ZH
RU
ES

UV Spectroscopy Electron Spectroscopy

UV Spectroscopy Electron Spectroscopy, Total:500 items.

In the international standard classification, UV Spectroscopy Electron Spectroscopy involves: Analytical chemistry, Products of the chemical industry, Electrical and electronic testing, Optics and optical measurements, Jewellery, Education, Paper products, Physics. Chemistry, Optoelectronics. Laser equipment, Protection against fire, Petroleum products in general, Fuels, Optical equipment, Non-destructive testing, Natural gas, Plastics, Electronic components in general, Air quality, Edible oils and fats. Oilseeds, Ferrous metals, Testing of metals, ENVIRONMENT. HEALTH PROTECTION. SAFETY, Non-ferrous metals, Electrical wires and cables, Products of non-ferrous metals, Products of the textile industry, Environmental protection, Electrical engineering in general, Protection against crime, Ferroalloys, Iron and steel products, Road vehicle systems, General methods of tests and analysis for food products, Inorganic chemicals, Thermodynamics and temperature measurements, Radiation measurements, Linear and angular measurements, Lubricants, industrial oils and related products, Electricity. Magnetism. Electrical and magnetic measurements, Refractories, Test conditions and procedures in general, Milk and milk products, Metalliferous minerals, Organic chemicals, Water quality, Powder metallurgy, Soil quality. Pedology, Wind turbine systems and other alternative sources of energy, Food products in general, Animal feeding stuffs, Non-metalliferous minerals, Tea. Coffee. Cocoa, Semiconductor devices, Coals, Ceramics, Meat, meat products and other animal produce, Beverages, Medical equipment, Surface treatment and coating, Corrosion of metals, Farming and forestry.

国家市场监督管理总局、中国国家标准化管理委员会, UV Spectroscopy Electron Spectroscopy

• GB/T 41072-2021 Surface chemical analysis—Electron spectroscopies—Guidelines for ultraviolet photoelectron spectroscopy analysis
• GB/T 24370-2021 Nanotechnologies—Characterization of cadmium chalcogenide colloidal quantum dot—UV-Vis absorption spectroscopy
• GB/T 37396.1-2019 Lasers and laser-related equipment—Standard optical components—Part 1: Components for the UV,visible and near-infrared spectral ranges
• GB/T 39114-2020 Nanotechnologies—Characterization of single-wall carbon nanotubes using ultraviolet-visible-near infrared (UV-Vis-NIR) absorption spectroscopy
• GB/T 41073-2021 Surface chemical analysis—Electron spectroscopies—Minimum reporting requirements for peak fitting in X-ray photoelectron spectroscopy
• GB/T 37186-2018 Gas analysis—Determination of sulfur dioxide and nitrogen oxides—Ultraviolet differential optical absorption spectroscopy
• GB/T 37131-2018 Nanotechnologies—Test method of semiconductor nanopowder using UV-Vis diffuse reflectance spectroscopy
• GB/T 40374-2021 Hardmetals—Determination of lead and cadmium content—Flame atomic absorption spectrometric method and inductively coupled plasma atomic emission spectrometry

International Commission on Illumination (CIE), UV Spectroscopy Electron Spectroscopy

• CIE 151-2003 SPECTRAL WEIGHTING OF SOLAR ULTRAVIOLET RADIATION

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, UV Spectroscopy Electron Spectroscopy

• GB/T 25481-2010 On-line ultraviolet/visible spectrum analyzer
• GB/T 42645-2023 Jewelry and Jade Identification by Ultraviolet-visible Absorption Spectroscopy
• GB/T 24370-2009 Characterization of CdSe quantum dot nanocrystals.UV-Vis absorption spectroscopy
• GB/T 18294.1-2001 Technical identification method for fire Part 1:Ultraviolet spectrum analysis
• GB/T 18294.1-2013 Technical identification methods for fire.Part 1:Ultraviolet spectrometry
• GB/T 32888-2016 Screening Infrared Spectrometry of Organotins in Electronic and Electrical Products
• GB/T 24369.1-2009 Characterization of gold nanorods.Part 1:UV-Vis-NIR absorption spectroscopy
• GB/T 29783-2013 Determination of chromium (VI) in electrical and electronic products.Atomic fluorescence spectrometry
• GB/T 36244-2018 Inductively coupled plasma atomic emission spectrometer
• GB/T 25184-2010 Verification method for X-ray photoelectron spectrometers
• GB/T 19500-2004 General rules for X-ray photoelectron spectroscopic analysis method
• GB/T 19267.2-2008 Physical and chemical examination of trace evidence in forensic sciences.Part 2:Ultraviolet-visible absorption spectroscopy
• GB/T 19267.2-2003 Physical and chemical examination of trace evidence in forensic sciences--Part 2: Ultraviolet-visible absorption spectroscopy
• GB/T 14203-2016 General rules for spark discharge atomic emission spectrometry
• GB/T 28632-2012 Surface chemical analysis.Auger electron spectroscopy and X-ray photoelectron spectroscopy.Determination of lateral resolution
• GB/T 4324.15-2008 Methods for chemical analysis of tungsten.Determination of magnesium content.The flame atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry
• GB/T 21006-2007 Surface chemical analysis.X-ray photoelectron and Auger electron spectrometers.Linearity of intensity scale
• GB/T 7731.14-2008 Ferrotungsten. Determination of lead content. The polarographic method and inductively coupled plasma-atomic emission spectrometry
• GB/T 4324.9-2012 Methods for chemical analysis of tungsten.Part 9:Determination of cadmium content.Inductively-coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry
• GB/T 32179-2015 Chemical analysis of refractories.General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry(ICP-AES) methods
• GB/T 7731.7-2008 Ferrotungsten. Determination of tin content. Phenylfluorone photometric method and inductively coupled plasma-atomic emission spectrometry
• GB/T 30704-2014 Surface chemical analysis.X-ray photoelectron spectroscopy.Guidelines for analysis
• GB/T 23942-2009 Chemical reagent.General rules for inductively coupled plasma atomic emission spectrometry
• GB/T 31470-2015 Standard practice for determination of the specimen area contributing to the detected signal in Auger electron spectrometers and some X-ray photoelectron spectrometers
• GB/T 7731.6-2008 Ferrotungsten.Determination of arsenic content.The molybdenum blue photometrie method and inductively coupled plasma-atomic emission spectrometry
• GB/T 4324.8-2008 Methods for chemical analysis of tungsten.Determination of nickel content.The inductively coupled plasma atomic emission spectrometry、flame atomic absorption spectrometry and dimethylglyoxime gravimetry
• GB/T 23545-2009 Determination of manganese in white wine.Inductively coupled plasma atomic emission spectrometry
• GB/T 31472-2015 Standard guide to charge control and charge referencing techniques in X-ray photoelectron spectroscopy
• GB/T 22368-2008 Low-alloy steel.Determination of multi-element contents.Glow discharge optical emission spectrometry(Routine method)
• GB/T 7731.9-2008 Ferrotungsten.Determination of bismuth content.The bismuth iodide photonmetric method and inductively coupled plasma-atomic emission spectrometry
• GB/T 1871.5-2022 Determination of magnesium oxide content for phosphate rock and concentrate—Flame atomic absorption spectrometry，volumetry and inductively coupled plasma optical emission spectrometry
• GB/T 23199-2008 Determination of rare earth elments in tea.Inductive coupled plasma atomic emission spectrometer and inductive coupled plasma mass spectrometer
• GB/T 13747.9-2022 Methods for chemical analysis of zirconium and zirconium alloys—Part 9：Determination of magnesium content—Flame atomic absorption spectrometry and inductively coupled plasma atomic emission spectromet
• GB/T 10725-1989 Chemical reagent--General rules for industively coupled plasma atomic emission spectrometry
• GB/T 8220.6-1998 Methods for chemical analysis of bismuth--Determination of lead content--Electrothermal atomic absorption spectrometric method
• GB/T 8220.12-1998 Methods for chemical analysis of bismuth--Determination of nickel content--Electrothermal atomic absorption spectrometric method
• GB/T 7731.8-2008 Ferrotungsten.Determination of antimony content.The tetraethlrhodamine photometrie method and inductively couple plasma-atomic mission spectrometry
• GB/Z 21277-2007 Rapid screening of lead,mercury,chromium,cadmium and bromine of regulated substances in electrical and electronic equipment.X-ray fluorescence spectrometry
• GB/T 29559-2013 Surface chemical analysis.Analysis of zinc and/or aluminium based metallic coatings by glow discharge optical emission spectrometry
• GB/T 8220.13-1998 Methods for chemical analysis of bismuth--Determination of silver and cadmium content--Electrothermal atomic absorption spectrometric method
• GB/T 8647.2-2006 The methods for chemical analysis of nickel. Determination of aluminium content. Electrothermal atomic absorption spectrometric method
• GB/Z 32490-2016 Procedure for determination of background by X-ray photoelectron spectroscopy for surface chemical analysis
• GB/T 6730.84-2023 Determination of Total Rare Earth in Iron Ore by Inductively Coupled Plasma-Atomic Emission Spectrometry

AENOR, UV Spectroscopy Electron Spectroscopy

• UNE-ISO 4735:2009 Oils of Citrus. Determination of CD value by ultraviolet espectrometric analysis
• UNE 77401:1992 ECOTOXICOLOGY. DETERMINATION OF UV-VIS ABSORPTION SPECTRA.
• UNE-EN 15605:2011 Copper and copper alloys - Inductively coupled plasma optical emission spectrometry
• UNE 38863:2012 Titanium and titanium alloys. Determination of iron. Inductively coupled plasma atomic emission spectrometry.

Korean Agency for Technology and Standards (KATS), UV Spectroscopy Electron Spectroscopy

• KS H ISO 4735-2014(2019) Oils of Citrus－Determination of CD value by ultraviolet spectrometric analysis
• KS B ISO 11151-1-2015(2020) Lasers and laser-related equipment ― Standard optical components ― Part 1: Components for the UV, visible and near-infrared spectral ranges
• KS M 9102-1996 Water quality-Determination of total mercury by flameless atomic absorption spectrometry(Method after pretreatment with ultraviolet radiation)
• KS B ISO 11151-1:2013 Lasers and laser-related equipment ?; Standard optical components ?; Part 1: Components for the UV, visible and near-infrared spectral ranges
• KS B ISO 11151-1:2003 Lasers and laser-related equipment-Standard optical components-Part 1:Components for the UV, visible and near-infrared spectral ranges
• KS B ISO 11151-1:2015 Lasers and laser-related equipment ― Standard optical components ― Part 1: Components for the UV, visible and near-infrared spectral ranges
• KS D 2518-2005 Methods for photoelectric emission spectrochemical analysis of cadmium metal
• KS D 2518-1982 Methods for photoelectric emission spectrochemical analysis of cadmium metal
• KS M 9102-1996(2001) WATER QUALITY-DETERMINATION OF TOTAL MERCURY BY FLAMELESS ATOMIC ABSORPTION SPECTROMETRY(METHOD AFTER PRETREATMENT WITH ULTRAVIOLET RADITION)
• KS D 1852-2005 Methods for photoelectric emission spectrochemical analysis of aluminium and aluminium alloys
• KS D 2717-2008(2018) Evaluation of metallic/semiconducting ratio of single-walled carbon nanotube soots using UV-VIS－NIR absorption spectroscopy
• KS D 1673-2007 Methods for inductively coupled plasma emission spectrochemical analysis of steel
• KS D ISO 21270:2005 Surface chemical analysis－X-ray photoelectron and Auger electron spectrometers－Linearity of intensity scale
• KS D ISO 18118:2005 Surface chemical analysis－Auger electron spectroscopy and X-ray photoelectron spectroscopy－Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
• KS D 1652-2007 Iron and steel-Method for spark discharge atomic emission spectrometric analysis
• KS D ISO 11437:2022 Nickel alloys — Determination of lead — Electrothermal atomic absorption spectrometric method
• KS D 1652-2022 Iron and steel — Method for spark discharge atomic emission spectrometric analysis
• KS D 1652-2007(2017) Iron and steel－Method for spark discharge atomic emission spectrometric analysis
• KS D ISO 21270-2005(2020) Surface chemical analysis－X-ray photoelectron and Auger electron spectrometers－Linearity of intensity scale
• KS L ISO 26845-2012(2022) Chemical analysis of refractories－General requirements for wet chemical analysis, atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry methods
• KS L ISO 26845-2012(2017) Chemical analysis of refractories－General requirements for wet chemical analysis, atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry methods
• KS H ISO 9233:2006 Cheese and cheese rind－Determination of natamycin content－Method by molecular absorption spectrometry and by high-performance liquid chromatography
• KS D ISO 10698:2002 Steel－Determination of antimony content－Electrothermal atomic absorption spectrometric method
• KS I ISO 20279:2006 Soil quality-Extraction of thallium and determination by electrothermal atomic absorption spectrometry
• KS M 1076-2008(2018) Ink in electrotechnical products－Determination of lead and cadmium－Atomic spectrometry
• KS D ISO 22033:2006 Nickel alloys－Determination of niobium－Inductively coupled plasma atomic emission spectrometric method
• KS D ISO 10278-2003(2018) Steel－Determination of manganese content－Inductively coupled plasma atomic emission spectrometric method
• KS B ISO TR 17055-2008(2018) Steel－Determination of silicon content－Inductively coupled plasma atomic emission spectrometric method
• KS L 1627-2014(2019) Testing method of impurities in high purity cobalt ingot by inductively coupled plasma spectrometric
• KS I ISO 20279-2006(2011) Soil quality－Extraction of thallium and determination by electrothermal atomic absorption spectrometry
• KS D 1673-2007(2022) Methods for inductively coupled plasma emission spectrochemical analysis of steel
• KS L ISO 20565-3-2012(2017) Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials(alternative to the X-ray fluorescence method)－Part 3：Flame atomic absorption spectrometry(FAAS) and inductively
• KS L ISO 20565-3-2012(2022) Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials(alternative to the X-ray fluorescence method)－Part 3：Flame atomic absorption spectrometry(FAAS) and inductively
• KS D ISO 10278:2003 Steel-Determination of manganese content-Inductively coupled plasma atomic emission spectrometric method
• KS D ISO 11435:2006 Nickel alloys－Determination of molybdenum－Inductively coupled plasma atomic emission spectrometric method
• KS D ISO TS 18223:2018 Nickel alloys — Determination of Nickel content — Inductively coupled plasma atomic emission spectrometric method
• KS D ISO 22033:2021 Nickel alloys — Determination of niobium — Inductively coupled plasma/atomic emission spectrometric method
• KS M 1081-2008(2018) Ceramic fuse in electrotechnical products－Determination of lead and cadmium－Atomic spectrometry
• KS D 1674-2019 Methods for inductively coupled plasma spectrometric analysis of trace elements in gold
• KS M 1080-2008(2018) Determination of lead and cadmium in foam for impact absorption
• KS E ISO 11535-2011(2016) Iron ores－Determination of various elements－Inductively coupled plasma atomic emission spectrometric method
• KS D ISO 22962-2010(2020) Titanium and titanium alloys－Determination of iron－Inductively coupled plasma atomic emission spectrometry

American Society for Testing and Materials (ASTM), UV Spectroscopy Electron Spectroscopy

• ASTM E2193-16 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (using Ultraviolet Spectrophotometry)
• ASTM E958-13(2021) Standard Practice for Estimation of the Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers
• ASTM E958-93(2005) Standard Practice for Measuring Practical Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers
• ASTM E958-13 Standard Practice for Estimation of the Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers
• ASTM E958-93(1999) Standard Practice for Measuring Practical Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers
• ASTM E2193-04 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
• ASTM E2193-02a Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
• ASTM E2193-02 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
• ASTM E2193-08 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
• ASTM E995-16 Standard Guide for Background Subtraction Techniques in Auger Electron Spectroscopy and X-Ray Photoelectron Spectroscopy
• ASTM E996-04 Standard Practice for Reporting Data in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy
• ASTM E996-10 Standard Practice for Reporting Data in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy
• ASTM E925-09(2022) Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Bandwidth does not Exceed 2 nm
• ASTM E995-04 Standard Guide for Background Subtraction Techniques in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy
• ASTM E996-94(1999) Standard Practice for Reporting Data in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy
• ASTM E925-83(1994)e1 Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Slit Width does not Exceed 2 nm
• ASTM E925-02 Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Slit Width does not Exceed 2 nm
• ASTM E925-09 Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Slit Width does not Exceed 2 nm
• ASTM G177-03(2020) Standard Tables for Reference Solar Ultraviolet Spectral Distributions: Hemispherical on 37° Tilted Surface
• ASTM E925-09(2014) Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Bandwidth does not Exceed 2 nm
• ASTM E1217-11 Standard Practice for Determination of the Specimen Area Contributing to the Detected Signal in Auger Electron Spectrometers and Some X-Ray Photoelectron Spectrometers
• ASTM G177-03(2012) Standard Tables for Reference Solar Ultraviolet Spectral Distributions: Hemispherical on 37deg; Tilted Surface
• ASTM E1217-00 Standard Practice for Determination of the Specimen Area Contributing to the Detected Signal in Auger Electron Spectrometers and Some X-Ray Photoelectron Spectrometers
• ASTM E1217-05 Standard Practice for Determination of the Specimen Area Contributing to the Detected Signal in Auger Electron Spectrometers and Some X-Ray Photoelectron Spectrometers
• ASTM E1097-97 Standard Guide for Direct Current Plasma Emission Spectrometry Analysis
• ASTM E10-08 Standard Test Method for Brinell Hardness of Metallic Materials
• ASTM E10-15 Standard Test Method for Brinell Hardness of Metallic Materials
• ASTM E995-97 Standard Guide for Background Subtraction Techniques in Auger Electron and X-ray Photoelectron Spectroscopy
• ASTM E996-10(2018) Standard Practice for Reporting Data in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy
• ASTM E996-19 Standard Practice for Reporting Data in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy
• ASTM G130-95(2002) Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
• ASTM G130-95 Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
• ASTM G130-06 Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
• ASTM G130-12(2020) Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
• ASTM E827-08 Standard Practice for Identifying Elements by the Peaks in Auger Electron Spectroscopy
• ASTM D6357-19 Standard Test Methods for Determination of Trace Elements in Coal, Coke, and Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission Spectrometry, Inductively
• ASTM D6357-21 Standard Test Methods for Determination of Trace Elements in Coal, Coke, and Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission Spectrometry, Inductively
• ASTM G177-03 Standard Tables for Reference Solar Ultraviolet Spectral Distributions: Hemispherical on 37 Tilted Surface
• ASTM G177-03e1 Standard Tables for Reference Solar Ultraviolet Spectral Distributions: Hemispherical on 37 Tilted Surface
• ASTM G177-03(2008)e1 Standard Tables for Reference Solar Ultraviolet Spectral Distributions: Hemispherical on 37x00B0; Tilted Surface
• ASTM G130-12 Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
• ASTM E1770-95 Standard Practice for Optimization of Electrothermal Atomic Absorption Spectrometric Equipment
• ASTM E1770-95(2006) Standard Practice for Optimization of Electrothermal Atomic Absorption Spectrometric Equipment
• ASTM E2994-21 Standard Test Method for Analysis of Titanium and Titanium Alloys by Spark Atomic Emission Spectrometry and Glow Discharge Atomic Emission Spectrometry (Performance-Based Method)
• ASTM D7417-17 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
• ASTM E995-11 Standard Guide for Background Subtraction Techniques in Auger Electron Spectroscopy and X-Ray Photoelectron Spectroscopy
• ASTM D5184-12 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
• ASTM E1016-07(2020) Standard Guide for Literature Describing Properties of Electrostatic Electron Spectrometers
• ASTM E902-05 Standard Practice for Checking the Operating Characteristics of X-Ray Photoelectron Spectrometers
• ASTM E2735-14 Standard Guide for Selection of Calibrations Needed for X-ray Photoelectron Spectroscopy 40;XPS41; Experiments
• ASTM E2735-13 Standard Guide for Selection of Calibrations Needed for X-ray Photoelectron Spectroscopy (XPS) Experiments
• ASTM E1127-03 Standard Guide for Depth Profiling in Auger Electron Spectroscopy
• ASTM D8369-21 Standard Test Method for Detailed Hydrocarbon Analysis by High Resolution Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy (GC-VUV)
• ASTM D836-77 Standard test method for detailed analysis of hydrocarbons by high-resolution gas chromatography using vacuum ultraviolet absorption spectrometry (GC-VUV)
• ASTM D836-84 Standard test method for detailed analysis of hydrocarbons by high-resolution gas chromatography using vacuum ultraviolet absorption spectrometry (GC-VUV)
• ASTM E2994-16 Standard Test Method for Analysis of Titanium and Titanium Alloys by Spark Atomic Emission Spectrometry and Glow Discharge Atomic Emission Spectrometry (Performance-Based Method)
• ASTM E2108-16 Standard Practice for Calibration of the Electron Binding-Energy Scale of an X-Ray Photoelectron Spectrometer
• ASTM D8519-23 Standard Test Method for Determination of Hydrocarbon Types in Waste Plastic Process Oil Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV)
• ASTM D5184-00 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
• ASTM D5184-12(2017) Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
• ASTM D5184-22 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
• ASTM E1770-95(2001) Standard Practice for Optimization of Electrothermal Atomic Absorption Spectrometric Equipment
• ASTM E1770-14 Standard Practice for Optimization of Electrothermal Atomic Absorption Spectrometric Equipment
• ASTM D7417-10 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
• ASTM E983-94(1999) Standard Guide for Minimizing Unwanted Electron Beam Effects in Auger Electron Spectroscopy
• ASTM E983-10(2018) Standard Guide for Minimizing Unwanted Electron Beam Effects in Auger Electron Spectroscopy
• ASTM E983-05 Standard Guide for Minimizing Unwanted Electron Beam Effects in Auger Electron Spectroscopy
• ASTM E983-19 Standard Guide for Minimizing Unwanted Electron Beam Effects in Auger Electron Spectroscopy
• ASTM D8234-19 Standard Test Method for Anions in High Ionic Water by Ion Chromatography using Tandem Suppressed Conductivity and UV Detection
• ASTM D6357-11 Test Methods for Determination of Trace Elements in Coal, Coke, & Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission, Inductively Coupled Plasma Mass, & Graphite Furnace Atomic Absorption Spectrometry
• ASTM E2735-14(2020) Standard Guide for Selection of Calibrations Needed for X-ray Photoelectron Spectroscopy (XPS) Experiments
• ASTM D6357-21a Standard Test Methods for Determination of Trace Elements in Coal, Coke, and Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission Spectrometry, Inductively
• ASTM D6357-21b Standard Test Methods for Determination of Trace Elements in Coal, Coke, and Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission Spectrometry, Inductively
• ASTM E1479-16 Standard Practice for Describing and Specifying Inductively Coupled Plasma Atomic Emission Spectrometers

Professional Standard - Agriculture, UV Spectroscopy Electron Spectroscopy

• 772兽药典 二部-2015 Appendix Contents 0400 Spectroscopy 0401 UV-Vis Spectrophotometry
• 775兽药典 一部-2015 Appendix Contents 0400 Spectroscopy 0401 UV-Vis Spectrophotometry
• JJG(教委) 022-1996 Verification Regulations for Ultraviolet and Visible Absorption Spectrometers
• 776兽药典 二部-2015 Appendix Contents 0400 Spectroscopy 0412 Inductively Coupled Plasma Atomic Emission Spectrometry
• 780兽药典 一部-2015 Appendix Contents 0400 Spectroscopy 0411 Inductively Coupled Plasma Atomic Emission Spectrometry
• 781兽药典 一部-2015 Appendix Contents 0400 Spectroscopy 0412 Inductively Coupled Plasma Mass Spectrometry
• 775兽药典 二部-2015 Appendix Contents 0400 Spectroscopy 0411 Inductively Coupled Plasma Mass Spectrometry
• 72药典 四部-2015 0411 Inductively coupled plasma atomic emission spectrometry
• 52药典 四部-2020 0411 Inductively coupled plasma atomic emission spectrometry
• 1808药典 一部-2010 Appendix XI E Inductively Coupled Plasma Atomic Emission Spectrometry
• GB 10725-1989 General rules for chemical reagent inductively coupled high frequency plasma atomic emission spectrometry

Group Standards of the People's Republic of China, UV Spectroscopy Electron Spectroscopy

• T/ZSA 39-2020 Characterization of Graphene - Work function - Ultraviolet photoelectron spectroscopy (UPS) method
• T/ZGIA 002-2020 Graphene Test Methods Determination of Work Function Ultraviolet Photoelectron Spectroscopy
• T/CAQI 74-2019 Jewelry and jade identification by ultraviolet-visible spectroscopy
• T/GXAS 356-2022 Rapid screening of polysaccharides content in Ganoderma lucidum spore by near infrared spectroscopy
• T/CAIA SH004-2015 Rice-Determination of cadmium-Solid sampling electrothermal vaporization atomic fluorescence spectrometry
• T/CSTM 00962-2022 Evaluation method for spectrometer performance of spark discharge atomic emission
• T/CSTE 0007-2020 Determination of Trace Carbon Monoxide in Hydrogen Fuel - The Method of Mid-infrared Laser Spectroscopy for PEMFC
• T/QAS 057-2021 Determination of Lithium in Brine by Inductively Coupled Plasma Emission Spectrometry
• T/QAS 051-2021 Determination of boron in brine by inductively coupled plasma emission spectrometry
• T/QAS 040-2021 Determination of silicon brine by inductively coupled plasma emission spectrometry
• T/CSTM 00014-2019 Iron and steel-Determination of silicon content- Inductively coupled plasma atomic emission spectrometric method
• T/CMES 08007-2020 Determination of manganese, iron and phosphorus content by inductively coupled plasma atomic emission spectrometry
• T/CSTM 00847-2022 Materials experimental data—Requirements for spark discharge atomic emission spectrometry data
• T/QAS 052-2021 Determination of total iron in brine by inductively coupled plasma emission spectrometry
• T/CMES 08002-2020 Determination of Ferroniobium Impurity Elements by Inductively Coupled Plasma Atomic Emission Spectrometry
• T/QAS 041-2021 Determination of barium and strontium in brine by inductively coupled plasma emission spectrometry
• T/NXCL 024-2023 Method for chemical analysis of beryllium — Determination of beryllium oxide content—Inductively coupled plasma atomic emission spectrometry
• T/CMES 08008-2020 Determination of molybdenum, iron, phosphorus, copper, silicon, tin, antimony by inductively coupled plasma atomic emission spectrometry

Professional Standard - Education, UV Spectroscopy Electron Spectroscopy

• JY/T 022-1996 General rules for ultraviolet and visible absorption spectroscopic methods
• JY/T 0570-2020 General rules for ultraviolet and visible absorption spectrometry
• JY/T 0565-2020 General rules for electrothermal atomic absorption spectrometry
• JY/T 0567-2020 General rules for inductively coupled plasma optical emission spectrometry

Shandong Provincial Standard of the People's Republic of China, UV Spectroscopy Electron Spectroscopy

• DB37/T 4115-2020 Jewelry and jade identification by ultraviolet-visible spectroscopy
• DB37/T 3786-2019 Determination of gaseous pollutants such as hydrogen sulfide in ambient air Open path ultraviolet absorption spectrometry
• DB37/T 3040-2017 Determination of Chromium in Feed by Inductively Coupled Plasma-Atomic Emission Spectrometry
• DB37/T 3042-2017 Determination of Molybdenum in Feedstuffs by Inductively Coupled Plasma-Atomic Emission Spectrometry
• DB37/T 1092-2008 Determination of Chromium in Food by Inductively Coupled Plasma-Atomic Emission Spectrometry
• DB37/T 3041-2017 Determination of Phosphorus and Sulfur in Feedstuffs by Inductively Coupled Plasma-Atomic Emission Spectrometry
• DB37/T 2060-2012 Determination of Chromium in Fertilizers by Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES)
• DB37/T 2059-2012 Determination of Lead and Cadmium in Fertilizers Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES)

NL-NEN, UV Spectroscopy Electron Spectroscopy

• NEN 6306-1990 Vegetable and animal oils and fats Determination of extinction co?ffici?nt in the ultraviolet spectre

Professional Standard - Medicine, UV Spectroscopy Electron Spectroscopy

• YY 91060-1999 Vocabulary of biochemical instruments.UV-VIS spectrophotometry

Association Francaise de Normalisation, UV Spectroscopy Electron Spectroscopy

• NF ISO 4735:2002 Huiles essentielles de Citrus - Détermination de la valeur CD par analyse spectrométrique dans l'ultraviolet
• NF ISO 10640:2011 Plastiques - Méthodologie d'évaluation du photovieillissement des polymères par spectroscopie IRTF et UV/visible
• NF S10-111-1*NF EN ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1 : components for the UV, visible and near-infrared spectral ranges
• NF X21-061:2008 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Determination of lateral resolution.
• NF EN ISO 11151-1:2015 Lasers et équipements associés aux lasers - Composants optiques standards - Partie 1 : composants pour les plages spectrales UV, visible et proche de l'infrarouge
• NF S10-111-1:2001 Laser and laser-related equipment - Standard optical components - Part 1 : components for the UV, visible and near-infrared spectral ranges.
• NF EN 17178:2019 Produits pétroliers liquides - Détermination de la teneur en soufre volatil dans les gaz de pétrole liquéfiés par spectroscopie de fluorescence ultra-violette
• NF M41-027*NF EN 17178:2019 Liquid petroleum products - Determination of the total volatile sulfur content in liquefied petroleum gases by ultraviolet fluorescence spectroscopy
• NF T51-182*NF ISO 10640:2011 Plastics - Methodology for assessing polymer photoageing by FTIR and UV/visible spectroscopy.
• NF C05-100-4*NF EN 62321-4:2014 Determination of certain substances in electrotechnical products - Part 4 : mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS
• FD M07-170:2018 Produits pétroliers - Détermination de la teneur en colorants et traceur fiscaux - Méthode par chromatographie liquide haute performance et détection par spectrométrie UV-Visible
• NF EN IEC 61280-1-3:2021 Procédures d'essai des sous-systèmes de télécommunication fibroniques - Partie 1-3 : sous-systèmes généraux de télécommunication - Mesure de la longueur d'onde centrale, de la largeur spectrale et des caractéristiques spectrales supplément...
• NF C05-100-5*NF EN 62321-5:2014 Determination of certain substances in electrotechnical products - Part 5 : cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS
• NF M07-073:2001 Petroleum products - Determination of the content of total aromatic hydrocarbons in saturated fractions - Ultra-Violet absorbance spectrometric method for low contents.
• NF X21-058:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Methods used to determine peak intensities and information required when reporting results.
• NF A08-702*NF EN 15605:2010 Copper and copper alloys - Inductively coupled plasma optical emission spectrometry
• XP A06-422*XP ENV 14029:2001 Lead and lead alloys - Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), after separation of the lead matrix
• XP M07-113:2003 Produits pétroliers - Détermination de la teneur en traceur Solvent Yellow 124 dans les distillats moyens - Méthode par chromatographie liquide à haute performance avec détection par spectrophotométrie UV-Visible
• NF V04-280:1991 Cheese and cheese rind. Determination of natamycin content. Method by molecular absorption spectrometry and by high performance liquid chromatography.
• FD ISO 8518:2002 Air des lieux de travail - Dosage du plomb particulaire et des composés particulaires du plomb - Méthode par spectrométrie d'absorption atomique dans la flamme ou méthode par spectrométrie d'absorption avec atomisation électrothermique
• NF X21-071:2011 Surface Chemical Analysis - X-ray photoelectron Spectroscopy - Guidelines for analysis.
• NF M07-084:1995 Liquid fuels. Determinatio of colza methyl ester content in middle distillate. Method by infrared spectroscopy.
• XP A06-421*XP ENV 13800:2000 Lead and lead alloys - Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), without separation of the lead matrix
• XP A06-424*XP ENV 14138:2002 Lead and lead alloys - Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), after separation by co-precipitation
• NF A06-840-2*NF EN ISO 3815-2:2005 Zinc and zinc alloys - Part 2 : analysis by inductively coupled plasma optical emission spectrometry
• NF X21-002:2007 Microbeam analysis - Electron probe microanalysis - Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy.

海关总署, UV Spectroscopy Electron Spectroscopy

• SN/T 5153-2019 Determination of fluorescent whitening agent content in household paper by UV spectroscopy
• SN/T 5304-2021 Determination of total sulfur and phosphorus in coal by inductively coupled plasma atomic emission spectrometry

Military Standard of the People's Republic of China-General Armament Department, UV Spectroscopy Electron Spectroscopy

• GJB 506-1988 Testing method for spectral performance of UV filter quartz glass tubes
• GJB/Z 48.1A-2011 Series programmes for military electronic components and devices Optical fibres
• GJB/Z 49.1A-2013 Military electronic components series type spectrum optical cable
• GJB/Z 40.6-1993 Military vacuum electronic devices series spectrum vacuum optoelectronic devices
• GJB/Z 40.4-1993 Military vacuum electronic device series spectrum plasma, fluorescence and glow display devices
• GJB/Z 41.3-1993 Military semiconductor discrete device series spectrum semiconductor optoelectronic devices

British Standards Institution (BSI), UV Spectroscopy Electron Spectroscopy

• BS PD ISO/TS 17466:2015 Use of UV-Vis absorption spectroscopy in the characterization of cadmium chalcogenide colloidal quantum dots
• PD ISO/TS 17466:2015 Use of UV-Vis absorption spectroscopy in the characterization of cadmium chalcogenide colloidal quantum dots
• BS EN ISO 11151-1:2000 Lasers and laser-related equipment. Standard optical components. Components for the UV, visible and near-infrared spectral ranges
• BS EN ISO 11151-1:2015 Lasers and laser-related equipment. Standard optical components. Components for the UV, visible and near-infrared spectral ranges
• BS ISO 18516:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Determination of lateral resolution
• BS ISO 16129:2012 Surface chemical analysis. X-ray photoelectron spectroscopy. Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer
• BS ISO 22576:2020 Optics and photonics. Optical materials and components. Specification of calcium fluoride used in the infrared spectrum
• BS EN 17178:2019 Liquid petroleum products. Determination of the total volatile sulfur content in liquefied petroleum gases by ultraviolet fluorescence spectroscopy
• 19/30362632 DC BS ISO 22576. Optics and photonics. Optical materials and components. Specification of calcium fluoride used in the infrared spectrum
• BS ISO 16129:2018 Tracked Changes. Surface chemical analysis. X-ray photoelectron spectroscopy. Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer
• BS EN 62321-5:2014 Determination of certain substances in electrotechnical products. Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS
• BS ISO 11382:2011 Optics and photonics. Optical materials and components. Characterization of optical materials used in the infrared spectral range from 0,78 $Gmm to 25 $Gmm
• BS ISO 19830:2015 Surface chemical analysis. Electron spectroscopies. Minimum reporting requirements for peak fitting in X-ray photoelectron spectroscopy
• BS ISO 18554:2016 Surface chemical analysis. Electron spectroscopies. Procedures for identifying, estimating and correcting for unintended degradation by X-rays in a material undergoing analysis by X-ray photoelectron spectroscopy
• BS ISO 21270:2005 Surface chemical analysis - X-ray photoelectron and Auger electron spectrometers - Linearity of intensity scale
• BS ISO 11437:2018 Nickel alloys. Determination of lead. Electrothermal atomic absorption spectrometric method
• BS ISO 21270:2004 Surface chemical analysis. X-ray photoelectron and Auger electron spectrometers. Linearity of intensity scale
• 22/30444633 DC BS ISO 11382. Optics and photonics. Optical materials and components. Characterization of optical materials used in the infrared spectral range from 0,78 µm to 25 µm
• PD ISO/TS 10868:2017 Tracked Changes. Nanotechnologies. Characterization of single-wall carbon nanotubes using ultraviolet-visible-near infrared (UV-Vis-NIR) absorption spectroscopy
• BS 3727-20:1966 Methods for the analysis of nickel for use in electronic tubes and valves - Spectrographic method
• BS ISO 11382:2022 Optics and photonics. Optical materials and components. Characterization of optical materials used in the infrared spectral range from 0,78 µm to 25 µm
• BS ISO 18118:2005 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
• BS EN 15605:2010 Copper and copper alloys.Inductively coupled plasma optical emission spectrometry
• BS ISO 20258:2018 Magnesium lithium alloys. Determination of lithium. Inductively coupled plasma optical emission spectrometric method
• BS EN ISO 26845:2009 Chemical analysis of refractories. General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods
• BS EN ISO 26845:2008 Chemical analysis of refractories - General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods
• BS ISO 20903:2011 Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Methods used to determine peak intensities and information required when reporting results
• BS ISO 10810:2010 Surface chemical analysis. X-ray photoelectron spectroscopy. Guidelines for analysis
• DD ENV 14138:2001 Lead and lead alloys. Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emissions spectrometry (ICP-ES), after separation by co-precipitation
• DD ENV 14029:2001 Lead and lead alloys. Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), after separation of the lead matrix
• BS ISO 16531:2013 Surface chemical analysis. Depth profiling. Methods for ion beam alignment and the associated measurement of current or current density for depth profiling in AES and XPS
• BS PD ISO/TR 18394:2016 Surface chemical analysis. Auger electron spectroscopy. Derivation of chemical information
• BS ISO 24237:2005 Surface chemical analysis - X-ray photoelectron spectroscopy - Repeatability and constancy of intensity scale
• 22/30444828 DC BS EN 14242. Aluminium and aluminium alloys. Chemical analysis. Inductively coupled plasma optical emission spectral analysis
• BS ISO 11938:2012 Microbeam analysis. Electron probe microanalysis. Methods for elemental-mapping analysis using wavelength-dispersive spectroscopy
• 18/30372392 DC BS ISO 23166. Nickel alloys. Determination of tantalum. Inductively coupled plasma atomic emission spectrometric method

International Organization for Standardization (ISO), UV Spectroscopy Electron Spectroscopy

• ISO/TS 17466:2015 Use of UV-Vis absorption spectroscopy in the characterization of cadmium chalcogenide colloidal quantum dots
• ISO 11151-1:2000 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges
• ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges
• ISO 18516:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Determination of lateral resolution
• ISO 22576:2020 Optics and photonics — Optical materials and components — Specification of calcium fluoride used in the infrared spectrum
• ISO/DIS 8237:2014 Optics and photonics — Optical materials and components — Specification of chalcogenide glass used in the infrared spectrum
• ISO 16129:2012 Surface chemical analysis - X-ray photoelectron spectroscopy - Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer
• ISO 16129:2018 Surface chemical analysis — X-ray photoelectron spectroscopy — Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer
• ISO 5666-2:1983 Water quality; Determination of total mercury by flameless atomic absorption spectrometry; Part 2: Method after pretreatment with ultraviolet radiation
• ISO/TS 10868:2011 Nanotechnologies - Characterization of single-wall carbon nanotubes using ultraviolet-visible-near infrared (UV-Vis-NIR) absorption spectroscopy
• ISO/TS 10868:2017 Nanotechnologies - Characterization of single-wall carbon nanotubes using ultraviolet-visible-near infrared (UV-Vis-NIR) absorption spectroscopy
• ISO 11382:2022 Optics and photonics — Optical materials and components — Characterization of optical materials used in the infrared spectral range from 0,78 μm to 25 μm
• ISO 19830:2015 Surface chemical analysis - Electron spectroscopies - Minimum reporting requirements for peak fitting in X-ray photoelectron spectroscopy
• ISO 18554:2016 Surface chemical analysis - Electron spectroscopies - Procedures for identifying, estimating and correcting for unintended degradation by X-rays in a material undergoing analysis by X-ray photoelectron spectroscopy
• ISO/TR 18392:2005 Surface chemical analysis - X-ray photoelectron spectroscopy - Procedures for determining backgrounds
• ISO 21270:2004 Surface chemical analysis - X-ray photoelectron and Auger electron spectrometers - Linearity of intensity scale
• ISO 18118:2004 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
• ISO 18118:2015 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
• ISO 10698:1994 Steel - Determination of antimony content - Electrothermal atomic absorption spectrometric method
• ISO 11437:2018 Nickel alloys — Determination of lead — Electrothermal atomic absorption spectrometric method
• ISO 9233:1991 Cheese and cheese rind; determination of natamycin content; method by molecular absorption spectrometry and by high-performance liquid chromatography
• ISO 20903:2019 Surface chemical analysis — Auger electron spectroscopy and X-ray photoelectron spectroscopy — Methods used to determine peak intensities and information required when reporting results
• ISO 20279:2005 Soil quality - Extraction of thallium and determination by electrothermal atomic absorption spectrometry
• ISO 10810:2019 Surface chemical analysis — X-ray photoelectron spectroscopy — Guidelines for analysis
• ISO 20903:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Methods used to determine peak intensities and information required when reporting results
• ISO 4155:2022 Magnesium and magnesium alloys — Determination of nickel — Inductively coupled plasma optical emission spectrometric method
• ISO/TS 19620:2018 Water quality - Determination of arsenic(III) and arsenic(V) species - Method using high performance liquid chromatography (HPLC) with detection by inductively coupled plasma mass spectrometry (ICP-MS) or hydride generation atomic fluorescence spectrometr
• ISO 16531:2013 Surface chemical analysis - Depth profiling - Methods for ion beam alignment and the associated measurement of current or current density for depth profiling in AES and XPS
• ISO 22033:2011 Nickel alloys - Determination of niobium - Inductively coupled plasma/atomic emission spectrometric method
• ISO 10810:2010 Surface chemical analysis - X-ray photoelectron spectroscopy - Guidelines for analysis
• ISO 24237:2005 Surface chemical analysis - X-ray photoelectron spectroscopy - Repeatability and constancy of intensity scale
• ISO 29441:2010 Water quality - Determination of total nitrogen after UV digestion - Method using flow analysis (CFA and FIA) and spectrometric detection
• ISO 11885:1996 Water quality - Determination of 33 elements by inductively coupled plasma atomic emission spectroscopy
• ISO/TR 18394:2006 Surface chemical analysis - Auger electron spectroscopy - Derivation of chemical information
• ISO 11435:2011 Nickel alloys - Determination of molybdenum content - Inductively coupled plasma/atomic emission spectrometric method
• ISO 10278:1995 Steel - Determination of maganese content - Inductively coupled plasma atomic emission spectrometric method
• ISO 3815-2:2005 Zinc and zinc alloys - Part 2: Analysis by inductively coupled plasma optical emission spectrometry
• ISO 22309:2006 Microbeam analysis - Quantitative analysis using energy-dispersive spectrometry (EDS)
• ISO/CD TR 18392:2023 Surface chemical analysis — X-ray photoelectron spectroscopy — Procedures for determining backgrounds
• ISO 17109:2022 Surface chemical analysis — Depth profiling — Method for sputter rate determination in X-ray photoelectron spectroscopy, Auger electron spectroscopy and secondary-ion mass spectrometry sputter depth p
• ISO 11535:1998 Iron ores - Determination of various elements - Inductively coupled plasma atomic emission spectrometric method

Danish Standards Foundation, UV Spectroscopy Electron Spectroscopy

• DS/CEN/CR 13840:2000 Petroleum products - Determination of polycyclic aromatic hydrocarbons - Ultraviolet (UV) spectrometric method
• DS/EN ISO 11151-1:2000 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges
• DS/ISO/TS 10868:2011 Nanotechnologies - Characterization of single-wall carbon nanotubes using ultraviolet-visible-near infrared (UV-Vis-NIR) absorption spectroscopy
• DS/ISO 29441:2010 Water quality - Determination of total nitrogen after UV digestion - Method using flow analysis (CFA and FIA) and spectrometric detection
• DS/EN 14242:2004 Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis
• DS/EN 15605:2010 Copper and copper alloys - Inductively coupled plasma optical emission spectrometry
• DS/ENV 14029:2001 Lead and lead alloys - Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), after separation of the lead matrix
• DS/EN ISO 26845:2008 Chemical analysis of refractories - General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods
• DS/ENV 13800:2001 Lead and lead alloys - Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), without separation of the lead matrix
• DS/ENV 14138:2002 Lead and lead alloys - Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), after separation by co-precipitation
• DS/EN ISO 20565-3:2009 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-

Taiwan Provincial Standard of the People's Republic of China, UV Spectroscopy Electron Spectroscopy

• CNS 14247-1998 Method of test for naphthalene hydrocarbons in aviation turbine fuels by ultravioet spectrophotometry
• CNS 13875-1997 Method of test for aluminum and silicon in fuel oils by ashing,fusion,inductively coupled plasma atomic emission spectrometry and atomic absorption spectrometry

PH-BPS, UV Spectroscopy Electron Spectroscopy

• PNS ISO/TS 17466:2021 Use of UV-Vis absorption spectroscopy in the characterization of cadmium chalcogenide colloidal quantum dots

German Institute for Standardization, UV Spectroscopy Electron Spectroscopy

• DIN EN ISO 11151-1:2000 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the ultraviolet, visible and near-infrared spectral range (ISO 11151-1:2000); German version EN ISO 11151-1:2000
• DIN EN ISO 11151-1:2015-12 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2015); German version EN ISO 11151-1:2015
• DIN EN 17178:2018 Liquid petroleum products - Determination of the total volatile sulfur content in liquefied petroleum gases by ultraviolet fluorescence spectroscopy; German and English version prEN 17178:2018
• DIN EN 17178:2019 Liquid petroleum products - Determination of the total volatile sulfur content in liquefied petroleum gases by ultraviolet fluorescence spectroscopy
• DIN EN 17178:2019-12 Liquid petroleum products - Determination of the total volatile sulfur content in liquefied petroleum gases by ultraviolet fluorescence spectroscopy; German version EN 17178:2019
• DIN ISO 16129:2020-11 Surface chemical analysis - X-ray photoelectron spectroscopy - Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer (ISO 16129:2018); Text in English
• DIN EN ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2015); German version EN ISO 11151-1:2015
• DIN EN 62321-4:2014 Determination of certain substances in electrotechnical products - Part 4: Mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS (IEC 62321-4:2013); German version EN 62321-4:2014
• DIN ISO 16129:2020 Surface chemical analysis - X-ray photoelectron spectroscopy - Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer (ISO 16129:2018); Text in English
• DIN EN 15605:2010-12 Copper and copper alloys - Inductively coupled plasma optical emission spectrometry; German version EN 15605:2010
• DIN EN 62321-5:2014 Determination of certain substances in electrotechnical products - Part 5: Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS (IEC 62321-5:2013); German version EN 62321-5:2014
• DIN EN 62321-4:2018 Determination of certain substances in electrotechnical products - Part 4: Mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS (IEC 62321-4:2013 + A1:2017); German version EN 62321-4:2014 + A1:2017
• DIN EN 14242:2004 Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis; German version EN 14242:2004
• DIN EN 13708:2002 Foodstuffs - Detection of irradiated food containing crystalline sugar by ESR-spectroscopy; German version EN 13708:2001
• DIN 38404-3:2005 German standard methods for the examination of water, waste water and sludge - Physical and physicochemical parameters (group C) - Part 3: Determination of spectral absorption in the UV range, Spectral absorptions coefficient (C 3)
• DIN EN ISO 26845:2008-06 Chemical analysis of refractories - General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods (ISO 26845:2008); German version EN ISO 26845:2008
• DIN ISO 20279:2006 Soil quality - Extraction of thallium and determination by electrothermal atomic absorption spectrometry (ISO 20279:2005);English version of DIN ISO 20279:2006-01
• DIN 51790-4:2011 Testing of liquid fuels - Determination of the vanadium and nickel content - Part 4: Determination by atomic absorption spectrometry (AAS) or by optical emission spectral analysis with inductively coupled plasma (ICP OES) after incineration

ES-UNE, UV Spectroscopy Electron Spectroscopy

• UNE-EN ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2015)
• UNE-EN 17178:2020 Liquid petroleum products - Determination of the total volatile sulfur content in liquefied petroleum gases by ultraviolet fluorescence spectroscopy

国家能源局, UV Spectroscopy Electron Spectroscopy

• SY/T 7657.2-2021 Determination of natural gas using photoacoustic spectroscopy-infrared spectroscopy-fuel cell combined method Part 2: Determination of methane content by photoacoustic spectroscopy
• SY/T 7657.1-2021 Determination of natural gas using photoacoustic spectroscopy-infrared spectroscopy-fuel cell combined method Part 1: General principles
• SY/T 7657.3-2021 Part 3 of the combined photoacoustic spectroscopy-infrared spectroscopy-fuel cell determination method for natural gas: Determination of the content of ethane and above alkanes, carbon dioxide and carbon monoxide by infrared spectroscopy
• SY/T 7657.4-2021 Determination of natural gas using photoacoustic spectroscopy-infrared spectroscopy-fuel cell combined method Part 4: Determination of hydrogen content by fuel cell method
• SH/T 0940-2016 Test methods for analyzing in-service lubricants using specific four-in-one testers (atomic emission spectrometry, infrared spectroscopy, viscosity and laser particle counter)
• SY/T 6404-2018 Inductively coupled plasma atomic emission spectrometry and mass spectrometry analysis methods of metal elements in rocks

European Committee for Standardization (CEN), UV Spectroscopy Electron Spectroscopy

• EN ISO 11151-1:2000 Lasers and Laser-Related Equipment - Standard Optical Components - Part 1: Components for the UV, Visible and Near-Infrared Spectral Ranges ISO 11151-1: 2000
• EN ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2015)
• prEN 25666-2-1992 Water quality; determination of total mercury by flameless atomic absorption spectrometry; part 2: method after pretreatment with ultraviolet radiation (ISO 5666-2:1983)
• EN 14242:2004 Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis
• EN ISO 26845:2008 Chemical analysis of refractories - General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods

ES-AENOR, UV Spectroscopy Electron Spectroscopy

• UNE 77-401-1992 Ecotoxicology. Determination of UV-VIS absorption spectra of a chemical compoud

Professional Standard - Chemical Industry, UV Spectroscopy Electron Spectroscopy

• HG/T 3027-1988(1997) Determination of plasticizer content in polymethylmethacrylate-Ultraviolet spectrometry method
• HG/T 3027-1988 Determination of plasticizer content in polymethylmethacrylate-Ultraviolet spectrometry method
• HG/T 4952-2016 Determination of ultraviolet absorbent for TAC film by High Performance Liquid Chromatographic method

Lithuanian Standards Office , UV Spectroscopy Electron Spectroscopy

• LST EN ISO 11151-1:2002 Laser and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2000)
• LST EN 62321-4-2014 Determination of certain substances in electrotechnical products - Part 4: Mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS (IEC 62321-4:2013)
• LST EN 62321-5-2014 Determination of certain substances in electrotechnical products - Part 5: Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS (IEC 62321-5:2013)
• LST EN 14242-2005 Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis
• LST EN 15605-2010 Copper and copper alloys - Inductively coupled plasma optical emission spectrometry
• LST EN ISO 20565-3:2009 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-

RU-GOST R, UV Spectroscopy Electron Spectroscopy

• GOST R 59422.1-2021 Optics and photonics. Lasers and laser-related equipment. Standard optical elements. Part 1. Standard optical elements for laser equipment operating in the ultraviolet, visible and near-infrared spectral ranges. General technical requirements
• GOST 8.410-1981 State system for ensuring the uniformity of measurements. State verification schedule for means measuring plasma temperature of 10000-15000 K in the visible and ultraviolet
• GOST R 52371-2005 Tin and lead babbits. Method of inductively coupled plasma atomic-emission spectrometry
• GOST R 59422.2-2021 Optics and photonics. Lasers and laser-related equipment. Standard optical elements. Part 2. Standard optical elements for laser equipment operating in the infrared spectral range. General technical requirements
• GOST R 51927-2002 Steel and cast iron. Atomic emission nith inductively coupled plasma spectral method of calcium determination

YU-JUS, UV Spectroscopy Electron Spectroscopy

• JUS E.K8.051-2000 Edible olive oil and edible olive-pomace oil - Determination of ultraviolet absorbance

CEN - European Committee for Standardization, UV Spectroscopy Electron Spectroscopy

• PREN 17178-2018 Liquid petroleum products - Determination of the total volatile sulfur content in liquefied petroleum gases by ultraviolet fluorescence spectroscopy

AT-ON, UV Spectroscopy Electron Spectroscopy

• ONORM ISO 5666 Teil.2:1984 Water quality; determination of total mercury by flameless atomic absorption spectrometry; method after pretreatment with ultraviolett radiation
• ONORM M 6605-1992 Water quality - Determination of dissolved silver by electrothermal atomisation atomic absorption spectrometry

Japanese Industrial Standards Committee (JISC), UV Spectroscopy Electron Spectroscopy

• JIS G 1258:1999 Iron and steel -- Methods for inductively coupled plasma atomic emission spectrometry
• JIS G 1253:2002 Iron and steel -- Method for spark discharge atomic emission spectrometric analysis
• JIS K 1310-3:2000 Hydrochloric acid for industrial use -- Part 3: Determination of iron content -- 1,10-Phenanthroline molecular absorption spectrometry, Electrothermal type atomic absorption spectrometry, inductively coupled plasma atomic emission spectrometry
• JIS M 8206:2014 Iron ores -- Inductively coupled plasma atomic emission spectrometric method
• JIS K 0167:2011 Surface chemical analysis -- Auger electron spectroscopy and X-ray photoelectron spectroscopy -- Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
• JIS H 1288:2015 Nickel and nickel alloys -- Methods for spark discharge atomic emission spectrometric analysis
• JIS H 1322:2017 Magnesium and magnesium alloys -- Method for spark discharge atomic emission spectrometric analysis
• JIS G 1253 AMD 1:2013 Iron and steel.Method for spark discharge atomic emission spectrometric analysis (Amendment 1)
• JIS T 0306:2002 Analysis of state for passive film formed on metallic biomaterials by X-ray photoelectron spectroscopy
• JIS G 1257-20:2013 Iron and steel -- Atomic absorption spectrometric method -- Part 20: Determination of selenium -- Electrothermal atomization

Professional Standard - Commodity Inspection, UV Spectroscopy Electron Spectroscopy

• SN/T 2004.1-2005 Determination of mercury in electrical and electronic equipment-Part 1:Hydride generation-atomic fluorescence spectrometric method
• SN/T 2004.7-2006 Determination of lead,cadmium in electrical and electronic equipment.Part 7:Atomic fluorescence spectrometry
• SN/T 2592.2-2010 Determination of organotin compounds in electrical and electronic equipment.Part 2:Screening by Fourier transform infrared spectrometry
• SN/T 2004.2-2005 Determination of lead,cadmium and chromium in electrical and electronic equipment-Part 2:Flame atomic absorption spectrometric method
• SN/T 2718-2010 Determination of chemical composition in stainless steel-Inductively coupled plasma atomic emission spectrometric method
• SN/T 1600-2005 Determination of Trace Elements in Coal by Inductively Coupled Plasma-Atomic Emission Spectrometry
• SN/T 2003.2-2006 Determination of polybrominatedbiphenyls and polybrominatedbiphenyl ether in electrical and electronic equipments - Part 2: Qualitative screening by infra-red spectrometric method
• SN/T 2003.1-2005 Determination of lead,mercury,cadmium,chromium and bromine in electrical and electronic equipment-Part 1:Qualitative screening by wavelength dispersive X-ray fluorescence spectrometric method
• SN/T 2698-2010 Elemental analysis of impurities in tungsten products.Inductively coupled plasma atomic emission spectrometric method
• SN/T 1599-2005 Determination of Main Components in Coal Ash by Inductively Coupled Plasma-Atomic Emission Spectrometry
• SN/T 2953-2011 Determination of silicon, manganese, phosphorus and chromium in pig iron by inductively coupled plasma atomic emission spectrometry

PL-PKN, UV Spectroscopy Electron Spectroscopy

• PN-EN 17178-2020-01 P Liquid petroleum products--Determination of the total volatile sulfur content in liquefied petroleum gases by ultraviolet fluorescence spectroscopy

Professional Standard - Non-ferrous Metal, UV Spectroscopy Electron Spectroscopy

• YS/T 536.4-2009 Methods for chemical analysis of bismuth.Determination of silver content.Flame atomic absorption spectrophotmetric method and electrothermal atomic absorption spectrometric method
• YS/T 1035-2015 Determination of carbon content in aluminum electrolyte.IR absorption spectrometry method
• YS/T 739-2010 Determination of cryolite rate and main components of electrolyte-X-ray fluorescence spectrometric analysis method
• YS/T 276.5-2011 Methods for chemical analysis of indium.Part 5:Determination of iron content.Method 1:Graphite furnace atomic absorption spectrometry.Method 2:Flame atomic absorption spectrometry
• YS/T 768-2011 Flame atomic absorption spectrometric analysis method of lithium in electrolyte cryolite
• YS/T 536.6-2006 Bismuth Chemical Analysis Method Electrothermal Atomic Absorption Spectrometry Determination of Lead
• YS/T 536.12-2006 Bismuth Chemical Analysis Method Electrothermal Atomic Absorption Spectrometry Determination of Nickel Content
• YS/T 536.2-2009 Methods for chemical analysis of bismuth.Determination of iron content.Electrothermal atomic absorption spectrometric method
• YS/T 536.6-2009 Methods for chemical analysis of bismuth.Determination of lead content.Electrothermal atomic absorption spectrometric method
• YS/T 536.12-2009 Methods for chemical analysis of bismuth.Determination of nickel content.Electrothermal atomic absorption spectrometric method
• YS/T 536.13-2009 Methods for chemical analysis of bismuth.Determination of cadmium content.Electrothermal atomic absorption spectrometric method
• YS/T 536.13-2006 Bismuth Chemical Analysis Method Electrothermal Atomic Absorption Spectrometry Determination of Silver and Cadmium

Liaoning Provincial Standard of the People's Republic of China, UV Spectroscopy Electron Spectroscopy

• DB21/T 2079-2013 Polyvinyl chloride (PVC) cable material analysis - infrared spectroscopy

工业和信息化部, UV Spectroscopy Electron Spectroscopy

• YS/T 3015.6-2017 Methods for chemical analysis of gold-loaded carbon Part 6: Determination of mercury content Atomic fluorescence spectrometry and inductively coupled plasma atomic emission spectrometry
• YS/T 3015.7-2017 Methods for chemical analysis of gold-loaded carbon Part 7: Determination of arsenic content Atomic fluorescence spectrometry and inductively coupled plasma atomic emission spectrometry
• YS/T 482-2022 Analysis methods for copper and copper alloys Spark discharge atomic emission spectrometry
• YS/T 1057.4-2022 Methods for chemical analysis of cobalt tetroxide Part 4: Determination of potassium and sodium content Flame atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry
• YS/T 1157.3-2016 Methods for chemical analysis of crude cobalt hydroxide Part 3: Determination of calcium and magnesium content Flame atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry
• SJ/T 11698-2018 Lead-free solder chemical analysis method Inductively coupled plasma atomic emission spectrometry

Professional Standard - Electron, UV Spectroscopy Electron Spectroscopy

• SJ/T 10458-1993 Standard guide for specimen handling in auger electron spectroscopy and X-ray photoelectron spectroscopy
• SJ/T 10714-1996 Standard practice for checking the operation characteristics of X-ray photoelectron spectrometers
• SJ/T 10553-2021 Method of emission specthchemical analysis of impurities in ZrO2 for use in electron ceramics
• SJ/T 10552-2021 Method of emission specthchemical analysis of impurities in TiO2 for use in electron ceramics
• SJ/T 10552-1994 Method of emission specthochemical analysis of impurities in TiO2 for use in electron ceramics
• SJ/T 10553-1994 Method of emission spectrochemical analysis of impurities in ZrO2 for use in electron ceramics

Illuminating Engineering Society of North America, UV Spectroscopy Electron Spectroscopy

• IESNA TM-27-2014 IES Standard Format for the Electronic Transfer of Spectral Data

Professional Standard - Petrochemical Industry, UV Spectroscopy Electron Spectroscopy

• SH/T 0706-2001 Petroleum products-Determination of aluminium and silicon in fuel oils-Inductively coupled plasma emission and atomic absorption spectroscopy methods

国家质量监督检验检疫总局, UV Spectroscopy Electron Spectroscopy

• SN/T 4668-2016 Qualitative Analysis of Imported and Exported Textile Fibers by UV Diffuse Reflectance Spectrometry of Natural Colored Cotton

SE-SIS, UV Spectroscopy Electron Spectroscopy

• SIS SS IEC 714:1983 Electronic measurement equipment - Expression of the properties of spectrum analyzers

International Electrotechnical Commission (IEC), UV Spectroscopy Electron Spectroscopy

• IEC 62321-5:2013 Determination of certain substances in electrotechnical products - Part 5: Determination of cadmium, lead, and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP- OES and ICP-MS
• IEC 60747-5-16:2023 Semiconductor devices - Part 5-16: Optoelectronic devices - Light emitting diodes - Test method of the flat-band voltage of GaN-based light emitting diodes based on the photocurrent spectroscopy
• IEC 60747-5-15:2022 Semiconductor devices - Part 5-15: Optoelectronic devices - Light emitting diodes - Test method of the flat-band voltage based on the electroreflectance spectroscopy

National Metrological Verification Regulations of the People's Republic of China, UV Spectroscopy Electron Spectroscopy

• JJG(教委) 07-1992 Inductively Coupled Plasma Atomic Emission Spectrometry Verification Regulations
• JJG(地质) 1015-1990 Verification regulations for inductively coupled plasma direct reading spectrometer

Professional Standard - Energy, UV Spectroscopy Electron Spectroscopy

• NB/SH/T 0940-2016 Test method for the analysis of in-use lubricants using a specific 4-in-1 tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity and Laser Particle Counter)

未注明发布机构, UV Spectroscopy Electron Spectroscopy

• BS ISO 18516:2006(2010) Surface chemical analysis — Auger electron spectroscopy and X - ray photoelectron spectroscopy — Determination of lateral resolution
• BS ISO 21270:2004(2010) Surface chemical analysis — X - ray photoelectron and Auger electron spectrometers — Linearity of intensity scale
• BS EN ISO 26845:2008(2009) Chemical analysis of refractories — General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP - AES) methods

KR-KS, UV Spectroscopy Electron Spectroscopy

• KS D ISO 11437-2022 Nickel alloys — Determination of lead — Electrothermal atomic absorption spectrometric method
• KS D 1652-2007(2017)(英文版) Iron and steel－Method for spark discharge atomic emission spectrometric analysis
• KS M 1076-2008(2023) Ink in electrotechnical products－Determination of lead and cadmium－Atomic spectrometry
• KS D ISO TS 18223-2018 Nickel alloys — Determination of Nickel content — Inductively coupled plasma atomic emission spectrometric method
• KS D ISO 22033-2021 Nickel alloys — Determination of niobium — Inductively coupled plasma/atomic emission spectrometric method
• KS M 1081-2008(2023) Ceramic fuse in electrotechnical products－Determination of lead and cadmium－Atomic spectrometry

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, UV Spectroscopy Electron Spectroscopy

• GB/T 34209-2017 Stainless steel—Determination of multi-element contents—Glow discharge optical emission spectrometry
• GB/T 33352-2016 General rules of screening application of restricted substances in electrical and electronic products—X-Ray fluorescence spectrometry
• GB/T 34333-2017 Refractory products—Determination by inductively coupled plasma atomic emission spectrometry(ICP-AES)
• GB/T 34208-2017 Iron and steel—Determination of antimony and tin content—Inductively coupled plasma atomic emission spectrometric method

Standard Association of Australia （SAA）, UV Spectroscopy Electron Spectroscopy

• AS ISO 15472:2006 Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales
• AS ISO 19318:2006 Surface chemical analysis - X-ray photoelectron spectroscopy - Reporting of methods used for charge control and charge correction
• AS ISO 19319:2006 Surface chemical analysis - Augur electron spectroscopy and X-ray photoelectron spectroscopy - Determination of lateral resolution, analysis area and sample area viewed by the analyser
• AS ISO 15470:2006 Surface chemical analysis - X-ray photoelectron spectroscopy - Description of selected instrumental performance parameters
• AS ISO 18118:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
• AS ISO 24237:2006 Surface chemical analysis - X-ray photoelectron spectroscopy - Repeatability and constancy of intensity scale
• AS 3641.2:1999 Recommended practice for atomic emission spectrometric analysis - Inductively coupled plasma excitation

Professional Standard - Aviation, UV Spectroscopy Electron Spectroscopy

• HB 6731.11-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 10:Determination of copper,magnesium,zink,cadmium,iron,manganese,boron,titanium, zirconium,nickel,chrome content by inductivel coupled plasma atomic spectrometric method
• HB 6731.12-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 10:Determination of silicon content by inductivel coupled plasma atomic spectrometric method
• HB 7716.17-2022 Spectral analysis method of chemical composition of titanium alloys Part 17: Determination of boron content by inductively coupled plasma atomic emission spectrometry
• HB 7716.18-2022 Spectrometric analysis of titanium alloys – Part 18：Determination of lithium, lead content –Inductively coupled plasma atomic emission spectrometric method
• HB 7716.16-2022 Spectrometric analysis of titanium alloys – Part 16：Determination of platinum, palladium content –Inductively coupled plasma atomic emission spectrometric method
• HB 7716.14-2002 Spectrometric analysis of titanium alloys Part 14:Determination of yttrium content-Inductively coupled plasma atomic emission spectrometric method
• HB 7716.15-2022 Spectrometric analysis of titanium alloys – Part 15：Determination of tungsten, niobium, tantalum, nickel content –Inductively coupled plasma atomic emission spectrometric method
• HB 7716.13-2002 Spectrometric analysis of titanium alloys Part 13:Determination of aluminum,chromium,copper,molybdenum,manganese,neodymium,tin,vanadium,zirconium content-Inductively coupled plasma atomic emission spectrometric method

Professional Standard - Petroleum, UV Spectroscopy Electron Spectroscopy

• SY/T 6009.9-2003 Test method of samples of geochemical exploration for oil and gas Part 9:Determination of the gross amount of aromatic hydrocarbons and their ramifications Ultraviolet spectroscopy

Professional Standard - Ferrous Metallurgy, UV Spectroscopy Electron Spectroscopy

• YB/T 4475-2015 Steel sheets and strips.Analysis of zinc-and aluminium-based metallic coatings.Glow-discharge optical-emission spectrometric method
• YB/T 4395-2014 Steel.Determination of molybdenum, niobium and tungsten contents.Inductively coupled plasma atomic emission spectrometric method
• YB/T 4462-2015 High purity ferrosilicon.Determination of boron content.Inductively coupled plasma atomic emission spectrometric method

Sichuan Provincial Standard of the People's Republic of China, UV Spectroscopy Electron Spectroscopy

• DB51/T 1046-2010 Determination of Aluminum in Food by Inductively Coupled Plasma-Atomic Emission Spectrometry
• DB51/T 1520-2012 Determination of Total Chromium in Soil by Inductively Coupled Plasma Emission Spectrometry
• DB51/T 1031-2010 Determination method of rare earth in tea - Inductively coupled plasma atomic emission spectrometry

CZ-CSN, UV Spectroscopy Electron Spectroscopy

• CSN 35 6535-1983 Electronic measuring instruments. Succesive process spectra analyzers. Nomenclature of pnrameters

Professional Standard - Military and Civilian Products, UV Spectroscopy Electron Spectroscopy

• WJ 2299-1995 Inductively Coupled Plasma Sequential Scanning Spectrometer Verification Regulations

Qinghai Provincial Standard of the People's Republic of China, UV Spectroscopy Electron Spectroscopy

• DB63/T 1421-2015 Determination of Potassium, Sodium, Calcium, Magnesium and Sulfur in Carnallite by Inductively Coupled Plasma Emission Spectrometry

ZA-SANS, UV Spectroscopy Electron Spectroscopy

• SANS 11885:1996 Water quality - Determination of 33 elements by inductively coupled plasma atomic emission spectroscopy

Yunnan Provincial Standard of the People's Republic of China, UV Spectroscopy Electron Spectroscopy

• DB53/T 897-2018 Determination of germanium content in coal by inductively coupled plasma atomic emission spectrometry
• DB53/T 421-2012 Determination of boron in industrial silicon by inductively coupled plasma atomic emission spectrometry

Guizhou Provincial Standard of the People's Republic of China, UV Spectroscopy Electron Spectroscopy

• DB52/T 1073-2015 Determination of Phosphorus in Phosphoric Acid by Inductively Coupled Plasma Emission Spectrometry

Jilin Provincial Standard of the People's Republic of China, UV Spectroscopy Electron Spectroscopy

• DB22/T 2463-2016 Determination of cadmium, lead and chromium in feed by inductively coupled plasma spectrometry

Professional Standard - Light Industry, UV Spectroscopy Electron Spectroscopy

• QB/T 4711-2014 Determination of inorganic elements in Chinese rice wine.Inductive coupled plasma mass spectrometry and inductive coupled plasma atomic emission spectrometry
• QB/T 4851-2015 Determination of inorganic elements in wine.Inductive coupled plasma mass spectrometry and inductive coupled plasma atomic emission spectrometry

Anhui Provincial Standard of the People's Republic of China, UV Spectroscopy Electron Spectroscopy

• DB34/T 3691-2020 Determination of hexavalent chromium in coal ash by inductively coupled plasma atomic emission spectrometry

Guangxi Provincial Standard of the People's Republic of China, UV Spectroscopy Electron Spectroscopy

• DB45/T 2108-2019 Determination of Gallium Content in Target Materials for Copper Indium Gallium Selenium Solar Photovoltaic Cells by Inductively Coupled Plasma Atomic Emission Spectrometry

Jiangxi Provincial Standard of the People's Republic of China, UV Spectroscopy Electron Spectroscopy

• DB36/T 1632-2022 Determination of Soil Available Boron by Inductively Coupled Plasma Emission Spectrometry

Shanxi Provincial Standard of the People's Republic of China, UV Spectroscopy Electron Spectroscopy

• DB14/T 915-2014 Determination of Copper and Zinc in Soil by Inductively Coupled Plasma Emission Spectrometry
• DB14/T 914-2014 Determination of Lead and Chromium in Soil by Inductively Coupled Plasma Emission Spectrometry

Hebei Provincial Standard of the People's Republic of China, UV Spectroscopy Electron Spectroscopy

• DB13/T 2856-2018 Determination of iron ore potassium and sodium content by inductively coupled plasma atomic emission spectrometry

Henan Provincial Standard of the People's Republic of China, UV Spectroscopy Electron Spectroscopy

• DB41/T 1189-2016 Analysis of Chemical Composition of Polymetallic Minerals by Inductively Coupled Plasma-Atomic Emission Spectrometry

Guangdong Provincial Standard of the People's Republic of China, UV Spectroscopy Electron Spectroscopy

• DB44/T 1935-2016 Determination of Trace Elements in Hair by Inductively Coupled Plasma-Atomic Emission Spectrometry

Others:   electron spectrum, Electron-Electron Resonance Spectroscopy, Spectroelectronics, Infrared Spectroscopy Electron Spectroscopy, UV Spectroscopic Analysis, UV Spectrum Spectral Characteristics, UV electron spectroscopy, UV Spectrum Absorption Spectrum, Ultraviolet Spectroscopy Electron Absorption Spectroscopy, Electron Absorption Spectroscopy UV, Electron Absorption Spectroscopy and UV Spectroscopy, UV Absorption Spectroscopy Electronics, Electron UV Spectroscopy, Spectroelectronics, Infrared Spectroscopy UV Spectroscopy, UV Absorption Spectrum Spectrum, UV Spectroscopy Electron Spectroscopy, Fluorescence Spectroscopy UV Spectroscopy, UV electron spectroscopy, UV Spectroscopy Electronics.