ZH
RU
ES

Four methods of equipment inspection

Four methods of equipment inspection, Total:213 items.

In the international standard classification, Four methods of equipment inspection involves: Installations in buildings, Rotating machinery, Railway engineering in general, Surface treatment and coating, Woodworking equipment, Sensory analysis, Compressors and pneumatic machines, Refrigerating technology, Flexible drives and transmissions, Rubber and plastics products, Equipment for the chemical industry, Equipment for petroleum and natural gas industries, Fluid storage devices, Capacitors, Quality, Electrical accessories, Metalliferous minerals, Optoelectronics. Laser equipment, Vacuum technology, Linear and angular measurements, Applications of information technology, Road vehicle systems, Laboratory medicine, Rubber, Galvanic cells and batteries, Aids for disabled or handicapped persons, Medical equipment, Sports equipment and facilities, Agricultural machines, implements and equipment, Non-destructive testing, Telecommunication terminal equipment, Switchgear and controlgear, Meat, meat products and other animal produce, Electrical equipment for working in special conditions, Safety of machinery, Integrated circuits. Microelectronics, Lifting equipment, Wastes, Testing of metals, Radiation protection, Metrology and measurement in general, Fibre optic communications, Road engineering, Mobile services, Alarm and warning systems, Acoustics and acoustic measurements, Electrical wires and cables, Electromechanical components for electronic and telecommunications equipment, Protection of and in buildings, METROLOGY AND MEASUREMENT. PHYSICAL PHENOMENA, Textile fibres.


JP-NDIS, Four methods of equipment inspection

Association Francaise de Normalisation, Four methods of equipment inspection

  • NF D14-510:1987 Sanitary appliances. Dimensional checking. Test method.
  • NF D14-505:1987 Sanitary appliances. Aspect checking of enamelled surfaces. Test method.
  • NF D14-509:1985 Sanitary appliances. Continuity checking of enamel coating. Test methods.
  • NF ISO 13579-3:2013 Fours industriels et équipements associés - Méthode de mesure du bilan énergétique et de calcul de l'efficacité - Partie 3 : fours dormants de fusion pour l'aluminium
  • NF A09-421:1993 Non destructive testing. Infrared thermography. Methods for characterization of equipment.
  • NF L41-250*NF ISO 7258:1987 Polytetrafluoroethylene (ptfe) tubing for aerospace applications. Methods for the determination of the density and relative density.
  • NF H96-112-4:1999 Lifting devices for refuse collection. Part 4 : requirements for checking the lifting device and test methods.
  • NF M62-206:1984 Nuclear energy. Nuclear ventilation installations. Method of control of the scrubbing coefficient of iodine trap.
  • NF EN 61300-3-13:1998 Dispositifs d'interconnexion et composants passifs - Méthodes fondamentales d'essais et de mesures - Partie 3-13 : examens et mesures. Stabilité de contrôle d'un interrupteur pour fibres optiques
  • NF C23-564*NF EN 50104:2010 Electrical apparatus for the detection and measurement of oxygen - Performance requirements and test methods
  • NF EN 61300-3-8:1998 Dispositifs d'interconnexion et composants passifs - Méthodes fondamentales d'essais et de mesures - Partie 3-8 : examens et mesures. Immunité à l'éclairement extérieur
  • NF EN 61300-3-11:1998 Dispositifs d'interconnexion et composants passifs - Méthodes fondamentales d'essais et de mesures - Partie 3-1 : examens et mesures. Force d'accouplement et de désaccouplement
  • NF EN 12819:2019 Équipements et accessoires GPL - Inspection et requalification des réservoirs de capacité supérieure à 13 m³ pour gaz de pétrole liquéfiés (GPL)

Professional Standard - Commodity Inspection, Four methods of equipment inspection

  • SN/T 1656-2005 General checking method for the equipment used in inspection and quarantine
  • SN/T 2325-2009 Determination of 45 pesticides residues including azimsulfron,bensulfron-methyl,cinosulfron et al in foods for import and export.HPLC-MS/MS method
  • SN/T 3374.1-2012 Test methods for information technology equipment for import and export.Part 1:Measurement for the power consumption

RU-GOST R, Four methods of equipment inspection

  • GOST R 51194-1998 Brushes of electrical machines. Methods of dimensions examination
  • GOST R 50608-1993 Refrigerating equipment. Steel apparatus. Welded joints. Technical requirements and cheking methods
  • GOST 24848.1-1981 Variator V-belts for industrial equipment. Basic sizes and methods of control
  • GOST R 57766-2017 Chairs with medical equipment. Types, technical requirements and methods of control
  • GOST 31467-2012 Poultry meat, edible offal, and ready-to-cook poultry meat. Sampling methods and preparing of samples for examinations
  • GOST 28298-1989 Mine equipment earthing. Check methods and specifications
  • GOST ISO 14123-1-2000 Safety of machinery. Reduction of risks to health from hazardous substances emitted by machihery. Part 1. Principles and technical requirements
  • GOST 8.435-1981 State system for ensuring the uniformity of measurements. Neasuring set line building-out networks. Methods and means for checking

Korean Agency for Technology and Standards (KATS), Four methods of equipment inspection

  • KS R 9179-2003 Inspection of relay interlocking machines
  • KS Q ISO 5497-2003(2018)
  • KS C IEC 62629-13-1:2021 3D display devices — Part 13-1: Visual inspection methods for stereoscopic displays using glasses — Ghost image
  • KS C IEC TS 61430:2018 Secondary cells and batteries — Test methods for checking the performance of devices designed for reducing explosion hazards — Lead-acid starter batteries
  • KS E ISO 8541:2018 Manganese and chromium ores — Experimental methods for checking the bias of sampling and sample preparation
  • KS G ISO 20957-5:2009 Stationary training equipments-Part 5:Pedal crank training equipment, additional specific safety requipments and test methods
  • KS G ISO 20957-5:2014 Stationary training equipments — Part 5: Pedal crank training equipment — Additional specific safety requirements and test methods

HU-MSZT, Four methods of equipment inspection

RO-ASRO, Four methods of equipment inspection

  • STAS 11999-1983 Mining equipment CUTTER-LOADERS Checking methods
  • STAS 11959/3-1983 Fire fighting equipment PORTABLE EXTINGUISHERS Checking methods
  • STAS R 12500/1-1987 ULTRASONIC FLAW DETECTION Checking up methods of flaw detection equipments having in view aecepteuce
  • STAS 9804/2-1989 Refrigerating equipment OPEN TYPE PISTON REFRIGERATING COMPRESSORS AND SEMI-HERMETICAL PISTON MOTOR-COMPRESSORS Rules and methods for quality checking up

Professional Standard - Agriculture, Four methods of equipment inspection

Professional Standard - Electron, Four methods of equipment inspection

  • SJ/T 31045-1994 Requirements of readiness and methods of inspection and assessment for woodworking equipment
  • SJ/T 31373-1994 Requirements of readiness and methods of inspection and assessment for cleaning equipment
  • SJ/T 31053-1994 Requirements of readiness and methods of inspection and assessment for barrel plating equipment
  • SJ/T 31460-1994 Requirements of readiness and methods of inspection and assessment for electro-penetration equipment
  • SJ/T 31452-1994 Requirements of readiness and methods of inspection and assessment for water treating equipment
  • SJ/T 31317-1994 Requirements of readiness and methods of inspection and assessment for chemosynthesis lines
  • SJ/T 31316-1994 Requirements of readiness and methods of inspection and assessment for drawing, drying and firing devices
  • SJ/T 31319-1994 Requirements of readiness and methods of inspection and assessment for cadmium acetate units
  • SJ/T 31082-1994 Requirements of readiness and methods of inspection and assessment for vacuum coating equipment
  • SJ/T 31458-1994 Requirements of readiness and methods of inspection and assessment for hydrogen purification equipment
  • SJ/T 31126-1994 Requirements of readiness and methods of inspection and assessment for YL-1 MOCVD systems
  • SJ/T 31154-1994 Requirements of readiness and methods of inspection and assessment for automatic exhaust equipment
  • SJ/T 31043-1994 Requirements of readiness and methods of inspection and assessment for sand-blast and shot-blast equipment
  • SJ/T 31175-1994 Requirements of readiness and methods of inspection and assessment for grating aging devices
  • SJ/T 31464-1994 Integrity requirements and inspection and evaluation methods for boiler dust removal equipment
  • SJ/T 31173-1994 Requirements of readiness and methods of inspection and assessment for transmission aging devices
  • SJ/T 31051-1994 Integrity requirements and inspection and assessment methods for solution filtration equipment
  • SJ/T 31320-1994 Requirements of readiness and methods of inspection and assessment for cadmium electrodeposition units
  • SJ/T 31409-1994 Requirements of readiness and methods of inspection and assessment for box dry desulphurization equipment
  • SJ/T 31457-1994 Requirements of readiness and methods of inspection and assessment for ionized water exchange equipment
  • SJ/T 31129-1994 Requirements of readiness and methods of inspection and assessment for high/low temperature test equipment
  • SJ/T 31323-1994 Requirements of readiness and methods of inspection and assessment for rechargeable battery production facilities
  • SJ/T 31456-1994 Requirements of readiness and methods of inspection and assessment for eletrolysis water hydrogen and oxygen equipment
  • SJ/T 31407-1994 Requirements of readiness and methods of inspection and assessment for small air separation units
  • SJ/T 31387-1994 Requirements of readiness and methods of inspection and assessment for all-weather test equipment
  • SJ/T 31083-1994 Requirements of readiness and methods of inspection and assessment for DM-450A vacuum coating equipment
  • SJ/T 31453-1994 Requirements of readiness and methods of inspection and assessment for hydrogen low-pressure pressurizing equipment
  • SJ/T 31230-1994 Requirements of readiness and methods of inspection and assessment for H58 vacuum impregnating devices
  • SJ/T 31385-1994 Requirements of readiness and methods of inspection and assessment for P80-13 high-temperature aging equipment
  • SJ/T 31389-1994 Requirements of readiness and methods of inspection and assessment for P-3B high-temperature test equipment
  • SJ/T 31408-1994 Requirements of readiness and methods of inspection and assessment for atmospheric gas purification towers
  • SJ/T 31351-1994 Equipment integrity requirements and inspection and evaluation methods for refrigerator side panel production line
  • SJ/T 31313-1994 Requirements of readiness and methods of inspection and assessment for cylindrical dry battery production facilities
  • SJ/T 31231-1994 Requirements of readiness and methods of inspection and assessment for large vacuum impregnating devices for capacitors
  • SJ/T 31370-1994 Integrity requirements and inspection and assessment methods for automatic pipe bending equipment used in air conditioner production
  • SJ/T 31374-1994 Integrity requirements and inspection and assessment methods for automatic welding equipment used in air-conditioner production
  • SJ/T 31314-1994 Requirements of readiness and methods of inspection and assessment for polar plate battery production process facilities
  • SJ/T 31303-1994 Requirements of readiness and methods of inspection and assessment for aluminum electrolysis capacitor aluminum foil etching machines
  • SJ/T 31127-1994 Requirements of readiness and methods of inspection and assessment for MP010 multi-purpose solderability test apparatuses
  • SJ/T 31307-1994 Requirements of readiness and methods of inspection and assessment for aluminum electrolysis capacitor aluminum foil energizing machines
  • SJ/Z 9095.4-1987 Methods of measurement for radio equipment used in mobile services Part 4: SSB transmitter (A3A, A3H or A3J)

BELST, Four methods of equipment inspection

  • STB 1567-2005 Mechanical training vehicle. Requirements to the additional equipment and methods of check

工业和信息化部, Four methods of equipment inspection

  • SJ/T 31001-2016 General rules for equipment readiness
  • SJ/T 31083-2016 Vacuum coating equipment integrity requirements and inspection and assessment methods
  • SJ/T 31389-2016 High temperature test equipment integrity requirements and inspection and evaluation methods
  • SJ/T 31387-2016 Constant humidity and heat test equipment integrity requirements and inspection and evaluation methods

CZ-CSN, Four methods of equipment inspection

  • CSN 35 6581-1987 Equipmcnt for checking the statě of fuelelement cans (of nuclear reactors). Specifications and testing methods

AENOR, Four methods of equipment inspection

  • UNE 68097:1990 SOWING EQUIPMENT. SEED DRILLS FOR SOWING IN LINES. TEST METHODS
  • UNE 68070:1989 EQUIPMENT FOR OLIVE CULTIVATION. HYDRAULIQUE PRESS SYSTEM FOR OBTAINING OLIVE OIL. TEST METHOD
  • UNE-EN 61300-3-20:2002 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-20: Examinations and measurements - Directivity of fibre optic branching devices.
  • UNE 68021:1989 EQUIPMENT FOR OLIVE CULTIVATION. CONTINUOUS SYSTEM BY CENTRIFUGATION FOR OBTAINING OLIVE OIL. TEST METHOD
  • UNE-EN 60512-1-3:1999 ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 1: GENERAL EXAMINATION. SECTION 3: TEST 1C - ELECTRICAL ENGAGEMENT LENGTH

API - American Petroleum Institute, Four methods of equipment inspection

  • API RPRI P1-1948 RECOMMENDED PRACTICES FOR REFINERY INSPECTIONS PART I-PROCESS EQUIPMENT
  • API RPRI P3-1950 RECOMMENDED PRACTICES FOR REFINERY INSPECTIONS PART III - FIRE-PROTECTION EQUIPMENT
  • API BULL 1501-1965 THE FILTRATION OF AND WATER REMOVAL FROM AVIATION FUELS SOURCES OF DIRT AND WATER-METHODS OF DETECTION AND REMOVAL-MAINTENANCE OF EQUIPMENT (FOURTH EDITION)
  • API RP 8B-2014 Recommended Practice for Procedures for Inspections@ Maintenance@ Repair@ and Remanufacture of Hoisting Equipment (EIGHTH EDITION)

Professional Standard - Chemical Industry, Four methods of equipment inspection

  • HG/T 3174-2002 Fabrication and inspection method for High pressure urea equipment selective corrosion and metallographic examination on the urea grade extra low carbon Cr-Ni-Mo austenitic stainless steel
  • HG/T 3175-2002 Fabrication and inspection method for High pressure urea equipment ultrasonic examination(UT) on the strip overlay welds of stainless steel

GB-REG, Four methods of equipment inspection

  • REG 7 CFR PART 3300-2012 AGREEMENT ON THE INTERNATIONAL CARRIAGE OF PERISHABLE FOODSTUFFS AND ON THE SPECIAL EQUIPMENT TO BE USED FOR SUCH CARRIAGE (ATP); INSPECTION, TESTING, AND CERTIFICATION OF SPECIAL EQUIPMENT

PL-PKN, Four methods of equipment inspection

  • PN H54557-1989 Foundry machinery and plant Core-making machines Blowing and core shooting machines Methods for checking

British Standards Institution (BSI), Four methods of equipment inspection

  • BS IEC 62629-13-1:2017 3D display devices - Visual inspection methods for stereoscopic displays using glasses. Ghost image
  • PD ISO/TR 21254-4:2011 Lasers and laser-related equipment. Test methods for laser-induced damage threshold. Inspection, detection and measurement
  • PD ISO/TS 4240-1:2023 Fine bubble technology. Environmental applications. Inspection method using online particle counter in dissolved air flotation (DAF) plant
  • PD IEC/TR 61430:1997 Secondary cells and batteries. Test methods for checking the performance of devices designed for reducing explosion hazards. Lead-acid starter batteries
  • BS EN 50104:2010 Electrical apparatus for the detection and measurement of oxygen. Performance requirements and test methods
  • BS EN 50104:2019+A1:2023 Electrical equipment for the detection and measurement of oxygen. Performance requirements and test methods
  • BS EN 50104:1999 Electrical apparatus for the detection and measurement of oxygen. Performance requirements and test methods
  • BS EN 50104:2019 Electrical equipment for the detection and measurement of oxygen. Performance requirements and test methods
  • BS EN 14278-1:2005 Textiles - Determination of cotton fibre stickiness - Method using a manual theromodetection device
  • BS EN 14278-1:2004 Textiles-Determination of cotton fibre stickiness-Part 1:Method using a manual thermodetection device

YU-JUS, Four methods of equipment inspection

  • JUS M.C3.365-1989 Plain bearings. Methods of dimensional control. Peripheral . leugth checking of thin-walled half bearings

ES-UNE, Four methods of equipment inspection

  • UNE 202009-28:2020 Methodology for verification and inspection of low voltage electrical installations at communal facilities.
  • UNE-EN 12817:2020 LPG Equipment and accessories - Inspection and requalification of LPG pressure vessels up to and including 13 m³
  • UNE-EN ISO 10052:2022 Acoustics - Field measurements of airborne and impact sound insulation and of service equipment sound - Survey method (ISO 10052:2021)

PT-IPQ, Four methods of equipment inspection

IT-UNI, Four methods of equipment inspection

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Four methods of equipment inspection

  • GB/T 27431-2023 Methodological guidance for period verification of measuring equipment during conformity assessment
  • GB/T 25151.2-2010 Fabrication and inspection method for high pressure urea equipment.Part 2:Selective corrosion examination and metallography examination for ultra low-carbon chromated nickel molybdenum austenitic stainless steel of urea grade
  • GB/T 32293-2015 Vacuum technology.Selection of leak test methods for vacuum equipment
  • GB/T 24277-2009 A method for assessing the short-circuit withstand.Strength of partially type-tested assemblies(PTTA)
  • GB/T 28266-2012 Non-destructive testing of pressure equipment.Qualification of radiographic film digitization systems

American Society for Testing and Materials (ASTM), Four methods of equipment inspection

  • ASTM E1934-99a Standard Guide for Examining Electrical and Mechanical Equipment with Infrared Thermography
  • ASTM E1934-99a(2014) Standard Guide for Examining Electrical and Mechanical Equipment with Infrared Thermography
  • ASTM E1934-99a(2018) Standard Guide for Examining Electrical and Mechanical Equipment with Infrared Thermography
  • ASTM E1934-99a(2010) Standard Guide for Examining Electrical and Mechanical Equipment with Infrared Thermography
  • ASTM G83-96 Standard Test Method for Wear Testing with a Crossed-Cylinder Apparatus
  • ASTM D7427-16(2021) Standard Test Method for Immunological Measurement of Four Principal Allergenic Proteins (Hev b 1, 3, 5 and 6.02) in Hevea Natural Rubber and Its Products Derived from Latex
  • ASTM D7427-08 Standard Test Method for Immunological Measurement of Four Principal Allergenic Proteins (Hev b 1, 3, 5 and 6.02) in Natural Rubber and Its Products Derived from Latex
  • ASTM D7427-16 Standard Test Method for Immunological Measurement of Four Principal Allergenic Proteins (Hev b 1, 3, 5 and 6.02) in Hevea Natural Rubber and Its Products Derived from Latex

Japanese Industrial Standards Committee (JISC), Four methods of equipment inspection

  • JIS B 8614:1994 Testing method for mechanical transport refrigeration units
  • JIS M 8708:2021 Iron ores -- Experimental methods for checking the precision of sampling, sample preparation and measurement
  • JIS K 5600-1-3 ERRATUM 1:2002 Testing methods for paints -- Part 1: General rule -- Section 3: Examination and preparation of samples for testing (Erratum 1)

VN-TCVN, Four methods of equipment inspection

  • TCVN 5222-1990 Vletal cutting machines.Methods of inspection of the distance constant between trajectory of machine operating device and real surface

International Electrotechnical Commission (IEC), Four methods of equipment inspection

  • IEC 62629-13-1:2017 3D Display devices - Part 13-1: Visual inspection methods for stereoscopic displays using glasses - Ghost image

Professional Standard - Civil Aviation, Four methods of equipment inspection

  • AC-21-02-2000 Software review method in airborne system and equipment certification

SE-SIS, Four methods of equipment inspection

  • SIS SS 91 42 01-1988 Building design - Daylighting - Simplified method for checking required window glass area
  • SIS SS IEC 315:1989 Radio equipment — Methods of measurement on radio receivers for various classes of emission
  • SIS SS-EN 50 054-1992 Electrical apparatus for the detection and measurement of combustible gases — General requirements and test methods

ZA-SANS, Four methods of equipment inspection

  • SANS 14907-1:2007 Road transport and traffic telematics - Electronic fee collection - Test procedures for user and fixed equipment Part 1: Description of test procedures

KR-KS, Four methods of equipment inspection

  • KS C IEC 62629-13-1-2021 3D display devices — Part 13-1: Visual inspection methods for stereoscopic displays using glasses — Ghost image
  • KS C IEC TS 61430-2018 Secondary cells and batteries — Test methods for checking the performance of devices designed for reducing explosion hazards — Lead-acid starter batteries
  • KS E ISO 8541-2018 Manganese and chromium ores — Experimental methods for checking the bias of sampling and sample preparation

Standard Association of Australia （SAA）, Four methods of equipment inspection

  • AS 2434.9:2000(R2013)
  • AS/NZS 2153.9:1997 Tractors and machinery for agriculture and forestry - Technical means for ensuring safety - Equipment for sowing, planting and distributing fertilizers
  • AS 2891.2.1:1995 Methods of sampling and testing asphalt - Sample preparation - Mixing, quartering and conditioning of asphalt in the laboratory

United States Navy, Four methods of equipment inspection

International Organization for Standardization (ISO), Four methods of equipment inspection

  • ISO 3085:2019 Iron ores — Experimental methods for checking the precision of sampling, sample preparation and measurement
  • ISO 4254-9:1992 Tractors and machinery for agriculture and forestry; technical means for ensuring safety; part 9: equipment for sowing, planting and distributing fertilizers
  • ISO 20957-5:2005 Stationary training equipment - Part 5: Pedal crank training equipment, additional specific safety requirements and test methods
  • ISO 7574-4:1985 Acoustics; statistical methods for determining and verifying stated noise emission values of machinery and equipment; part 4: methods for stated values for batches of machines

Guangdong Provincial Standard of the People's Republic of China, Four methods of equipment inspection

  • DB44/T 1586-2015 Specification for acoustic output detection method of ultrasonic diagnostic equipment

German Institute for Standardization, Four methods of equipment inspection

  • DIN 7899:2006 Playing field equipment - Basketball equipment - Requirements and test methods including DIN EN 1270
  • DIN 28060 Bb.1:1986 Brick-lined vessels and apparatus; examples for test methods for tolerances
  • DIN EN 62058-11:2011 Electricity metering equipment (a.c.) - Acceptance inspection - Part 11: General acceptance inspection methods (IEC 62058-11:2008, modified); German version EN 62058-11:2010
  • DIN EN 14914:2006 LPG equipment and accessories - Transportable refillable welded steel cylinders for Liquefied Petroleum Gas (LPG) - Alternative design and construction; periodic inspection; English version of DIN EN 14914:2006-03
  • DIN EN ISO 10052:2021-11 Acoustics - Field measurements of airborne and impact sound insulation and of service equipment sound - Survey method (ISO 10052:2021); German version EN ISO 10052:2021

American National Standards Institute （ANSI), Four methods of equipment inspection

  • ANSI N43.5-1977 American National Standard N537: Radiological Safety Standard for the Design of Radiographic and Fluoroscopic Industrial X-Ray Equipment Now Copyrighted by HPS * NBS Handbook 123
  • ANSI/IEEE 1658:2011 Standard for Terminology and Test Methods of Digital-to-Analog Converter Devices
  • ANSI/ASA S12.3-1985 Statistical Methods for Determining and Verifying Stated Noise Emission Values of Machinery and Equipment

GOSTR, Four methods of equipment inspection

  • GOST R 58372-2019 Optics and photonics. Lasers and laser-related equipment. Methods for determination of laser-induced damage threshold. Part 4. Inspection, detection and measurement

Professional Standard - Post and Telecommunication, Four methods of equipment inspection

  • YD/T 565-1992 Technical requirements and test methods for service observation desks (Quality checking desks) in manual toll telephone switching equipments

国家食品药品监督管理局, Four methods of equipment inspection

  • YY/T 1534-2017 Detection method for safety classification of light radiation from medical LED equipment

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Four methods of equipment inspection

  • GB/T 24276-2017 A method of temperature-rise verification of low-voltage switchgear and controlgear assemblies by calculation
  • GB/T 16601.4-2017 Lasers and laser-related equipment—Test methods for laser-induced damage threshold—Part 4: Inspection,detection and measurement
  • GB/T 33218-2016 Non-destructive testing—Practice for equipment health monitoring based on fiber sensing technology

TR-TSE, Four methods of equipment inspection

  • TS 3438-1980 GUIDE TO THE CHECKING OF SULPHUR HEXAFLUORIDE (SF6) TAKEN FROM ELECTRICAL EQUIPMENT

Military Standard of the People's Republic of China-General Armament Department, Four methods of equipment inspection

  • GJB 533.29-1988 Detection method for 45 components of submarine cabin air. Determination of Freon-11, chloroform, and carbon tetrachloride content by gas chromatography.

European Committee for Standardization (CEN), Four methods of equipment inspection

  • PD CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
  • EN 50194:2000 Electrical Apparatus for the Detection of Gases in Domestic Premises - Test Methods and Performance Requirements

Danish Standards Foundation, Four methods of equipment inspection

  • DS/EN 12817:2010 LPG Equipment and accessories - Inspection and requalification of LPG tanks up to and including 13 m3S
  • DS/EN 61300-3-20/Corr.:2002 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-20: Examinations and measurements - Directivity of fibre optic branching devices
  • DS/EN 61300-3-20:2002 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-20: Examinations and measurements - Directivity of fibre optic branching devices
  • DS/EN 60512-1-3:1998 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General examination - Section 3: Test 1c: Electrical engagement length
  • DS/EN ISO 10052/A1:2010 Acoustics - Field measurements of airborne and impact sound insulation and of service equipment sound - Survey method
  • DS/EN ISO 10052:2005 Acoustics - Field measurements of airborne and impact sound insulation and of service equipment sound - Survey method
  • DS/ISO 10052:2021 Acoustics – Field measurements of airborne and impact sound insulation and of service equipment sound – Survey method
  • DS/EN ISO 10052:2021 Acoustics – Field measurements of airborne and impact sound insulation and of service equipment sound – Survey method (ISO 10052:2021)

国家药监局, Four methods of equipment inspection

  • YY/T 1643-2018 Functionality and compatibility testing methods for remote medical imaging equipment

Association of German Mechanical Engineers, Four methods of equipment inspection

NL-NEN, Four methods of equipment inspection

  • NEN 10945-1993 Marine navigational equipment. General requirements. Methods of testing and required test results (IEC 945:1988)

IN-BIS, Four methods of equipment inspection

European Committee for Electrotechnical Standardization（CENELEC）, Four methods of equipment inspection

  • EN 50104:2010 Electrical apparatus for the detection and measurement of oxygen - Performance requirements and test methods

CENELEC - European Committee for Electrotechnical Standardization, Four methods of equipment inspection

  • EN 50104:1995 Electrical Apparatus for the Detection and Measurement of Oxygen Performance Requirements and Test Methods
  • EN 50104:1998 Electrical Apparatus for the Detection and Measurement of Oxygen - Performance Requirements and Test Methods
  • EN 50104:2002 Electrical Apparatus for the Detection and Measurement of Oxygen - Performance Requirements and Test Methods
  • EN 50291:2001 Electrical Apparatus for the Detection of Carbon Monoxide in Domestic Premises - Test Methods and Performance Requirements

Underwriters Laboratories (UL), Four methods of equipment inspection

  • UL 711A BULLETIN-2005 OUTLINE OF INVESTIGATION FOR THE FIRE TEST METHOD FOR PORTABLE HAND-HELD EXTINGUISHERS INTENDED FOR USE ON RESIDENTIAL COOKING EQUIPMENT
  • UL SUBJECT 711A-2005 OUTLINE OF INVESTIGATION FOR THE FIRE TEST METHOD FOR PORTABLE HAND-HELD EXTINGUISHERS INTENDED FOR USE ON RESIDENTIAL COOKING EQUIPMENT (Issue 1)
  • UL SUBJECT 711A-2017 OUTLINE OF INVESTIGATION FOR THE FIRE TEST METHOD FOR PORTABLE HAND-HELD EXTINGUISHERS INTENDED FOR USE ON RESIDENTIAL COOKING EQUIPMENT (Issue 2)

Lithuanian Standards Office , Four methods of equipment inspection

  • LST EN 61300-3-20+AC-2003 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-20: Examinations and measurements - Directivity of fibre optic branching devices IEC 61300-3-20:2001)

IX-EU/EC, Four methods of equipment inspection

  • 78/1031/EEC-1978 Council Directive on the Approximation of the Laws of the Member States Relating to Automatic Checkweighing and Weight Grading Machines

BE-NBN, Four methods of equipment inspection

  • NBN-ISO 7574-4:1992 Acoustics. Statistical methods for determining and verifying stated noise emission values of machinery and equipment. Part 4: Methods for stated values for batches of machines

  Method of equipment inspection, The method of equipment inspection generally has, General method of equipment inspection, Four methods of equipment inspection.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved