination of hydratation heat
STAS 6926/13-1989 Motor vehicles DETERMINAT ION OF SUSPEN- SION RATE Testing methods
STAS 6926/19-1989 Motor vehicles ENDURANCE RUN TESTS Tcsting methods
STAS 6669/3-1986 HIGH-VOLTAGE TESTS Measuring devices General specifications
STAS 12509-1986 NONDESTRUCTIVE, TESTING METHODS Classification and terminology
SR EN 325-1996 Wood - based panels. Determination of dimensions of boards
STAS 10381/4-1976 Transformers OPERATION, CHARACTERISTICS, TESTING Terminology TESTING

Society of Automotive Engineers (SAE), test

SAE TS338-1-1987 TS338 Test for Electrical Connectors Visual Examination
SAE J1589-1998 Internal Combustion Engines Piston Rings Inspection Measuring Principles
SAE J1161-2004 Operational Sound Level Measurement Procedure for Snow Vehicles
SAE TS331-2-1987 TS331 Test for Electrical Connectors Climatic Tests
SAE ARP1972-2003 Recommended Measurement Practices and Procedures for EMC Testing

German Institute for Standardization, test

DIN 54161:2021-03 Non-destructive testing - Qualification of non-destructive testing test assistants
DIN EN ISO 19156:2022-02 Geographic information - Observations, measurements and samples (ISO/DIS 19156:2022); English version prEN ISO 19156:2022 / Note: Date of issue 2022-01-14*Intended as replacement for DIN EN ISO 19156 (2013-10).
DIN EN ISO 22476-10:2018-03 Geotechnical investigation and testing - Field testing - Part 10: Weight sounding test (ISO 22476-10:2017); German version EN ISO 22476-10:2017
DIN EN ISO 19156:2013-10 Geographic information - Observations and measurements (ISO 19156:2011); English version EN ISO 19156:2013 / Note: To be replaced by DIN EN ISO 19156 (2022-02).
DIN EN 61724:1999 Photovoltaic system performance monitoring - Guidelines for measurement, data exchange and analysis (IEC 61724:1998); German version EN 61724:1998
DIN 1319-3:1996 Fundamentals of metrology - Part 3: Evaluation of measurements of a single measurand, measurement uncertainty
DIN 53435:2018-09 Testing of plastics - Bending test and impact test on dynstat test specimens
DIN EN 60512-14-6:2006-11 Connectors for electronic equipment - Tests and measurements - Part 14-6: Sealing tests - Test 14f: Interfacial sealing (IEC 60512-14-6:2006); German version EN 60512-14-6:2006 / Note: DIN IEC 60512-7 (1994-05) remains valid alongside this standard unt...
DIN EN 60512-14-4:2006-11 Connectors for electronic equipment - Tests and measurements - Part 14-4: Sealing tests - Test 14d: Immersion - Waterproof (IEC 60512-14-4:2006); German version EN 60512-14-4:2006 / Note: DIN IEC 60512-7 (1994-05) remains valid alongside this standard ...
DIN EN 61040:1993 Power and energy measuring detectors, instruments and equipment for laser radiation (IEC 61040:1990); German version EN 61040:1992
DIN EN 60512-5-1 Berichtigung 1:2015-06 Connectors for electronic equipment - Tests and measurements - Part 5-1: Current-carrying capacity tests -Test 5a: Temperature rise (IEC 60512-5-1:2002); German version EN 60512-5-1:2002, Corrigendum to DIN EN 60512-5-1:2003-01
DIN EN 60512-4-1:2004-01 Connectors for electronic equipment - Tests and measurements - Part 4-1: Voltage stress tests - Test 4a: Voltage proof (IEC 60512-4-1:2003); German version EN 60512-4-1:2003 / Note: DIN IEC 60512-2 (1994-05) remains valid alongside this standard until ...
DIN 33881-2:2006 Measurement by means of detector tubes - Part 2: Terminology
DIN EN 60512-14-5:2006-11 Connectors for electronic equipment - Tests and measurements - Part 14-5: Sealing tests - Test 14e: Immersion at low air pressure (IEC 60512-14-5:2006); German version EN 60512-14-5:2006 / Note: DIN IEC 60512-7 (1994-05) remains valid alongside this st...
DIN 19263:2007-05 pH-measurement - pH measuring chains
DIN EN 60512-11-14:2004-06 Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests - Test 11p: Flowing single gas corrosion test (IEC 60512-11-14:2003); German version EN 60512-11-14:2003 / Note: DIN EN 60512-11-14 (1997-06) remains valid alongs...
DIN EN 60512-11-7:2004-06 Connectors for electronic equipment - Tests and measurements - Part 11-7: Climatic tests - Test 11g: Flowing mixed gas corrosion test (IEC 60512-11-7:2003); German version EN 60512-11-7:2003 / Note: DIN EN 60512-11-7 (1996-08) remains valid alongside t...
DIN EN 60512-12-3:2006-11 Connectors for electronic equipment - Tests and measurements - Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting (IEC 60512-12-3:2006); German version EN 60512-12-3:2006
DIN EN 60512-12-3 Berichtigung 1:2008-11 Connectors for electronic equipment - Tests and measurements - Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting (IEC 60512-12-3:2006); German version EN 60512-12-3:2006, Corrigendum to DIN EN 60512-12-3:2006-11; German version CENELEC-C...
DIN EN 60512-14-2:2006-11 Connectors for electronic equipment - Tests and measurements - Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage (IEC 60512-14-2:2006); German version EN 60512-14-2:2006 / Note: DIN IEC 60512-7 (1994-05) remains valid alongside this stand...
DIN 19242-6:1987-01 Measurement and control; performance tests on process computer systems; time measurement; function tested: detection of a bit pattern
DIN EN 60068-2-17:1995-05 Environmental testing - Part 2: Tests - Test Q: Sealing (IEC 60068-2-17:1994); German version EN 60068-2-17:1994
DIN EN ISO 7906:2023-02 Leather - Tests for colour fastness - General principles of testing (ISO 7906:2022); German version EN ISO 7906:2022
DIN EN 60512-12-5 Berichtigung 1:2008-11 Connectors for electronic equipment - Tests and measurements - Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, soldering iron method (IEC 60512-12-5:2006); German version EN 60512-12-5:2006, Corrigendum to DIN EN 60512-12-5:2006-11...
DIN EN 60512-12-4 Berichtigung 1:2008-11 Connectors for electronic equipment - Tests and measurements - Part 12-4: Soldering tests - Test 12d: Resistance to soldering heat, solder bath method (IEC 60512-12-4:2006); German version EN 60512-12-4:2006, Corrigendum to DIN EN 60512-12-4:2006-11; G...
DIN EN 60512-12-4:2006-11 Connectors for electronic equipment - Tests and measurements - Part 12-4: Soldering tests - Test 12d: Resistance to soldering heat, solder bath method (IEC 60512-12-4:2006); German version EN 60512-12-4:2006
DIN EN 60512-12-5:2006-11 Connectors for electronic equipment - Tests and measurements - Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, soldering iron method (IEC 60512-12-5:2006); German version EN 60512-12-5:2006
DIN EN IEC 60512-11-1:2021-03 Connectors for electrical and electronic equipment - Tests and measurements - Part 11-1: Climatic tests - Test 11a - Climatic sequence (IEC 60512-11-1:2019); German version EN IEC 60512-11-1:2019 / Note: DIN EN 60512-11-1 (1999-08) remains valid alongs...
DIN EN 60512-11-10:2003-01 Connectors for electronic equipment - Tests and measurements - Part 11-10: Climatic tests; Test 11j: Cold (IEC 60512-11-10:2002); German version EN 60512-11-10:2002 / Note: DIN IEC 60512-6 (1994-05) remains valid alongside this standard until 2005-04-01.
DIN EN 60512-11-9:2003-01 Connectors for electronic equipment - Tests and measurements - Part 11-9: Climatic tests; Test 11i: Dry heat (IEC 60512-11-9:2002); German version EN 60512-11-9:2002 / Note: DIN IEC 60512-6 (1994-05) remains valid alongside this standard until 2005-04-01.
DIN EN ISO 15682:2002-01 Water quality - Determination of chloride by flow analysis (CFA and FIA) and photometric or potentiometric detection (ISO 15682:2000); German version EN ISO 15682:2001
DIN 19242-1:1987-01 Measurement and control; performance tests on process computer systems; time measurement; test procedures

Professional Standard - Geology, test

DZ/T 0227-2002 Landslide and collapse monitoring and measurement specification

British Standards Institution (BSI), test

BS EN 60068-2-13:1999 Environmental testing. Test methods. Tests. Test M. Low air pressure
BS EN IEC 60068-2-13:2021 Environmental testing - Tests. Test M: Low air pressure
BS EN IEC 60068-2-17:2023 Environmental testing - Tests. Test Q: Sealing
BS EN ISO 22476-10:2017 Geotechnical Investigation and testing. Field testing - Weight sounding test
BS EN 60068-2-11:1999 Environmental testing. Test methods. Tests. Test KA. Salt mist
BS EN 60068-2-14:2009 Environmental testing — Part 2-14: Tests — Test N: Change of temperature
BS EN 60068-2-74:2000+A1:2018 Environmental testing - Tests. Test Xc: Fluid contamination
BS EN IEC 60068-2-14:2023 Environmental testing - Tests. Test N: Change of temperature
BS EN 60068-2-45:1993 Environmental testing. Test methods. Environmental testing. Tests. Test XA and guidance. Immersion in cleaning solvents
BS EN IEC 60068-2-11:2021 Tracked Changes. Environmental testing. Tests. Test Ka: Salt mist
BS EN 60068-2-10:2005+A1:2018 Environmental testing - Tests. Test J and guidance: Mould growth
BS EN 60068-2-18:2017 Tracked Changes. Environmental testing. Tests. Test R and guidance: Water
BS EN 60068-2-64:2008+A1:2019 Environmental testing - Tests. Test Fh: Vibration, broadband random and guidance
BS EN IEC 60068-2-85:2019 Environmental testing - Tests. Test Fj. Vibration. Long time history replication
BS EN 60068-2-41:2000 Environmental testing. Test methods. Tests. Test Z/BM: Combined dry heat/low air pressure tests
BS EN 60068-2-17:1995 Environmental testing. Test methods. Test Q. Sealing
BS EN 61724:1998 Photovoltaic system performance monitoring - Guidelines for measurement, data exchange and analysis
BS ISO/IEC 30107-3:2017 Information technology. Biometric presentation attack detection. Testing and reporting
BS EN 60068-2-61:1994 Environmental testing. Test methods. Test Z/ABDM. Climatic sequence
BS EN 60068-2-68:1996 Environmental testing. Test methods. Test L. Dust and sand
BS EN 60512-25-1:2001 Connectors for electronic equipment. Test and measurements. Test 25a. Crosstalk ratio
BS EN IEC 60068-2-52:2018 Tracked Changes. Environmental testing. Tests. Test Kb: Salt mist, cyclic (sodium chloride solution)
BS EN IEC 60512-11-1:2019 Connectors for electrical and electronic equipment. Tests and measurements - Climatic tests. Test 11a. Climatic sequence
BS EN 60068-2-67:1996+A1:2019 Environmental testing - Tests. Test Cy. Damp heat, steady state, accelerated test primarily intended for components
BS EN IEC 60068-2-38:2021 Tracked Changes. Environmental testing. Tests. Test Z/AD: Composite temperature/humidity cyclic test
BS EN 61300-2-29:1997 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Tests. Low air pressure
BS EN 60512-17-1:2010 Connectors for electronic equipment. Tests and measurements. Cable clamping tests. Test 17a. Cable clamp robustness
BS EN 60068-2-40:2000 Environmental testing. Test methods. Test Z/AM. Combined cold/low air pressure tests
BS EN IEC 60512-9-5:2020 Connectors for electrical and electronic equipment. Tests and measurements - Endurance tests. Test 9e: Current loading, cyclic
BS EN 60512-11-13:2002 Connectors for electronic equipment. Tests and measurements. Climatic tests. Test 11n. Gas tightness, solderless wrapped connections
BS EN 60068-2-7:1993 Environmental testing. Test methods. Test Ga and guidance. Acceleration, steady state
BS EN 60512-17-4:2010 Connectors for electronic equipment. Tests and measurements. Cable clamping tests. Test 17d. Cable clamp resistance to cable torsion
BS EN 60512-25-3:2001 Connectors for electronic equipment. Test and measurements. Test 25c. Rise time degradation
BS EN ISO 18674-3:2017+A1:2020 Geotechnical investigation and testing. Geotechnical monitoring by field instrumentation - Measurement of displacements across a line: Inclinometers
BS ISO/IEC 30107-3:2023 Tracked Changes. Information technology. Biometric presentation attack detection. Testing and reporting
BS EN ISO 7027-1:2016 Water quality. Determination of turbidity. Quantitative methods
PD IEC TS 60695-11-40:2021 Fire hazard testing. Test flames. Confirmatory tests. Guidance
BS EN ISO 15682:2001 Water quality. Determination of chloride by flow analysis (CFA and FIA) and photometric or potentiometric detection
BS EN ISO 16264:2004 Water quality. Determination of soluble silicates by flow analysis (FIA and CFA) and photometric detection
BS EN 60512-17-3:2010 Connectors for electronic equipment. Tests and measurements. Cable clamping tests. Test 17c. Cable clamp resistance to cable pull (tensile)
PD ISO/TR 20461:2001 Determination of uncertainty for volume measurements made using the gravimetric method
BS EN 60512-23-4:2001 Connectors for electronic equipment. Tests and measurements. Screening and filtering tests. Test 23d. Transmission line reflections in the time domain
BS ISO 29473:2010 Fire tests. Uncertainty of measurements in fire tests
BS EN 60068-2-69:2017+A1:2019 Environmental testing - Tests. Test Te/Tc. Solderability testing of electronic components and printed boards by the wetting balance (force measurement) method
BS EN 60068-2-39:2016 Tracked Changes. Environmental testing. Tests. Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
BS EN 60068-2-66:1995 Environmental testing. Test methods. Test Cx. Damp heat, steady state (unsaturated pressurized vapour)
BS ISO 8178-6:2018 Reciprocating internal combustion engines. Exhaust emission measurement - Report of measuring results and test
BS 3900-D9:1986 Methods of test for paints. Optical tests on paint films. Determination of colour and colour difference: measurement
BS EN ISO 22477-4:2018 Geotechnical investigation and testing. Testing of geotechnical structures - Testing of piles: dynamic load testing
BS ISO/IEC 27004:2016 Tracked Changes. Information technology. Security techniques. Information security management. Monitoring, measurement, analysis and evaluation
BS EN 60512-9-1:2010 Connectors for electronic equipment - Tests and measurements - Endurance tests - Test 9a - Mechanical operation

FI-SFS, test

国家铁路局, test

TB/T 3148-2017 Track inspection and measuring instrument gauge

工业和信息化部, test

YD/T 3811-2020 Test method for radio monitoring direction finding system in 3GHz~12.75GHz frequency band
YD/T 3613-2019 HF fixed radio monitoring direction finding system opening test parameters and test methods
YD/T 3282-2017 HF mobile radio monitoring direction finding system opening test parameters and test methods
YD/T 3810-2020 Technical requirements for radio monitoring and direction finding systems in the 3GHz to 12.75GHz frequency band

YU-JUS, test

JUS G.E2.311-1983 Steel cord conveyor belts. Measurement of elongation
JUS B.H8.605-1983 Testing of bitumen. Determination of parafin number
JUS B.H8.031-1983 Testing of liquid fuels — Determination of freezing point
JUS B.B8.104-1982 Testing of mineral filler. The determination of hardenings index

SAE - SAE International, test

SAE J1589-1990 INTERNAL COMBUSTION ENGINES - PISTON RINGS - INSPECTION MEASURING PRINCIPLES
SAE J1589-2008 Internal Combustion Engines - Piston Rings - Inspection Measuring Principles
SAE J1161-2017 Operational Sound Level Measurement Procedure for Snow Vehicles
SAE J1161-2021 Operational Sound Level Measurement Procedure for Snow Vehicles
SAE J1161-1976 Operational Sound Level Measurement Procedure for Snow Vehicles@ Recommended Practice (November 1976)
SAE R-452-2017 Chassis Dynamometer Testing

Japanese Industrial Standards Committee (JISC), test

JIS Z 2330:2012 Non-destructive testing -- Selection of leak testing method
JIS K 0804:2022 Gas detector tube measurement system

Jilin Provincial Standard of the People's Republic of China, test

DB22/T 2574-2016 Technical Regulations for Geological Radar Detection and Mapping

AT-ON, test

ONORM M 1384-1989 Coordinate metrology; process of probing, uncertainty of probing, type of probe
ONORM L 5262-1985 Milking machines; testing; testing devices, testing aids and fest method
ONORM M 1346-1-1995 Control of measuring and test equipment - Testing Instruction for plug gauges
ONORM B 5211-1981 Organic floor coverings; testing of electrical resistance; measuring methods, test report
ONORM M 3034-1998 Non-destructive testing - Determination of mechanic characteristic values of magnetizable steels by non-destructive testing by means of magnetically induced procedures
ONORM M 1349-1997 Verification of measuring and test equipment - Testing Instruction for measuring tapes
ONORM M 7506-1979 Testing of Space heaters; Instructions for testing
ONORM A 5482 Teil.3-1983 Packaging testing; examples for the compilation of test schedules
ONORM M 1349/AC1-1999 Verification of measuring and test equipment - Testing Instruction for measuring tapes (Corrigendum)
ONORM B 5212-2001 Organic floor coverings - Testing of electrical resistance of adhesives - Measuring methods, test report

US-FCR, test

FCR COE ETL 1110-2-263-1981 SURVEYING AND MAPPING PRECISE SURVEY MEASUREMENT OF DAMS

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, test

GB/T 34089-2017 Test parameters and test methods for VHF/UHF frequency band radio monitoring and direction finding system in OATS
GB/T 33511-2017 Mechanical vibration—Evaluation of measurement results from dynamic tests and investigation on bridges
GB/T 35388-2017 Non-destructive testing—X-ray digital radiography—Practice

Professional Standard - Post and Telecommunication, test

YD/T 2675-2013 VHF/UHF Radio Monitoring and Direction Finding System Opening Test Parameters and Test Methods

Professional Standard - Petroleum, test

SY/T 6938-2013 The technical specifications for operation of casing-check logging
SY 6938-2013 Technical specifications for oil and casing testing and logging operations
SY/T 5623-1997 Prediction and detection methods of formation pore pressure
SY 7070-2016 Microseismic in-well detection and monitoring technical regulations

American Society for Testing and Materials (ASTM), test

ASTM C1592/C1592M-21 Standard Guide for Making Quality Nondestructive Assay Measurements
ASTM E2554-18 Standard Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method Using Control Chart Techniques
ASTM E2554-18e1 Standard Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method Using Control Chart Techniques
ASTM E1954-05 Standard Practice for Conduct of Research in Psychophysiological Detection of Deception (Polygraph)
ASTM E2031-99(2016) Standard Practice for Quality Control of Psychophysiological Detection of Deception (Polygraph) Examinations

CEN - European Committee for Standardization, test

EN ISO 22476-10:2017 Geotechnical investigation and testing - Field testing - Part 10: Weight sounding test

International Organization for Standardization (ISO), test

ISO 22476-10:2017 Geotechnical investigation and testing — Field testing — Part 10: Weight sounding test
ISO 17621:2015 Workplace atmospheres - Short term detector tube measurement systems - Requirements and test methods
ISO/IEC 27004:2016 Information technology - Security techniques - Information security management - Monitoring, measurement, analysis and evaluation
ISO 15259 Air quality — Measurement of stationary source emissions — Requirements for measurement sections and sites and for the measurement objective, plan and report
ISO 3454:1983 Liquid flow measurement in open channels; Direct depth sounding and suspension equipment

HU-MSZT, test

ANSI - American National Standards Institute, test

IT9.24-1997 Imaging Materials - Arrhenius-Type Predictions - Test Method (IS&T)
N15.36-1983 NUCLEAR MATERIALS - NONDESTRUCTIVE ASSAY MEASUREMENT CONTROL AND ASSURANCE (INMM)
N15.36-1994 Nuclear Materials - Nondestructive Assay Measurement Control and Assurance (INMM)

European Committee for Standardization (CEN), test

EN ISO 19156:2023 Geographic information - Observations, measurements and samples (ISO 19156:2023)

GB-REG, test

REG NASA-LLIS-0021-1991 Lessons Learned - Use of Particle Impact Noise Detection Test to Detect Contamination

Association Francaise de Normalisation, test

FD X30-147-2015 Measurement plan for energy performance monitoring - Design and implementation
NF C57-300:1999 Photovoltaic system performance monitoring - Guidelines for measurement, data exchange and analysis.
NF C20-403:1990 Environmental Testings Test Methods Guidance for Damp Heat Tests
NF EN 1593/A1:2004 Essais non destructifs - Contrôle d'étanchéité - Contrôle à la bulle
NF EN 1593:1999 Essais non destructifs - Contrôle d'étanchéité - Contrôle à la bulle
NF EN ISO 22476-10:2017 Reconnaissance et essais géotechniques - Essais en place - Partie 10 : essai de sondage par poids
NF EN 60068-2-75:2015 Essais d'environnement - Partie 2-75 : essais - Essai Eh : essais au marteau
NF EN 60512-11-3:2002 Connecteurs pour équipements électroniques - Essais et mesures - Partie 11-3 : essais climatiques - Essais 11c : essai continu de chaleur humide
NF EN 60068-2-17:1995 Essais d'environnement - Partie 2 : essais - Essai Q : étanchéité.
NF EN 60671:2011 Centrales nucléaires de puissance - Systèmes d'instrumentation et de contrôle commande importants pour la sûreté - Essais de surveillance
NF EN 60068-2-2:2007 Essais d'environnement - Partie 2-2 : essais - Essais B : chaleur sèche
NF EN 60068-2-1:2007 Essais d'environnement - Partie 2-1 : essais - Essais A : froid
NF EN 60512-22-1:2011 Connecteurs pour équipements électroniques - Essais et mesures - Partie 22-1 : essais de capacité - Essai 22a : capacité
NF EN 60512-11-9:2002 Connecteurs pour équipements électroniques - Essais et mesures - Partie 11-9 : essais climatiques - Essai 11i : chaleur sèche
NF EN 60512-11-10:2002 Connecteurs pour équipements électroniques - Essais et mesures - Partie 11-10 : essais climatiques - Essai 11j : froid
NF EN 60512-11-5:2002 Connecteurs pour équipements électroniques - Essais et mesures - Partie 11-5 : essais climatiques - Essais 11e : moisissures
NF EN 60068-2-74:2000 Essais d'environnement - Partie 2 : essais - Essai Xc : contamination par des fluides
NF C48-225:1986 Intrusion detection - Detectors - General requirements.
NF EN 60512-11-11:2002 Connecteurs pour équipements électroniques - Essais et mesures - Partie 11-11 : essais climatiques - Essai 11k : basse pression atmosphérique
NF EN 60512-11-14:2006 Connecteurs pour équipements électroniques - Essais et mesures - Partie 11-14 : essais climatiques - Essai 11p : essai de corrosion dans le flux d'un gaz
NF EN 60512-24-1:2013 Connecteurs pour équipements électroniques - Essais et mesures - Partie 24-1 : essais de perturbations magnétiques - Essai 24a : magnétisme résiduel
NF EN IEC 60068-2-13:2021 Essais d'environnement - Partie 2-13 : essais - Essai M : basse pression atmosphérique
NF EN ISO 16264:2004 Qualité de l'eau - Dosage des silicates solubles par analyse en flux (FIA et CFA) et détection photométrique
NF EN 60068-2-68:1998 Essais d'environnement - Partie 2 : essais - Essai L : poussière et sable.
NF EN 60512-3-1:2002 Connecteurs pour équipements électroniques - Essais et mesures - Partie 3-1 : essais d'isolement - Essai 3a : résistance d'isolement
NF EN 60512-14-4:2006 Connecteurs pour équipements électroniques - Essais et mesures - Partie 14-4 : essais d'étanchéité - Essai 14d : immersion sous pression d'eau
NF EN 60512-14-6:2006 Connecteurs pour équipements électroniques - Essais et mesures - Partie 14-6 : essais d'étanchéité - Essai 14f : étanchéité interfaciale
NF EN 60512-11-6:2002 Connecteurs pour équipements électroniques - Essais et mesures - Partie 11-6 : essais climatiques - Essai 11f : corrosion, brouillard salin
NF EN 60512-6-3:2002 Connecteurs pour équipements électroniques - Essais et mesures - Partie 6-3 : essais de contraintes dynamiques - Essai 6c : chocs
NF EN 60512-6-2:2002 Connecteurs pour équipements électroniques - Essais et mesures - Partie 6-2 : essais de contraintes dynamiques - Essai 6b : secousses
NF EN 60512-5-1:2002 Connecteurs pour équipements électroniques - Essais et mesures - Partie 5-1 : essais de courant limite : Essai 5a : échauffement
GA X43-139:2014 Stationary source emissions - Guide for performance tests and periodic monitoring tests to be carried out on semi-continuous PCDDs and PCDFs measurement systems and for the management of cartridges
NF C20-700-2-18*NF EN 60068-2-18:2017 Environmental testing - Part 2-18 : tests - Test R and guidance : Water
NF EN 60068-2-18:2017 Essais d'environnement - Partie 2-18 : essais - Essai R et guide : eau
NF EN 60068-2-14:2009 Essais d'environnement - Partie 2-14 : essais - Essai N : variation de température
NF EN 60068-2-74/A1:2018 Essais d'environnement - Partie 2-74 : essais - Essai Xc : Contamination par des fluides
NF EN 60512-14-5:2006 Connecteurs pour équipements électroniques - Essais et mesures - Partie 14-5 : essais d'étanchéité - Essai 14e : immersion à basse pression atmosphérique
NF EN 60512-14-2:2006 Connecteurs pour équipements électroniques - Essais et mesures - Partie 14-2 : essais d'étanchéité - Essai 14b : étanchéité - Micro-fuite d'air
NF EN 60512-9-1:2010 Connecteurs pour équipements électroniques - Essais et mesures - Partie 9-1 : essais d'endurance - Essai 9a : fonctionnement mécanique
NF EN 60512-12-3:2006 Connecteurs pour équipements électroniques - Essais et mesures - Partie 12-3 : tests de soudure - Essai 12c : soudabilité, démouillage
NF EN 60512-11-4:2002 Connecteurs pour équipements électroniques - Essais et mesures - Partie 11-4 : essais climatiques - Essais 11d : variations rapides de température
NF C20-727*NF EN 60068-2-27:2009 Environmental testing - Part 2-27 : tests - Test Ea and guidance : shock.
NF C20-714*NF EN 60068-2-14:2009 Environmental testing - Part 2-14 : tests - Test N : change of temperature.
NF EN 60068-2-10:2005 Essais d'environnement - Partie 2-10 : essais - Essai J et Guide : moisissures
NF EN 60068-2-10/A1:2018 Essais d'environnement - Partie 2-10 : essais - Essai J et guide : Moisissures
NF EN 60512-16-1:2008 Connecteurs pour équipements électroniques - Essais et mesures - Partie 16-1 : essais mécaniques des contacts et des sorties - Essai 16a : endommagement par sonde d'essai
NF EN 60512-4-2:2002 Connecteurs pour équipements électroniques - Essais et mesures - Partie 4-2 : essais de contrainte diélectrique - Essai 4b : décharges partielles
NF EN 60512-4-1:2003 Connecteurs pour équipements électroniques - Essais et mesures - Partie 4-1 : essais de contrainte diélectrique - Essai 4a : tension de tenue
NF EN 60512-6-4:2002 Connecteurs pour équipements électroniques - Essais et mesures - Partie 6-4 : essais de contraintes dynamiques - Essai 6d : vibrations (sinusoïdales)
NF EN ISO 7906:2022 Cuir - Essais de solidité des coloris - Principes généraux s'appliquant aux essais
NF EN IEC 60512-9-5:2020 Connecteurs pour équipements électriques et électroniques - Essais et mesures - Partie 9-5 : essais d'endurance - Essai 9e : charge en courant, essai cyclique
NF EN 60512-12-4:2006 Connecteurs pour équipements électroniques - Essais et mesures - Partie 12-4 : essais de soudure - Essai 12d : résistance à la chaleur de soudage, méthode du bain de brasage
NF EN 60512-12-5:2006 Connecteurs pour équipements électroniques - Essais et mesures - Partie 12-5 : essais de soudure - Essai 12e : résistance à la chaleur de soudage, méthode du fer à souder
NF EN IEC 60512-11-1:2019 Connecteurs pour équipements électriques et électroniques - Essais et mesures - Partie 11-1 : essais climatiques - Essai 11a - Séquence climatique

IPC - Association Connecting Electronics Industries, test

IPC TM-650 2.3.38A-1988 Surface Organic Contaminant Detection Test (in-House Method)

American National Standards Institute （ANSI), test

ANSI N15.36-1994 Nuclear materials - Nondestructive assay measurement control and assurance
BS ISO 15259:2023 Air quality. Measurement of stationary source emissions. Requirements for measurement sections and sites and for the measurement objective, plan and report (British Standard)
ANSI N15.36-2010 American National Standard for Methods of Nuclear Material Control - Measurement Control Program - Nondestructive Assay Measurement Control and Assurance

Professional Standard - Earthquake, test

DB/T 67-2017 Classification and codes of seismic satellite electromagnetic observation items

Group Standards of the People's Republic of China, test

T/CDSA 305.19-2017 Recommended practice of inspection point plan for underwater structure
T/ZJNJ 0018-2023 Soil nutrient test procedure
T/RAC 024-2021 Technical requirements and test methods for maintenance and scrapping of VHF/UHF band radio monitoring and direction finding system

Indonesia Standards, test

SNI ISO 16831:2014

US-ACEI, test

IPC TM-650 2.3.38-1997 Surface Organic Contaminant Detection Test Revision B(Test Methods Manual)

Danish Standards Foundation, test

DS/EN 60068-2-75:1998 Environmental testing - Part 2: Tests - Test Eh: Hammer tests
DS/EN 61724:1999 Photovoltaic system performance monitoring - Guidelines for measurement, data exchange and analysis
DS/CEN ISO/TS 22476-10:2005 Geotechnical investigation and testing - Field testing - Part 10: Weight sounding test
DS/EN 60068-2-11:2001 Environmental testing - Part 2: Tests - Test Ka: Salt mist
DS/EN 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
DS/EN 60068-2-13:2001 Environmental testing - Part 2: Tests - Test M: Low air pressure
DS/EN 60068-2-2:2008 Environmental testing - Part 2-2: Tests - Test B: Dry heat
DS/EN IEC 60068-2-11:2021 Environmental testing – Part 2-11: Tests – Test Ka: Salt mist
DS/EN 60512-22-1:2010 Connectors for electronic equipment - Tests and measurements - Part 22-1: Capacitance tests - Test 22a: Capacitance
DS/EN 60068-2-44:1996 Environmental testing - Part 2: Tests - Guidance on Test T: Soldering
DS/EN 60068-2-74:2001 Environmental testing - Part 2: Tests - Test Xc: Fluid contamination
DS/EN 60512-11-11:2002 Connectors for electronic equipment - Tests and measurements - Part 11-11: Climatic tests - Test 11k: Low air pressure
DS/EN 60068-2-40:2001 Environmental testing - Part 2: Tests - Test Z/AM: Combined cold/low air pressure tests
DS/EN IEC 60068-2-13:2021 Environmental testing – Part 2-13: Tests – Test M: Low air pressure
DS/EN 60068-2-68:1998 Environmental testing - Part 2: Tests - Test L: Dust and sand
DS/EN 60512-11-5:2002 Connectors for electronic equipment - Tests and measurements - Part 11-5: Climatic tests - Test 11e: Mould growth
DS/EN 60512-14-6:2006 Connectors for electronic equipment - Tests and measurements - Part 14-6: Sealing tests - Test 14f: Interfacial sealing
DS/EN 60512-3-1:2002 Connectors for electronic equipment - Tests and measurements - Part 3-1: Insulation tests - Test 3a: Insulation resistance
DS/ISO 29473:2011 Fire tests – Uncertainty of measurements in fire tests
DS/EN 60512-6-2:2002 Connectors for electronic equipment - Tests and measurements - Part 6-2: Dynamic stress tests - Test 6b: Bump
DS/EN 60512-4-1:2003 Connectors for electronic equipment - Tests and measurements - Part 4-1: Voltage stress tests - Test 4a: Voltage proof
DS/EN 60068-2-41:2001 Environmental testing - Part 2: Tests - Test Z/BM: Combined dry heat/low air pressure tests
DS/EN 60068-2-14:2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
DS/EN 60068-2-18:2001 Environmental testing - Part 2-18: Tests - Tests R and guidance: Water
DS/EN 60512-12-3/Corr. 1:2007 Connectors for electronic equipment - Tests and measurements - Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting
DS/EN 60512-12-3:2006 Connectors for electronic equipment - Tests and measurements - Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting
DS/EN 60512-9-1:2010 Connectors for electronic equipment - Tests and measurements - Part 9-1: Endurance tests - Test 9a: Mechanical operation
DS/EN 60512-14-2:2006 Connectors for electronic equipment - Tests and measurements - Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage
DS/EN 60068-2-27:2009 Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
DS/EN 60512-6-4:2002 Connectors for electronic equipment - Tests and measurements - Part 6-4: Dynamic stress tests - Test 6d: Vibration (sinusoidal)
DS/EN 60512-4-2:2002 Connectors for electronic equipment - Tests and measurements - Part 4-2: Voltage stress tests - Test 4b: Partial discharge
DS/ISO 18924:2013 Imaging materials - Test method for Arrhenius-type predictions
DS/EN 60068-2-17:1998 Basic environmental testing procedures - Part 2: Tests - Test Q: Sealing
DS/EN IEC 63047:2021 Nuclear instrumentation – Data format for list mode digital data acquisition used in radiation detection and measurement

RU-GOST R, test

GOST 20403-1975 Rubber. Method for determination hardness in international units (30 to 100 IRHD)
GOST R IEC 61724-2013 Photovoltaic system. Performance monitoring. Guidelines for measurement, data exchange and analysis
GOST 33703-2015 Oil. Determination of salts electrometric method
GOST 30726-2001 Food-stuffs. Methods for detection and determination of Escherichia coli

BELST, test

STB 1126-98 Register of measuring procedures for environmental monitoring. General provisions. Maintenance

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, test

GB/T 26140-2010 Non-destructive testing.Standards test method for determining residual stresses by neutron diffraction
GB/T 20513-2006 Photovoltaic system performance monitoring Guidelines for measurement, data exchange and analysis
GB/T 7167-1996 Test procedures for germanium gamma-ray detectors
GB/T 7167-2008 Test procedures for germanium gamma-ray detectors

International Telecommunication Union (ITU), test

ITU-R SM.2060-0-2014 Test procedure for measuring direction finder accuracy
ITU-R SM.2060-0 FRENCH-2014 Test procedure for measuring direction finder accuracy
ITU-R SM.2060-0 SPANISH-2014 Test procedure for measuring direction finder accuracy
ITU-R SM.2060-2014 Test procedure for measuring direction finder accuracy
ITU-R SM.854-3 FRENCH-2011 Direction finding and location determination at monitoring stations
ITU-R SM.854-3 SPANISH-2011 Direction finding and location determination at monitoring stations
ITU-R SM.854-3-2011 Direction finding and location determination at monitoring stations
ITU-R SM.854-2-2007 Direction finding and location determination at monitoring stations
ITU-T O.211 FRENCH-2006 Test and measurement equipment to perform tests at the IP layer
ITU-T O.211 SPANISH-2006 Test and measurement equipment to perform tests at the IP layer

Korean Agency for Technology and Standards (KATS), test

KS C 0229-2001(2011) Basic environmental testing procedures Part 2 : Tests, Test M : Low air pressure
KS C 0223-1990(2010) Basic environmental testing procedures tests-test ka : salt mist
KS C IEC 61724:2012 Photovoltaic system performance monitoring－Guidelines for measurement, data exchange and analysis
KS C IEC 61724-2012(2017) Photovoltaic system performance monitoring－Guidelines for measurement, data exchange and analysis
KS C IEC 61724-2012(2022) Photovoltaic system performance monitoring－Guidelines for measurement, data exchange and analysis
KS X ISO 19156:2019 Geographic information — Observations and measurements
KS C IEC 60068-2-11-2014(2019) Environmental testing — Part 2: Tests — Test Ka: Salt mist
KS C IEC 60068-2-2-2014(2019) Environmental testing — Part 2-2: Tests — Test B: Dry heat
KS C 2136-1996 Testing methods for complex permittivity (Dielectric constant) of solid electrical insulating materials at high frequencies and high temperatures
KS C 0284-2013 ENVIRONMENTAL TESTING PART 2 : TESTs - TEST RAND GUIDANCE : WATER
KS E 4113-1996 Detector tube type carbon monoxide measuring instrunments(Length &##8211; of - stain)
KS E 4113-1996(2011) Detector tube type carbon monoxide measuring instrunments(Length?of - stain)
KS C 0246-2001(2016) Basic environmental testing procedures Part 2：Tests-test Kd： Hydrogen sulphide test for contacts and connections
KS C IEC 61779-6:2003 Electrical apparatus for the detection and measurement of flammable gases－Part 6：Guide for the selection, installation, use and maintenance of apparatus for the detection and measurement of flammable gases
KS C IEC 60068-2-13-2014(2019) Environmental testing — Part 2-13: Tests — Test M: Low air pressure
KS I ISO 15682:2021 Water quality — Determination of chloride by flow analysis(CFA and FIA) and photometric or potentiometric detection
KS C IEC 60068-2-14-2014(2019) Environmental testing — Part 2-14: Tests — Test N: Change of temperature
KS C IEC 60068-2-6-2015(2020) Environmental testing — Part 2-6: Tests — Test Fc: Vibration(sinusoidal)
KS A 4520-1981(1996) TEST PROCEDURES FOR GERMANIUM GAMMA-RAY DETECTORS
KS A 4520-1986 TEST PROCEDURES FOR GERMANIUM GAMMA-RAY DETECTORS
KS C 6108-1997 Power and energy measuring detectors Instruments and equipment for laser radiation
KS C IEC 60068-2-68:2020 Environmental testing — Part 2-68: Tests —Test L: Dust and sand
KS C IEC 60068-2-60:2019 Environmental testing — Part 2-60: Tests —Test Ke: Flowing mixed gas corrosion test
KS C 0237-2015 Environmental testing test Cb：Damp heat, steady state

Standard Association of Australia （SAA）, test

AS 60068.2.40:2003 Environmental testing - Tests - Test Z/AM: Combined cold/low air pressure tests
AS 60068.2.1:2003 Environmental testing - Tests - Test A: Cold
IEC 60068-2-17:2023 Environmental testing — Part 2-17: Tests — Test Q: Sealing
AS 60068.2.75:2023 Environmental testing, Part 2.75: Tests — Test Eh: Hammer tests (IEC 60068-2-75:2014 (ED. 2.0) MOD)
AS 3778.6.4:1992 Measurement of water flow in open channels - Measuring devices, instruments and equipment - Echo sounders for water depth measurements
IEC 60068-2-14:2023 RLV Environmental testing — Part 2-14: Tests — Test N: Change of temperature
IEC 60068-2-14:2023 Environmental testing — Part 2-14: Tests — Test N: Change of temperature
IEC 60068-2-60:2015 RLV Environmental testing — Part 2-60: Tests — Test Ke: Flowing mixed gas corrosion test

ES-UNE, test

UNE-EN 60068-2-75:2014 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests (Endorsed by AENOR in January of 2015.)
UNE-EN IEC 60068-2-11:2021 Environmental testing - Part 2-11: Tests - Test Ka: Salt mist (Endorsed by Asociación Española de Normalización in May of 2021.)
UNE-EN 60512-22-1:2010 Connectors for electronic equipment - Tests and measurements -- Part 22-1: Capacitance tests - Test 22a: Capacitance (Endorsed by AENOR in October of 2010.)
UNE-EN ISO 22476-10:2019 Geotechnical investigation and testing - Field testing - Part 10: Weight sounding test (ISO 22476-10:2017)
UNE-EN 60512-24-1:2012 Connectors for electronic equipment - Tests and measurements - Part 24-1: Magnetic interference tests - Test 24a: Residual magnetism (Endorsed by AENOR in January of 2013.)
UNE-EN IEC 60068-2-13:2021 Environmental testing - Part 2-13: Tests - Test M: Low air pressure (Endorsed by Asociación Española de Normalización in May of 2021.)
UNE-EN 60068-2-74:1999/A1:2018 Environmental testing - Part 2-74: Tests - Test Xc: Fluid contamination (Endorsed by Asociación Española de Normalización in August of 2018.)
EN IEC 60068-2-14:2023 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
UNE-EN 60512-9-1:2010 Connectors for electronic equipment - Tests and measurements -- Part 9-1: Endurance tests - Test 9a: Mechanical operation (Endorsed by AENOR in August of 2010.)
UNE-EN 60512-12-3:2006 CORR:2007 Connectors for electronic equipment - Tests and measurements -- Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting
UNE-EN 60068-2-60:2016 Environmental testing - Part 2-60: Tests - Test Ke: Flowing mixed gas corrosion test
UNE-EN 60512-12-5:2006 CORR:2007 Connectors for electronic equipment - Tests and measurements -- Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, soldering iron method
UNE-EN IEC 60512-11-1:2019 Connectors for electrical and electronic equipment - Tests and measurements - Part 11-1: Climatic tests - Test 11a - Climatic sequence (Endorsed by Asociación Española de Normalización in August of 2019.)
UNE-EN 60512-12-4:2006 CORR:2007 Connectors for electronic equipment - Tests and measurements -- Part 12-4: Soldering tests - Test 12d: Resistance to soldering heat, solder bath method

API - American Petroleum Institute, test

API PUBL 4391-1985 Biomonitoring; Techniques for Measuring the Biological Effects of Liquid Effluents

Institute of Electrical and Electronics Engineers (IEEE), test

AIEE No.4-1942 AIEE American Standards for Measurement of Test Voltage in Dielectric Tests
IEEE Std 1260-1996 IEEE Guide on the Prediction, Measurement, and Analysis of AM Broadcast Reradiation by Power Lines
IEEE Std 1260-2018 IEEE Guide on the Prediction,Measurement, and Analysis of AM Broadcast Reradiation by Power Lines
AIEE No.4-1940 AIEE Standards for Measurement of Test Voltage in Dielectric tests
IEEE P1260/D4, May 2018 IEEE Approved Draft Guide on the Prediction, Measurement, and Analysis of AM Broadcast Reradiation by Power Lines
IEEE P1260/D3, February 2018 IEEE Draft Guide on the Prediction, Measurement, and Analysis of AM Broadcast Reradiation by Power Lines

Military Standard of the People's Republic of China-General Armament Department, test

GJB 4297-2001 Wind tunnel force measurement, pressure measurement and thermal test information collection requirements
GJB 2398-1995 Test method for technical parameters of instantaneous frequency measurement and direction finding equipment
GJB 383.11-1988 Telemetry system and subsystem test methods Telemetry antenna test methods
GJB 383.16A-1997 Telemetry system and sub-system testing methods Measurement magnetic head testing methods
GJB 383.17A-1997 Telemetry system and subsystem test methods Measurement tape test methods
GJB 383.16-1988 Telemetry system and sub-system testing methods Measurement magnetic head testing methods

European Telecommunications Standards Institute (ETSI), test

ETSI GS ISI 005-2015 Information Security Indicators (ISI); Guidelines for security event detection testing and assessment of detection effectiveness (V1.1.1)

ETSI - European Telecommunications Standards Institute, test

GS ISI 005-2015 Information Security Indicators (ISI); Guidelines for security event detection testing and assessment of detection effectiveness (V1.1.1)

国家市场监督管理总局、中国国家标准化管理委员会, test

GB/T 18852-2020 Non-destructive testing—Ultrasonic testing—Reference blocks and test procedures for the characterization of contact probe sound beams
GB/T 41448-2022 Geographic information—Observations and measurements
GB/T 40527-2021 Digital space photogrammetry—Map surveying specification
GB/T 40332-2021 Non-destructive testing—Ultrasonic testing—Characterization and verification of ultrasonic thickness measuring equipment
GB/T 37906-2019 Reclaimed water quality—Determination of mercury—Mercury analyzer method

Professional Standard - Water Conservancy, test

SL 338-2006 Code for hydrologic boat surveying
SL 362-2006 Instrument for dam monitoring.inclino meter

Aeronautical Radio Inc., test

ARINC 738-3 ITEM 9.0-2001 Built-In Test Equipment (Bite)

ISA - International Society of Automation, test

ISA FUND TST MEAS INSTA-2006 Fundamentals of Test Measurement Instrumentation
ISA MNTRNG MEAS I&C PERF NUC PWR PLNT-2014 Monitoring and Measuring I&C Performance in Nuclear Power Plants

Association of German Mechanical Engineers, test

VDI/VDE 3514 Blatt 2-2013 Measurement of humidity - Methods of measurement
VDI 3489 Blatt 3-1997 Particulate matter measurement - Methods of characterizing and monitoring test aerosols - Optical particle counter
VDI 3489 Blatt 8-1996 Particulate matter measurement - Methods for characterizing and monitoring test aerosols - Time-of-flight spectrometer
VDI/VDE 2617 Blatt 8-2006 Accuracy of coordinate measuring machines - Characteristics and their testing - Test suitability of measurements with coordinate measuring machines
DVS 2212-1-1981
VDI/VDE/DGQ 2618 Blatt 13.1-2005 Inspection of measuring and test equipment - Test instructions for lever gauges (quicktests) for internal measurements
VDI/VDE/DGQ 2618 Blatt 12.1-2005 Inspection of measuring and test equipment - Test instruction for lever gauges (quicktests) for external measurement
DVS 2212-1-2005
VDI 3786 Blatt 13-2006 Environmental meteorology - Meteorological measurements - Measuring station
VDI 2452 Blatt 2-1975 Gaseous air pollution measurement; determination of fluoric ion concentration; preseparation and electrometric detection
VDI/VDE 2631 Blatt 9-2014 Form measurement - Examples for measurement and analysis conditions
VDI/VDE 2631 Blatt 9-2003 Form measurement - Examples for measurement and analysis conditions

CU-NC, test

NC 40-69-1984 Textiles. Determination of Length by Measurement of Single Chemical Staple Fibres Testing Method
NC 04-79-1987 Materials Testing. Steel Abrasive Wear Testing. Testing Equipment
NC 04-65-1985 Materials Testing. Determination of Metallic Powders Fluid Testing Method
NC 26-174-1987 Drugs. Determination of Heavy Metals. Testing Methods
NC 04-78-1987 Materials Testing. Determination of Superficially Hardened Layer Depth. Testing Methods
NC 26-76-1990 Drugs. Determination of Total Ashes. Testing Method
NC 31-13-1987 Rubber. Determination of Abrasion Resistance. Testing Method
NC 40-130-1987 Textiles. Determination of Whiteness Degree. Testing Methods
NC 40-128-1987 Textiles. Determination of Stitch Density. Testing Methods
NC 30-63-1987 Plastics. Determination of Plasticizer Migration Testinq Method

International Electrotechnical Commission (IEC), test

IEC 61724:1998 Photovoltaic system performance monitoring - Guidelines for measurement, data exchange and analysis
IEC 61557-10:2013 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. equipment for testing, measuring or monitoring of protective measures - Part 10: Combined measuring equipment for testing, measuring or monitoring of protective measur
IEC 60068-2-60:2015 Environmental testing - Part 2-60: Tests - Test Ke: Flowing mixed gas corrosion test

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., test

IEEE 1260-1996 Guide on the Prediction@ Measurement@ and Analysis of AM Broadcast Reradiation by Power Lines
IEEE 1260-2018 Guide on the Prediction@ Measurement@ and Analysis of AM Broadcast Reradiation by Power Lines
IEEE P1260/D4-2018 Draft Guide for the Prediction@ Measurement@ and Analysis of AM Broadcast Reradiation by Power Lines
IEEE P1260/D3-2018 Draft Guide for the Prediction@ Measurement@ and Analysis of AM Broadcast Reradiation by Power Lines
IEEE 4-1942 MEASUREMENT OF TEST VOLTAGE IN DIELECTRIC TESTS
IEEE 4-1940 MEASUREMENT OF TEST VOLTAGE IN DIELECTRIC TESTS
IEEE SYNCHROPHASOR MEASUREMENT TSS-2014 Synchrophasor Measurement Test Suite Specification

AENOR, test

UNE-EN 61724:2000 Photovoltaic system performance monitoring - Guidelines for measurement, data exchange and analysis.
UNE-EN 60068-2-11:2000 ENVIRONMENTAL TESTING. PART 2: TESTS. TEST KA: SALT MIST
UNE-EN 60068-2-13:2000 ENVIRONMENTAL TESTING. PART 2: TESTS. TEST M: LOW AIR PRESSURE
UNE-EN 60068-2-17:1996 ENVIRONMENTAL TESTING. PART 2: TESTS. TEST Q: SEALING.
UNE-EN 60068-2-44:1996 ENVIRONMENTAL TESTING. PART 2: TESTS. GUIDANCE ON TEST T: SOLDERING.
UNE-EN 60068-2-74:2000 Environmental testing. Part 2: Tests. Test Xc: Fluid contamination.
UNE-EN 60512-11-11:2003 Connectors for electronic equipment - Tests and measurements -- Part 11-11: Climatic tests - Test 11k: Low air pressure.
UNE-EN 60068-2-40:2000 Environmental testing -- Part 2: Tests - Test Z/AM: Combined cold/low air pressure tests
UNE-EN 60068-2-68:1997 ENVIRONMENTAL TESTING. PART 2: TESTS. TEST L: DUST AND SAND.
UNE-EN 60512-11-5:2002 Connectors for electronic equipment - Tests and measurements -- Part 11-5: Climatic tests - Test 11e: Mould growth.
UNE-EN 60512-3-1:2002 Connectors for electronic equipment - Tests and measurements -- Part 3-1: Insulation tests - Test 3a: Insulation resistance.
UNE-EN 60512-11-6:2003 Connectors for electronic equipment - Tests and measurements -- Part 11-6: Climatic tests - Test 11f: Corrosion, salt mist.
UNE-EN 60512-6-2:2002 Connectors for electronic equipment - Tests and measurements -- Part 6-2: Dynamic stress tests - Test 6b: Bump.
UNE-EN 60512-6-3:2002 Connectors for electronic equipment - Tests and measurements -- Part 6-3: Dynamic stress tests - Test 6c: Shock.
UNE-EN 60068-2-41:2000 Environmental testing -- Part 2: Tests - Test Z/BM: Combined dry heat/low air pressure tests
UNE-EN 60068-2-18:2001 Environmental testing -- Part 2-18: Tests - Tests R and guidance: Water.
UNE-EN 60068-2-6:2008 Environmental testing- Part 2-6: Tests- Test Fc: Vibration (sinusoidal)
UNE 40152:1984 METHOD OF TEST FOR THE MEASURE OF LIBRE LENGTH BY INDIVIDUAL FIBRES TESTING
UNE-EN 60512-4-2:2002 Connectors for electronic equipment - Tests and measurements -- Part 4-2: Voltage stress tests - Test 4b: Partial discharge.
UNE-EN 60512-6-1:2002 Connectors for electronic equipment - Tests and measurements -- Part 6-1: Dynamic stress tests - Test 6a: Acceleration, steady state.

SE-SIS, test

SIS SS 64 12 22-1984 Surveying instruments - Theodolites - Testing - A ccuracy of angular measurement
SIS SS-IEC 973:1990 Nuclear instrumentation — Test procedures for germanium gamma-ray detectors
SIS SS IEC 430:1983 Nuclear instrumentation - Test procedvres for germanium gamma-ray detectors
SIS SS 81 73 41-1989 Doors — Measurements of general flatness of door leaves — Testing
SIS SS 02 52 62-1986 Building acoustics - Lead-through units -Measurement of sound insulation - Test methods

Guizhou Provincial Standard of the People's Republic of China, test

DB52/T 1332-2018 Virtual drive test measurement specification for satellite navigation and positioning module of intelligent terminal

BR-ABNT, test

ABNT NBR 13517-2010 Optical cables - Abrasion test - Method of test
ABNT MB-210-1979

KR-KS, test

KS X ISO 19156-2019 Geographic information — Observations and measurements
KS I ISO 15682-2021 Water quality — Determination of chloride by flow analysis(CFA and FIA) and photometric or potentiometric detection
KS C IEC 61779-1-2003(2023)
KS C IEC 60068-2-68-2020 Environmental testing — Part 2-68: Tests —Test L: Dust and sand
KS C IEC 60068-2-60-2019 Environmental testing — Part 2-60: Tests —Test Ke: Flowing mixed gas corrosion test

CZ-CSN, test

CSN 72 2518-1959 Stone measuring marks, station, boarder, direction and railing stones
CSN 58 8772-1994 Methods of test for fats and oils Determination and detection of ethyl and propyl ester of p-hydroxybenzoic acid
CSN 64 7032-1979 Testing of synthetic leather. Tear strength
CSN 70 0556-1962 Testing of glass containers. Determination of thickness of glass
CSN 70 0552-1961 Testing of glass containers. Determination of seam height.

Electronic Components, Assemblies and Materials Association, test

ECA EIA-364-87A-2009 TP-87A NANOSECOND EVENT DETECTION TEST PROCEDURE FOR ELECTRICAL CONNECTORS, CONTACTS AND SOCKETS
EIA/ECA-364-18B-2007 TP-18B Visual and Dimensional Inspection Test Procedure for Electrical Connectors and Sockets

Lithuanian Standards Office , test

LST EN 60068-2-75-1999 Environmental testing. Part 2: Tests. Test Eh: Hammer tests (IEC 60068-2-75:1997)
LST EN 61724-2001 Photovoltaic system performance monitoring. Guidelines for measurement, data exchange and analysis (IEC 61724:1998)
LST EN 60512-11-10-2003 Connectors for electronic equipment. Tests and measurements. Part 11-10: Climatic tests. Test 11j: Cold (IEC 60512-11-10:2002)
LST EN 60068-2-17-2001 Environmental testing. Part 2: Tests. Test Q: Sealing (IEC 60068-2-17:1994)
LST EN 60512-11-9-2003 Connectors for electronic equipment. Tests and measurements. Part 11-9: Climatic tests. Test 11i: Dry heat (IEC 60512-11-9:2002)
LST EN 60512-22-1-2010 Connectors for electronic equipment - Tests and measurements -- Part 22-1: Capacitance tests - Test 22a: Capacitance (IEC 60512-22-1:2010)

PL-PKN, test

PN E04040-01-1991 Optical radiation measurements Photometric measurements Measurement and determination of luminous flux
PN E04040-02-1991 Optical radiation measurements Photometric measurements Measurement of luminous intensity
PN C04517-1954 Chemical testings and tests -- Determination of water-insoluble substances in chemical products
PN M36162-1991 Reciprocating internal combusion engines. Performance. Test measurements
PN C04576 ArkusZ11-1973 Water and waste water Tests for nitrogen Determination of organie nitrogen
PN Z04010-1967 Air dusting protection Measurement ot dust fali by means of measurement plates
PN C04576 ArkusZ13-1973 Water and waste water Tests for nilrogen Determination of albuminous nitrogen
PN P04600-1991 Textiles. Determination of the precision of test methods by inter-laboratory tests

United States Navy, test

NAVY MIL-T-5486 C NOTICE 2-1996 TEST SET, MAGNETIC DETECTOR AN/ASM-4
NAVY MIL-T-5486 C VALID NOTICE 1-1958 TEST SET, MAGNETIC DETECTOR AN/ASM-4
NAVY MIL-T-5486 C-1956 TEST SET, MAGNETIC DETECTOR AN/ASM-4
NAVY MIL-T-8688-1954 TESTER; ENGINE TACHOMETER

ZA-SANS, test

SANS 5807:1979 Pesticides: Test rooms, test conditions, test equipment, and test insects and their handling

IT-UNI, test

UNI 7366-P5-1974

European Committee for Electrotechnical Standardization（CENELEC）, test

EN 61724:1998 Photovoltaic System Performance Monitoring Guidelines for Measurement, Data Exchange and Analysis
EN IEC 60068-2-11:2021 Environmental testing - Part 2-11: Tests - Test Ka: Salt mist
EN IEC 60068-2-13:2021 Environmental testing - Part 2-13: Tests - Test M: Low air pressure
EN 60068-2-27:2009 Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock

Professional Standard - Traffic, test

JT/T 32.14-1993 Transportation industry workers technical grade standard navigation mark navigation depth sounder repairman

American Welding Society (AWS), test

AWS HOT-1987 Hands-On Training use of Measuring Tools for the AWS Certified Welding Inspector Hands-On Examination

ECIA - Electronic Components Industry Association, test

EIA-364-87A-2009 TP-87A NANOSECOND EVENT DETECTION TEST PROCEDURE FOR ELECTRICAL CONNECTORS@ CONTACTS AND SOCKETS

未注明发布机构, test

BS EN 60068-2-32:1993(1998) Environmental testing — Part 2.1 : Tests — Test Ed : Free fall
DIN EN 60068-2-18 Berichtigung 1:2003 Environmental Testing – Part 2-18: Testing, Test R and Guidance: Water
DIN EN 60068-2-14:2000 Environmental tests Part 2: Tests – Test N: Temperature changes
DIN EN 60068-2-18 Ber:2003 Environmental Testing – Part 2-18: Testing, Test R and Guidance: Water
BS EN ISO 15682:2001(2008)*BS 6068-2.71:2000 Water quality — Determination of chloride by flow analysis (CFA and FIA) and photometric or potentiometric detection
BS EN ISO 16264:2004(2009)*BS 6068-2.78:2002 Water quality — Determination of soluble silicates by flow analysis (FIA and CFA) and photometric detection
BS EN 60068-2-29:1993(1998) Environmental testing — Part 2 : Tests — Test Eb and guidance : Bump
BS EN 60512-12-3:2006(2007) Connectors for electronic equipment — Tests and measurements — Part 12 - 3 : Soldering tests — Test 12c : Solderability, de - wetting

Professional Standard - Electron, test

SJ 1185-1977 Color television test pattens(Provisional)

Cooling Technology Institute, test

CTI ATC-128-2014 Test Code for Measurement of Sound from Water-Cooling Towers

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, test

ITU-R SM.854-1992 Direction Finding at Monitoring Stations of Signals Below 30 MHz

TR-TSE, test

TS 466-1967 DETERMINATION OF CLEAN WOOL CONTENT BY ?CORE? TESTING
TS 2438-1976 Liquid Flow Measurement In Open Channels - Sounding find Suspension Equiment

IN-BIS, test

IS 8690-1977
IS 13749-1993 Automotive vehicle. Determination of H-point. Method of test
IS 548 Pt.2/Sec.20-1983

North Atlantic Treaty Organization Standards Agency, test

STANAG 4587-2007 CLOSE-IN LAND MINE DETECTOR TEST PROCEDURES

Professional Standard - Military and Civilian Products, test

WJ 2264-2005 Test method of photodetector with predischarge

Professional Standard - Aviation, test

HB 3422-1983 Adjustable bow type measuring instrument (range of measurement: 50~300)
HB 3421-1983 Adjustable tubular type measuring instrument (range of measurement: 340~1000)
HB 3423-1983 Adjustable bow type measuring instrument (range of measurement: 300~500)
HB 3420-1983 Adjustable flat plate type measurement instrument (range of measurement: 200~1000)
HB 3419-1983 Adjustable flat plate type measurement instrument (range of measurement: 75~200)

Ningxia Provincial Standard of the People's Republic of China, test

DB64/T 946-2014 Technical Regulations for Monitoring and Forecasting Alfalfa Thrips

Underwriters Laboratories (UL), test

UL 217-1993 Single and multiple station smoke detectors
UL 217-1997 Single and multiple station smoke alarms
UL 539-1991 Single and multiple station heat detectors

Professional Standard - Machinery, test

JB/T 12639-2016 Quick video measuring machine

BE-NBN, test

NBN S 21-018-1974 Rescue and firefightingmaterial — Portable fire-extinguishers — Vibration test — Efficiency test — Dielectiic test — Test report — Agreement certificale

National Association of Corrosion Engineers (NACE), test

NACE TM0106-2006 Detection, Testing, and Evaluation of Microbiologically Influenced Corrosion (MIC) on External Surfaces of Buried Pipelines (Item No. 21248)

中国气象局, test

QX/T 559-2020 Wind energy resource observation system wind tower observation technical requirements

National Metrological Verification Regulations of the People's Republic of China, test

JJG(建设) 0003-1996 Verification Regulation of Measuring Subsystem of Pile Dynamic Testing Instruments

TIA - Telecommunications Industry Association, test

TIA/EIA-455-2C-1998 FOTP-2 Impact Test Measurements for Fiber Optic Devices
TIA-455-2B-1990 FOTP-2 Impact Test Measurements for Fiber Optic Devices

National Metrological Technical Specifications of the People's Republic of China, test

JJF 1612-2017 Calibration Specification for Non-contact Ranging Speedometer

ACI - American Concrete Institute, test

ACI SP-241 CD-2007 Concrete Heat Development: Monitoring@ Prediction & Management

CENELEC - European Committee for Electrotechnical Standardization, test

HD 323.2.20 S3-1988 Basic Environmental Testing Procedures-Part 2: Tests Test T: Soldering

American Society of Mechanical Engineers (ASME), test

ASME N-545-2001 Alternative Requirements for Conduct of Performance Demonstration Detection Test of Reactor Vessel Section XI, Division 1