ZH
RU
ES

Stone Strength Testing

Stone Strength Testing, Total:497 items.

In the international standard classification, Stone Strength Testing involves: Construction industry, Construction materials, Vibrations, shock and vibration measurements, Seals, glands, Mining and quarrying, Inorganic chemicals, Textile fibres, Products of the textile industry, Structures of buildings, Measurement of force, weight and pressure, Iron and steel products, Metalliferous minerals, Mechanical testing, Electrical accessories, Adhesives, Analytical chemistry, Products of the chemical industry, Equipment for the chemical industry, Measurement of volume, mass, density, viscosity, Construction equipment, Mining equipment, Conducting materials, Insulating fluids, Non-destructive testing, Wood, sawlogs and sawn timber, Bridge construction, Protection of and in buildings, Non-metalliferous minerals, Testing of metals, Earthworks. Excavations. Foundation construction. Underground works, Farming and forestry, Nuclear energy engineering, Occupational safety. Industrial hygiene, Fuels, Metrology and measurement in general, Road engineering, Resistors, Electricity. Magnetism. Electrical and magnetic measurements, Road vehicles in general, Cellular materials, Non-textile floor coverings, Linear and angular measurements, Paper and board, Reinforced plastics, Freight distribution of goods, Refractories, Ceramics, Thermodynamics and temperature measurements, Fertilizers, Elements of buildings, Equipment for processing of minerals, Medical equipment, Wood-based panels, Powder metallurgy, Raw materials for rubber and plastics, Packaging and distribution of goods in general.

Group Standards of the People's Republic of China, Stone Strength Testing

T/CECS 914-2021 Test standard for bond strength of facing stone in construction engineering
T/CSEB 0004-2018 Testing method for determining the dynamic unaxial compression strength of rock materials
T/CECS 965-2021 Technical specification for testing wood strength by pendulum hammer method
T/CSEB 0003-2018 Testing method for determining dynamic shear strength of rock materials by the punch shear specimen
T/CECS 964-2021 Technical specification for testing yield strength of steel by pendulum hammer method
T/ZS 0336-2022 Technical specification for testing tensile strength of steel construction in site by Leeb-hardness method
T/CSEB 0001-2018 Testing method for determining dynamic tensile strength of rock materials by the Brazilian disc specimen
T/CSEB 0002-2018 Testing method for determining dynamic bending strength of rock materials by the Semi-circular Bending specimen
T/CECS 801-2021 Technical specification for testing the compressive strength of cement-based grouting materials by rebound method
T/HBMIF 005-2022 Technical requirements for ground strength detector
T/CSTM 00902-2023 Calibration specification for lime reactivity analyzer
T/ZZXJX 052-2021 Technical specification for testing concrete strength by core drilling method

PL-PKN, Stone Strength Testing

PN B04116-1991 Stone materials. Determination of the flexural strength
PN B04115-1967 S?one materials etermination of stones ?rength impact resis?ance
PN H04061-1992 Iron ore pellets. Determination of crushing strength
PN C04907-1972 Wood preserwative Determination on strongth properties of wood
PN H04173-1993 Refractory materials. Determination of crushing strength of insulating products
PN H04941-1986 Sintered metal materials Determination of radial crushing strength
PN D04216-1965 Lignofol i lignos?on Oznaczanie wytrzyma?o?ci na zginanie statyczne

HU-MSZT, Stone Strength Testing

CZ-CSN, Stone Strength Testing

CSN 72 1157-1968 Determination of strength of natural building stone
CSN 72 1163-1983 Determination of compressive strenglit of natural building slone
CSN 72 2221-1972 Dctermination of hydraulic lime strength
CSN ISO 3271:1993 Iron ores. Determination of tumbler strength tumbler strength
CSN ISO 4700:1992 Iron ore pellets. Determination of crushing strength
CSN 72 6013-1980 Dotermination of crushing strength o? ceramic producls. Determination of ultimate crash strength of graphite stoppers.
CSN 80 0235-1993
CSN 35 8071 Cast.3-1985 Resistors. Method of checking of dielectric strenght of the insulation
CSN 44 1825-1981 Iron ore pellets. Method of determination of crushing strength
CSN 64 5436-1974 Testing of cellular materials. Determination of shear strength of rigid cellular materials
CSN 49 0115-1979 Wood. Determination of ultimate strength in flexure tests
CSN 72 5015-1982 Testing of ceramic electrotechnic materials. Definítion of the compressive strength
CSN 72 5040 Cast.2-1973 Testing of fired ceramic materials. Defill i t ion of the eleetrie strensrth
CSN 72 1167-1983 Determination of Vickers hardness of natural building stone
CSN 34 6316-1984 Testing of ceramic clecuotechnic materials. Method of the determination of the electric strength
CSN 34 6314-1985 Testing of ceramic electrotechnic materials. Method of the determination of the bending strenght
CSN 72 5018-1973 Testing of fired ceramio materials. Definition of the impulse flexural strenght
CSN 66 6634-1984 Determination of the impact strength of photographic materials on transparent base
CSN 72 5016-1982 Testing of ceramic electrotechnic materials. Definition of the tensile strength
CSN 72 5040 Cast.1-1973 Testing of fired ceramic materials. Definition of the electric strength

NL-NEN, Stone Strength Testing

NEN 5185-1990 Quarry stone and similar stony materials Determination of crushing strength
NEN 5183-1990 Quarry stone and similar stony materials Determination of thickness and length ratio
NEN 5186-1990 Quarry stone and similar stony materials Determination of density of pieces with a volume of at least 50 ml

YU-JUS, Stone Strength Testing

JUS B.B8.017-1987 Natural stone. Testing of flexurals strength
JUS B.B8.012-1987 Natural stone. Testing of compressive slrength
JUS D.A1.047-1979 Testing ofwood. Determination ofimpact bending strength
JUS D.A8.088-1984 Tasting of fibre building boards. Datarmination Janka hardness strength
JUS H.K8.024-1979 Wood adhesives testing methods. Determination ofshear strenght
JUS D.A8.086-1984 Testing of fibre building boards. Determination of tensile strength parallel to boards
JUS D.A1.046-1979 Testing ofwood. Determination ofuttimate strength in static bending
JUS D.A8.066-1985 Testing of plywood. Determination of tensile strength
JUS D.A8.070-1985 Testing ofplywood. Determination of compressive strength
JUS D.A8.068-1985 Testing ofpywood. Determination of bending strength
JUS D.C8.110-1983 Testing of particle boards. Determination of shear strength
JUS D.C8.107-1983 Testing of particle boards. Determination ofbending strength
JUS H.N8.221-1987 Testing ofpaper. Determination offolding endurance (Chopper testerj
JUS H.N8.210-1983 Testing of paper and paperboard. Mullen bursting strength test
JUS D.A1.044-1979 Test ofwood Determination ofdensity
JUS D.A8.092-1984 Testing of fibre building boards. Determination of compressive strength
JUS G.S2.030-1987 Testing of leather. Determination of stitch tear force
JUS D.A8.087-1984 Testing of fibre building boards. Determination of bending strength
JUS D.A1.032-1979 Testingofvtood. Determmation ofstatic hardness
JUS H.N8.211-1983 Testing of board and corrugated board. Mullen bursting strength test
JUS D.A8.067-1985 Testing of plywood. Determination shear strength in adhesines layer ,
JUS D.A8.085-1984 Testing of fibre building boards. Determination ofdensity
JUS H.N8.217-1991 Testlng of paper and paperboard. Deternlnat ion of internal bond strenght
JUS B.B7.113-1993 Rock mechanics - Physical and mechanical testing of rocks - Determination of apparent density
JUS B.G8.151-1977 Methods of physcal testing of iron ores. Determination of tumbler strength

BE-NBN, Stone Strength Testing

NBN I-895-1968

IT-UNI, Stone Strength Testing

UNI 11812-2021 Natural stone test methods - Determination of strength of individual stone anchorages in dimension stone
UNI 4622-1960
UNI 4454-1960
UNI 4623-1960
UNI F.A.54-1973
UNI 6062-1967

IN-BIS, Stone Strength Testing

Taiwan Provincial Standard of the People's Republic of China, Stone Strength Testing

CNS 13976-1997 Method of test for flexural strength of dimensional stone
CNS 14447-2000 Method of measurement for glossiness on surface of ornamental stone

Professional Standard - Machinery, Stone Strength Testing

JB/T 9141.2-1999 Test method for tensile strength of flexible graphite sheets
JB/T 9141.3-1999 Test method for compressive strength of flexible graphite sheets
JB/T 9141.2-2013 Flexible graphite sheets.Part 2: Test method for tensile strength
JB/T 9141.3-2013 Flexible graphite sheets.Part 3: Test method for compressive strength
JB/T 7609-2006 Test method of resistant impact strength for carbon-graphite material
JB/T 7609-1994 Test method for impact strength of carbon graphite materials
JB/T 9141.1-1999 Test method for density of flexible graphite sheets
JB/T 7150-1993 Main inspection items and detection methods of high-strength bolts for construction machinery
JB/T 7522-2004 Ultrasonic Velocity Measurement Method for Nondestructive Testing Materials

European Committee for Standardization (CEN), Stone Strength Testing

EN 1926:2006 Natural stone test methods - Determination of uniaxial compressive strength
EN 1926:1999 Natural Stone Test Methods - Determination of Compressive Strength
FprEN 12372-2021 Natural stone test methods - Determination of flexural strength under concentrated load
EN ISO 24345:2012 Resilient floor coverings - Determination of peel resistance (ISO 24345:2006)
EN 1052-2:2016 Methods of test for masonry - Part 2: Determination of flexural strength
EN 14617-2:2008 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)

Standard Association of Australia （SAA）, Stone Strength Testing

AS 4133.4.3.2:2022 Methods of testing rocks for engineering purposes, Method 4.3.2: Rock strength tests — Determination of the deformability of rock materials and uniaxial compressive strength — Rock strength less than 50 MPa
AS 4133.4.2.1:2022 Methods of testing rocks for engineering purposes, Method 4.2.1: Rock strength tests — Determination of uniaxial compressive strength — Rock strength greater than 50 MPa
AS 4133.4.3.2:2013
AS 4133.4.2.2:2013
AS 4133.4.2:1993 Methods of testing rocks for engineering purposes - Rock strength tests - Determination of uniaxial compressive strength
AS 4133.4.3.1:2009
AS 4133.4.3:1993 Methods of testing rocks for engineering purposes - Rock strength tests - Determination of deformability of rock materials in uniaxial compression
AS 4133.4.1:1993/Amdt 1:1994
AS 4133.4.1:2007 Methods of testing rocks for engineering purposes - Rock strength tests - Determination of point load strength index
AS 4133.4.1:1993 Methods of testing rocks for engineering purposes - Rock strength tests - Determination of point load strength index
AS 4133.4.2.1:2007 Methods of testing rocks for engineering purposes - Rock strength tests - Determination of uniaxial compressive strength of 50 MPa and greater

Association Francaise de Normalisation, Stone Strength Testing

FD U42-412:2014 Fertilizers - Liming materials, liming materials-fertilizers and fertilizers - Determination of the crushing strength
NF EN 1926:2007 Méthodes d'essai des pierres naturelles - Détermination de la résistance en compression uniaxiale
NF EN 13161:2008 Méthodes d'essai pour pierres naturelles - Détermination de la résistance en flexion sous moment constant
NF B10-621*NF EN 12372:2022 Natural stone test methods - Determination of flexural strength under concentrated load
NF P94-423:2002 Roches - Détermination de la résistance à la compression triaxiale
NF B10-602-2*NF EN 14617-2:2016 Agglomerated stone - Test methods - Part 2 : determination of flexural strength (bending)
NF M60-407*NF ISO 10980:1998 Validation of the strength of reference solutions used for measuring concentrations.
NF EN 12407:2019 Méthodes d'essai de pierres naturelles - Examen pétrographique
NF T54-123:1987 Plastiques - Feuilles - Détermination de la résistance à l'éclatement.
NF A20-202:1984 Iron ores pellets. Determination of crushing strength.
NF P94-422:2001 Roches - Détermination de la résistance à la traction - Méthode indirecte - Essai brésilien
NF G38-119*NF EN 14151:2010 Geosynthetics - Determination of burst strength
NF EN 14151:2010 Géosynthétiques - Détermination de la résistance à l'éclatement
NF B10-614*NF EN 1926:2007 Natural stone test methods - Determination of uniaxial compressive strength
NF P14-204-2*NF EN 13892-2:2003 Methods of test for screed materials - Part 2 : determination of flexural and compressive strength
NF EN 14617-2:2016 Pierre agglomérée - Méthodes d'essai - Partie 2 : détermination de la résistance à la flexion (traction)
NF B10-621:2007 Natural stone test methods - Determination of flexural strength under concentrated load.

German Institute for Standardization, Stone Strength Testing

DIN 51914:1985 Testing of carbon materials; determination of tensile strength; solid matters
DIN 51910:1997 Testing of carbon materials - Determination of compressive strength - Solid materials
DIN EN 12372:1999 Natural stone test methods - Determination of flexural strength under concentrated load; German version EN 12372:1999
DIN EN 12372:2007 Natural stone test methods - Determination of flexural strength under concentrated load; English version of DIN EN 12372:2007-02
DIN EN 1926:2007-03 Natural stone test methods - Determination of uniaxial compressive strength; German version EN 1926:2006
DIN EN 13161:2008-08 Natural stone test methods - Determination of flexural strength under constant moment; German version EN 13161:2008
DIN EN 12372:2022 Natural stone test methods - Determination of flexural strength under concentrated load
DIN EN 12372:2022-05 Natural stone test methods - Determination of flexural strength under concentrated load; German version EN 12372:2022
DIN 22024:1989 Investigations of the raw material in hard-coal-mining; determination of tensile strength on solid rock
DIN EN ISO 2759:2014-10 Board - Determination of bursting strength (ISO 2759:2014); German version EN ISO 2759:2014
DIN 52274:1986 Testing of mineral fibre insulating materials; determination of interlaminar tensile strength perpendicular to plane of insulating layer
DIN 52189-1:1981 Testing of wood; Impact bending test; Determination of impact bending strength
DIN 52187:1979 Testing of wood; determination of ultimate shearing stress parallel to grain
DIN EN 12407:2019-12 Natural stone test methods - Petrographic examination; German version EN 12407:2019
DIN 51717:2016 Testing of solid fuels - Determination of mechanical strength of coke
DIN 51717:1994 Testing of solid fuels; determination of mechanical strength of coke
DIN EN 1521:1996 Determination of flexural strength of lightweight aggregate concrete with open structure; German version EN 1521:1996
DIN EN ISO 24345:2012 Resilient floor coverings - Determination of peel resistance (ISO 24345:2006); German version EN ISO 24345:2012
DIN 51910:2009 Testing of carbonaceous materials - Determination of compressive strength - Solid materials
DIN 51914:2009 Testing of carbonaceous materials - Determination of tensile strength - Solid materials
DIN 52182:1976 Testing of wood; determination of density
DIN 52272-1:1982 Testing of mineral fibrous insulating materials; pressure test; evaluation of compressive stress and resistance to compression
DIN 61551:2008-01 Geosynthetics - Determination of burst strength
DIN EN 14151:2010-11 Geosynthetics - Determination of burst strength; German version EN 14151:2010
DIN 51030:2015-01 Testing of ceramic raw and basic materials - Determination of dry bending strength of unfired products
DIN 51902:2009 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN 51944:2009 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN 53864:1978 Testing of textiles; determination of the bending strength, method according to Schlenker
DIN EN 1926:2007 Natural stone test methods - Determination of uniaxial compressive strength; English version of DIN EN 1926:2007-03
DIN EN 14617-2:2008 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending); German version EN 14617-2:2008
DIN 51910:2020-12 Testing of carbonaceous materials - Determination of compressive strength - Solid materials
DIN 51914:2020-12 Testing of carbonaceous materials - Determination of tensile strength - Solid materials
DIN EN 16318:2016-07 Fertilizers and liming materials - Determination of chromium(VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B); German version EN 16318:2013+A1:2016
DIN 51230:1977 Material Testing Machines; Dynstat Apparatus for the Determination of Bending Strength and Impact Strength of Small Specimens
DIN EN 14617-15:2005 Agglomerated stone - Test methods - Part 15: Determination of compressive strength; German version EN 14617-15:2005
DIN 53366:2007-10 Testing of plastic films and sheetings - Determination of blocking strength

Korean Agency for Technology and Standards (KATS), Stone Strength Testing

KS F 2519-2000 Testing method for compressive strength of natural building stone
KS M 7050-2004 Testing method for surface strength of paper by wax
KS E ISO 3271:2008 Iron ores for blast furnace and direct reduction feedstocks－Determination of the tumble and abrasion indices
KS E ISO 4700:2010 Iron ore pellets for blast furnace and direct reduction feedstocks-Determination of the crushing strength
KS E 3714-2022 Iron ore sinter — Determination of shatter strength
KS E ISO 4700:2017 Iron ore pellets for blast furnace and direct reduction feedstocks－Determination of the crushing strength
KS E 3714-1981 Iron ore sinter — Determination of shatter strength
KS F 2519-2020 Standard test method for compressive strength of natural building stone
KS E 3714-1997(2002) Iron ore sinter－Determination of shatter strength
KS E 3714-2012(2017) Iron ore sinter－Determination of shatter strength
KS E 3041-2005 TEST METHOD FOR DETERMINATION OF TUMBLER STRENGTH OF IRON ORES
KS L 3503-2008 Method of test for crushing strength and modulus of rupture of castable refractories
KS L 3503-2013 Testing method for crushing strength and modulus of rupture of castable refractory
KS L 3503-1982 Method of test for crushing strength and modulus of rupture of castable refractories
KS E ISO 8531:2003 Manganese and chromium ores－Experimental methods for checking the precision of moisture determination
KS B 5314-1986(2016) Liquid-in-glass thermometers for testing of petroleum products
KS E 3031-2020 Method for sampling and preparation of specimens for rock strength test
KS F 2902-2008 Test methods for bond strength of sprayed fire resistive material applied to structural members
KS M ISO 5435:2012 Rubber compounding ingredients－Carbon black－Determination of tinting strength

RU-GOST R, Stone Strength Testing

GOST 30684-2000 Asbestos and non-asbestos gasket materials. Method of testing of tensile strength
GOST 24992-1981 Masonry structures. Method of estimating bonding strength in masonry
GOST 24036-1980 Seal sheet materials, asbestos polymer. Method of test for folding resistance
GOST R 50834-1995 Rocks. Method of the contact strength determination
GOST 21153.6-1975 Rocks. Method for the determination of bend strength limit
GOST 24765-1981 Iron pellets. Method for the determination of compression strength
GOST 21153.2-1984 Rocks. Methods for determination of axial compression strength
GOST 21153.3-1985 Rocks. Methods for determination uniaxial tensile strength
GOST 21153.5-1988 Rocks. Method for the determination of cut strength limit
GOST 21153.8-1988 Rocks. Method for determination of triaxial compressive strength
GOST 21523.1-1993 Modified wood. Method for determination of stregth of bushes
GOST 20545-1975 Ground feldsparic and quartzfeldsparic materials. Method for determination of size distribution by sieve analysis
GOST 21395.7-1975 Resistors variable. Test method for stop strength
GOST 15137-1977 Iron and manganese ores, agglomerates and pellets. Determination of tumbler strength
GOST R 55657-2013 Modified wood. Methods of plugs strength, hardness and toughness determination
GOST 16483.3-1984 Wood. Method of static bending strength determination
GOST 21554.3-1982 Sawn timber and blanks. Method for control of strength at bending, tension and compression
GOST 22690-2015 Concretes. Determination of strength by mechanical methods of nondestructive testing
GOST 22690-1988 Concretes. Determination of strength by mechanical methods of nondestructive testing
GOST 21153.1-1975 Rocks. Method for the determination of strength factor according to Protodyakonov
GOST 21554.2-1981 Sawn timber and blanks. Method for determination of ultimate strength in static bending
GOST R 50079-1992 Modified wood. Method for determination of stregth of bushes
GOST 20182-1974 Glued asbestos-cement constructions. Method for determination of glued joints shear strength
GOST 16483.5-1973 Wood. Methods for determination of ultimate shearing strength parallel to grain
GOST 16483.11-1972 Wood. Method for determination of conventional ultimate strength in compression perpendicular to grain
GOST 16483.12-1972 Wood. Method for determination of ultimate strength in shearing perpendicular to grain
GOST 16483.13-1972 Wood. Method for determination of ultimate strength in cutting perpendicular to grain
GOST R 51864-2002 Packagings. Testing methods of handle fastening strength

Professional Standard - Agriculture, Stone Strength Testing

309药典四部-2020 4000 Testing methods for pharmaceutical packaging materials 4008 Determination of heat seal strength
305药典四部-2020 4000 Testing methods for pharmaceutical packaging materials 4004 Determination of peel strength
313药典四部-2020 4000 Testing method for drug packaging material 4012 Density determination method for drug packaging material

American Society for Testing and Materials (ASTM), Stone Strength Testing

ASTM C1354/C1354M-22 Standard Test Method for Strength of Individual Stone Anchorages in Dimension Stone
ASTM C1354/C1354M-15 Standard Test Method for Strength of Individual Stone Anchorages in Dimension Stone
ASTM C1354/C1354M-21 Standard Test Method for Strength of Individual Stone Anchorages in Dimension Stone
ASTM D1320-73(1983)e1 Method of Tensile Strength of Paraffin Wax
ASTM C170/C170M-17 Standard Test Method for Compressive Strength of Dimension Stone
ASTM C170-17(2017) Standard Test Method for Compressive Strength of Dimension Stone
ASTM C170/C170M-15 Standard Test Method for Compressive Strength of Dimension Stone
ASTM D3906-19 Standard Test Method for Determination of Relative X-ray Diffraction Intensities of Faujasite-Type Zeolite-Containing Materials
ASTM D3906-03(2008) Standard Test Method for Determination of Relative X-ray Diffraction Intensities of Faujasite-Type Zeolite-Containing Materials
ASTM D5731-07 Standard Test Method for Determination of the Point Load Strength Index of Rock and Application to Rock Strength Classifications
ASTM D5731-08 Standard Test Method for Determination of the Point Load Strength Index of Rock and Application to Rock Strength Classifications
ASTM D4832-02 Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders
ASTM D3906-03(2013) Standard Test Method for Determination of Relative X-ray Diffraction Intensities of Faujasite-Type Zeolite-Containing Materials
ASTM D3906-03 Standard Test Method for Determination of Relative X-ray Diffraction Intensities of Faujasite-Type Zeolite-Containing Materials
ASTM D8377-21 Standard Guide for High Temperature Strength Measurements of Graphite Impregnated with Molten Salt
ASTM D8377-21a Standard Guide for High Temperature Strength Measurements of Graphite Impregnated with Molten Salt
ASTM D3906-97 Standard Test Method for Determination of Relative X-ray Diffraction Intensities of Faujasite-Type Zeolite-Containing Materials
ASTM D2555-06(2011) Standard Practice for Establishing Clear Wood Strength Values
ASTM D5731-95 Standard Test Method for Determination of the Point Load Strength Index of Rock
ASTM E382-12 Standard Test Method for Determination of Crushing Strength of Iron Ore Pellets

Shandong Provincial Standard of the People's Republic of China, Stone Strength Testing

DB37/T 5169-2020 Technical specification for testing the strength of building steel by imprint method
DB37/T 5046-2015 Technical specification for on-site testing of tensile strength of building steel by Leeb hardness method
DB37/T 2371-2013 Technical specification for testing masonry shear strength and masonry mortar strength by core drilling method
DB37/T 2371-2022 Technical Regulations for Testing the Shear Strength of Masonry and the Strength of Masonry Mortar by Core Drilling Method
DB37/T 2418-2013 Electronic pavement material strength tester
DB37/T 2368-2013 Technical specification for testing the compressive strength of concrete by core drilling method
DB37/T 2366-2013 Technical specification for testing the compressive strength of concrete by rebound method
DB37/T 2368-2022 Technical Regulations for Testing the Compressive Strength of Concrete by Core Drilling Method
DB37/T 2366-2022 Technical Regulations for Testing the Compressive Strength of Concrete by Rebound Method

Danish Standards Foundation, Stone Strength Testing

DS/EN 1926:2007 Natural stone test methods - Determination of uniaxial compressive strength
DS/EN 13161:2008 Natural stone test methods - Determination of flexural strength under constant moment
DS/EN 12372:2007 Natural stone test methods - Determination of flexural strength under concentrated load
DS/EN 14151:2010 Geosynthetics - Determination of burst strength
DS/EN 14617-15:2005 Agglomerated stone - Test methods - Part 15: Determination of compressive strength
DS/EN 13892-2:2003 Methods of test for screed materials - Part 2: Determination of flexural and compressive strength

Lithuanian Standards Office , Stone Strength Testing

LST EN 1926-2007 Natural stone test methods - Determination of uniaxial compressive strength
LST EN 13161-2008 Natural stone test methods - Determination of flexural strength under constant moment
LST EN 12372-2007 Natural stone test methods - Determination of flexural strength under concentrated load
LST EN 14151-2010 Geosynthetics - Determination of burst strength
LST EN 14617-15-2005 Agglomerated stone - Test methods - Part 15: Determination of compressive strength
LST EN 13892-2-2003 Methods of test for screed materials - Part 2: Determination of flexural and compressive strength

未注明发布机构, Stone Strength Testing

BS EN 1926:2006(2007) Natural stone test methods — Determination of uniaxial compressive strength
JIS M 8711:2023 Iron ore sinter -- Determination of shatter strength

AENOR, Stone Strength Testing

UNE-EN 1926:2007 Natural stone test methods - Determination of uniaxial compressive strength
UNE-EN 13161:2008 Natural stone test methods - Determination of flexural strength under constant moment
UNE-EN 12372:2007 Natural stone test methods - Determination of flexural strength under concentrated load
UNE 22950-4:1992 MECHANICAL PROPERTIES OF ROCKS. STRENGTH DETERMINATION TESTS. PART 4: TRIAXIAL COMPRESSION STRENGTH
UNE 22950-1:1990 MECHANICAL PROPERTIES OF ROCKS. STRENGTH DETERMINATION TESTS. PART 1. UNIAXIAL COMPRESSIVE STRENGTH
UNE 59611:1994 FOOTWEAR MATERIALS. LACES. DETERMINATION TENSILE STRENGTH.
UNE 22950-2:1990 MECHANICAL PROPERTIES OF ROCKS. STRENGTH DETERMINATION TESTS. PART 2: TENSILE STRENGTH. INDIRECT DETERMINATION (BRAZILIAN TEST).
UNE-EN 14151:2010 Geosynthetics - Determination of burst strength
UNE-EN 14617-15:2006 Agglomerated stone - Test methods - Part 15: Determination of compressive strength
UNE-EN 13892-2:2003 Methods of test for screed materials - Part 2: Determination of flexural and compressive strength

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Stone Strength Testing

GB/T 9966.8-2008 Test methods for natural facing stone - Part 8: Test method for structural strength of stone hanging systems using uniform static differential pressure
GB/T 9966.8-2001 Test methods for natural facing stones Part 8: Test method for structural performance of dimension stone cladding systems by uniform static pressure difference
GB/T 9966.7-2001 Test methods for natural facing stones Part 7: Test method for strength of individual stone anchorages
GB/T 14074.10-1993 Test methods for wood adhesives and their resins - Determination of wood bonding strength
GB/T 21921-2008 Test method for tensile strength of impermeable graphite materials
GB/T 13465.2-2002 Test method for flexure strength of impermeable graphite materials
GB/T 13465.3-2002 Test method for compressive strength of impermeable graphite materials
GB/T 3074.1-2008 Method for the determination of the flexure strength of graphite electrodes
GB/T 3074.1-1982 Method for determination of the flexure strength of graphite electrodes
GB/T 9966.7-2020 Test methods for natural stone—Part 7:Determination of strength for individual stone anchorages
GB/T 13465.2-2014 Test method of impermeable graphite materials.Part 2:Flexure strength
GB/T 13465.4-2014 Test method of impermeable graphite materials.Part 4:Impact strength
GB/T 13465.3-2014 Test method of impermeable graphite materials.Part 3:Compress strength
GB/T 1431-1985 Carbon materials--Determination of the compressive strength
GB/T 8721-2009 Method for the determination of tensile strength of carbonaceous materials
GB/T 1431-2009 Carbon materials-Determination of the compressive strength
GB/T 8721-2019 The test method for tensile strength of carbon materials
GB/T 8721-1988 Method for the determination of tensile strength of carbonaceous materials
GB/T 19496-2004 Determinating of the compressive strength of spun high-strength concrete cores
GB/T 4966-2022 Test method for tensile strength of domestic ceramic materials
GB/T 23900-2009 Non-destructive testing.Practice for measuring ultrasonic velocity in materials
GB/T 10424-2002 Sintered metal friction materials--Determination of compressive strength

Professional Standard - Petrochemical Industry, Stone Strength Testing

SH/T 0402-1992 Determination of Paraffin Tensile Strength
SH/T 0101-1991 Method for determination of dielectric strength of petroleum wax and petroleum grease

AT-ON, Stone Strength Testing

ONORM B 3124 Teil.4-1981 Testing of natural stone; Mechanical properties of rock; Uniaxial tensile strength (Brazilian Test)
ONORM B 3124 Teil.2-1981 Testing of natural stone; Mechanical properties of rock; Uniaxial compressive strength of cubical specimens
ONORM B 3124 Teil.1-1981 Testing ot natural stone; Mechanical properties of rock; Uniaxial compressive strength ot cylindrical specimens
ONORM B 3124 Teil.3-1981 Testing of natural stone; Mechanical properties of rock; Uniaxial tensile strength (direct tension test)
OENORM EN 12372-2021 Natural stone test methods - Determination of flexural strength under concentrated load
ONORM B 3121-1978 Testing of natural stone; density, apparent density, bulk density

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Stone Strength Testing

GB/T 35160.3-2017 Test methods for agglomerated stone—Part 3：Determination of compressive strength
GB/T 35160.2-2017 Test methods for agglomerated stone—Part 2：Determination of flexural strength

International Organization for Standardization (ISO), Stone Strength Testing

ISO 3271:1975 Iron ores — Determination of tumbler strength
ISO 3271:1995 Iron ores - Determination of tumble strength
ISO 4700:1996 Iron ore pellets - Determination of crushing strength
ISO 4700:1983 Iron ore pellets; Determination of crushing strength
ISO 3271:1985 Iron ores; Determination of tumbler strength
ISO 3133:1975 Wood; Determination of ultimate strength in static bending
ISO 3348:1975 Wood; Determination of impact bending strength
ISO 12817:2013 Fibre-reinforced plastic composites - Determination of open-hole compression strength
ISO 12817:2012 Fibre-reinforced plastic composites - Determination of open-hole compression strength
ISO 12815:2013 Fibre-reinforced plastic composites - Determination of plain-pin bearing strength
ISO 13910:2005 Structural timber - Characteristic values of strength-graded timber - Sampling, full-size testing and evaluation
ISO 20585:2005 Wood-based panels - Determination of wet bending strength after immersion in water at 70℃ or 100℃ (boiling temperature)

TR-TSE, Stone Strength Testing

TS 2828-1977 Iron Ores — Determination On Tumbler Strength
TS 2027-1975 DETERMINATION OF DIRECT TENSILE STRBNGTH OF ROCKS
TS 2028-1975 DETERMINATION OF UNCONFINED COMPBESSIVE STRENGTH OF R0CKS
TS 2026-1975 DETERMINATION OF COMPRESSIVE STRENGTH OF IRON ORE PELLETS
TS 2501-1977 Method For Measuring The Shatter Strength Of Iron Ore Sinter
TS 2474-1976 Wood-Determination of altimate strength in static bending
TS 2477-1976 Wood - Determination of Impact Bending Strength
TS 2476-1976 Wood - Dete?mination of Ultimate Tensile Stress Perpendicular to G?ain
TS 2475-1976 Wood-Determination of Ultimate Tensile Stress Parallel to Grain

Japanese Industrial Standards Committee (JISC), Stone Strength Testing

JIS M 8712:1993 Iron ores -- Determination of tumble strength
JIS M 8712:2000 Iron ores -- Determination of tumble strength
JIS M 8712:2009 Iron ores -- Determination of tumble strength
JIS M 8712:2022 Iron ores -- Determination of tumble strength
JIS M 8718:2000 Iron ore pellets -- Determination of crushing strength
JIS M 8718:2009 Iron ore pellets -- Determination of crushing strength
JIS M 8718:1993 Iron ore pellets -- Determination of crushing strength
JIS M 8712 AMD 1:2009 Iron ores - Determination of tumble strength (Amendment 1)
JIS M 8711:1993 Iron ore sinter -- Determination of shatter strength
JIS M 8712 AMD 1 R:2009 Iron ores -- Determination of tumble strength (Amendment 1)
JIS M 8711:2011 Iron ore sinter -- Determination of shatter strength

BR-ABNT, Stone Strength Testing

ABNT P-MB-388-1966
ABNT MB-251-1972
ABNT MB-1316-1979
ABNT MB-1315-1979
ABNT MB-1317-1979
ABNT MB-1236-1979
ABNT MB-1245-1979
ABNT MB-60-1980
ABNT NBR 12141-2017 Filtering material - Gravel - Determination of granulometric composition
ABNT MB-1247-1979
ABNT NBR 10188-2017 Textile materials - Determination of hot strength in action of hot iron
ABNT MB-270-1962
ABNT P-MB-330-1963

国家市场监督管理总局、中国国家标准化管理委员会, Stone Strength Testing

GB/T 9966.17-2021 Test methods for natural stone—Part 17: Determination of resistance to salt crystallization
GB/T 9966.15-2021 Test methods for natural stone—Part 15: Determination of resistance ageing by salt mist
GB/T 38898-2020 Non-destructive testing—Testing method for measuring coating bond strength using ultrasonic wave
GB/T 9966.11-2021 Test methods for natural stone—Part 11: Determination of resistance to ageing by cold and thermal shock
GB/T 38947-2020 Magnetic flux density test method for magnetic separators
GB/T 1431-2019 The test method for compressive strength of carbon materials
GB/T 3074.1-2021 The test method for flexural strength of carbon materials
GB/T 39163-2020 Test methods of the bonding strength for target-backing plate assemblies
GB/T 6525-2019 Determination of compression strength for sintered metal materials at room temperature

ES-UNE, Stone Strength Testing

UNE-EN 12372:2022 Natural stone test methods - Determination of flexural strength under concentrated load
UNE-EN 12407:2020 Natural stone test methods - Petrographic examination
UNE 22950-2:2003 ERRATUM Mechanical properties of rocks. Strength determination tests. Part 2: Traction strength. Indirect determination (Brazilian test).
UNE 59611:2018 Footwear materials. Laces. Determination of tensile strength
UNE-EN 16318:2015+A1:2016 Fertilizers and liming materials - Determination of chromium (VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B)

Professional Standard - Construction Industry, Stone Strength Testing

JGJ/T 294-2013 Technical specification for strength testing of high strength concrete
JG/T 507-2016 Digital sticking strength tester
JG 3056-1999 Digital sticking strength tester
JGJ/T 368-2015 Technical specification for testing shear strength of masonry and strength of mortar with drilled core
JGJ/T 384-2016 Technical specification for testing concrete strength by core drilling method
JGJ/T 23-2001 Technical specification for inspection of concrete compressive strength by rebound method
JGJ/T 23-2001（条文说明） Technical Specification for Inspection of Concrete Compressive Strength by Rebound Method(explanation)
JGJ/T 23-2011 Technical specification for inspecting of concrete compressive strength by rebound method
JGJ/T 23-1992 Technical Specification for Inspection of Concrete Compressive Strength by Rebound Method(explanation)
JGJ/T 378-2016 Technical specification for testing the compressive strength of concrete by pull-off method

Professional Standard - Non-ferrous Metal, Stone Strength Testing

YS/T 63.15-2006 Carbonaceous materials used in the production of aluminium. Part 15:Determination of compressive strength
YS/T 63.15-2012 Carbonaceous materials used in the production of aluminium.Part 15:Determination of compressive strength
YS/T 63.15-2023 Carbonaceous materials used for the production of aluminium — Part 15:Determination of compressive strength
YS/T 63.14-2006 Carbonaceous materials used in the production of aluminium-Part 14:Determination of bending/shear strength by a three-point method
YS/T 63.14-2023 Carbonaceous materials used for the production of aluminium — Part 14:Determination of bending/shears strength — Three point method
YS/T 1009-2014 Sintered metal porous materials.Determination of shear strength
YS/T 1010-2014 Test method for ring tensile strength of sintered porous metal

Professional Standard - Chemical Industry, Stone Strength Testing

HG/T 2642-2006 Test method for tensile strength of impermeable graphite materials
HG/T 2642-1994 Test method for tensile strength of impermeable graphite materials

Professional Standard - Aviation, Stone Strength Testing

HB 5367.1-1986 Test method for compressive strength of carbon graphite sealing materials
HB 5367.2-1986 Test method for flexural strength of carbon graphite sealing materials
HB 20096-2012 Barkhausen inspection for thermal damage of high-strength steel
HB 5367.7-1986 Method for Determination of Density of Carbon Graphite Sealing Materials
HB/Z 35-1982 Instructions for Ultrasonic Inspection of Stainless Steel and High Strength Structural Steel Bars

British Standards Institution (BSI), Stone Strength Testing

21/30403937 DC BS EN 12372. Natural stone test methods. Determination of flexural strength under concentrated load
BS EN 12372:2022 Tracked Changes. Natural stone test methods. Determination of flexural strength under concentrated load
BS 6599:1985 Method for determination of crushing strength of iron ore pellets
BS EN 14617-2:2008 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
BS 5756:1997 Specification for visual strength grading of hardwood
BS EN 14617-15:2005 Agglomerated stone - Test methods - Determination of compressive strength
BS EN 1052-1:1999 Methods of test for masonry - Determination of compressive strength
BS EN 16210:2013 Transportation loads. Measurement and evaluation of climatic and other loads. Data acquisition and general requirements for measuring equipment
BS ISO 12817:2013 Fibre-reinforced plastic composites. Determination of open-hole compression strength
BS ISO 16573:2015 Steel. Measurement method for the evaluation of hydrogen embrittlement resistance of high strength steels
BS ISO 12815:2013 Fibre-reinforced plastic composites. Determination of plain-pin bearingstrength
BS EN 1052-2:1999 Methods of test for masonry - Determination of flexural strength
BS EN 1052-2:2016 Methods of test for masonry. Determination of flexural strength
BS EN 14617-2:2004 Agglomerated stone-Test methods-Part 2:Determination of flexural strength(bending)
BS EN 1926:2006 Natural stone test methods — Determination of uniaxial compressive strength
BS EN 1926:2007 Natural stone test methods - Determination of uniaxial compressive strength
BS EN 16318:2013+A1:2016 Fertilizers and liming materials. Determination of chromium(VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B)
BS EN 1052-3:2002 Methods of test for masonry — Part 3: Determination of initial shear strength
BS ISO 13779-4:2002 Implants for surgery - Hydroxyapatite - Determination of coating adhesion strength

Professional Standard - Coal, Stone Strength Testing

MT/T 1060-2008 Concrete strength testing in strument in coal mine
MT 170-1987 Method for determination of point load strength of coal and rock
MT/T 47-1987 Method for determination of unidirectional tensile strength of coal and rock
MT 47-1987 Method for determination of unidirectional tensile strength of coal and rock
MT/T 46-1987 Measurement of triaxial strength and deformation of coal and rocks
MT 46-1987 Method for determination of triaxial strength and deformation of coal and rock

Society of Automotive Engineers (SAE), Stone Strength Testing

SAE AMS2649D-2019 Etch Inspection of High Strength Steel Parts
SAE ARP4462A-2018 Barkhausen Noise Inspection for Detecting Grinding Burns in High Strength Steel Parts
SAE ARP4462-2010 BARKHAUSEN NOISE INSPECTION FOR DETECTING GRINDING BURNS IN HIGH STRENGTH STEEL PARTS
SAE ARP4462B-2019 Barkhausen Noise Inspection for Detecting Grinding Burns in High Strength Steel Parts

国家安全生产监督管理总局, Stone Strength Testing

MT/T 1060-2007 Mining concrete strength tester

Professional Standard - Traffic, Stone Strength Testing

JT/T 1166-2017 Non destructive testing for compressive strength of high strength concrete of bridges

RO-ASRO, Stone Strength Testing

STAS 6200/5-1971 SHAPED NATURAL STONE FOR BUILDING Methods of physical, mechanical and mineralogical test Determination of the compression strength
STAS 10275/4-1991 PLASTER Determination of bending resistance and compression strength
STAS 6200/6-1971 SHAPED NATURAL STONE FOR BUILDING Methods of physical, mechanical and mineralogical tests Detcrminalion [of the tcnsile strength
STAS 6200/5-1991 Natural stones for buildings. Compression stength determination and softening coefficient calculus
STAS 10929-1977 IRON ORES Determination of strength factors at drum testing
STAS 337/1-1988 WOOD Delermination of ultimatc strcngh in static bending
STAS SR ISO 3085:1995 Iron ores. Experimental methods for checking the precision of sampling
STAS 6257-1980 SOLID ELECTROINSULATING MATERIALS Methods of test for electric strength

Liaoning Provincial Standard of the People's Republic of China, Stone Strength Testing

DB21/T 2249-2014 On-the-spot rapid detection method of seam peel strength of asphalt waterproof membrane

工业和信息化部, Stone Strength Testing

YB/T 6040-2022 Method for determination of drop strength of fluorite pellets

未注明发布机构, Stone Strength Testing

BS EN 1926:2006(2007) Natural stone test methods — Determination of uniaxial compressive strength
JIS M 8711:2023 Iron ore sinter -- Determination of shatter strength

Association of German Mechanical Engineers, Stone Strength Testing

VDI/VDE 2616 Blatt 1-2012 Hardness testing of metallic materials
VDI/VDE 2616 Blatt 1-2002 Hardness testing of metallic materials

Xinjiang Provincial Standard of the People's Republic of China, Stone Strength Testing

DB65/T 4166-2018 Test method for the length and strength of wool bundles of sheep wool—Quick detection of wool bundle length and strength—Body test method

Professional Standard - Labor and Labor Safety, Stone Strength Testing

LD 83-1995 Rules of inspect for classification standard of labor intensity at physical work

AR-IRAM, Stone Strength Testing

IRAM OFICIAL 1539 N.I.O.-1950

GOSTR, Stone Strength Testing

GOST R 58527-2019 Wall materials. Methods for determination of ultimate compressive and bending strength

VN-TCVN, Stone Strength Testing

TCVN 6898-2001 Paper.Determination of surface strength.Wax pick method
TCVN 4646-1988 Sintered materials.Method for testing impact strength

Indonesia Standards, Stone Strength Testing

SNI 03-6758-2002 Test method for compressive strength of asphalt mixture
SNI 03-6798-2002 Procedure for test specimen production and treatment for compressive and tensile strength laboratory test of soil-cement
SNI ISO 3133:2010 Wood - Determination of ultimate strength in static bending
SNI 13-6660-2002 Determination for shear strength of rock by using of multistage triaxial test method

Ningxia Provincial Standard of the People's Republic of China, Stone Strength Testing

DB64/T 1647-2019 Technical specification for testing the compressive strength of high-strength concrete by rebound method

The American Road & Transportation Builders Association, Stone Strength Testing

AASHTO T 220-1966 Standard Method of Test for Determination of the Strength of Soil-Lime Mixtures

Military Standard of the People's Republic of China-General Armament Department, Stone Strength Testing

GJB 7368-2011 Measurement of spall strength of metallic materials
GJB 8645-2015 Calibration procedures for alternating magnetic induction intensity measuring coils

CU-NC, Stone Strength Testing

NC 54-06-1985 Construction Materials and Prodjcts. Hydrated Lime and Límestones. Determination of Humidity
NC 54-327-1985 Constructlon Materials and Products Limes and Limestones, Photemetric Determination of Phosphorus

Professional Standard - Earthquake, Stone Strength Testing

DB/T 28-2008 Calibration code of measuring instruments for magnetic induction of low field

Professional Standard - Recommended Standards for Engineering Construction, Stone Strength Testing

CECS 03-1988 TECHNICAL SPECIFICATION FOR TESTING CONCRETE STRENGTH WITH DRILLED CORE
CECS 03-2007 Technical specification for testing concrete strength with drilled core
CECS 69-1994 TECHNICAL SPECIFICATION FOR INSPECTION OF CONCRETE STRENGTH BY PULL-OUT POST-INSERT METHOD
CECS 278-2010 Technical specification for testing of concrete compressive strength by shear-pressure method

National Metrological Technical Specifications of the People's Republic of China, Stone Strength Testing

JJF 1372-2012 Calibration Specification for Instrument of Testing Mortar-strength by Penetration Resistance Method

National Metrological Verification Regulations of the People's Republic of China, Stone Strength Testing

JJG(机械) 7-1990 Verification rules for single particle compressive strength tester

SE-SIS, Stone Strength Testing

SIS SS 16 13 52-1986 Plastics - Determination of Izod impact strength of rigid materials
SIS SS 16 92 16-1979 Flexible cellular materials — Determination of tear resistance
SIS 16 92 13-1975 hlexiDle cellular materials, ueterminazion or compression sei
SIS SS 16 13 51-1986 Plastics - Determination of Charpy impact strength of rigid materials

CEN - European Committee for Standardization, Stone Strength Testing

EN 14151:2010 Geosynthetics - Determination of burst strength

(U.S.) Ford Automotive Standards, Stone Strength Testing

FORD FLTM BN 119-01-2013 DETERMINATION OF SEAM STRENGTH OF TEXTILE TRIM MATERIALS
FORD FLTM EU BN 017-2-2001 DETERMINATION OF TENSILE STRENGTH OF TRIM MATERIALS AFTER AGEING

Hebei Provincial Standard of the People's Republic of China, Stone Strength Testing

DB13/T 5157-2019 Straightness and roundness detection of titanium and titanium alloy bars
DB13/T 5385-2021 Technical requirements for robot detection of concrete compressive strength

Professional Standard - Railway, Stone Strength Testing

TB 10426-2004 Specification for testing the strength of concrete for railway engineering structures
TB 10426-2019 Specification for testing the strength of concrete for railway engineering structures

Professional Standard - Military and Civilian Products, Stone Strength Testing

WJ 2283-1995 Verification rules for activated carbon and impregnated carbon strength tester

Anhui Provincial Standard of the People's Republic of China, Stone Strength Testing

DB34/T 233-2022 Technical specification for testing the compressive strength of mortar by penetration method
DB34/T 569-2022 Technical specification for testing the compressive strength of concrete by shear compression method

ES-AENOR, Stone Strength Testing

UNE 56-542-1988

AASHTO - American Association of State Highway and Transportation Officials, Stone Strength Testing

T 220-1966 Standard Method of Test for Determination of the Strength of Soil-Lime Mixtures

Guangdong Provincial Standard of the People's Republic of China, Stone Strength Testing

DB44/T 1100.2-2012 Test methods for artificial stone: Part 2 Determination of bending strength

Yunnan Provincial Standard of the People's Republic of China, Stone Strength Testing

DB53/T 715-2015 Technical specification for testing the compressive strength of concrete by pull-off method