ZH
RU
ES

Prepackaging and finalized packaging

Prepackaging and finalized packaging, Total:185 items.

In the international standard classification, Prepackaging and finalized packaging involves: Farming and forestry, Materials for aerospace construction, Prepackaged and prepared foods, Packaging and distribution of goods in general, Components for aerospace construction, Aerospace engines and propulsion systems, Cases. Boxes. Crates, Packaging machinery, Freight distribution of goods, Aerospace fluid systems and components, Aircraft and space vehicles in general, Packaging materials and accessories, Sacks. Bags, Meat, meat products and other animal produce, Seals, glands, Cans. Tins. Tubes, Rubber and plastics products, Gas and steam turbines. Steam engines, Environmental protection, Metrology and measurement in general, Wastes, Test conditions and procedures in general, Fasteners, Nuclear energy engineering, Food products in general, Products of the textile industry, Protective equipment, Tobacco, tobacco products and related equipment, Iron and steel products, Protection against dangerous goods, Measurement of volume, mass, density, viscosity, Measurement of force, weight and pressure, Water quality, Textile machinery, Fruits. Vegetables, Applications of information technology, General methods of tests and analysis for food products.

Xinjiang Provincial Standard of the People's Republic of China, Prepackaging and finalized packaging

DB65/T 3294-2011 Packaging and Labeling of Prepackaged Korla Fragrant Pears

Professional Standard - Agriculture, Prepackaging and finalized packaging

DBN6528/T 006-2003 Packaging and Labeling of Prepackaged Korla Fragrant Pears
2兽药典三部-2015 General Chapter 3002 Labeling, instructions and packaging regulations for veterinary biological products
GB/T 15205-1994 Determination method of germanium in polyester resin for food packaging and its molded products

United States Navy, Prepackaging and finalized packaging

NAVY MIL-P-18493 REINST NOTICE 2-1989 PACKING, PREFORMED, CARBON; AND CARBON STOCK, PACKING
NAVY MIL-P-18493-1955 PACKING, PREFORMED, CARBON; AND CARBON STOCK, PACKING
NAVY MIL-PRF-32287 A-2011 PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT
NAVY QPL-32287 NOTICE 1-2010 Packing, Preformed, Petroleum Hydraulic Fluid Resistant
NAVY MIL-G-81559 C-1984 GYROSCOPE ASSEMBLIES AND ATTITUDE AND DIRECTIONAL REFERENCE INSTRUMENTS FOR AIRCRAFT; PACKAGING OF
NAVY MIL-G-81559 C NOTICE 1-1996 GYROSCOPE ASSEMBLIES AND ATTITUDE AND DIRECTIONAL REFERENCE INSTRUMENTS FOR AIRCRAFT; PACKAGING OF [Use In Lieu Of: NAVY MIL-G-0081559 B]

Society of Automotive Engineers (SAE), Prepackaging and finalized packaging

SAE AMS2817F-2008 Packaging and Identification, Preformed Packings
SAE AS3085-2006 PACKING, PREFORMED - AMS 7280, ‘O’ RING
SAE AS3085A-2012 Packing, Preformed - AMS 7280 - O Ring
SAE AS3084A-2012 Packing, Preformed - AMS 7280 - Seal
SAE AS83461/1-2009 Packing, Preformed - M83461 O-Ring
SAE AS28775A-2008 Packing, Preformed MS28775 O-Ring
SAE AS9385-1999 PACKING, PREFORMED, AMS 7267, O-RING FSC 5330
SAE AS83461/2A-2014 O-RING M83461 STRAIGHT THREAD TUBE FITTING BOSS
SAE AS5728-2009 Packing, Preformed, O-Ring Molded from AMS 7268 Material
SAE AS9902B-2008 Plug, Machine Thread Drilled, Preformed Packing AS8879 Thread (UNS S34700)
SAE MA2010-1987 Packing, Preformed - O-Ring Seal, Standard Sizes and Size Codes, Metric
SAE MA3445-1988 PACKING, PREFORMED O-RING SEAL, FLUOROCARBON (MIL-R-83485, TYPE I), METRIC FSC 5330
SAE AMS-P-83461/1A-2002 Packing, Preformed, Petroleum Hydraulic Fluid Resistant Improved Performance at 275°F (135°C) Sizes and Tolerances

Group Standards of the People's Republic of China, Prepackaging and finalized packaging

T/ARAA 008-2023 Specification for Packaging and Marking of pre-packaged Aksu apples
T/CDMF 006-2022 Specification for planting and processing of Ingredients (sour beans and chopped chilies) for Pre-made Changde Mifen
T/CAQI 159-2020 Sampling and Real-time RT-PCR assay for detection of SARS-CoV-2 in food and food packaging surface

Defense Logistics Agency, Prepackaging and finalized packaging

DLA MS28900 REV A (1)-2003 PACKING, PREFORMED, FOR ELECTRICAL USE
DLA MS28900 REV A NOTICE 1-1998 PACKING, PREFORMED, FOR ELECTRICAL USE
DLA MS28900 REV A-1986 PACKING, PREFORMED, FOR ELECTRICAL USE
DLA A-A-55549 VALID NOTICE 2-2006 PACKING, PREFORMED, ROUND (FOR USE WITH WAVEGUIDE FLANGES)
DLA A-A-55549 VALID NOTICE 1-2001 PACKING, PREFORMED, ROUND (FOR USE WITH WAVEGUIDE FLANGES)
DLA A-A-55549-1994 PACKING, PREFORMED, ROUND (FOR USE WITH WAVEGUIDE FLANGES)
DLA MS21367 REV G VALID NOTICE 1-2012 Coils, Radio Frequency, Encapsulated, Fixed, Micro-Miniature, Shielded (Iron Core) Types LT10K354 to LT10K383 Incl.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Prepackaging and finalized packaging

GB/T 16716.3-2010 Packaging and packaging waste.Part 3:Prevention by source reduction
GB/T 7311-2008 Classification and editorial nominating method for packaging machinery
GB/T 5009.127-2003 Determination of germanium in polyester resin and products for food packaging
GB/T 2101-1989 General requirements of acceptance,packaging,marking,and certification for section steel
GB/T 2101-2008 General regulations on section steel acceptance, packaging, marking and quality certificate
GB/T 5009.101-2003 Determination of antimony in polyester resin and products for food containers and packaging materials

German Institute for Standardization, Prepackaging and finalized packaging

DIN 55540-1:1978-05 Testing of packaging; determining the filling ratio of standard capacity prepacks; prepacks whose contents are indicated by weight
DIN 32-3:1981 Packaging; means of packaging for pre-packages; determination of measures for boxes for tubes
DIN 55540-1 Beiblatt 1:1979 Testing of packaging; determining the filling ratio of prepacks; form relating to coefficients of variation for the density of the packaged material and for the package for adhesives and allied products
DIN EN 415-2:2022-04 Safety of packaging machines - Part 2: Packaging machines for pre-formed rigid containers; German and English version prEN 415-2:2022 / Note: Date of issue 2022-02-25*Intended as replacement for DIN EN 415-2 (2000-10).
DIN EN 415-2:2000-10 Safety of packaging machines - Part 2: Pre-formed rigid container packaging machines; German version EN 415-2:1999 / Note: To be replaced by DIN EN 415-2 (2022-04).
DIN 55540-1 Beiblatt 1:1979-01 Testing of packaging; determining the filling ratio of prepacks; form relating to coefficients of variation for the density of the packaged material and for the package for adhesives and allied products
DIN 55540-1:1978 Testing of packaging; determining the filling ratio of standard capacity prepacks; prepacks whose contents are indicated by weight
DIN 55540-1 Bb.4:1980 Package testing; stipulation of filling rate of pre-packages, form with coefficient of variation of the density of products and of the package for cleaning products
DIN 55540-1 Bb.1:1979 Testing of packaging; determining the filling ratio of prepacks; form relating to coefficients of variation for the density of the packaged material and for the package for adhesives and allied products
DIN 55540-1 Bb.3:1988 Package testing; stipulation of filling rate of pre-packages, form with coefficient of variation of the density of products and of the package for washing and cleaning products and similar products
DIN EN 13027:2001 Packaging - Light-gauge metal packaging - Open top round cans defined by their nominal gross-lidded capacity; German version EN 13027:2001
DIN 55540-1 Bb.2:1980 Package testing; stipulation of filling rate of pre-packages, form with coefficient of variation of the density of products and of the package for plants protection products and similar products
DIN EN 13027:2001-04 Packaging - Light-gauge metal packaging - Open top round cans defined by their nominal gross-lidded capacity; German version EN 13027:2001
DIN 55540-1 Beiblatt 4:1980-04 Package testing; stipulation of filling rate of pre-packages, form with coefficient of variation of the density of products and of the package for cleaning products
DIN 10050-7:1973 Testing of butter wrappers, determination of water soluble components of the surface of the wrapper contacting butter
DIN EN 13028:2001-04 Packaging - Light-gauge metal packaging - Round open-top cans for beverage products with added gas, defined by their nominal filling volumes; German version EN 13028:2001
DIN 55540-1 Beiblatt 2:1980-04 Package testing; stipulation of filling rate of pre-packages, form with coefficient of variation of the density of products and of the package for plants protection products and similar products
DIN 8784:1993 Beverage filling and packaging technology; minimum and order related machine specification
DIN 55540-1 Beiblatt 3:1988-02 Package testing; stipulation of filling rate of pre-packages, form with coefficient of variation of the density of products and of the package for washing and cleaning products and similar products
DIN EN 13028:2001 Packaging - Light-gauge metal packaging - Round open-top cans for beverage products with added gas, defined by their nominal filling volumes; German version EN 13028:2001
DIN 6113-7:2010-08 Packaging - Radio-frequency identification of rigid industrial packaging, positioning and system parameters for passive RFID chips - Part 7: Composite intermediate bulk container (IBC)
DIN EN 15766:2009-08 Packaging - Flexible aluminium tubes - Test methods to determine the polymerization of the internal coating with acetone; German version EN 15766:2009
DIN 10050-5:1999 Testing of butter wrappers - Part 5: Determination of fat stability of the surface contacting the butter during continuous charge
DIN 6113-7:2010 Packaging - Radio-frequency identification of rigid industrial packaging, positioning and system parameters for passive RFID chips - Part 7: Composite intermediate bulk container (IBC)

U.S. Military Regulations and Norms, Prepackaging and finalized packaging

ARMY MIL-DTL-2156 D-2010 CHARGE, DEMOLITION, SHAPED, 15 LB. - M2A4 LOADING, ASSEMBLING AND PACKING
ARMY MIL-DTL-13139 F-2010 CHARGE, DEMOLITION, SHAPED, 15 LB.朚2A4 PARTS FOR
ARMY MIL-G-13706 D VALID NOTICE 2-1999 MILITARY SPECIFICATION GRENADE, HAND, OFFENSIVE, MK3A2 WITH M206A2 LOADING, ASSEMBLING AND PACKING
ARMY MIL-G-13706 D-1975 GRENADE, HAND, OFFENSIVE, MK3A2 WITH M206A2 LOADING, ASSEMBLING AND PACKING
ARMY MIL-C-46919 A NOTICE 2-1996 CARTRIDGE, ILLUMINATION, M301A2 WITH FUZE, TIME, M84 FOR 81MM MORTARS LOADING, ASSEMBLING AND PACKING
ARMY MIL-C-46919 A VALID NOTICE 1-1990 CARTRIDGE, ILLUMINATION, M301A2 WITH FUZE, TIME, M84 FOR 81MM MORTARS LOADING, ASSEMBLING AND PACKING
ARMY MIL-C-46919 A (1)-1981 CARTRIDGE, ILLUMINATION, M301A2 WITH FUZE, TIME, M84 FOR 81MM MORTARS LOADING, ASSEMBLING AND PACKING
ARMY MIL-C-46919 A-1965 CARTRIDGE, ILLUMINATION, M301A2 WITH FUZE, TIME, M84 FOR 81MM MORTARS LOADING, ASSEMBLING AND PACKING
ARMY MIL-DTL-46594 C-2011 CHARGE, DEMOLITION, SHAPED, 40 LB. M3A1 LOADING, ASSEMBLING AND PACKING
ARMY MIL-C-60380 A NOTICE 2-1997 CARTRIDGE, 105MM, SEMI FIXED, SMOKE, WP, M60 LOADING, ASSEMBLING AND PACKING
ARMY MIL-C-60380 A VALID NOTICE 1-1987 CARTRIDGE, 105MM, SEMI FIXED, SMOKE, WP, M60 LOADING, ASSEMBLING AND PACKING
ARMY MIL-C-60380 A (1)-1974 CARTRIDGE, 105MM, SEMI FIXED, SMOKE, WP, M60 LOADING, ASSEMBLING AND PACKING
ARMY MIL-C-60380 A-1972 CARTRIDGE, 105MM, SEMI FIXED, SMOKE, WP, M60 LOADING, ASSEMBLING AND PACKING
ARMY MIL-A-46655 B NOTICE 2-1996 ATTACHMENTS, TOW AND PUSH FOR DEMOLITION KIT, PROJECTED CHARGE, M157, PARTS FOR AND PACKING
ARMY MIL-A-46655 B VALID NOTICE 1-1988 ATTACHMENTS, TOW AND PUSH FOR DEMOLITION KIT, PROJECTED CHARGE, M157, PARTS FOR AND PACKING
ARMY MIL-A-46655 B (2)-1981 ATTACHMENTS, TOW AND PUSH FOR DEMOLITION KIT, PROJECTED CHARGE, M157, PARTS FOR AND PACKING
ARMY MIL-A-46655 B-1965 ATTACHMENTS, TOW AND PUSH FOR DEMOLITION KIT, PROJECTED CHARGE, M157, PARTS FOR AND PACKING
ARMY MIL-C-50252 NOTICE 2-1997 CARTRIDGE, SEMI-FIXED, 105MM, APERS-T XM546E2, LOADING, ASSEMBLING AND PACKING
ARMY MIL-C-50252 VALID NOTICE 1-1987 CARTRIDGE, SEMI-FIXED, 105MM, APERS-T XM546E2, LOADING, ASSEMBLING AND PACKING
ARMY MIL-C-50252 (1)-1973 CARTRIDGE, SEMI-FIXED, 105MM, APERS-T XM546E2, LOADING, ASSEMBLING AND PACKING
ARMY MIL-C-50252-1971 CARTRIDGE, SEMI-FIXED, 105MM, APERS-T XM546E2, LOADING, ASSEMBLING AND PACKING
ARMY MIL-C-70532 (9)-2002 CARTRIDGE, 105MM, HE, RA, XM913 AND XM927 (WITH WARHEAD AND MOTOR BODY) LOADING, ASSEMBLING AND PACKING
ARMY MIL-C-70532 NOTICE 1-1998 CARTRIDGE, 105MM, HE, RA, XM913 AND XM927 (WITH WARHEAD AND MOTOR BODY) LOADING, ASSEMBLING AND PACKING
ARMY MIL-C-70532-1990 CARTRIDGE, 105MM, HE, RA, XM913 AND XM927 (WITH WARHEAD AND MOTOR BODY) LOADING, ASSEMBLING AND PACKING
ARMY MIL-DTL-45144 E-2009 FUSE, BLASTING, TIME ?M700, AND DUMMY FUSE, BLASTING, TIME - INERT LOADING, ASSEMBLING AND PACKING
ARMY MIL-S-3139 NOTICE 1-1997 SHELL, FIXED, CHEMICAL, M64 FOR 75-MM GUNS, M132 FOR 76-MM GUNS, M313 FOR 90MM GUNS, AND SHELL, SEMI-FIXED, CHEMICAL, M64 FOR 75MM HOWITZERS, M60 FOR 105MM HOWITZERS, ASSEMBLING, MARKING AND PACKING
ARMY MIL-S-3139 (1)-1965 SHELL, FIXED, CHEMICAL, M64 FOR 75-MM GUNS, M132 FOR 76-MM GUNS, M313 FOR 90MM GUNS, AND SHELL, SEMI-FIXED, CHEMICAL, M64 FOR 75MM HOWITZERS, M60 FOR 105MM HOWITZERS, ASSEMBLING, MARKING AND PACKING
ARMY MIL-S-3139-1950 SHELL, FIXED, CHEMICAL, M64 FOR 75-MM GUNS, M132 FOR 76-MM GUNS, M313 FOR 90MM GUNS, AND SHELL, SEMI-FIXED, CHEMICAL, M64 FOR 75MM HOWITZERS, M60 FOR 105MM HOWITZERS, ASSEMBLING, MARKING AND PACKING

Danish Standards Foundation, Prepackaging and finalized packaging

DS/EN 415-2:2000 Packaging machines safety - Part 2: Pre-formed rigid container packaging machines
DS/EN 13027:2001 Packaging - Light gauge metal packaging - Open-top cans defined by their nominal gross-lidded capacity
DS/EN 13028:2001 Packaging - Light gauge metal packaging - Round open-top cans for beverage products with or without added gas, defined by their nominal filling volumes.
DS/EN 13428:2006 Packaging - Requirements specific to manufacturing and composition - Prevention by source reduction

Lithuanian Standards Office , Prepackaging and finalized packaging

LST EN 415-2-2001 Packaging machines safety - Part 2: Pre-formed rigid container packaging machines
LST EN 13027-2002 Packaging - Light-gauge metal packaging - Open-top round cans defined by their nominal gross-lidded capacity
LST EN 13028+AC-2002 Packaging - Light-gauge metal packaging - Round open-top cans for beverage products with added gas, defined by their nominal filling volumes
LST EN 13428-2004 Packaging - Requirements specific to manufacturing and composition - Prevention by source reduction

Association Francaise de Normalisation, Prepackaging and finalized packaging

NF EN 415-2:2000 Sécurité des machines d'emballage - Partie 2 : machines d'emballage pour contenants rigides préformés
NF H94-001-2*NF EN 415-2:2000 Packaging machines safety - Part 2 : pre-formed rigid container packaging machines
NF H00-082:2017 Emballages - Emballages d'expédition complets et pleins - Essai de choc horizontal programmé
NF ISO 11040-7:2015 Seringues préremplies - Partie 7 : système d'emballage pour les seringues stérilisées prêtes à l'emploi et préremplissables
NF P16-800-3:2013 Small wastewater treatment systems for up to 50 PT - Part 3: packaged and/or site assembled domestic wastewater treatment plants
NF X30-500:2011 Packaging for medicinal care waste - Boxes and small collectors for perforating waste - Specifications and tests.

AENOR, Prepackaging and finalized packaging

UNE-EN 415-2:2000 Packaging machines safety. Part 2: Pre-formed rigid containers packaging machines.
UNE-EN 13027:2004 Packaging - Light-gauge metal packaging - Open-top round cans defined by their nominal gross-lidded capacity
UNE-EN 13028:2002 Packaging - Light-gauge metal packaging - Round open-top cans for beverage products with added gas, defined by their nominal filling volumes
UNE-EN 13428:2005 Packaging - Requirements specific to manufacturing and composition - Prevention by source reduction

Korean Agency for Technology and Standards (KATS), Prepackaging and finalized packaging

KS T 1108-2007(2022) Safety of packaging machines－Part 2：Pre-formed rigid container packaging machines
KS T 1303-2022 Determination of ratio of spatial volume to total packaging volume for commercial packaging(consumer packaging)
KS T 1108-2007 Safety of packaging machines－Part 2：Pre-formed rigid container packaging machines

SAE - SAE International, Prepackaging and finalized packaging

SAE AS83461/1A-2015 Packing, Preformed - M83461 O-Ring
SAE AS83461/2B-2016 PACKING@ PREFORMED@ MS83461 STRAIGHT THREAD TUBE FITTING BOSS
SAE AS83461/2-2009 PACKING@ PREFORMED@ MS83461 STRAIGHT THREAD TUBE FITTING BOSS
SAE AS9902A-2003 Plug@ Machine Thread Drilled@ Preformed Packing MIL-S-8879 Thread
SAE AS9902-1999 Plug@ Machine Thread Drilled@ Preformed Packing MIL-S-8879 Thread
SAE MA3445A-2019 PACKING, PREFORMED O-RING SEAL, FLUOROCARBON (MIL-R-83485, TYPE I), METRIC FSC 5330
SAE AMS-P-25732A-2003 Packaging@ Preformed@ Petroleum Hydraulic Fluid Resistant@ Limited Service at 275°F (135°C)
SAE AMS-P-25732-1998 Packaging@ Preformed@ Petroleum Hydraulic Fluid Resistant@ Limited Service at 275 Degrees F (135 Degrees C)
SAE AMS-P-83461/1-1999 Packing@ Preformed@ Petroleum Hydraulic Fluid Resistant Improved Performance at 275 Degrees F (135 Degrees C) Sizes and Tolerances

European Committee for Standardization (CEN), Prepackaging and finalized packaging

prEN 415-2 Safety of packaging machines - Part 2: Packaging machines for pre-formed rigid containers
EN 415-2:1999 Packaging machines safety - Part 2: Pre-formed rigid container packaging machines
EN 13027:2001 Packaging - Light-gauge metal packaging - Open-top round cans defined by their nominal gross-lidded capacity
EN 13028:2001 Packaging - Light-gauge metal packaging - Round open-top cans for beverage products with added gas, defined by their nominal filling volumes

British Standards Institution (BSI), Prepackaging and finalized packaging

22/30426665 DC BS EN 415-2. Safety of packaging machines. Part 2. Packaging machines for pre-formed rigid containers
BS EN 1086:1996 Sacks for the transport of food aid - Recommendations on the selection of type of sack and the liner in relation to the product to be packed
BS EN 13027:2001 Packaging - Light-gauge metal packaging - Open-top round cans defined by their nominal gross-lidded capacity
BS EN 13028:2001 Packaging - Light-gauge metal packaging - Round open-top cans for beverage products with or without added gas, defined by their nominal filling volumes
BS 984:1990 Method for determination of net mass of retail packages of knitting and rug yarns
BS EN 353-1:2002 Personal protective equipment against falls from a height - Guided type fall arresters including a rigid anchor line
BS EN 353-2:2002 Personal protective equipment against falls from a height - Guided type fall arresters including a flexible anchor line

HU-MSZT, Prepackaging and finalized packaging

MSZ KGST 2015-1979

Hubei Provincial Standard of the People's Republic of China, Prepackaging and finalized packaging

DB42/T 2105-2023 Prepackaged freshwater fish processing and cold chain logistics specifications

ZA-SANS, Prepackaging and finalized packaging

SANS 289:2008 Labelling requirements for prepackaged products (prepackages) and general requirements for the sale of goods subject to legal metrology control
SANS 458:2005 Tolerances permitted for the accuracy of measurements of products (including prepackaged products) in terms of legal metrology legislation
SANS 1841:2008 Control of the quantity of contents in prepacked packages within the prescriptions of legal metrology legislation

Aerospace Industries Association, Prepackaging and finalized packaging

AIA NAS 3449-1971 Hoses/Tubes, Preformed or Straight, Multiple Packaging of (Rev. 1)

Aerospace Industries Association/ANSI Aerospace Standards, Prepackaging and finalized packaging

AIA/NAS NAS 854-1983 Hazardous Material Packaging and Safety Data Sheet Preparation (Rev. 1)
AIA/NAS NAS 617-1978 Packing, Preformed, Straight Thread Tube Fitting Boss, Synthetic Lubricant Resistant (Rev. 2)
AIA/NAS NAS 1613-2002 Seal Element, Packing, Preformed, Ethylene Propylene Rubber Rev.5; FSC 5330
AIA/NAS NAS617-2010 PACKING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, SYNTHETIC LUBRICANT RESISTANT Rev 3
AIA/NAS NAS 1611-2005 Packing, Ethylene Propylene Preformed O-Ring Phosphate Ester Resistant (-65 Degrees F to 250/300 Degrees F) Rev. 10; FSC 5331

AIA/NAS - Aerospace Industries Association of America Inc., Prepackaging and finalized packaging

NAS3449-1971 Hoses/Tubes@ Preformed or Straight@ Multiple Packaging of (Rev 1)

国家市场监督管理总局、中国国家标准化管理委员会, Prepackaging and finalized packaging

GB/T 13675-2021 Aero-derivative gas turbines preparation for packing and shipping

Guangxi Provincial Standard of the People's Republic of China, Prepackaging and finalized packaging

DB4502/T 0034-2022 Specifications for construction and renovation of prepackaged Liuzhou snail noodle processing plant
DB4502/T 0042-2022 Standards for classification and assessment of prepackaged snail powder business risk
DB4502/T 0010-2022 Prepackaged Liuzhou snail powder monopoly point and exhibition service management specification

U.S. Air Force, Prepackaging and finalized packaging

AIR FORCE QPL-AMS-P-5510-01 NOTICE 1-2008 Packing, Preformed, Straight Thread Tube Fitting Boss, Type I Hydraulic (-65 Degrees F to 160 Degrees F)
AIR FORCE QPL-25732-QPD-2010 PACKING, PERFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT, LIMITED SERVICE AT 275 DEG. F (135 DEG. C)
AIR FORCE QPL-AMS-P-5510-QPD -QPD-2009 Packing, Preformed, Straight Thread Tube Fitting Boss, Type I Hydraulic (-65 Degrees F to 160 Degrees F)
AIR FORCE QPL-25732-QPD-2011 Packing, Preformed, Petroleum Hydraulic Fluid Resistant, Limited Service at 275 Deg. F (135 Deg. C)
AIR FORCE QPL-25732-2012 Packing, Preformed, Petroleum Hydraulic Fluid Resistant, Limited Service at 275 Deg. F (135 Deg. C)
AIR FORCE QPL-AMS-P-5510-QPD-2011 Packing, Preformed, Straight Thread Tube Fitting Boss, Type I Hydraulic (-65 DEG. F TO 160 DEG. F)
AIR FORCE QPL-AMS-P-5510-01 (1)-2005 PACKING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, TYPE I HYDRAULIC (-65 DEGREES F TO 160 DEGREES F)
AIR FORCE QPL-AMS-P-5510-01-2005 PACKING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, TYPE I HYDRAULIC (-65 DEGREES F TO 160 DEGREES F)
AIR FORCE QPL-25732-18 (3)-2006 PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT, LIMITED SERVICE AT 275 DEGREES F (135 DEGREES C)
AIR FORCE QPL-25732-18-2003 PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT, LIMITED SERVICE AT 275 DEGREES F (135 DEGREES C)

RU-GOST R, Prepackaging and finalized packaging

GOST R 8.579-2001 State system for ensuring the uniformity of measurements. Requirements established for the quantity of prepackaged goods in packages of any kind during their manufacturing, packaging, selling or importing
GOST R 53740-2009 Resources saving. Packaging. Requirements specific to minimization, composition, manufacturing of package
GOST R 53754-2009 Resources saving. Packaging. Definitions and methods of calculation of efficiency of the recycling packaging as a secondary material resources

Taiwan Provincial Standard of the People's Republic of China, Prepackaging and finalized packaging

CNS 12993-2006 Packaging - Complete, filled transport packages and unit loads - Vibration tests at fixed low frequency

Professional Standard - Chemical Industry, Prepackaging and finalized packaging

HG/T 20579.3-1999 Technical Prescription on Packaging and Transporting of Model Products
HG/T 20579.3-1999（条文说明） Model design Finished product packaging and transportation technical regulations

American National Standards Institute （ANSI), Prepackaging and finalized packaging

ANSI N14.7-2013 Guidance for Packaging Type A Quantities of Radioactive Materials
ANSI/ASTM E2230:2013 Practice for Thermal Qualification of Type B Packages for Radioactive Material

Military Standard of the People's Republic of China-General Armament Department, Prepackaging and finalized packaging

GJB 4403A-2018 Conventional weapons and ammunition packaging finalization test procedures
GJB 4403-2002 Conventional weapons and ammunition packaging finalization test procedures
GJB 4609-1993*GJBz 20127.2-1993 Determination of basic parameters and inspection of appearance and packaging of false target design finalization test procedures

中华人民共和国国家卫生和计划生育委员会, Prepackaging and finalized packaging

GB 19304-2003 Hygienic specifications of factory for packing drinking water

YU-JUS, Prepackaging and finalized packaging

JUS Z.M3.035-1990 Packinq. Sacks made from thermoplastic flexible film. Vocabularv and tvpes

PT-IPQ, Prepackaging and finalized packaging

NP 299-1963 Liège mi?le, rebut et déchefa commercialement s?cs. Définitioins et emballage
I-1622-1981
NP 298-1963

IX-EU/EC, Prepackaging and finalized packaging

2001/171/EC CORR-2002 Corrigendum to Commission Decision establishing the conditions for a derogation for glass packaging in relation to the heavy metal concentration levels established in Directive 94/62/EC on packaging and packaging waste (Official Journal of the European Co

Professional Standard - Tobacco, Prepackaging and finalized packaging

YC/T 169.12-2002 Testing physical and chemical characteristics of tow for cigarette----Part 12: Packing and outward appearance
YC/T 169.12-2009 Determination of physical and chemical characteristics of tow for cigarette.Part 12:Packing and outward appearance
YC/T 374-2010 Printed cigarette carton and packet packaging papers.Conformity test for color fastness to light.Xenon arc fading lamp test

Professional Standard - Commodity Inspection, Prepackaging and finalized packaging

SN/T 0987.2-2001 Rules for the inspection of IBCs for export dangerous goods.Use appraisal
SN/T 3062.4-2011 Pachaking materials for terminally sterilized medical devices for import.Part 4:Requirements for materials and sterile barrier systems of importing medical device sterilization packaging
SN/T 0987.2-2014 Rules for the inspection of IBCs for export dangerous good.Part 2:Use appraisal

Aeronautical Radio Inc., Prepackaging and finalized packaging

ARINC 761-3-2006 Second Generation Aviation Satellite Communication System, Aircraft Installation Provisions 1997; Includes Supplements 1-3

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Prepackaging and finalized packaging

GB/T 2101-2017 General requirment of acceptance, packaging, marking and certification for section steel

American Society for Testing and Materials (ASTM), Prepackaging and finalized packaging

ASTM E2230-22 Standard Practice for Thermal Qualification of Type B Packages for Radioactive Material

CZ-CSN, Prepackaging and finalized packaging

CSN ISO 5238-2:1992 Textile machinery and accessories - Packages of yarns and intermediate products - Part 2: Forms of winding