ZH
RU
ES

Gas tight and liquid tight

Gas tight and liquid tight, Total:500 items.

In the international standard classification, Gas tight and liquid tight involves: Seals, glands, Construction materials, Pipeline components and pipelines, Rubber and plastics products, Road vehicle systems, Energy and heat transfer engineering in general, Non-textile floor coverings, Protective equipment, Aerospace fluid systems and components, Fluid power systems, Electrical accessories, Coatings and related processes used in aerospace industry, Aerospace engines and propulsion systems, Shipbuilding and marine structures in general, Vacuum technology, Fasteners, Valves, Installations in buildings, Materials for aerospace construction, Semiconductor devices, Equipment for the chemical industry, Non-destructive testing, Welding, brazing and soldering, Measurement of fluid flow, Pharmaceutics, Analytical chemistry, Electrical equipment for working in special conditions, Vocabularies, Magnetic materials, Petroleum, petroleum products and natural gas handling equipment, Road vehicles in general, Galvanic cells and batteries, Fertilizers, Protection against electric shock, Fluid storage devices, Electrical engineering in general, Insulation, Cans. Tins. Tubes, Capacitors, Packaging materials and accessories, Tyres, Rubber, Environmental testing, Surface treatment and coating, Environmental protection, Explosion protection, Wastes, Fuels, Freight distribution of goods.


Japanese Industrial Standards Committee (JISC), Gas tight and liquid tight

  • JIS K 6820:1995 Fluid sealants
  • JIS K 6820 AMD 1:2006 Fluid sealants (Amendment 1)
  • JIS B 8394-2:2000 Hydraulic fluid power -- Housings for elastomer-energized, plastic-faced seals -- Dimensions and tolerances -- Part 2: Rod seal housings
  • JIS B 8394-1:2000 Hydraulic fluid power -- Housings for elastomer-energized, plastic-faced seals -- Dimensions and tolerances -- Part 1: Piston seal housings
  • JIS B 2409:2002 Hydraulic fluid power -- Sealing devices -- Standard test methods to assess the performance of seals used in oil hydraulic reciprocating applications
  • JIS Z 7302-9:2002 Densified refuse derived fuel -- Part 9: Test method for apparent bulk density

National Aeronautics and Space Administration (NASA), Gas tight and liquid tight

  • NASA-TN-D-8151-1976 Fundamentals of fluid sealing
  • NASA-CR-213199 VOL 5-2004 Numerical, Analytical, Experimental Study of Fluid Dynamic Forces in Seals Volume 5-Description of Seal Dynamics Code DYSEAL and Labyrinth Seals Code KTK

US-GSA, Gas tight and liquid tight

German Institute for Standardization, Gas tight and liquid tight

  • DIN EN 682:2006 Elastomeric seals - Material requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids (includes Amendment A1:2005); English version of DIN EN 682:2006-10
  • DIN 83403:2007 Manhole covers for bunkers and tanks on ships - Seals
  • DIN ISO 7425-1:1990 Hydraulic fluid power; housings for elastomer-energized, plastic-faced seals; dimensions and tolerances; piston seal housings; identical with ISO 7425-1:1988
  • DIN EN 682:2006-10 Elastomeric seals - Material requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids; German version EN 682:2002 + A1:2005
  • DIN ISO 9090:1990 Gas tightness of equipment for gas welding and allied processes; identical with ISO 9090:1989
  • DIN ISO 7425-2:1990 Hydraulic fluid power; housings for elastomer-energized, plastic-faced seals; dimensions and tolerances; rod seal housings; identical with ISO 7425-2:1989
  • DIN ISO 7425-2:1990-11 Hydraulic fluid power; housings for elastomer-energized, plastic-faced seals; dimensions and tolerances; rod seal housings; identical with ISO 7425-2:1989
  • DIN ISO 7425-1:1990-04 Hydraulic fluid power; housings for elastomer-energized, plastic-faced seals; dimensions and tolerances; piston seal housings; identical with ISO 7425-1:1988
  • DIN ISO 6547:1983 Hydraulic fluid power-cylinder; piston seal housings incorporating bearing rings; dimensions and tolerances
  • DIN EN 12308:1998 Installations and equipment for liquefied natural gas - Suitability testing of gaskets designed for flanged joints used on LNG piping; German version EN 12308:1998
  • DIN EN ISO 1179-3:2008 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) (ISO 1179-3:2007); Ger
  • DIN EN 60749-8:2003 Semiconductor devices - Mechanical and climatic test methods - Part 8: Sealing (IEC 60749-8:2002 + Corr. 1:2003 + Corr. 2:2003); German version EN 60749-8:2003
  • DIN EN 60749-8:2003-12 Semiconductor devices - Mechanical and climatic test methods - Part 8: Sealing (IEC 60749-8:2002 + Corr. 1:2003 + Corr. 2:2003); German version EN 60749-8:2003 / Note: Under certain conditions, DIN EN 60749 (2002-09) remains valid alongside this standa...
  • DIN 3535-1:1991 Sealants for gas supplies; elastomeric gasket materials for gas valves in domestic installations; requirements and tests
  • DIN 3771-2:1984 Fluid systems; O-rings; test, marking
  • DIN EN 12377:1998 Packaging - Flexible tubes - Test method for the air tightness of closures; German version EN 12377:1998
  • DIN EN ISO 1179-2:2008 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2007); Ge
  • DIN 7754:1978-08 Sealing caps for grape-juice bottles and balloons
  • DIN EN 3630:2008 Aerospace series - Fluid fittings, flanged, straight - Sealing by O-ring for 0,8 mm thick tubes; German and English version EN 3630:2008
  • DIN EN 681-2:2006-11 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers; German version EN 681-2:2000 + A1:2002 + A2:2005
  • DIN EN ISO 1179-4:2008 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-to-metal sealing (type B) (ISO 1179-4:2007); German version EN ISO 1179
  • DIN 52452-2:2015 Testing of sealants in building construction - Compatibility of sealants - Part 2: Change of adhesion/cohesion properties after immersion in chemical liquids
  • DIN 28138-3:2006 Rotating mechanical seals for agitator shafts - Part 3: Connections for barries fluids, cooling, control and mounting and designation system for rotating mechanical seals
  • DIN EN 681-4:2006 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 4: Cast polyurethane sealing elements (includes Amendments A1:2002 + A2:2005); English version of DIN EN 681-4:2006-11
  • DIN EN ISO 10563:2005 Building construction - Sealants - Determination of change in mass and volume (ISO 10563:2005); English version of DIN EN ISO 10563
  • DIN 52452-2:2015-07 Testing of sealants in building construction - Compatibility of sealants - Part 2: Change of adhesion/cohesion properties after immersion in chemical liquids
  • DIN 3771-1:1984 Fluid systems; O-rings; dimensions as in ISO 3601/1
  • DIN 3771-3:1984 Fluid systems; O-rings; materials, field of application
  • DIN EN 3631:2008 Aerospace series - Fluid fittings, flanged, 90° elbowed - Sealing by O-ring for 0,8 mm thick tubes; German and English version EN 3631:2008
  • DIN 3535-5:2020 Seals for gas supply ？ Part 5: Sealing materials of rubber, cork and synthetic fibres for gas fittings and gas appliances
  • DIN EN 751-1:1997 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 1: Anaerobic jointing compounds; German version EN 751-1:1996
  • DIN 83403:1986 Manhole covers for bunkers and tanks on ships; seals
  • DIN ISO 5597:1988 Hydraulic fluid power; cylinders; housings for piston and rod seals in reciprocating applications; dimensions and tolerances; identical with ISO 5597:1987
  • DIN 30658-1:1998 Materials for the subsequent sealing of joints in underground gas mains - Part 1: Plastic foil and textile fibre linings used to seal gaspipes already in place; safety requirements and testing

Association Francaise de Normalisation, Gas tight and liquid tight

  • NF T47-306*NF EN 682:2003 Elastomeric seals - Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids
  • NF E48-034:1990 Hydraulic fluid power. Cylinders. Seal housing for low-friction rods. Dimensions.
  • NF T47-306/A1*NF EN 682/A1:2005 Elastomeric seals - Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids
  • NF E48-034-2*NF ISO 7425-2:2021 Hydraulic fluid power cylinders - Dimensions and tolerances of housings for elastomer-energized, plastic-faced seals - Part 2 : rod seal housings
  • NF E48-034-1:2006 Hydraulic fluid power - Housings for elastomer-energized, plastic-faced seals - Dimensions and tolerances - Part 1 : piston seal housing.
  • NF ISO 7425-1:2021 Vérins hydrauliques - Dimensions et tolérances des logements pour joints en élastomère renforcé par des matières plastiques - Partie 1 : logements de joints de piston
  • NF ISO 7425-2:2021 Vérins hydrauliques - Dimensions et tolérances des logements pour joints en élastomère renforcé par des matières plastiques - Partie 2 : logements de joints de tige
  • NF E48-034-1*NF ISO 7425-1:2021 Hydraulic fluid power cylinders - Dimensions and tolerances of housings for elastomer-energized, plastic-faced seals - Part 1 : piston seal housings
  • NF E48-034-2:2006 Hydraulic fluid power - Housings for elastomer-energized, plastic-faced seals - Dimensions and tolerances - Part 2 : rod seal housings.
  • NF A09-490:1988 NON DESTRUCTIVE TESTING. TESTING FOR LEAK TIGHTNESS. RECOMMENDED PRACTICES FOR THE SPECIFICATION AND TESTING OF GAS-TIGHTNESS.
  • NF T48-105:1994 Asbestos and rubber compressed sheets for seals. Liquid immersion test.
  • NF EN ISO 9974-2:2000 Raccordements pour applications générales et transmissions hydrauliques et pneumatiques - Orifices et éléments mâles à filetage ISO 261 et joint en élastomère ou étanchéité métal sur métal - Partie 2 : éléments mâles avec joint en élas...
  • NF E48-040:1993 Hydraulic fluid power. Cylinders. Seal housings for rods and pistons. Dimensions.
  • NF EN 681-2/A1:2003 Garnitures d'étanchéité en caoutchouc - Spécification des matériaux pour garnitures d'étanchéité utilisées dans le domaine de l'eau et du drainage - Partie 2 : élastomères thermoplastiques
  • NF E48-039:1987 Hydraulic fluid power. Cylinders. Seal-incorporating bearing ring housing for pistons. Dimensions.
  • NF E48-372-2*NF ISO 6194-2:2009 Rotary-shaft lip-type seals incorporating elastomeric sealing elements - Part 2 : vocabulary.
  • NF P18-730/NA:2008 Eurocode 2 : design of concrete structures - Part 3 : liquid retaining and containment structures - National annex to NF EN 1992-3:2006 - Liquid retaining and containment structures.
  • NF E48-065-2*NF EN ISO 9974-2:2000 Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 2 : stud ends with elastomeric sealing (type E)
  • NF C96-022-8*NF EN 60749-8:2003 Semiconductor devices - Mechanical and climatic test methods - Part 8 : sealing
  • NF EN 60749-8:2003 Dispositifs à semiconducteurs - Méthodes d'essais mécaniques et climatiques - Partie 8 : étanchéité
  • NF ISO 6194-3:2012 Bagues d'étanchéité à lèvres pour arbres tournants incorporant des éléments d'étanchéité en élastomère - Partie 3 : stockage, manipulation et montage
  • NF EN 3869:2005 Série aérospatiale - Raccords, brides amovibles et joints - Joints en élastomère fluorocarbone et armature en alliage d'aluminium
  • NF EN 751-2:1997 Matériaux d'étanchéité pour raccords filetés en contact des gaz de la 1ère, 2ème et 3ème famille et de l'eau chaude - Partie 2 : composition d'étanchéité non durcissante.
  • NF E29-122:1952 STOPCOCKS AND CONTROL COCKS FOR LOW PRESSURE GAS EQUIPMENT. PLUGS,BORES AND SEALING DIMENSIONS.
  • NF D36-106-1*NF EN 751-1:1997 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water. Part 1 : anaerobic jointing compounds.
  • NF M88-088:1974 Leak tightness and protection of road tankers for the transportation of liquids of classes Ⅲ α,Ⅳα and Ⅴ not belonging to the hydrocarbon category
  • NF T48-106:1994 ASBESTOS AND RUBBER COMPRESSED SHEETS FOR SEALS. BREAKING STRENGTH AFTER LIQUID IMMERSION.
  • NF E48-371:1994 Hydraulic fluid power. Rotary shaft lip type seals. Dimensions and characteristics of housing and shaft.
  • NF E29-951:2007 Lenses and lens-shaped seals for flat or raised face flanges - PN 63 to PN 160 - Specifications
  • NF L43-230*NF EN 3630:2008 Aerospace series - Fluid fittings, flanged, straight - Sealing by O-ring for 0,8 mm thick tubes
  • NF L46-311:1964 Aircraft fluid installations. Screwed sealing plugs (rech.).
  • NF EN 751-1:1997 Matériaux d'étanchéité pour raccords filetés en contact des gaz de la 1ère, 2ème et 3ème famille et de l'eau chaude - Partie 1 : composition d'étanchéité anaérobie.
  • NF E48-050-1:2007 Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 threads and O-ring sealing - Part 1 : ports with truncated housing for O-ring seal.
  • NF E48-372-4*NF ISO 6194-4:2012 Rotary shaft lip-type seals incorporating elastomeric sealing elements - Part 4 : performance test procedures.
  • NF L43-231*NF EN 3631:2014 Aerospace series - Fluid fittings, flanged, 90o elbowed - Sealing by O-ring for 0,8 mm thick tubes
  • NF ISO 6194-5:2012 Bagues d'étanchéité à lèvres pour arbres tournants incorporant des éléments d'étanchéité en élastomère - Partie 5 : identification des imperfections visuelles
  • NF ISO 9974-4:2017 Raccordements pour applications générales et transmissions hydrauliques et pneumatiques - Orifices et éléments mâles à filetage ISO 261 et joint en élastomère ou étanchéité métal sur métal - Partie 4 : dimensions, conception, méthodes d'...
  • NF E48-035:1993 Hydraulic fluid power. Cylinders. Pistons housings for elastomer-energized, plastic-faced seals Dimensions and tolerances.
  • NF P85-502:2005 Building construction - Sealants - Determination of change in mass and volume.
  • NF E49-051-2*NF EN ISO 1179-2:2014 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2 : heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)
  • NF P85-502:1998 Building construction. Sealants for joints. Determination of change in mass and volume.
  • NF A09-492:1989 Non destructive testing. Tightness testing. Method under vacuum with tracer gras.
  • NF EN ISO 9974-3:2000 Raccordements pour applications générales et transmissions hydrauliques et pneumatiques - Orifices et éléments mâles à filetage ISO 261 et joints en élastomère ou étanchéité métal sur métal - Partie 3 : éléments mâles avec étanchéité...
  • NF EN ISO 9974-1:2000 Raccordements pour applications générales et transmissions hydrauliques et pneumatiques - Orifices et éléments mâles à filetage ISO 261 et joints en élastomère ou étanchéité métal sur métal - Partie 1 : orifices filetés
  • NF D36-106-2*NF EN 751-2:1997 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water. Part 2 : non-hardening jointing compounds.
  • NF E48-065-3*NF EN ISO 9974-3:2000 Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3 : stud ends with metal-to-metal sealing (type B)

GM Daewoo, Gas tight and liquid tight

CZ-CSN, Gas tight and liquid tight

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Gas tight and liquid tight

  • GB/T 23658-2009 Elastomeric seals.Material requirement for seals used in pipes and fittings carring gaseous fuels and hydricarbon fluid
  • GB/T 21874-2008 Elastomeric seals.Requirements for materials for pipe joint seals used in water and drainage applications.Thermoplastic elastomers
  • GB/T 13871.6-2022 Rotary shaft lip-type seals incorporating elastomeric sealing elements—Part 6：Specification of elastomeric materials
  • GB/T 3452.5-2022 O-rings for fluid power systems—Part 5：Specification of elastomeric materials
  • GB/T 13871.2-2015 Rotary shaft lip-type seals incorporating elastomeric sealing elements.Part 2:Vocabulary
  • GB/T 13871.1-2022 Rotary shaft lip-type seals incorporating elastomeric sealing elements—Part 1:Dimensions and tolerances
  • GB/T 11023-1989 Test guide of SF6 gas tightness for high-voltage switchgear
  • GB/T 13871.1-2007 Rotary shaft lip type seals incorporating elastomeric sealing elements.Part 1:Nominal dimensions and tolerances
  • GB/T 13871.3-2008 Rotary shaft lip-type seals incorporating elastomeric sealing elements.Part 3: Storage, handling and installation
  • GB/T 15242.1-1994 Hydraulic fluid power-Cylinder rod and piston seals for reciprocating applications of co-axial seals-Dimensions and tolerances
  • GB/T 13871.4-2007 Rotary shaft lip type seals incorporating elastomeric sealing elements.Part 4:Performance test procedures
  • GB/T 3452.3-2005 Housing dimensions for O-ring elastomer seals in hydraulic and pneumatic applications
  • GB/T 13871.5-2015 Rotary shaft lip-type seals incorporating elastomeric sealing elements.Part 5: Identification of visual imperfections
  • GB 29334-2012 Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid
  • GB/T 15242.3-1994 Hydraulic fluid power-Cylinder rod and piston seals for reciprocating applications of Co-axial seals-Dimensions and tolerances of housings

Korean Agency for Technology and Standards (KATS), Gas tight and liquid tight

  • KS M ISO 16010:2007 Elastomeric seals-Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids
  • KS W 1526-2002(2012) Packings and gaskets preformed petroleum hydraulic fluid resistant
  • KS M ISO 16010-2007(2017) Elastomeric seals－Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids
  • KS B ISO 7425-1-2006(2016) Hydraulic fluid power － Housings for elastomer－energized, plastic－faced seals － Dimensions and tolerances － Part 1: Piston seal housings
  • KS B ISO 7425-1:2006 Hydraulic fluid power－Housings for elastomer－energized, plastic－faced seals－Dimensions and tolerances－Part 2：Rod seal housings
  • KS F 3215-2021 Standard specification for building gaskets and building structural gaskets — Materials in preformed solid vulcanizates used for sealing glazing and panels
  • KS B ISO 7425-2:2006 Hydraulic fluid power－Housings for elastomer－energized, plastic－faced seals－Dimensions and tolerances－Part 2：Rod seal housings
  • KS B ISO 7425-2-2006(2021) Hydraulic fluid power －Housings for elastomer－energized, plastic－faced seals － Dimensions and tolerances － Part 2: Rod seal housings
  • KS B ISO 7425-1-2006(2021) Hydraulic fluid power － Housings for elastomer－energized, plastic－faced seals － Dimensions and tolerances － Part 1: Piston seal housings
  • KS M ISO 6447:2009 Rubber seals－Joint rings used for gas supply pipes and fittings－Specification for material
  • KS M ISO 23711-2007(2017) Elastomeric seals－Requirements for materials for pipe joint seals used in water and drainage applications－Thermoplastic elastomers
  • KS B ISO 5597-2002(2012) Hydraulic fluid power－Cylinders－Housing for piston and rod seals in reciprocating applications－Dimensions and tolerances
  • KS M ISO 23711-2007(2022) Elastomeric seals－Requirements for materials for pipe joint seals used in water and drainage applications－Thermoplastic elastomers
  • KS C 8515-2003 Sealed nickel-cadmium, cylindrical rechargeable single cells
  • KS C 8515-1987 Sealed nickel-cadmium, cylindrical rechargeable single cells
  • KS C 8515-1982 Sealed nickel-cadmium, cylindrical rechargeable single cells
  • KS C IEC 60749-8:2006 Semiconductor devices－Mechanical and climatic test methods－Part 8：Sealing
  • KS C IEC 60749-8-2006(2021) Semiconductor devices－Mechanical and climatic test methods－Part 8：Sealing
  • KS C IEC 60749-8-2006(2016) Semiconductor devices－Mechanical and climatic test methods－Part 8：Sealing
  • KS M ISO 9727-6:2020 Cylindrical cork stoppers — Physical tests —Part 6: Determination of liquid tightness
  • KS B ISO 11926-1-2003(2008) Connections for general use and fluid power－Ports and stud ends with ISO 725 threads and O-ring sealing－Part 1：Ports with O-ring seal in truncated housing
  • KS R 2026-2007 Tyre valve core housing and spuds for automobiles
  • KS R 2026-1982 Tyre valve core housing and spuds for automobiles
  • KS B ISO 6149-1-2004(2009) Connections for fluid power and general use－Ports and stud ends with ISO 261 threads and O-ring sealing－Part 1：Ports with O-ring seal in truncated housing
  • KS B ISO 9974-2-2004(2009) Connections for general use and fluid power－Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing－Part 2：Stud ends with elastomeric sealing(type E)

International Organization for Standardization (ISO), Gas tight and liquid tight

  • ISO 16010:2005 Elastomeric seals - Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids
  • ISO 16010:2019 Elastomeric seals — Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids
  • ISO/DIS 5119 Low temperature sealing capability of elastomeric seals — Test methods
  • ISO 27996:2009 Aerospace fluid systems - Elastomer seals - Storage and shelf life
  • ISO 7425-1:1988 Hydraulic fluid power; housings for elastomer-energized, plastic-faced seals; dimensions and tolerances; part 1: piston seal housings
  • ISO 7425-1:2021 Hydraulic fluid power cylinders - Dimensions and tolerances of housings for elastomer-energized, plastic-faced seals - Part 1: Piston seal housings
  • ISO 7425-2:1989 Hydraulic fluid power; housings for elastomer-energized, plastic-faced seals; dimensions and tolerances; part 2: rod seal housings
  • ISO 7425-2:2021 Hydraulic fluid power cylinders - Dimensions and tolerances of housings for elastomer-energized, plastic-faced seals - Part 2: Rod seal housings
  • ISO 6447:1983 Rubber seals; Joint rings used for gas supply pipes and fittings; Specification for material
  • ISO 23711:2022 Elastomeric seals — Requirements for materials for pipe joint seals used in water and drainage applications — Thermoplastic elastomers
  • ISO 1179-3:2007 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H)
  • ISO/DIS 27996:1990 Aerospace fluid systems — Elastomer seals — Storage and shelf life
  • ISO 10563:2005 Building construction - Sealants - Determination of change in mass and volume
  • ISO 1179-2:2007 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)
  • ISO 1179-2:2013 Connections for general use and fluid power.Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)
  • ISO 1179-4:2007 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-to-metal sealing (type B)

RU-GOST R, Gas tight and liquid tight

  • GOST ISO 16010-2013 Elastomeric seals. Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids
  • GOST 33785-2016 Sealing materials and gaskets from them. Method for determination of resistance to liquids
  • GOST 18829-2017 Rubber o-ring seals for hydraulic and pneumatic equipment. Specifications
  • GOST 24037-1990 Asbestos-polymer seal sheet materials. Method of test for resistance to liquids
  • GOST 21981-1976 Sealants. Determination method of bond strength with metal at peeling
  • GOST 9.068-1976 Unified system of corrosion and ageing protection. Sealants. Test methods for resistance to attack by liquid corrosive media
  • GOST 19823-1974 Filter air purification means for collective protection objects. Method for determination of air-tightness degree
  • GOST 21804-1994 Shut-off devices for cylinders with liquefied hydrocarbon gases for pressure to 1,6 MPa. General specifications

Defense Logistics Agency, Gas tight and liquid tight

  • DLA QPL-28827-QPD-2010 Switches, Thermostatic, (Volatile Liquid), Hermetically Sealed, General Specification for
  • DLA QPL-28827-2011 Switches, Thermostatic, (Volatile Liquid), Hermetically Sealed, General Specification for
  • DLA QPL-28827-8-2006 SWITCHES, THERMOSTATIC (VOLATILE LIQUID), HERMETICALLY SEALED, GENERAL SPECIFICATION FOR
  • DLA MIL-DTL-28827 C-2011 SWITCHES, THERMOSTATIC, (VOLATILE LIQUID), HERMETICALLY SEALED, GENERAL SPECIFICATION FOR
  • DLA MIL-DTL-28827 B-2004 SWITCHES THERMOSTATIC, (VOLATILE LIQUID), HERMETICALLY SEALED, GENERAL SPECIFICATION FOR
  • DLA MIL-DTL-28827/1 C-2011 SWITCH, THERMOSTATIC (VOLATILE LIQUID), HERMETIC SEALED, SINGLE POLE DOUBLE THROW (SPDT), MEDIUM RESPONSE TIME

Group Standards of the People's Republic of China, Gas tight and liquid tight

American Society for Testing and Materials (ASTM), Gas tight and liquid tight

  • ASTM F693-01(2018)e1 Standard Practice for Sealing Seams of Resilient Sheet Flooring Products by Use of Liquid Seam Sealers
  • ASTM C1299-03 Standard Guide for Use in Selection of Liquid-Applied Sealants
  • ASTM C1330-18 Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid-Applied Sealants
  • ASTM C12-08 Standard Practice for Installing Vitrified Clay Pipe Lines
  • ASTM C12-98e1 Standard Practice for Installing Vitrified Clay Pipe Lines
  • ASTM C1299-99 Standard Guide for Use in Selection of Liquid-Applied Sealants
  • ASTM C12-22a Standard Practice for Installing Vitrified Clay Pipe Lines
  • ASTM F693-01(2023) Standard Practice for Sealing Seams of Resilient Sheet Flooring Products by Use of Liquid Seam Sealers
  • ASTM C1330-23 Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid-Applied Sealants
  • ASTM D3832-79(2001) Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems
  • ASTM D3832-79(2022) Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems
  • ASTM D5973-97(2017) Standard Specification for Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing
  • ASTM C1589-04 Standard Practice for Outdoor Weathering of Construction Seals and Sealants
  • ASTM E1773-10 Standard Practice for Sealing Rigid Wall Tactical Shelters with Polysulfide Based Sealants
  • ASTM D3832-79(2006) Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems
  • ASTM D3832-79(2017) Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems
  • ASTM F693-95 Standard Practice for Sealing Seams of Resilient Sheet Flooring Products by Use of Liquid Seam Sealers
  • ASTM F693-01 Standard Practice for Sealing Seams of Resilient Sheet Flooring Products by Use of Liquid Seam Sealers
  • ASTM F693-01(2007) Standard Practice for Sealing Seams of Resilient Sheet Flooring Products by Use of Liquid Seam Sealers
  • ASTM F693-01(2012) Standard Practice for Sealing Seams of Resilient Sheet Flooring Products by Use of Liquid Seam Sealers
  • ASTM E1773-00 Standard Practice for Sealing Rigid Wall Tactical Shelters with Polysulfide Based Sealants
  • ASTM F1073-19 Standard Specification for Door Fittings, for Watertight /Gastight /Airtight, Weathertight, and Non-Tight Doors, for Marine Use
  • ASTM F913-02(2021) Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe
  • ASTM F913-95 Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe
  • ASTM D3832-79(1997)e1 Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems
  • ASTM D3832-79(2011) Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems
  • ASTM F2391-05(2016) Standard Test Method for Measuring Package and Seal Integrity Using Helium as the Tracer Gas
  • ASTM C1183-04(2008) Standard Test Method for Extrusion Rate of Elastomeric Sealants
  • ASTM F2391-22 Standard Test Method for Measuring Package and Seal Integrity Using Helium as the Tracer Gas
  • ASTM D5094-90(2003) Standard Test Methods for Gross Leakage of Liquids from Containers with Threaded or Lug-Style Closures

British Standards Institution (BSI), Gas tight and liquid tight

  • BS EN 464:1994 Protective clothing - Protection against liquid and gaseous chemicals, including liquid aerosols and solid particles - Test method - Determination of leak-tightness of gas-tight suits (Internal Pressure Test)
  • BS EN 943-1:2002 Protective clothing against liquid and gaseous chemicals, aerosols and solid particles. Performance requirements for ventilated and non-ventilated "gas-tight" (Type 1) and "non-gas-tight" (Type 2) chemical protective suits
  • BS EN 943-1:2015 Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols. Performance requirements for Type 1 (gas-tight) chemical protective suits
  • BS ISO 7425-1:2002 Hydraulic fluid power - Housing for elastomer-energized, plastic-faced seals - Dimensions and tolerances - Piston seal housings
  • BS ISO 7425-1:2021 Hydraulic fluid power cylinders. Dimensions and tolerances of housings for elastomer-energized, plastic-faced seals. Piston seal housings
  • BS ISO 7425-2:2002 Hydraulic fluid power - Housing for elastomer-energized, plastic-faced seals - Dimensions and tolerances - Rod seal housings
  • BS ISO 7425-2:2021 Hydraulic fluid power cylinders. Dimensions and tolerances of housings for elastomer-energized, plastic-faced seals. Rod seal housings
  • BS EN 682:2002 Elastomeric seals - Materials requirements for seals used in pipes and fi ttings carrying gas and hydrocarbon fluids
  • BS ISO 27996:2009 Aerospace fluid systems - Elastomer seals - Storage and shelf life
  • BS EN 60749-8:2003 Semiconductor devices. Mechanical and climatic test methods. Sealing
  • BS 5751:1987 Specification for dimensions of housings for hydraulic seals for reciprocating applications
  • BS EN 3631:2008 Aerospace series - Fluid fittings, flanged, 90° elbowed - Sealing by O-ring for 0,8 mm thick tubes
  • BS EN 3631:2009 Aerospace series. Fluid fittings, flanged, 90° elbowed. Sealing by O-ring for 0,8 mm thick tubes
  • BS EN 3631:2014 Aerospace series. Fluid fittings, flanged, 90 elbowed. Sealing by O-ring for 0,8 mm thick tubes
  • BS ISO 6194-3:2010 Rotary shaft lip-type seals incorporating elastomeric sealing elements. Storage, handling and installation
  • BS ISO 6194-3:2009 Rotary shaft lip-type seals incorporating elastomeric sealing elements - Storage, handling and installation
  • BS ISO 6194-1:2007 Rotary shaft lip-type seals incorporating elastomeric sealing elements - Nominal dimensions and tolerances
  • BS PD IEC/TS 60079-40:2015 Explosive atmospheres. Requirements for process sealing between flammable process fluids and electrical systems
  • 19/30393473 DC BS ISO 7425-2. Hydraulic fluid power. Housings for elastomer-energized, plastic-faced seals. Dimensions and tolerances. Part 2. Rod seal housings
  • 19/30393470 DC BS ISO 7425-1. Hydraulic fluid power. Housings for elastomer-energized, plastic-faced seals. Dimensions and tolerances. Part 1. Piston seal housings
  • BS ISO 6547:1981 Hydraulic fluid power. Cylinders. Piston seal housings incorporating bearing rings. Dimensions and tolerances
  • BS ISO 6194-4:2009 Rotary shaft lip-type seals incorporating elastomeric sealing elements - Performance test procedures
  • BS EN 681-2:2000 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Thermoplastic elastomers
  • BS EN ISO 1179-3:2009 Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing. Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H)
  • BS EN ISO 1179-3:2008 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H)
  • BS EN 291:1992 Rubber seals - Static seals in domestic appliances for combustible gas up to 200 mbar - Specification for material
  • 22/30451125 DC Aerospace fluid systems - Elastomer seals - Storage and shelf life
  • BS EN 13090:2000 Means for resealing threaded joints of gas pipework in buildings
  • BS EN 3630:2008 Aerospace series - Fluid fittings, flanged, straight - Sealing by O-ring for 0,8 mm thick tubes
  • BS EN ISO 1179-2:2009 Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing. Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)
  • BS EN ISO 1179-2:2008 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)
  • BS EN ISO 1179-2:2013 Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing. Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)
  • BS EN ISO 1179-4:2009 Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing. Stud ends for general use only with metal-to-metal sealing (type B)
  • BS EN ISO 1179-4:2008 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Stud ends for general use only with metal-to-metal sealing (type B)
  • BS ISO 23711:2022 Elastomeric seals. Requirements for materials for pipe joint seals used in water and drainage applications. Thermoplastic elastomers
  • BS EN ISO 10563:2005 Building construction - Sealants - Determination of change in mass and volume
  • PD IEC/TS 60079-40:2015 Explosive atmospheres. Requirements for process sealing between flammable process fluids and electrical systems
  • BS EN ISO 1179-1:2009 Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing. Threaded ports
  • BS EN ISO 1179-1:2008 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Threaded ports
  • BS EN 60512-14-2:2006 Connectors for electronic equipment - Tests and measurements - Sealing tests - Test 14b - Sealing - Fine air leakage

U.S. Military Regulations and Norms, Gas tight and liquid tight

GM North America, Gas tight and liquid tight

US-General Services, Gas tight and liquid tight

Society of Automotive Engineers (SAE), Gas tight and liquid tight

  • SAE ARP4727B-2013 Gland Design, Computation of Seal Squeeze and Gland Volume
  • SAE AS685C-1979 Piloted Ring Seal Fluid Connection Bosses
  • SAE AS685D-2012 Piloted Ring Seal Fluid Connection Bosses
  • SAE AMS2817G-2022 Packaging and Identification of Molded Elastomeric Seals and Sealing Components
  • SAE AIR4069B-2010 Sealing of Integral Fuel Tanks
  • SAE AIR4069A-1998 Sealing Integral Fuel Tanks
  • SAE AS1920-1985 Plug-Protective Dust and Fluid Seal, Flareless Fitting
  • SAE HS-1417-1983 Fluid Sealing Handbook- Radial Lip Seals May 1983
  • SAE AIR1244-1973 SELECTING SLIPPER SEALS FOR HYDRAULIC-PNEUMATIC FLUID POWER APPLICATIONS
  • SAE AIR4069D-2022 Sealing of Integral Fuel Tanks
  • SAE AIR4069C-2016 Sealing of Integral Fuel Tanks
  • SAE ARP5316B-2002 Storage of Elastomer Seals and Seal Assemblies Which Include an Elastomer Element Prior to Hardware Assembly
  • SAE ARP5316D-2014 Storage of Elastomer Seals and Seal Assemblies Which Include an Elastomer Element Prior to Hardware Assembly
  • SAE AS5316-2022 Storage of Elastomer Seals and Seal Assemblies Which Include an Elastomer Element Prior to Hardware Assembly
  • SAE ARP5316E-2018 Storage of Elastomer Seals and Seal Assemblies Which Include an Elastomer Element Prior to Hardware Assembly
  • SAE HS-1417-1996 SAE Fluid Sealing Handbook Radial Lip Seals 1996 Edition [Superseded: SAE HS J1417]
  • SAE J1002-2000 Seals—Evaluation of Elastohydrodynamic
  • SAE AS685A-1963 PILOTED RING SEAL FLUID CONNECTION BOSSES
  • SAE AS685C-2006 PILOTED RING SEAL FLUID CONNECTION BOSSES
  • SAE AS685B-1969 PILOTED RING SEAL FLUID CONNECTION BOSSES
  • SAE J1002-1987 SEALS - EVALUATION OF ELASTOHYDRODYNAMIC
  • SAE AIR1244A-1988 Selecting Slipper Seals for Hydraulic-Pneumatic Fluid Power Applications
  • SAE AS4510/2-2013 Fittings, Weld To Beam Seal, Fluid Connection
  • SAE AS6235B-2021 Face Seal Gland Design, Static, O-Ring and Other Seals for Aerospace Hydraulic and Pneumatic Applications
  • SAE J1836-1988 Overlap Shear Test for Sealant Adhesive Bonding of Automotive glass encapsulating Material to Body Opening
  • SAE AMS7279G-1995 Sealing, Fluorocarbon Rubber High Temperature Fluid Resistant 85-95
  • SAE AMS7255C-1996 Rings, Sealing, Tetrafluoroethylene/Propylene Rubber (FEPM) Hydraulic Fluid and Synthetic Oil Resistant 70 to 80
  • SAE AMS7256A-1996 Rings, Sealing, Tetrafluoroethylene/Propylene Rubber (FEPM) Hydraulic Fluid and Synthetic Oil Resistant 85 to 95
  • SAE AMS7255D-2014 Rings, Sealing, Tetrafluoroethylene/Propylene Rubber (Fepm) Hydraulic Fluid and Synthetic Oil Resistance 70 to 80
  • SAE AMS7256B-2014 Rings, Sealing, Tetrafluoroethylene/Propylene Rubber (Fepm) Hydraulic Fluid and Synthetic Oil Resistant 85 to 95
  • SAE AMS7261A-1989 RINGS, SEALING, PHOSPHONITRILIC (FZ) FLUOROELASTOMER High-Temperature-Fluid Resistant
  • SAE AMS7261B-1991 RINGS, SEALING, PHOSPHONITRILIC (FZ) FLUOROELASTOMER High-Temperature-Fluid Resistant
  • SAE AMS7279E-1974 RINGS, SEALING, FLUOROCARBON RUBBER High-Temperature-Fluid-Resistant 85 - 95
  • SAE AMS3266-1994 SEALING COMPOUND, POLYTHIOETHER ELASTOMERICTwo PartElectrically Conductive
  • SAE AMS-S-8802F-2022 Sealing Compound, Fuel-Resistant, Integral Fuel Tanks and Fuel Cell Cavities
  • SAE AS1920-2015 PLUG-PROTECTIVE DUST AND FLUID SEAL, FLARELESS FITTING
  • SAE AMS7261-1983 RINGS, SEALING, PHOSPHONITRILIC FLUOROELASTOMER High-Temperature-Fluid Resistant FZ Type
  • SAE AMS7278F-1995 Rings, Sealing, Fluorocarbon Rubber High Temperature-Fluid-Resistant, 70-80
  • SAE AIR4275B-2021 Jet Reference Fluid Study for Fuel Tank Sealants
  • SAE AMS7261C-1991 Rings, Sealing, Phosphonitrilic (FZ) Fluoroelastomer, High-Temperature-Fluid Resistant

European Committee for Standardization (CEN), Gas tight and liquid tight

  • EN 943-1:2002 Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles - Part 1: Performance requirements for ventilated and non-ventilated “gas-tight” (Type 1) and “non-gas-tight” (Type 2) chemical protective suits (Incor
  • prEN 946-1992 Protective clothing for use against liquid and gaseous chemicals, including liquid aerosols and solid particles; performance requirements for unventilated encapsulating protective clothing with gas tight connections (type 1A equipment)
  • EN 13090:2000 Means for resealing threaded joints of gas pipework in buildings
  • EN 13192:2001 Non destructive testing - Leak testing - Calibration of reference leaks for gases
  • EN ISO 1179-3:2008 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) (ISO 1179-3:2007)
  • EN 291:1992 Rubber Seals - Static Seals in Domestic Appliances for Combustible Gas up to 200 mbar - Specifications for Material
  • EN 12377:1998 Packaging - Flexible Tubes - Test Method for the Airtightness of Closures Ratified European Text
  • EN 50016:1978 Electrical apparatus for potentially explosive atmospheres; Pressurized apparatus "p"
  • EN 50016:1978/A1:1979 Electrical apparatus for potentially explosive atmospheres; pressurized apparatus p
  • EN 50028:1987 Electrical apparatus for potentially explosive atmospheres; encapsulation m
  • EN 682:2002 Elastomeric seals - Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids
  • EN ISO 1179-2:2013 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)
  • EN ISO 1179-2:2022 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2022)
  • EN ISO 1179-2:2008 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)
  • EN ISO 1179-4:2008 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-to-metal sealing (type B) (ISO 1179-4:2007)
  • EN ISO 10563:1997 Building Construction - Sealants for Joints - Determination of Change in Mass and Volume ISO 10563: 1991
  • EN ISO 10563:2017 Buildings and civil engineering works - Sealants - Determination of change in mass and volume
  • prEN 29302-1991 Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; electromagnetic testing for verification of hydraulic leak-tightness

ES-UNE, Gas tight and liquid tight

GM Europe, Gas tight and liquid tight

  • GME 01008-2009 Elastomeric Body Seals
  • GME 01004-2008 Door and Rear Compartment Seals Combined with Push-on Carrier (English/German; This standard may be applied only for current projects incl. Global Epsilon e (37##). It is Superceded for all future projects and replaced by GMW14147.)
  • GME QE 001207-1987 Elastomerdichtungen f黵 den Renkdeckelverschlu?des Tankes Elastomer Seals for Bayonet Fuel Caps German
  • GME L 000 0780-2013 Antiflutter/Sealing Compound, Body in White (English/German)
  • GME QE 001216-1995 Elastomer f黵 Abdichtung Rohr Kraftstoffeinf黮ung Elastomer for Sealing-Pipe Fuel Filling English/German

Underwriters Laboratories (UL), Gas tight and liquid tight

  • UL 1660-2001 Liquid-tight flexible nonmetallic conduit
  • UL SUBJECT 1854-1996 Outline of Investigation for Excavation Liners for Secondary Containment of Flammable and Combustible Liquids (Issue Number 1)
  • UL SUBJECT 1854-2001 Outline of Investigation for Excavation Liners for Secondary Containment of Flammable and Combustible Liquids (Issue 2)

HU-MSZT, Gas tight and liquid tight

General Motors Corporation (GM), Gas tight and liquid tight

SAE - SAE International, Gas tight and liquid tight

  • SAE AIR4069-1990 Sealing Integral Fuel Tanks
  • SAE ARP5316A-2002 Storage of Elastomer Seals and Seal Assemblies Which Include an Elastomer Element Prior to Hardware Assembly
  • SAE J1002-1994 SEALS - EVALUATION OF ELASTOHYDRODYNAMIC
  • SAE J1002-1985 Seals - Evaluation of Elastohydrodynamic
  • SAE J1002-2002 Seals - Evaluation of Elastohydrodynamic
  • SAE AS4510/2-1996 Fittings@ Weld to Beam Seal@ Fluid Connection
  • SAE AS4510/2A-2019 Fittings@ Weld to Beam Seal@ Fluid Connection
  • SAE AS6235-2014 Face Seal Gland Design@ Static@ O-ring and Other Seals for Aerospace Hydraulic and Pneumatic Applications
  • SAE AS6235A-2015 Face Seal Gland Design, Static, O-Ring and Other Seals for Aerospace Hydraulic and Pneumatic Applications
  • SAE J1836-2021 Overlap Shear Test for Sealant Adhesive Bonding of Automotive Glass Encapsulating Material to Body Opening@ Recommended Practice
  • SAE ARP4727A-2004 Gland Design@ Computation of Seal Squeeze and Gland Volume
  • SAE ARP4727-1995 Gland Design@ Computation of Seal Squeeze and Gland Volume
  • SAE ARP5316-1998 Storage of Aerospace Elastomeric Seals and Seal Assemblies Which Include an Elastomer Element Prior to Hardware Assembly
  • SAE AMS7279F-1980 RINGS@ SEALING@ FLUOROCARBON RUBBER HIGH-TEMPERATURE-FLUID-RESISTANT 85 - 95
  • SAE AMS7279F-1983 RINGS@ SEALING@ FLUOROCARBON RUBBER HIGH TEMPERATURE FLUID RESISTANT 85 - 95
  • SAE AMS7279G-1991 RINGS@ SEALING@ FLUOROCARBON RUBBER HIGH-TEMPERATURE-FLUID-RESISTANT 85 - 95
  • SAE AMS7278E-1982 RINGS@ SEALING@ FLUOROCARBON RUBBER High-Temperature-Fluid-Resistant 70-80
  • SAE AMS7278E-1974 RINGS@ SEALING@ FLUOROCARBON RUBBER High-Temperature-Fluid-Resistant 70-80
  • SAE AIR4275A-2012 Jet Reference Fluid Study for Fuel Tank Sealants
  • SAE AMS7278F-1991 RINGS@ SEALING@ FLUOROCARBON RUBBER HIGH - TEMPERATURE-FLUID-RESISTANT 70 - 80
  • SAE ARP618A-1988 Boss Fittings@ Metal Seal@ Fluid Systems: General Requirements For
  • SAE ARP618A-1985 Boss Fittings@ Metal Seal@ Fluid Systems: General Requirements for
  • SAE AMS7261C-1995 Rings@ Sealing@ Phosphonitrilic (FZ) Fluoroelastomer High- Temperature-Fluid Resistant

ESDU - Engineering Sciences Data Unit, Gas tight and liquid tight

  • ESDU 80012 A-2002 Dynamic sealing of fluids. I: guide to selection of rotary seals.
  • ESDU 80012-1980 DYNAMIC SEALING OF FLUIDS. 1: GUIDE TO SELECTION OF ROTARY SEALS
  • ESDU 83031-1983 Dynamic sealing of fluids. II: guide to selection of reciprocating seals.

RO-ASRO, Gas tight and liquid tight

  • STAS 6984-1985 Seals for machine building SEALING DEVICES FOR HYDRAULIC AND PNEUMATIC FLUID POWER Classification and vocabulary

PL-PKN, Gas tight and liquid tight

  • PN BN 6112-11-1965
  • PN M73091-1962 Hydraullc drive and control equipment. Dtmensions of housings for hydraullcseals
  • PN E93602-1969 Metallic segting glands for conduc?ors in elektrical installa?ions on ships Housings
  • PN M73093-1964 Hydraulic drive and control equipment. Ring seals type ?O" for static seal Dimensions
  • PN M73216-1986 Hydraulic fluid power Cylinders — Piston seal housings incorporating bearing rings Dimensions
  • PN E93601-1969 Melallic sealing glands for conductors in eleclrical inslalla?ions on ships
  • PN E93607-1969 Me?allic sealing glands for conduc?ors in electrical installalions on ships packings
  • PN E93610-1969 Melallic sealing glandjs for conduclors in elec?rical installations on ships Seals
  • PN E93608-1969 Me?allic sealing glands for conductors in eleclrical installations on ships Plugs

GM Global, Gas tight and liquid tight

  • GMW 14169-2012 Requirements for Dense Elastomeric Body Seals Issue 4; English
  • GMW 14147-2012 Requirements for Expanded Elastomeric Body Seals Issue 4; English
  • GMW 16800-2012 Requirements for Liquid Anaerobic Compounds Used for Thread Locking, Retaining and Sealing Issue 1; English

Professional Standard - Aviation, Gas tight and liquid tight

  • HB 5272-1993 Test method for liquid resistance of room temperature vulcanizing sealants
  • HB 5313-1993 Test method for liquid tightness of anaerobic adhesives used in aviation

Professional Standard - Chemical Industry, Gas tight and liquid tight

  • HG/T 2099～2100-2020 Test specifications for mechanical seals for kettles and mechanical seals for liquid ring chlorine gas pumps (2020)
  • HG/T 4113～4114-2020 Test method for gas leakage of mechanical seals for kettles and technical conditions for mechanical seals for pulp pumps (2020)
  • HG/T 4113-2009 Gas leakage rate measurement method of mechanical seals for a kettle
  • HG/T 2100-2003 Liquid piston chlorine compressor mechanical seals
  • HG/T 5454～5455-2018 Rubber seals for lights and rubber gaskets for engine cylinder head covers (2018)
  • HG/T 5837～5839-2021 Rubber sealing valves for engine electronic thermostats, metal skeleton foam rubber composite sealing plates and sealing rings for gas springs (2021)

Danish Standards Foundation, Gas tight and liquid tight

  • DS/EN 682/A1:2005 Elastomeric seals - Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids
  • DS/EN 682:2003 Elastomeric Seals - Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids
  • DS/ISO 7425-1:2021 Hydraulic fluid power cylinders – Dimensions and tolerances of housings for elastomer-energized, plastic-faced seals – Part 1: Piston seal housings
  • DS/INSTA 177:1990 Building sealants. Seepage. Loss of liquids to porous substrates
  • DS/EN 60749-8+Corr.2:2004 Semiconductor devices - Mechanical and climatic test methods - Part 8: Sealing
  • DS/ISO 3601-3:1989 Fluid systems. Sealing devices. O-rings. Part 3: Quality acceptance criteria
  • DS/INSTA 178:1990 Building sealants. Volume shrinkage and weight loss after ageing
  • DS/EN ISO 10563:2007 Building construction - Sealants - Determination of change in mass and volume
  • DS/ISO 7425-1:1992 Hydraulic fluid power.Housings for elastomer.energized plastic-faced seals.Dimensions and tolerances.Part 1; Piston seal housings
  • DS/EN ISO 1179-2:2008 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)

Lithuanian Standards Office , Gas tight and liquid tight

  • LST EN 682-2003 Elastomeric Seals - Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids
  • LST EN 682-2003/A1-2005 Elastomeric seals - Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids

AENOR, Gas tight and liquid tight

  • UNE-EN 682:2002 Elastomeric Seals - Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids.
  • UNE-EN 682:2002/A1:2006 Elastomeric seals - Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids
  • UNE-EN 60749-8:2004 Semiconductor devices - Mechanical and climatic test methods -- Part 8: Sealing
  • UNE-ENV 1992-4:2000 EUROCODE 2: DESIGN OF CONCRETE STRUCTURES. PART 4: LIQUID RETAINING AND CONTAINMENT STRUCTURES

未注明发布机构, Gas tight and liquid tight

  • BS EN 682:2002(2006) Elastomeric seals — Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids
  • ASME MFC-2M-1983 Uncertainty in liquid flow measurements in sealed pipes
  • BS EN 291:1992(1999) Rubber seals — Static seals in domestic appliances for combustible gas up to 200 mbar — Specification for material
  • DIN EN 14241-1:2005 Exhaust systems – Material requirements and tests for elastomeric seals and sealing materials – Part 1: Seals for use in inner pipes

Professional Standard - Machinery, Gas tight and liquid tight

United States Navy, Gas tight and liquid tight

ZA-SANS, Gas tight and liquid tight

  • SANS 23711:2008 Elastomeric seals - Requirements for materials for pipe joint seals used in water and drainage applications - Thermoplastic elastomers

工业和信息化部, Gas tight and liquid tight

  • HG/T 4113-2020 Gas leakage test method for mechanical seals used in kettles
  • HG/T 2100-2020 Mechanical seal for liquid ring chlorine pump
  • HG/T 6050-2022 Anti-gas rapid decompression rubber seal for pipeline valves

AT-ON, Gas tight and liquid tight

  • ONORM EN 29090-1992 Gas tightness of equipment for gas welding and allied processes
  • ONORM ISO 6547:1983 Hydraulic fluid power; Cy linders; Piston sealhousings incorporating bearing rings; Dimensions and tolerances

FI-SFS, Gas tight and liquid tight

American Society of Mechanical Engineers (ASME), Gas tight and liquid tight

  • ASME MFC-1M-1991 Glossary of terms used in measurement of fluid flow in pipes
  • ASME MFC-16-2014 Measurement of Liquid Flow in Closed Conduits with Electromagnetic Flowmeters
  • ASME MFC-16M-1995 Measurement of fluid flow in closed conduits by means of electromagnetic flowmeters

American National Standards Institute （ANSI), Gas tight and liquid tight

  • ANSI/ASME MFC-2M-1983 Measurement Uncertainty for Fluid Flow in Closed Conduits
  • ANSI/ISA 12.27.01-2011 Requirements for Process Sealing Between Electrical Systems and Flammable or Combustible Process Fluids
  • ANSI/ASTM F1073:1987 Specification for Door Fittings, for Watertight/Gastight/Airtight, Weathertight, and Non-Tight Doors, for Marine Use
  • ANSI/ASME MFC-5M-1985 Measurement of Liquid Flow in Closed Conduits using Transit-Time Ultrasonic Flowmeters

(U.S.) Ford Automotive Standards, Gas tight and liquid tight

KR-KS, Gas tight and liquid tight

  • KS M ISO 16010-2022 Elastomeric seals Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids
  • KS M ISO 9727-6-2020 Cylindrical cork stoppers — Physical tests —Part 6: Determination of liquid tightness

SE-SIS, Gas tight and liquid tight

  • SIS SS 16 28 10-1980 Rubber — Materials for extruded, solid sealing strips
  • SIS SS-ISO 6547:1985 Hydraulic fluid power - Cylinders - Piston seal housings incorporating bearing rings - Dimensions and toler- ances
  • SIS SS-IEC 509:1991 Accumulators - Sealed nickel-cadmium button rechargeable single cells

Professional Standard - Nuclear Industry, Gas tight and liquid tight

  • EJ/T 1175.5-2008 Components for containment enclosures.Part 5: Penetrations for electrical and fluid circuits of unsheilded containment enclosures

NL-NEN, Gas tight and liquid tight

  • NEN-EN 291-1993 Rubber seals. Static seals in domestic appliances for combustible gas up to 200 mbar. Specification for material

Military Standard of the People's Republic of China-General Armament Department, Gas tight and liquid tight

  • GJB 1520-1992 General specification for non-hermetic solid electrolytic tantalum capacitors
  • GJB 132.1-1986 Shear-resistant sealed high-lock nut nut body
  • GJB 3581-1999 Specification for rapid repair sealants for aircraft integral fuel tanks
  • GJB 1515/2-2011 Detail specification for model JGC-1MC hermetically sealed DC solid state relay
  • GJB 1515/3-2011 Detail specification for model JGC-2MB hermetically sealed d.c. solid state relays
  • GJB 1515/1-2011 Detail specification for model JGX-6MA hermetically sealed d.c.solid state relays

IN-BIS, Gas tight and liquid tight

Professional Standard - Petroleum, Gas tight and liquid tight

  • SY/T 7683-2023 Technical specifications for pressure sealing of liquefied natural gas

Professional Standard - Electron, Gas tight and liquid tight

  • SJ/T 10539-1994 Sectional specification for bonded permanent ferrite magnets for seal
  • SJ/T 10286-1997 Sealed nickel-cadmium button rechargeable single cells
  • SJ 20322-1993 Capacitors,fixed,electrolytic(solid electrolyte),Tantalum,polar,nonhermetically sealed,style CA440,Detail specification for
  • SJ/T 10621-1995 Sealed nickel-cadmium prismatic rechargeable single cells
  • SJ/T 9560.19-1993 Sealed solid micro-relay--Quality grading standard
  • SJ/T 9560.21-1993 Sealed miniature solid relay--Quality grading standard
  • SJ 20486-1995 Nickel-cadmium alkaline rechargeable cells,hermetically sealed,general specification for
  • SJ/T 9560.17-1993 Sealed hybrid and solid time delay relay--Quality grading standard
  • SJ/T 9560.20-1993 Sealed sub-miniature solid relay--Quality grading standard
  • SJ/T 9560.23-1993 Unsealed miniature solid relay--Quality grading standard
  • SJ 51515.1-1995 Relays,d.c.solid state,hermetically sealed,model JGX-6M,detail specification for
  • SJ 51515/3-1996 Model JGC-0304M,relays,d.c.solid state,hermetically scaled,detail specification for
  • SJ 51515/2-1996 Model JGC-2M,relays,d.c.solid state,hermetically sealed,detail specification for

Professional Standard-Ships, Gas tight and liquid tight

  • CB 537-1999 Flangs for pressure hull.Connection dimensions and mating face

BR-ABNT, Gas tight and liquid tight

AIA/NAS - Aerospace Industries Association of America Inc., Gas tight and liquid tight

Anhui Provincial Standard of the People's Republic of China, Gas tight and liquid tight

CENELEC - European Committee for Electrotechnical Standardization, Gas tight and liquid tight

  • EN 50016:1977 Electrical Apparatus for Potentially Explosive Atmospheres: Pressurized Apparatus 'P'
  • EN 50016:1995 Electrical Apparatus for Potentially Explosive Atmospheres Pressurized Apparatus ?p?
  • EN 50016:2002 "Electrical Apparatus for Potentially Explosive Atmospheres - Pressurized Apparatus ""p"""

International Electrotechnical Commission (IEC), Gas tight and liquid tight

  • IEC TS 62332-3:2016 Electrical insulation systems (EIS) - Thermal evaluation of combined liquid and solid components - Part 3: Hermetic motor-compressors
  • IEC 60749-8:2002/COR1:2003 Semiconductor devices - Mechanical and climatic test methods - Part 8: Sealing
  • IEC 60749-8:2002 Semiconductor devices - Mechanical and climatic test methods - Part 8: Sealing
  • IEC 31/1034/CD:2012 IEC/TS 60079-40, Ed. 1: Explosive atmospheres - Requirements for Process Sealing Between Flammable or Combustible Process Fluids and Electrical Systems
  • IEC TS 60079-40:2015 Explosive atmospheres - Part 40: Requirements for process sealing between flammable or combustible process fluids and electrical systems

国家市场监督管理总局、中国国家标准化管理委员会, Gas tight and liquid tight

  • GB/T 22578.3-2020 Electrical insulation system (EIS)—Thermal evaluation of combined liquid and solid components—Part 3:Hermetic motor-compressors
  • GB/T 11023-2018 Test method of SF6 gas tightness for high—voltage switchgear
  • GB/T 36520.4-2019 Hydraulic fluid power—Dimensions and tolerances of polyurethane seals—Part 4：Dimensions and tolerances of seals for cylinder port

BE-NBN, Gas tight and liquid tight

Professional Standard - Post and Telecommunication, Gas tight and liquid tight

European Committee for Electrotechnical Standardization（CENELEC）, Gas tight and liquid tight

  • HD 201 S2-1991 Sealed Nickel-Cadmium Cylindrical Rechargeable Single Cells

ICEA - Insulated Cable Engineers Association Inc., Gas tight and liquid tight

  • T-31-610-1994 A LONGITUDINAL WATER PENETRATION RESISTANCE TEST FOR SEALED CONDUCTOR

IPC - Association Connecting Electronics Industries, Gas tight and liquid tight

ANS - American Nuclear Society, Gas tight and liquid tight

  • 56.2-1984 Containment Isolation Provisions for Fluid Systems After a LOCA
  • 56.2-1977 CONTAINMENT ISOLATION PROVISIONS FOR FLUID SYSTEMS (ANSI N271-1976)

YU-JUS, Gas tight and liquid tight

  • JUS N.A5.772-1985 Basic environmental testing procedures. Test Qc: Container sealing gas leakage
  • JUS N.A5.773-1985 Basic environmental testingprocedures. Test Qd: Container sealing, seepage of filling liquid
  • JUS N.A5.864-1985 Basic environmental testing procedures. Test Qk: Sealing, tracer gas method with mass spectrometer

European Association of Aerospace Industries, Gas tight and liquid tight

U.S. Air Force, Gas tight and liquid tight

Instrument Society of America (ISA), Gas tight and liquid tight

  • ISA 12.27.01-2011 Requirements for Process Sealing Between Electrical Systems and Flammable or Combustible Process Fluids

Natural Gas Processor's Association (NGPA), Gas tight and liquid tight

GB-REG, Gas tight and liquid tight

Aerospace Industries Association, Gas tight and liquid tight

Insulated Cable Engineers Association （ICEA), Gas tight and liquid tight

  • ICEA T-31-610-1994 Conducting a Longitudinal Water Penetration Resistance Test for Sealed Conductor

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Gas tight and liquid tight

  • GB/T 29334-2012 Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid

General Motors do Brasil, Gas tight and liquid tight

  • GMSA LTP.AI.010-2011 Procedure for determining hydrochloric gas content of PVC-based sealing compounds Determina莽茫o do teor de g谩s cloridrico em massas vedadoras 脿 base de PVC Do Not use on New Programs; No Replacement

GOSTR, Gas tight and liquid tight

  • GOST 34419-2018 Sealing metal means for packaging with food liquids under overpressure. General specifications

Aerospace Industries Association/ANSI Aerospace Standards, Gas tight and liquid tight

  Gas tight and liquid tight, Gas-tight and liquid-tight requirements.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved