ZH
RU
ES

Absolute detection limit

Absolute detection limit, Total:498 items.

In the international standard classification, Absolute detection limit involves: Insulating fluids, Non-destructive testing, Vibrations, shock and vibration measurements, Shafts and couplings, Measurement of volume, mass, density, viscosity, Screw threads, Linear and angular measurements, Company organization and management, Road engineering, Waxes, bituminous materials and other petroleum products, Electricity. Magnetism. Electrical and magnetic measurements, Insulation, Power transmission and distribution networks, Nuclear energy engineering, Radiation measurements, Ventilators. Fans. Air-conditioners, Ceramics, Installations in buildings, Explosion protection, Fertilizers, Optics and optical measurements, Protection against fire, Quality, Wood, sawlogs and sawn timber, Biology. Botany. Zoology, Soil quality. Pedology, Earthworks. Excavations. Foundation construction. Underground works, Sensory analysis, Fruits. Vegetables, Measurement of force, weight and pressure, Fibre optic communications, Products of the chemical industry, Metalliferous minerals, Power stations in general, Protection of and in buildings, Road vehicle systems, Electrical and electronic testing, Electrical equipment for working in special conditions, Heat recovery. Thermal insulation, Testing of metals, Refractories, Air quality, Insulating materials, Test conditions and procedures in general, Electrical engineering in general, Occupational safety. Industrial hygiene, Pesticides and other agrochemicals, Organic chemicals, Environmental protection, Electromagnetic compatibility (EMC), Metrology and measurement in general, Lubricants, industrial oils and related products, Paints and varnishes, Microbiology, Petroleum products in general, Products of the textile industry, Cinematography, Welding, brazing and soldering, Electronic display devices, Electronic components in general, Rotating machinery, Fuels, Pipeline components and pipelines, Clothes, Mechanical testing, Fasteners, Capacitors, Farming and forestry, Paper and board, Integrated circuits. Microelectronics, Optoelectronics. Laser equipment, Medical sciences and health care facilities in general, Audio, video and audiovisual engineering, Mobile services, Road vehicles in general, Diagnostic, maintenance and test equipment, Fluid storage devices, Civil engineering in general, Measurement of fluid flow, Food products in general, Rectifiers. Convertors. Stabilized power supply, Internal combustion engines, Footwear, Construction materials, Vibration and shock with respect to human beings, Lifting equipment, Non-ferrous metals.


German Institute for Standardization, Absolute detection limit

  • DIN 51353:1985 Testing of insulating oils; detection of corrosive sulfur; silber strip test
  • DIN ISO 10817-1:1999 Rotating shaft vibration measuring systems - Part 1: Relative and absolute sensing of radial vibration (ISO 10817-1:1998)
  • DIN 25436:1980 Integral leakage rate test of containment with the absolute pressure method
  • DIN 32645:2008-11 Chemical analysis - Decision limit, detection limit and determination limit under repeatability conditions - Terms, methods, evaluation
  • DIN 10954:1997 Sensory testing methods - Paired comparison test
  • DIN 25482-3:1993 Limit of detection and limit of decision for nuclear radiation measurements; measurement by use of linear analog ratemeters
  • DIN 52616:1977 Testing of thermal insulation materials; determination of thermal conductivity by means of a heat-flow meter
  • DIN 51353:2021-06 Testing of insulating oils - Detection of corrosive sulfur - Silver strip test
  • DIN 52613:1977 Thermal Insulation Testings; Determination of Thermal Conductivity by the Tube Method
  • DIN ISO 11929 Beiblatt 1:2014-08 Determination of the characteristic limits (decision threshold, detection limit and limits of the confidence interval) for measurements of ionizing radiation - Fundamentals and application; Supplement 1: Examples
  • DIN EN 60666:2011-03 Detection and determination of specified additives in mineral insulating oils (IEC 60666:2010); German version EN 60666:2010
  • DIN ISO 10817-1:1999-11 Rotating shaft vibration measuring systems - Part 1: Relative and absolute sensing of radial vibration (ISO 10817-1:1998)
  • DIN 58959-13:1997 Quality management in medical microbiology - Part 13: Criteria for determination of active substance breakpoint for control strains used in susceptibility testing
  • DIN EN 60216-5:2009 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material (IEC 60216-5:2008); German version EN 60216-5:2008
  • DIN 24163-3:1985 Fans; performance testing of small fans using standardized test airways
  • DIN 51353:2021 Testing of insulating oils - Detection of corrosive sulfur - Silver strip test
  • DIN EN ISO 17643:2015-12 Non-destructive testing of welds - Eddy current examination of welds by complex plane analysis (ISO 17643:2015); German version EN ISO 17643:2015
  • DIN 25482-6:1993 Limit of detection and limit of decision for nuclear radiation measurements; counting measurements with allowance for the influence of sample treatment and equipment used
  • DIN 51762:1974 Testing of Liquid Fuels; Determination of Reaction to Sulphuric Acid
  • DIN 55437-2:1992 Testing of board; testing of creasings; determination of creasing range by visual assessment of creasings
  • DIN 25482-5:1993 Limit of detection and limit of decision for nuclear radiation measurements; counting measurements by high resolution gamma spectrometry, neglecting the influence of sample treatment
  • DIN ISO 11843-4:2006 Capability of detection - Part 4: Methodology for comparing the minimum detectable value with a given value (ISO 11843-4:2003; text in German, English)
  • DIN 25482-12:2003 Detection limit and decision threshold for ionizing radiation measurements - Part 12: Unfolding of spectra
  • DIN 52187:1979 Testing of wood; determination of ultimate shearing stress parallel to grain
  • DIN 51733:2016-04 Testing of solid mineral fuels - Ultimate analysis and calculation of oxygen content
  • DIN EN ISO 20601:2019-04 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology for thin-walled steel components (ISO 20601:2018); German version EN ISO 20601:2018
  • DIN 10120:2001 Analysis of foodstiffs - Detection of Salmonella with impedance-method

British Standards Institution (BSI), Absolute detection limit

  • BS 5984:1980 Method for detection and determination of specified anti-oxidant additives in insulating oils
  • BS ISO 10817-1:1999 Rotating shaft vibration measuring systems - Relative and absolute sensing of radial vibration
  • BS EN 60216-5:2008 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material
  • BS EN 60216-5:2003 Electrical insulating materials - Thermal endurance properties - Determination of relative thermal endurance index (RTE) of an insulating material
  • BS 4140-8:1986 Methods of test for aluminium oxide. Determination of absolute density using a pyknometer
  • BS EN ISO 11929-2:2021 Determination of the characteristics limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation. Fundamentals and application - Advanced applications
  • BS ISO 11843-4:2003 Capability of detection - Methodology for comparing the minimum detectable value with a given value
  • BS EN ISO 11929-1:2021 Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation. Fundamentals and application - Elementary applications
  • BS ISO 12828-1:2011 Validation method for fire gas analysis. Limits of detection and quantification
  • BS EN 60216-6:2006 Electrical insulating materials - Thermal endurance properties - Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method
  • 19/30371154 DC BS ISO 11929-4. Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation. Part 4. Guidelines to applications
  • BS EN IEC 60216-5:2022 Tracked Changes. Electrical insulating materials. Thermal endurance properties. Determination of relative temperature index (RTI) of an insulating material
  • BS EN 60811-502:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Shrinkage test for insulations
  • BS ISO 11929-4:2022 Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application - Part 4: Guidelines to applications
  • BS EN ISO 11929-3:2021 Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation. Fundamentals and application - Applications to unfolding methods
  • DD CEN/TS 15053:2005 Non-destructive testing - Recommendations for discontinuities-types in test specimens for examination
  • BS 6002-1:2007 Sampling procedures for inspection by variables - Guide to single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
  • BS EN ISO 10893-11:2011+A1:2020 Non-destructive testing of steel tubes - Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections
  • BS DD CEN ISO/TS 14253-4:2010 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Background on functional limits and specification limits in decision rules
  • BS 4522:1988 Method for determination of absolute density at 20 °C of liquid chemical products for industrial use
  • BS EN 62535:2009 Insulating liquids - Test method for detection of potentially corrosive sulphur in used and unused insulating oil

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Absolute detection limit

  • GB/T 30820-2014 Non-destructive testing.Practice for determining the impedance of absolute eddy-current probes
  • GB/T 21487.1-2008 Rotating shaft vibration measuring systems.Part 1:Relative and absolute sensing of radial vibration
  • GB/T 32080-2015 Non-destructive testing.Qualification of personnel for limited application of non-destructive testing
  • GB/T 26184-2010 The measurement of absolute luminous intensity distributions
  • GB/T 41799-2022 Assay method of restriction endonuclease impurity
  • GB/T 21242-2007 Methods of qualitative determination of prohibitive and limitaive reagent of fireworks and firecrackers
  • GB/T 15830-2008 Non-destructive testing.Practice for ultrasonic testing of circumferential butt welds in steel pipes and tubes
  • GB/Z 21274-2007 Determination of regulated substances(lead,mercury and cadmium)in electrical and electronic equipment
  • GB/Z 21275-2007 Determination of regulated substance(hexavalent chromium)in electrical and electronic equipment
  • GB/T 19293-2003 Method of X-ray radioscopy for butt-weld
  • GB/T 23635-2009 Writing rules for detection and identification of regulated pests
  • GB 8058-2003 Standard permissible limits and testing method for release of lead or cadmium from ceramic cookware
  • GB/T 11798.6-2001 Motor vehicle safety testing equipment Technical requirements of verification--Part 6: Technical requirements of verification for symmetrical beam headlamp tester
  • GB/T 12605-2008 Non-destructive testing.Test methods for radiographic testing of circumferential fusion-welded butt joints in metallic pipes and tubes
  • GB 17925-1999 Standard practice for X-ray real-time examination of cylinders weld
  • GB/T 5518-2008 Inspection of grain and oil.Determination of relatively density of grain and oilseeds
  • GB/T 17925-2011 Standard practice for X-ray digital radioscopic examination of cylinder weld
  • GB/T 6378.1-2008 Sampling procedures for inspection by variables.Part1:Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL

National Metrological Verification Regulations of the People's Republic of China, Absolute detection limit

Association Francaise de Normalisation, Absolute detection limit

  • NF E03-153:1975 Checking of threads with limit gauges-threaded gauges for nuts.
  • NF C46-302:1983 Industrial-Process Measurement and Control Acceptance tests for absolute pressure,relative pressure,and differential pressure transmitters
  • NF E03-612:2007 Asymmetrical trapezoidal screw thread, artillery type, 3 o - 45 o - Checking by limit gauges.
  • NF E03-612:1982 Asymmetrical trapezoidal screw thread, artillery type, 3 degrees- 45 degrees. Checking by limit gauges.
  • UTE C46-302U*UTE C46-302:1983 Industrial-process measurement and control. Acceptance tests for absolute pressure, relative pressure, and differential pressure transmitters.
  • NF E48-679:1990 Transmissions hydrauliques - Éléments filtrants - Détermination du pouvoir d'arrêt absolu.
  • NF C26-305*NF EN 60216-5:2008 Electrical insulating materials - Thermal endurance properties - Part 5 : determination of relative thermal endurance index (RTE) of an insulating material
  • NF EN IEC 60216-5:2022 Matériaux isolants électriques - Propriétés d'endurance thermique - Partie 5 : détermination de l'indice de température relatif (ITR) d'un matériau isolant
  • NF EN 60343:1993 Méthodes d'essai recommandées pour la détermination de la résistance relative des matériaux isolants au claquage par les décharges superficielles
  • NF C26-305:2003 Electrical insulating materials - Thermal endurance properties - Part 5 : determination of relative thermal endurance index (RTE) of an insulating material.
  • NF L41-123:1986 Contamination in aircraft hydraulic circuits - Filters - Absolute filtration rating measurement
  • NF T20-220:1973 Aluminium oxide primarily used for the production of aluminium. Determination of absolute density. Pyknometer method.
  • NF M60-200-2*NF EN ISO 11929-2:2021 Determination of the characteristics limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation - Fundamentals and application - Part 2 : advanced applications
  • NF M60-200-1*NF EN ISO 11929-1:2021 Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation - Fundamentals and application - Part 1 : elementary applications
  • NF ISO 11929-4:2022 Détermination des limites caractéristiques (seuil de décision, limite de détection et limites de l'intervalle élargi) pour le mesurage des rayonnements ionisants - Principes fondamentaux et applications - Partie 4 : lignes directrices relatives a...
  • NF E03-164:1986 Pipe threads. Checking of parallel pipe threads with limit gauges. Plain gauges for external and internal screw threads.
  • NF C27-227:1981 Detection and determination of specified anti-oxidant additives in insulating oils.
  • NF EN 60666:2010 Détection et dosage d'additifs spécifiques présents dans les huiles minérales isolantes
  • NF M60-200-3*NF EN ISO 11929-3:2021 Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation - Fundamentals and application - Part 3 : applications to unfolding methods
  • NF EN ISO 18753:2017 Céramiques techniques - Détermination de la masse volumique absolue des poudres céramiques à l'aide d'un pycnomètre
  • NF C26-290-2*NF EN 60544-2:2013 Electrical insulating materials - Determination of the effects of ionizing radiation on insulating materials - Part 2 : procedures for irradiation and test
  • NF EN 60544-2:2013 Matériaux isolants électriques - Détermination des effets des rayonnements ionisants sur les matériaux isolants - Partie 2 : méthodes d'irradiation et d'essai
  • NF C27-227*NF EN 60666:2010 Detection and determination of specified additives in mineral insulating oils
  • NF C27-603*NF EN 62535:2009 Insulating Liquids - Test method for detection of potentially corrosive sulphur in used and unused insulating oil.

European Committee for Standardization (CEN), Absolute detection limit

  • EN ISO/TR 13115:2011 Non-destructive testing - Methods for absolute calibration of acoustic emission transducers by the reciprocity technique
  • CEN ISO/TR 13115:2011 Non-destructive testing - Methods for absolute calibration of acoustic emission transducers by the reciprocity technique
  • prENV 28041-1992 Human response to vibration; measuring instruments (ISO 8041:1990)
  • EN 60216-5:2003 Electrical insulating materials — Thermal endurance properties — Part 5: Determination of relative thermal endurance index (RTE) of an insulating material
  • EN ISO 11929-3:2021 Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation - Fundamentals and application - Part 3: Applications to unfolding methods (ISO 11929-3:2019)
  • EN ISO 17405:2022 Non-destructive testing - Ultrasonic testing - Technique of testing claddings produced by welding, rolling and explosion (ISO 17405:2022)
  • prEN ISO 11929-4 Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation - Fundamentals and application - Part 4: Guidelines to applications (ISO 11929-4:2022)

未注明发布机构, Absolute detection limit

  • BS PD CEN ISO/TR 13115:2011 Non - destructive testing — Methods for absolute calibration of acoustic emission transducers by the reciprocity technique
  • DIN EN 1712:2002 Non-destructive testing of welded joints – Ultrasonic testing of welded joints – Acceptability limits
  • BS ISO 10817-1:1998(2000) Rotating shaft vibration measuring systems — Part 1 : Relative and absolute sensing of radial vibration
  • BS ISO 11929-4:2020 Determination ofthe characteristic limits (decision threshold, detection limit and limits ofthe coverage interval) for measurements ofionizing radiation — Fundamentals and application Part 4 : Guidelines to applications
  • BS EN 62535:2009(2011) Insulating liquids — Test method for detection of potentially corrosive sulphur in used and unused insulating oil
  • DIN EN ISO 10675-1:2022 Non-destructive testing of welded joints – Admissibility limits for radiographic testing – Part 1: Steel, nickel, titanium and their alloys

International Organization for Standardization (ISO), Absolute detection limit

  • ISO 10817-1:1998 Rotating shaft vibration measuring systems - Part 1: Relative and absolute sensing of radial vibration
  • ISO/TR 13115:2011 Non-destructive testing - Methods for absolute calibration of acoustic emission transducers by the reciprocity technique
  • ISO/TS 17892-12:2004 Geotechnical investigation and testing - Laboratory testing of soil - Part 12: Determination of Atterberg limits
  • ISO 11929-4:2020 Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application — Part 4: Gui
  • ISO 11929-1:2019 Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application — Part 1: Ele
  • ISO 5662:1978 Petroleum products; Electrical insulating oils; Detection of corrosive sulphur
  • ISO 11929-4:2022 Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application — Part 4: Gui
  • ISO 5662:1997 Petroleum products - Electrical insulating oils - Detection of corrosive sulfur
  • ISO 10051:1996 Thermal insulation - Moisture effects on heat transfer - Determination of thermal transmissivity of a moist material
  • ISO 11929-3:2019 Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application — Part 3: App
  • ISO 11843-4:2003 Capability of detection - Part 4: Methodology for comparing the minimum detectable value with a given value
  • ISO/TS 17892-12:2004/Cor 1:2006 Geotechnical investigation and testing - Laboratory testing of soil - Part 12: Determination of Atterberg limits
  • ISO 8041:2005/cor 1:2007 Human response to vibration - Measuring instrumentation; Technical Corrigendum 1

Standard Association of Australia （SAA）, Absolute detection limit

  • AS 4635:2004 Non-destructive testing - Qualification of personnel for limited applications of non-destructive testing
  • AS ISO 20807:2020 Non-destructive testing — Qualification of personnel for limited application of non-destructive testing
  • AS 1767.2.4:1999 Insulating liquids - Test methods - Detection and determination of specified anti-oxidant additives in insulating oils
  • AS ISO 17643:2020 Non-destructive testing of welds — Eddy current testing of welds by complex-plane analysis

ACI - American Concrete Institute, Absolute detection limit

UY-UNIT, Absolute detection limit

Professional Standard - Traffic, Absolute detection limit

Danish Standards Foundation, Absolute detection limit

  • DS/CEN ISO/TR 13115:2012 Non-destructive testing - Methods for absolute calibration of acoustic emission transducers by the reciprocity technique
  • DS/ISO 12828-1:2012 Validation method for fire gas analysis - Part 1: Limits of detection and quantification
  • DS/EN 60666:2011 Detection and determination of specified additives in mineral insulating oils
  • DS/ISO 20632:2008 Reaction-to-fire tests - Small room test for pipe insulation products or systems
  • DS/EN 60216-5:2008 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material
  • DS/EN 1711/A1:2004 Non-destructive examination of welds - Eddy current examination of welds by complex plane analysis
  • DS/EN 1711:2002 Non-destructive examination of welds - Eddy current examination of welds by complex plane analysis
  • DS/CEN/TS 15053:2005 Non-destructive testing - Recommendations for discontinuities-types in test specimens for examination
  • DS/EN 60544-2:2012 Electrical insulating materials - Determination of the effects of ionizing radiation on insulating materials - Part 2: Procedures for irradiation and test
  • DS/EN ISO 11929-2:2021 Determination of the characteristics limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation – Fundamentals and application – Part 2: Advanced applications (ISO 11929-2:2019)
  • DS/EN ISO 11929-1:2021 Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation – Fundamentals and application – Part 1: Elementary applications (ISO 11929-1:2019)

YU-JUS, Absolute detection limit

  • JUS B.H8.620-1980 Testing of bitumen. Absolute viscosity
  • JUS D.A1.053-1979 Test ofwood. Determination ofultimate shearing stress parallel
  • JUS H.G8.012-1980 Reagents. Hydrochloric acid. Determirmtion ofabsolute demity. Hydrometer method
  • JUS C.X5.032-1990 MagnetIc materials. Hethods of test. Insulation resistance measurement
  • JUS C.K5.032-1980 Magnetic sheets. Methods of test. Insulation resistance measurement
  • JUS B.H8.232-1991 Electrical insulating oils - Method for the detection of corrosive sulphur
  • JUS D.A1.048-1979 Testing ofwood. Determination ofultimate tensile stress parallel to grain
  • JUS D.A1.046-1979 Testing ofwood. Determination ofuttimate strength in static bending
  • JUS H.B8.015-1981 Sulphuric acid for industrial u se. Determination ofabsolute density. Hydrometer method
  • JUS C.T3.056-1991 Fusion welded butt joints in steel. Transverse tensile test
  • JUS F.A1.012-1981 Textile. Resistance to the action of water and its testing
  • JUS H.B8.478-1989 Acetone for industrial use. Control test with Agulhon's reagent
  • JUS C.T3.054-1984 Fusion welded buttjoints in steel — Transversa sida bend test
  • JUS N.F1.200-1994 Thermal-mechanical performance test and mechanical performance test on string insulator units
  • JUS H.Z8.056-1984 Testing of engine antifreezes. Determination of corrosion in glass apparatus
  • JUS F.A1.019-1981 Textile. Resistance to the action of oil and its testing

Korean Agency for Technology and Standards (KATS), Absolute detection limit

  • KS M 2247-2005 Testing method of test for absolute viscosity of asphalts
  • KS B ISO 20807-2005(2015) Non-destructive testing－Qualification of personnel for limited application of non-destructive testing
  • KS A ISO 11929:2014 Determination of the characteristic limits(decision threshold, detection limit and limits of the confidence interval) for measurements of ionizing radiation — Fundamentals and application
  • KS B ISO 20807:2021 Non-destructive testing — Qualification of personnel for limited applications of non-destructive testing
  • KS C 3802-1977 Permissible limits of visual defects for insulating porcelains
  • KS C 3802-1985 Permissible limits of visual defects for insulating porcelains
  • KS M 2109-2020 Test method for rust preventive oils
  • KS W 0913-2004(2009) Radiographic inspection for aerospace quality materials
  • KS W 0913-1987 Radiographic inspection for aerospace quality materials
  • KS C IEC 60544-2:2019 Electrical insulating materials — Determination of the effects of ionizing radiation on insulating materials — Part 2: Procedures for irradiation and test
  • KS C IEC 60216-5-2014(2019) Electrical insulating materials — Thermal endurance properties — Part 5：Determination of relative thermal endurance index(RTE) of an insulating material
  • KS H 2129-1978(1991) TESTING METHODS FOR CHESTNUT, CANNED
  • KS A ISO 11929-2014(2019) Determination of the characteristic limits(decision threshold, detection limit and limits of the confidence interval) for measurements of ionizing radiation — Fundamentals and application
  • KS B ISO 10817-1:2001 Rotating shaft vibration measuring systems-Part 1:Relative and absolute sensing of radial vibration
  • KS B ISO 10817-1_2001:2001 Rotating shaft vibration measuring systems-Part 1:Relative and absolute sensing of radial vibration
  • KS B ISO 10817-1_2001:2016 Rotating shaft vibration measuring systems－Part 1：Relative and absolute sensing of radial vibration
  • KS C 2007-2004 Testing methods for thermosetting plastic insulating materials
  • KS C 2007-2014 Testing methods for resistance of thermosetting plastic insulating materials
  • KS C IEC 60216-5:2014 Electrical insulating materials — Thermal endurance properties — Part 5：Determination of relative thermal endurance index(RTE) of an insulating material
  • KS B ISO 10817-1_2001:2021 Rotating shaft vibration measuring systems —Part 1: Relative and absolute sensing of radial vibration
  • KS M ISO 5662:2003 Petroleum products-Electrical insulating oils-Detection of corrosive sulfur
  • KS M ISO 5662-2003(2008) Petroleum products－Electrical insulating oils－Detection of corrosive sulfur
  • KS M ISO 5662:2013 Petroleum products-Electrical insulating oils-Detection of corrosive sulfur
  • KS A ISO 22234:2011 Cinematography－Relative and absolute sound pressure levels for motion-picture multi-channel sound systems－Measurement methods and levels
  • KS L ISO 10051:2006 Thermal insulation－Moisture effects on heat transfer－Determination of thermal transmissivity of a moist material
  • KS M ISO 10051:2012 Thermal insulation－Moisture effects on heat transfer－Determination of thermal transmissivity of a moist material
  • KS Q ISO 11843-4:2009 Capability of detection－Part 4：Methodology for comparing the minimum detectable value with a given value
  • KS C 2127-1996(2016) Testing method for proof-voltage testing of thin solid electrical insulating materials
  • KS C IEC 62535-2014(2019) Insulating liquids — Test method for detection of potentially corrosive sulphur in used and unused insulating oil
  • KS M ISO 901:2003 Aluminium oxide primarily used for the production of aluminium－Determination of absolute density－Pyknometer method
  • KS C CISPR 24-2004 Information technology equipment-Immunity characteristics- Limits and methods of measurement
  • KS D 0232-2021 Eddy current testing for steel products by using encircling coil
  • KS M ISO 901-2003(2018)
  • KS C IEC 62535:2014 Insulating liquids — Test method for detection of potentially corrosive sulphur in used and unused insulating oil
  • KS A ISO 22234-2011(2016) Cinematography－Relative and absolute sound pressure levels for motion-picture multi-channel sound systems－Measurement methods and levels
  • KS A ISO 22234-2011(2021) Cinematography－Relative and absolute sound pressure levels for motion-picture multi-channel sound systems－Measurement methods and levels
  • KS D 1928-2003(2018) Detection of Hexavalent Chromium on Zinc and Zinc/Aluminum alloy coated Steel

Japanese Industrial Standards Committee (JISC), Absolute detection limit

  • JIS C 1302:2002 Insulation resistance testers
  • JIS C 1302:2014 Insulation resistance testers
  • JIS C 1302:2018 Insulation resistance testers
  • JIS L 0875:1995 Test method for colour fastness to potting
  • JIS Z 3080:1995 Methods of ultrasonic angle beam examination for butt welds of aluminium plates
  • JIS R 1697:2015 Absolute measurement of internal quantum efficiency of phosphors for white light emitting diodes using an integrating sphere
  • JIS Z 8462-4:2006 Capability of detection -- Part 4: Methodology for comparing the minimum detectable value with a given value

HU-MSZT, Absolute detection limit

European Committee for Electrotechnical Standardization（CENELEC）, Absolute detection limit

  • HD 568 S1-1990 Methods of Test for the Determination of the Insulation Resistance of Solid Insulating Materials
  • EN 60666:2010 Detection and determination of specified additives in mineral insulating oils
  • EN IEC 60216-5:2022 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative temperature index (RTI) of an insulating material
  • EN 60216-5:2008 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material

工业和信息化部, Absolute detection limit

  • JB/T 13469-2018 Nondestructive testing eddy current testing comparison test block
  • YS/T 1309-2019 Testing method for insulation properties of titanium and titanium alloy coatings
  • JC/T 2528-2019 Method for determination of absolute density of fine ceramic powder: Pycnometer method

ZA-SANS, Absolute detection limit

  • SANS 20807:2004 Non-destructive testing - Qualification of personnel for limited applications of non-destructive testing
  • SANS 11843-4:2009 Capability of detection Part 4: Methodology for comparing the minimum detectable value with a given value
  • SANS 11629:2007 Cranes - Measurement of the mass of a crane and its components

CU-NC, Absolute detection limit

  • NC 82-05-5-1984 Wines. Testing Methods. Determination of Relatiy and Absolute Density

International Commission on Illumination (CIE), Absolute detection limit

  • CIE 70-1987 Measurement of Absolute Luminous Intensity Distributions (E)
  • CIE 44-1979 Absolute Methods for Reflection Measurement (1st Edition) (Reprint 1990) (E)
  • CIE 65-1985 Electrically Calibrated Thermal Detectors of Optical Radiation: (Absolute Radiometers) (E)

Professional Standard - Machinery, Absolute detection limit

  • JB/T 8689-1998 Fan vibration detection and its limied value
  • JB/T 8689-2014 Fan vibration detection and its limited value
  • JB/T 9213-1999 Non destructive testing.Penetrant testing.A type comparator block
  • JB/T 14292-2022 Limits and detection methods of toxic and harmful substances in agricultural water pumps

国家密码管理局, Absolute detection limit

  • GM/T 0064-2018 Restricted Domain Communication (RCC) password detection requirements

CZ-CSN, Absolute detection limit

  • CSN 72 1089-1979 Determination of absolute whiteness of ceramic raw materials
  • CSN 34 6468-1990 Test methods of solid insulating materials. Method for determining the comparative and the proof tracking indices of solid insulating materials under moist conditions
  • CSN 34 5615 Z2-1995

US-CFR-file, Absolute detection limit

  • CFR 7-319.75-2013 Agriculture. Part319:Foreign quarantine notices. Section319.75:Restrictions on importation of restricted articles; disposal of articles refused importation.

Indonesia Standards, Absolute detection limit

  • SNI ISO 20807:2008 Non-destructive testing - Qualification of personnel for limited application of non-destructive testing
  • SNI 03-6835-2002 Tes method of effect of heat and air on a moving film of asphal (rolling thin film oven test)
  • SNI 2848-2008

KR-KS, Absolute detection limit

  • KS B ISO 20807-2021 Non-destructive testing — Qualification of personnel for limited applications of non-destructive testing
  • KS C IEC 60544-2-2019 Electrical insulating materials — Determination of the effects of ionizing radiation on insulating materials — Part 2: Procedures for irradiation and test
  • KS B ISO 10817-1_2001-2016 Rotating shaft vibration measuring systems－Part 1：Relative and absolute sensing of radial vibration
  • KS B ISO 10817-1_2001-2021 Rotating shaft vibration measuring systems —Part 1: Relative and absolute sensing of radial vibration

FI-SFS, Absolute detection limit

BR-ABNT, Absolute detection limit

Group Standards of the People's Republic of China, Absolute detection limit

  • T/CASEI 023-2023 Guideline for lift electrical insulation testing
  • T/CSTM 00821-2022 Metallic reference blocks of ultrasonic testing and eddy current testing for civil aircraft
  • T/FDSA 022-2021 Food inspection and testing-General requirements for interlaboratory comparison
  • T/YNBX 080-2023 Technical specification for detection of banned and restricted pesticides in pesticide products
  • T/CNIA 0018-2019 Operational Specifications for Hot Fire Restricted Safety Inspection in Polysilicon Plants
  • T/ZJBX 02-2019 Group standard for testing the electric wiring insulation resistance of harbour portal crane
  • T/CAMA 74-2022 Guide for the implementation of interlaboratory comparison of agricultural machinery testing parameter
  • T/SCETIA 1001-2021 Specification for inter-laboratory comparison of construction engineering testing
  • T/CSEE 0008-2016 Property detection methods of large-medium electric machinery
  • T/CEEIA 260-2016 Property detection methids of large-medium electric machinery stator winding insulation
  • T/CEC 125-2016 Determination method of total corrosive sulfur content in mineral insulating oil
  • T/CIDA 0014-2022 Specification for field detection of flow comparison by real flow method in open channel
  • T/CSEE 0234-2021 Specification for steep wave front impact test of pot insulators for gas insulated metal-enclosed switchgear
  • T/ZJSEE 0015-2023 Guidance for composite insulators infrared test in overhead lines with unmanned aerial vehicles

American Society for Testing and Materials (ASTM), Absolute detection limit

  • ASTM E2677-14 Standard Test Method for Determining Limits of Detection in Explosive Trace Detectors
  • ASTM D2144-07 Standard Practices for Examination of Electrical Insulating Oils by Infrared Absorption
  • ASTM D2144-07(2013) Standard Practices for Examination of Electrical Insulating Oils by Infrared Absorption
  • ASTM E579-84(1998) Standard Test Method for Limit of Detection of Fluorescence of Quinine Sulfate
  • ASTM D6620-00 Standard Practice for Asbestos Detection Limit Based on Counts
  • ASTM D6620-19 Standard Practice for Asbestos Detection Limit Based on Counts
  • ASTM E1629-07 Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes
  • ASTM E1629-12 Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes
  • ASTM E579-04(2023) Standard Test Method for Limit of Detection of Fluorescence of Quinine Sulfate in Solution
  • ASTM D6620-06 Standard Practice for Asbestos Detection Limit Based on Counts
  • ASTM F2420-05 Standard Test Method for Determining Relative Humidity on the Surface of Concrete Floor Slabs Using Relative Humidity Probe Measurement and Insulated Hood
  • ASTM F2420-05(2011) Standard Test Method for Determining Relative Humidity on the Surface of Concrete Floor Slabs Using Relative Humidity Probe Measurement and Insulated Hood

NO-SN, Absolute detection limit

  • NS 1563-1972 ISO system for limits and fits - Inspection limits for indicating measuring instruments

SAE - SAE International, Absolute detection limit

Yunnan Provincial Standard of the People's Republic of China, Absolute detection limit

  • DB53/T 762-2016 Limitation and detection of diethyl diethylethylhexanoate in fertilizer
  • DB53/T 761-2016 Limit and detection of compound sodium nitrophenolate in fertilizer

Professional Standard - Agriculture, Absolute detection limit

Shaanxi Provincial Standard of the People's Republic of China, Absolute detection limit

  • DB61/T 1033-2016 Limits and detection methods of outdoor light pollution
  • DB61/T 1046-2016 Limits and detection methods of exhaust pollutants from in-use vehicles (telemetry method)

TIA - Telecommunications Industry Association, Absolute detection limit

Professional Standard - Electricity, Absolute detection limit

  • DL/T 626-2015 Aging suspension insulators inspection rule
  • DL/T 285-2012 Test method for corrosive sulphur in mineral insulating oils Copper conductor wrapped with insulating paper
  • DL/T 626-2005 Code of aging cap and pin insulators inspection
  • DL/T 2390-2021 Infrared detection method for zero value of disc suspension porcelain insulator
  • DL/T 1787-2017 Calibration specification for relative dielectric loss and capacitance detector
  • DL/T 2159-2020 Technical guidelines for live detection of insulated tubular busbars in substations
  • DL/T 1985-2019 Detection method of mixing ratio of sulfur hexafluoride mixed insulating gas
  • DL/T 2453-2021 Specifications for zero-value high-voltage shock testing of disc-shaped suspension porcelain insulators

VN-TCVN, Absolute detection limit

  • TCVN 4048-2011 Soil quality.Determination of humudity and absolute dryness coefficient

Shanxi Provincial Standard of the People's Republic of China, Absolute detection limit

  • DB1404/T 15-2021 Management Requirements for Inspection and Testing Institutions Opening to the Outside World

RU-GOST R, Absolute detection limit

  • GOST 16483.2-1970 Wood. Method for determination of conventional ultimate strength in local compression perpendicular to grain
  • GOST 8.107-1981 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring absolute pressure within the range of 1·10 in minus 8 degree up to 1·10 in 3 degree Pa
  • GOST 27700-1988 Alumina. Absolute density determination pycnometer method
  • GOST 4071.2-1994 Insulating refractory products. Determination of cold compressive strength
  • GOST 4071.2-2021 Insulating refractory products. Determination of cold compressive strength at room temperature
  • GOST IEC 60666-2014 Mineral insulating oils. Detection and determination of specified additives
  • GOST R IEC 60666-2013 Mineral insulating oils. Detection and determination of specified additives
  • GOST 8.223-1976 State system for ensuring the uniformity of measurements. State special standard and all-union verification for means measuring absolute pressure within the range of 2,7·10 in 2 degree to 4000·10 in 2 degree Pa
  • GOST 16483.11-1972 Wood. Method for determination of conventional ultimate strength in compression perpendicular to grain
  • GOST 16483.12-1972 Wood. Method for determination of ultimate strength in shearing perpendicular to grain
  • GOST 16483.13-1972 Wood. Method for determination of ultimate strength in cutting perpendicular to grain
  • GOST 33254-2015 Insulating oils. Detection of corrosive sulfur. Silver strip test
  • GOST R 55494-2013 Insulating oils. Detection of corrosive sulfur. Silver strip test
  • GOST 33110-2014 Electrical insulating oil. Determination of interfacial tension of oil against water. The ring method
  • GOST R 55413-2013 Insulating mineral oils. Determination of interfacial tension of oil against water by the ring method
  • GOST ISO 10817-1-2002 Vibration. Rotating shaft vibration measuring systems. Part 1. Relative and absolute sensing of radial vibration
  • GOST 24613.8-1983 Optoelectronic integrated microcircuits and optocouples. Methods for measuring of critical change rate of dielectric voltage
  • GOST R ISO 10817-1-1999 Mechanical vibration. Rotating shaft vibration measuring systems. Part 1. Relative and absolute sensing of radial vibration
  • GOST 10345.1-1978 Solid electroinsulating materials. Method for the determination of arc resistance of alternating voltage greater than 1000 V

SE-SIS, Absolute detection limit

  • SIS SS IEC 666:1986 Insulating oils - Detection and determination of specified anti-oxidant additives in insulating oils
  • SIS SS IEC 474:1986 Insula t ing oils — Test method for oxidation stability of inhibited mineral insula ting oils
  • SIS SS 15 51 67-1979 Petroleum products — Electrical insulating oils — Detection of corrosive sulphur
  • SIS SS IEC 343:1982 Recommended test methods for determining the relative resistance of insulating materials to break-down by surface discharges
  • SIS SS IEC 370:1982 Test procedure for thermal endurance of insulating varnishes - Electric strength method

Zhejiang Provincial Standard of the People's Republic of China, Absolute detection limit

  • DB33/ 753-2009 Formaldehyde limit and detection method of bamboo mat products

Guangdong Provincial Standard of the People's Republic of China, Absolute detection limit

  • DB44/T 1356-2014 Testing method for relative density of sand filling
  • DB44/T 1192-2013 Harmonic interference limits and detection methods of charging equipment for electric vehicles

Professional Standard - Post and Telecommunication, Absolute detection limit

  • YD 5012-2003 Insulation Objective to Ground and Testing Method for Optical Cable Link
  • YD 5012-1995 Insulation Objective to Ground and Testing Method for Optical Cable Line

Professional Standard - Petrochemical Industry, Absolute detection limit

  • SH/T 0802-2007 Determination of 2,6-bi-tert-butyl-paracresol in insulating oils

Society of Automotive Engineers (SAE), Absolute detection limit

  • SAE J1325-1994 Test Method for Measuring the Relative Drapeability of Flexible Insulation Materials
  • SAE J1325-1985 TEST METHOD FOR MEASURING THE RELATIVE DRAPEABILITY OF FLEXIBLE INSULATION MATERIALS

Taiwan Provincial Standard of the People's Republic of China, Absolute detection limit

  • CNS 12363-1988 Method of Test for Fiber Optic Devices ( FOTP-95 Optical Fibers and Cable Absolute Optical Power Test)
  • CNS 11401-1995 Method of Ultrasonic Test for Steel Butt Welds

Sichuan Provincial Standard of the People's Republic of China, Absolute detection limit

  • DB51/T 1444-2012 In-use isolated positive pressure oxygen respirator testing and inspection specification

国家市场监督管理总局、中国国家标准化管理委员会, Absolute detection limit

  • GB/T 21242-2019 Fireworks—Test methods of qualitative determination of prohibitive and limitative substances
  • GB/T 36275-2018 Limit and measurement methods of electromagnetic compatibility for private digital mobile radio equipment
  • GB/T 41225-2021 Limit and determination of free phenols in phenoxy carboxylic acid herbicides

Professional Standard - Commodity Inspection, Absolute detection limit

AT-ON, Absolute detection limit

  • OENORM M 9421-2021 Handling of the results of emission measurements below the limit of quantification and detection
  • OENORM EN ISO 11929-1:2021 Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation - Fundamentals and application - Part 1: Elementary applications (ISO 11929-1:2019)
  • OENORM EN ISO 11929-2:2021 Determination of the characteristics limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation - Fundamentals and application - Part 2: Advanced applications (ISO 11929-2:2019)

(U.S.) Telecommunications Industries Association , Absolute detection limit

Henan Provincial Standard of the People's Republic of China, Absolute detection limit

  • DB41/T 1785-2019 Safety code for inspection and testing of confined spaces inside special pressure equipment

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Absolute detection limit

  • ASHRAE 3643-1993 Limiting Solar Radiation Effects on Outdoor Air Temperature Measurement

Professional Standard - Nuclear Industry, Absolute detection limit

  • EJ/T 20150.28-2018 Post-irradiation Inspection of PWR Bundle Fuel Assemblies Part 28: Activity Method for Absolute Burnup Measurement of Fuel Rods
  • EJ/T 20150.27-2018 Post-irradiation inspection of fuel assemblies of pressurized water reactor bundle type - Part 27: Mass spectrometry for absolute burnup measurement of fuel rods

VE-FONDONORMA, Absolute detection limit

CH-SNV, Absolute detection limit

  • VSM 34218.1-1938
  • SNV 24547
  • SNV 81110-1942 Textiles — Tests for colour fastness Section G01: Colour fastness to nitrogen oxides
  • SEV 0178-1957
  • SNV 24740-1937
  • SN 119 800-1990
  • SN EN ISO 11929-2:2021 Determination of the characteristics limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation - Fundamentals and application - Part 2: Advanced applications (ISO 11929-2:2019)
  • SN EN ISO 11929-1:2021 Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation - Fundamentals and application - Part 1: Elementary applications (ISO 11929-1:2019)

AENOR, Absolute detection limit

  • UNE-EN 60666:2011 Detection and determination of specified additives in mineral insulating oils
  • UNE-EN 60343:1996 RECOMMENDED TEST METHOD FOR DETERMINING THE RELATIVE RESISTANCE OF INSULATING MATERIALS TO BREAKDOWN BY SURFACE DISCHARGES.
  • UNE-CEN/TS 15053:2006 IN Non-destructive testing - Recommendations for discontinuities-types in test specimens for examination

Hebei Provincial Standard of the People's Republic of China, Absolute detection limit

  • DB13/ 2323-2016 Limits and detection methods of exhaust pollutants from in-use vehicles (telemetry method)

Tianjin Provincial Standard of the People's Republic of China, Absolute detection limit

  • DB12/T 590-2015 Limits and detection methods of exhaust pollutants from in-use vehicles (telemetry method)

Inner Mongolia Provincial Standard of the People's Republic of China, Absolute detection limit

  • DB15/T 1244-2017 Limits and detection methods of exhaust pollutants from in-use vehicles (telemetry method)

Jiangsu Provincial Standard of the People's Republic of China, Absolute detection limit

  • DB32/T 2288-2013 Limits and detection methods of exhaust pollutants from in-use vehicles (telemetry method)

Anhui Provincial Standard of the People's Republic of China, Absolute detection limit

  • DB34/T 1743-2012 Limits and detection methods of exhaust pollutants from in-use vehicles (telemetry method)
  • DB34/T 1972-2013 P91 Specification for Ultrasonic Testing of Steel Butt Welding Joints

Xinjiang Provincial Standard of the People's Republic of China, Absolute detection limit

  • DB65/T 3904-2016 Limits and detection methods of exhaust pollutants from in-use vehicles (telemetry method)

Professional Standard - Navy, Absolute detection limit

  • HJB 449.13-2009 Verification regulation for torpedo testing equipments of H/YZQ-006.Part 13:Insulating examination
  • HJB 249.6-2001 Verification regulations for torpedo special test equipment Verification regulations for fish 3B special test equipment SB203.00D TS1 Overall circuit continuity and insulation test bench
  • HJB 449.9-2009 Verification regulation for torpedo testing equipments of H/YZQ-006.Part 9:Connecting apparatus

Professional Standard - Railway, Absolute detection limit

  • TB/T 3256.3-2011 Non-destructive testing of in-service components for locomotive.Part 3:Magnetic particle testing of wheelsets

ES-UNE, Absolute detection limit

  • UNE-EN 60544-2:2012 Electrical insulating materials - Determination of the effects of ionizing radiation on insulating materials - Part 2: Procedures for irradiation and test (Endorsed by AENOR in January of 2013.)
  • UNE-EN IEC 60216-5:2022 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative temperature index (RTI) of an insulating material (Endorsed by Asociación Española de Normalización in February of 2023.)
  • UNE-EN 60216-5:2008 Electrical insulating materials - Thermal endurance properties -- Part 5: Determination of relative thermal endurance index (RTE) of an insulating material (Endorsed by AENOR in September of 2008.)
  • UNE-EN ISO 17643:2016 Non-destructive testing of welds - Eddy current examination of welds by complex plane analysis (ISO 17643:2015)
  • UNE-EN ISO 20601:2019 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology for thin-walled steel components (ISO 20601:2018)

Professional Standard - Energy, Absolute detection limit

  • NB/T 10823-2021 Guidelines for X-ray Inspection of Converter Transformer Insulation Cardboard and Paper Insulation Formed Parts
  • NB/T10823-2021
  • DL/T 2471-2021 Measurement method of relative content of soluble degradation products in insulating oil

American National Standards Institute （ANSI), Absolute detection limit

  • ANSI C29.11-2012 Composite Suspension Insulators for Overhead Transmission Lines - Test
  • ANSI/IEEE 1528:2003 Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques
  • ANSI/EIA 455-179:1988 Inspection of Cleaved Fiber End Faces by Interferometry

农业农村部, Absolute detection limit

  • NY/T 3784-2020 Pesticide thermal safety testing method adiabatic calorimetry
  • SC/T 7238-2020 Detection method of shrimp mortality Notamura virus (CMNV)

Professional Standard - Construction Industry, Absolute detection limit

  • JG/T 415-2013 Limit and test method of harmful substances in fire-retardant coating

API - American Petroleum Institute, Absolute detection limit

  • API PUBL 4721-2002 Analytical Detection and Qualification Limits: Survey of State and Federal Approaches

International Electrotechnical Commission (IEC), Absolute detection limit

  • IEC 60216-5:2022 CMV Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative temperature index (RTI) of an insulating material
  • IEC 60216-5:2022 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative temperature index (RTI) of an insulating material
  • IEC 60216-5:2003 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material
  • IEC 60216-5:2008 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material
  • IEC 60544-2:2012 Electrical insulating materials - Determination of the effects of ionizing radiation on insulating materials - Part 2: Procedures for irradiation and test
  • IEC 60666:1979 Detection and determination of specified anti-oxidant additices in insulating oils
  • IEC 60666:2010 Detection and determination of specified additives in mineral insulating oils
  • IEC 60216-5:2008/COR1:2009 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material; Corrigendum 1

PL-PKN, Absolute detection limit

  • PN BN 6110-21-1967
  • PN-EN ISO 11929-2-2021-07 E Determination of the characteristics limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation -- Fundamentals and application -- Part 2: Advanced applications (ISO 11929-2:2019)
  • PN E04410-23-1986 Electroinsulating varnishes Test methods Testing of arc resistance and tracking resistance
  • PN-EN ISO 11929-1-2021-07 E Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation -- Fundamentals and application -- Part 1: Elementary applications (ISO 11929-1:2019)
  • PN BN 6110-15-1966

IN-BIS, Absolute detection limit

RO-ASRO, Absolute detection limit

  • STAS 11606-1981 ELECTRICAL INSULATING OILS Corrosive sulphur detection by silver blade method
  • STAS 6661-1982 Transport acoustics NOISE EMITTED BY RAILWAY VE1I1CLES Methods for mcasurement and admissible limits
  • STAS 6048/9-1980 Radio- interference RAD IO INTER FERENCE SUPPRESSION BY RADIO AND TELEVISSION REGEIVERS Permissible limits of interferences and special test conditions
  • STAS 10221-1983 TESTING OF METALS Hot tracking of deposited metal by welding

Lithuanian Standards Office , Absolute detection limit

  • LST EN 1711-2000 Non-destructive examination of welds - Eddy current examination of welds by complex plane analysis
  • LST EN 1711-2000/A1-2004 Non-destructive examination of welds - Eddy current examination of welds by complex plane analysis
  • LST EN 60666-2010 Detection and determination of specified additives in mineral insulating oils (IEC 60666:2010)
  • LST EN 60544-2-2013 Electrical insulating materials - Determination of the effects of ionizing radiation on insulating materials -- Part 2: Procedures for irradiation and test (IEC 60544-2:2012)
  • LST EN 62535-2009 Insulating liquids - Test method for detection of potentially corrosive sulphur in used and unused insulating oil (IEC 62535:2008)
  • LST EN 60343-2002 Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges (IEC 60343:1991)
  • LST EN ISO 11929-2:2021 Determination of the characteristics limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation - Fundamentals and application - Part 2: Advanced applications (ISO 11929-2:2019)
  • LST EN ISO 11929-1:2021 Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation - Fundamentals and application - Part 1: Elementary applications (ISO 11929-1:2019)
  • LST EN 60216-5-2008 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material (IEC 60216-5:2008)

Professional Standard - Electron, Absolute detection limit

  • SJ/T 11692-2017 Guideline of sample disjointment for testing certain restricted substances in electrical and electronic products

Beijing Provincial Standard of the People's Republic of China, Absolute detection limit

  • DB11/ 1476-2017 Rapid detection method and emission limit value of nitrogen oxides in heavy-duty vehicles
  • DB11/ 318-2022 Emission limits and measurement methods of exhaust pollutants from in-use gasoline vehicles (remote sensing detection method)

IT-UNI, Absolute detection limit

  • UNI EN ISO 11929-1:2021 Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation - Fundamentals and application - Part 1: Elementary applications
  • UNI ISO 11929-4:2021 Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application — Part 4: Guidelines to applications
  • UNI EN ISO 11929-2:2021 Determination of the characteristics limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation - Fundamentals and application - Part 2: Advanced applications
  • UNI EN ISO 11929-3:2021 Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation - Fundamentals and application - Part 3: Applications to unfolding methods

NL-NEN, Absolute detection limit

  • NEN 881-1970 Requirements and test methods for red lead pigments
  • NEN 878-1969 Requirements and test methods for pigments. White lead
  • NEN 6573-1987 Bacteriological examination of water Examination by means of membrane filtration on the presence and the number of colony forming units (CFU) Pseudomonas aeruginosa
  • NEN 879-1969 Requirements and test methods for pigments. Lithopone

Military Standard of the People's Republic of China-General Armament Department, Absolute detection limit

  • GJB 7214-2011 Troop detection regulation for radar EW reconnaissance equipment
  • GJB 5667-2006 General specification for land-based test equipment in communication EW
  • GJB 5669-2006 General specification for land-based test equipment in radar EW
  • GJB 6604-2008 Detection regulation for communication EW reconnaissance equipment in troop

Professional Standard - Textile, Absolute detection limit

Liaoning Provincial Standard of the People's Republic of China, Absolute detection limit

  • DB21/T 2181-2013 Limits and detection methods of exhaust pollutants from in-use vehicles in Liaoning Province (telemetry method)

Shandong Provincial Standard of the People's Republic of China, Absolute detection limit

  • DB37/T 2208-2012 Limits and detection methods of exhaust pollutants from in-use vehicles in Shandong Province (telemetry method)

PT-IPQ, Absolute detection limit

CN-QIYE, Absolute detection limit

Institute of Electrical and Electronics Engineers (IEEE), Absolute detection limit

  • IEEE 43-2000 Recommended practice for testing insulation resistance of rotating machinery
  • IEEE 43-1974 Recommended practice for testing insulation resistance of rotating machinery

Jilin Provincial Standard of the People's Republic of China, Absolute detection limit

  • DB22/T 3262-2021 Technical regulations for transvaginal ultrasound detection of postmenopausal vaginal bleeding

CO-ICONTEC, Absolute detection limit

国家能源局, Absolute detection limit

  • NB/SH/T 0802-2019 Determination of 2,6-di-tert-butyl-p-cresol in insulating oil by infrared spectroscopy

CENELEC - European Committee for Electrotechnical Standardization, Absolute detection limit

  • EN 60544-2:2012 Electrical insulating materials - Determination of the effects of ionizing radiation on insulating materials - Part 2: Procedures for irradiation and test

GOSTR, Absolute detection limit

  • GOST 34656-2020 Axels for wheelsets of railway rolling stock. Nondestructive inspection methods

工业和信息化部/国家能源局, Absolute detection limit

  • JB/T 13051-2017 High-power diesel engine crankshaft cleanliness limits and testing method standards

国家质量监督检验检疫总局, Absolute detection limit

  • SN/T 4450-2016 Liquid chromatography method for detection of 9 restricted dyes in plastic and PVC shoe materials

BE-NBN, Absolute detection limit

  • NBN T 03-407-1983 Aluminium oxide primarily used for the production of aluminium - Determination of absolute density - Pyknometer method

TR-TSE, Absolute detection limit

  • TS 922-1971 ALUMINIUM OXIDE PRIMARILY USED FOP THE PRODL'CTION OF ALUMINIUM DETERMINATION OF ABSOLUTE DENSITY PYKNOMETER METHOD

Hubei Provincial Standard of the People's Republic of China, Absolute detection limit

  • DB42/T 1276-2017 Limits and detection methods of exhaust pollutants from in-use vehicles in Hubei Province (telemetry method)

  detection limit, detection limit, Volt-ampere + detection limit, flow detection limit, rod detection limit, peak detection limit, limit detection, Cadmium detection limit, Method detection limit, Method detection limit, Detection limit and decision limit, About Detection Limits, detection detection limit, detection method detection limit, Substance detection limit, UV detection limit, radiation detection limit, Detection Limit Sample, Absolute detection limit and relative detection limit, Absolute detection limit.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved