ZH
RU
ES

Sulfur dioxide is now the main detection method

Sulfur dioxide is now the main detection method, Total:38 items.

In the international standard classification, Sulfur dioxide is now the main detection method involves: Vocabularies, Mining and quarrying, Construction materials, Products of the chemical industry, Environmental testing, Surface treatment and coating, Water quality, Alarm and warning systems, Plant and equipment for the food industry, Air quality, Electrical equipment for working in special conditions.

Association Francaise de Normalisation, Sulfur dioxide is now the main detection method

• NF X43-310:1991 Air quality - Stationary sources - Assesment of automated measuring methods characteristics of sulfur dioxide on site
• NF T37-001-23:2002 Coil coated metals - Test methods - Part 23 : colour stability in humid atmospheres containing sulfur dioxide.
• NF EN 50543:2011 Matériels électroniques portables et transportables de détection et de mesure du dioxyde de carbone et/ou du monoxyde de carbone dans l'air ambiant intérieur des locaux - Exigences et méthodes d'essai
• NF C23-543*NF EN 50543:2011 Electronic portable and transportable apparatus designed to detect and measure carbon dioxide and/or carbon monoxide in indoor ambient air - Requirements and test methods.

Military Standard of the People's Republic of China-General Armament Department, Sulfur dioxide is now the main detection method

• GJB 533.4-1988 Detection method for 45 components of submarine cabin air. Determination of sulfur dioxide content. Calibration tube method

Professional Standard - Environmental Protection, Sulfur dioxide is now the main detection method

• HJ 1045-2019 Technical requirements and testing methods for portable ultraviolet absorption measuring instruments for flue gas from stationary pollution sources (sulfur dioxide and nitrogen oxides)

British Standards Institution (BSI), Sulfur dioxide is now the main detection method

• BS EN 13919:2002 Natural stone test methods - Determination of resistance to ageing by SO2 action in the presence of humidity
• BS EN 50543:2011 Electronic portable and transportable apparatus designed to detect and measure carbon dioxide and/or carbon monoxide in indoor ambient air. Requirements and test methods
• BS 8494:2007 Electronic portable and transportable apparatus designed to detect and measure carbon dioxide in indoor ambient air - Requirements and test methods

European Committee for Standardization (CEN), Sulfur dioxide is now the main detection method

• EN 13919:2002 Natural stone test methods Determination of resistance to ageing by SO2 action in the presence of humidity

Korean Agency for Technology and Standards (KATS), Sulfur dioxide is now the main detection method

• KS M ISO 900-2003(2008) Aluminium oxide primarily used for the production of aluminium－Determination of titanium content－Diantipyrylmethane photometric method

HU-MSZT, Sulfur dioxide is now the main detection method

• MSZ 21862/2-1976

AASHTO - American Association of State Highway and Transportation Officials, Sulfur dioxide is now the main detection method

• T 303-2000 Standard Method of Test for Accelerated Detection of Potentially Deleterious Expansion of Mortar Bars Due to Alkali-Silica Reaction

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Sulfur dioxide is now the main detection method

• GJB 5969.2-2007 Test methods for microsphere uranium dioxide with coated niobium for submarine nuclear power plant.Part 2: Determination of uranium by ferrous sulfate reduction and potassium dichrormate titration method
• GJB 5969.5-2007 Test methods for microsphere uranium dioxide with coated niobium for submarine nuclear power plant.Part 5:Determination of tungsten by zinate toluol-3,4-dithiol.trichloromethane extraction spedrophotometry

未注明发布机构, Sulfur dioxide is now the main detection method

• GJB 8793.2-2015 Testing method for niobium-coated uranium dioxide microspheres used in submarine nuclear power plants Part 2: Determination of uranium Ferrous sulfate reduction-potassium dichromate oxidation potentiometric titration method
• GJB 8793.5-2015 Testing method for niobium-coated uranium dioxide microspheres used in submarine nuclear power plants. Part 5: Determination of tungsten. Zinc dithiophene salt-chloroform extraction spectrophotometry.
• BS EN 50543:2011(2014) Electronic portable and transportable apparatus designed to detect and measure carbon dioxide and / or carbon monoxide in indoor ambient air — Requirements and test methods

Professional Standard - Agriculture, Sulfur dioxide is now the main detection method

• 水产品质量安全检验手册 7.6.2.1-2005 Chapter 7 Inspection of Additives in Aquatic Products Section 6 Determination of Bleach in Aquatic Products 2. Determination of Sulfur Dioxide (1) Rapid Qualitative Method

RU-GOST R, Sulfur dioxide is now the main detection method

• GOST 28226-1989 Basic environmental testing procedures. Part 2. Tests. Test Kc: Sulphur dioxide test for contacts and connections
• GOST 28233-1989 Basic environmental testing procedures. Part 2. Tests. Guidance to test Kc: Sulphur dioxide test for contacts and connections

American Society for Testing and Materials (ASTM), Sulfur dioxide is now the main detection method

• ASTM D5997-15 Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
• ASTM D5904-02(2017) Standard Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
• ASTM D5997-96(2000) Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
• ASTM D5997-96(2005) Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
• ASTM D5997-96(2009) Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
• ASTM D5904-96 Standard Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection

German Institute for Standardization, Sulfur dioxide is now the main detection method

• DIN 6653-2:2015-06 Beverage dispensing systems - Accessories - Part 2: Performance requirements and test methods for systems for the detection of carbon dioxide
• DIN EN 50545-1:2017 Electrical apparatus for the detection and measurement of toxic and combustible gases in car parks and tunnels - Part 1: General performance requirements and test methods for the detection and measurement of carbon monoxide and nitrogen oxides
• DIN 6653-2:2015 Beverage dispensing systems - Accessories - Part 2: Performance requirements and test methods for systems for the detection of carbon dioxide
• DIN 6653-2:2004 Beverage dispensing systems - Accessories - Part 2: Performance requirements and test methods for apparatus for the detection of carbon dioxide
• DIN EN 50545-1:2012 Electrical apparatus for the detection and measurement of toxic and combustible gases in car parks and tunnels - Part 1: General performance requirements and test methods for the detection and measurement of carbon monoxide and nitrogen oxides; German ver

European Committee for Electrotechnical Standardization（CENELEC）, Sulfur dioxide is now the main detection method

• EN 50543:2011 Electronic portable and transportable apparatus designed to detect and measure carbon dioxide and/or carbon monoxide in indoor ambient air - Requirements and test methods
• EN 50543:2011/AC:2011 Electronic portable and transportable apparatus designed to detect and measure carbon dioxide and/or carbon monoxide in indoor ambient air - Requirements and test methods

Danish Standards Foundation, Sulfur dioxide is now the main detection method

• DS/EN 50543:2011 Electronic portable and transportable apparatus designed to detect and measure carbon dioxide and/or carbon monoxide in indoor ambient air - Requirements and test methods

Lithuanian Standards Office , Sulfur dioxide is now the main detection method

• LST EN 50543-2011 Electronic portable and transportable apparatus designed to detect and measure carbon dioxide and/or carbon monoxide in indoor ambient air - Requirements and test methods
• LST EN 50543-2011/AC-2011 Electronic portable and transportable apparatus designed to detect and measure carbon dioxide and/or carbon monoxide in indoor ambient air - Requirements and test methods

AENOR, Sulfur dioxide is now the main detection method

• UNE-EN 50543:2011 Electronic portable and transportable apparatus designed to detect and measure carbon dioxide and/or carbon monoxide in indoor ambient air - Requirements and test methods

Others:   Sulfur dioxide is now the main detection method.