ZH
RU
ES

aging test

aging test, Total:374 items.

In the international standard classification, aging test involves: Analytical chemistry, Rubber, Products of the textile industry, Plastics, Products of the chemical industry, Tyres, Paints and varnishes, Fuels, Waxes, bituminous materials and other petroleum products, Construction materials, Energy and heat transfer engineering in general, Protection of and in buildings, Rectifiers. Convertors. Stabilized power supply, Rubber and plastics products, Electrical accessories, Test conditions and procedures in general, Footwear, Environmental testing, Manufacturing processes in the rubber and plastics industries, Adhesives, Fibre optic communications, Electrical and electronic testing, Insulating materials, Wood-based panels, Protective equipment, Cellular materials, Wood, sawlogs and sawn timber, Textile fibres, Thermodynamics and temperature measurements, Non-destructive testing, Paper and board, Road vehicle systems, Protection against dangerous goods, Packaging and distribution of goods in general, Air quality, Road vehicles in general, Power transmission and distribution networks, Petroleum products in general, Aerospace electric equipment and systems, Glass, Mathematics, Corrosion of metals, Reinforced plastics, Materials for aerospace construction, Insulating fluids, Lighting, Agricultural machines, implements and equipment, Seals, glands, Construction industry, Sterilization and disinfection, Electrical wires and cables, Electricity. Magnetism. Electrical and magnetic measurements, Medical equipment, Road engineering, Insulation, Galvanic cells and batteries, Fruits. Vegetables, Piezoelectric and dielectric devices, Pipeline components and pipelines, Capacitors, Nuclear energy engineering.

Professional Standard - Aerospace, aging test

QJ/Z 164.1-1986 Thermal aging test method for polymer materials Aging test guidelines
QJ 2328-1992 Composite solid propellant storage aging test method
QJ 1238.12-1987 High Temperature Aging Test of Cable Test Method on Missile Launch Vehicle
QJ 2328A-2005 High temperature accelerated aging test method for composite solid propellants
QJ/Z 164.2-1986 Data processing specification for thermal aging test method of polymer materials

PK-PSQCA, aging test

PS 348-1963 Accelerated Ageing Tests on Rubbers.

Professional Standard - Machinery, aging test

JB/T 7444-1994 Air heat-up ageing tests box
JB/T 7444-2018 Air heat-up ageing tests box
JB/T 1544-2015 Rapid test procedure for thermal endurance of electrical insulating impregnting varnishes and varnished fabrics.Thermogravameric point slope(TPS) method
JB/T 1544-1999 Rapid test procedure for thermal endurance of electrical insulating impregnating varnishes and varnished fabrics-thermogravameric point slope (TPS)method
JB/T 4278.6-1993 Rubber plastic wire and cable test equipment verification method natural ventilation thermal aging test chamber
JB/T 4278.9-1993 Rubber plastic wire and cable test equipment verification method Oxygen bomb, air bomb aging test chamber
JB/T 4278.6-2011 Verification procedure for test equipment of rubber plastic wire and cable.Part 6: Natural ventilation thermal aging test oven
JB/T 4278.9-2011 Verification procedure for test equipment of rubber plastic wire and cable.Part 9: Oxygen bomb, air bomb aging test oven
JB/T 4278.13-2011 Verification procedure for test equipment of rubber plastic wire and cable.Part 13: Forced air heat aging test oven

(U.S.) Ford Automotive Standards, aging test

FORD FLTM BO 001-2-2001 PLASTICS - TEST FOR AGING IN GASOLINE
FORD FLTM BO 001-02-2001 PLASTICS - TEST FOR AGING IN GASOLINE

Taiwan Provincial Standard of the People's Republic of China, aging test

CNS 3556-1999 Method of test for accelerated aging of vulcanized rubber
CNS 12561-1989 Method of Test for Fiber Optic Devices (FOTP-101 Accelerated Oxygen Aging)
CNS 10877-1984 Method of Test for Fiber Optic Devices (Maintenance Aging)
CNS 12886-1993 Method of Test for Accelerated Aging of Paper and Paperboard - Dry Heat Treatment at 105℃
CNS 12886-1-1993 Method of Test for Accelerated Aging of Paper and Paperboard - Dry Heat Treatment at 120℃ or 150℃
CNS 12886.1-1993 Method of Test for Accelerated Aging of Paper and Paperboard - Dry Heat Treatment at 120℃ or 150℃
CNS 7663-1987 Method of Test for Low Frequency (Below 3 MHz) Electrical Connectors (TP - 24 Maintenance Aging Test)
CNS 12887-1-1993 Method of Test for Accelerated Aging of Paper and Paperboard - Moist Heat Treatment at 80°Ｃ and 65% R.H.
CNS 12887-1993 Method of Test for Accelerated Aging of Paper and Paperboard - Moist Heat Treatment at 90°Ｃ and 25% R.H.
CNS 12887.1-1993 Method of Test for Accelerated Aging of Paper and Paperboard - Moist Heat Treatment at 80°Ｃ and 65% R.H.
CNS 3278-1971 Method of Test for Polymethylacrylate Corrugated Sheet (Aging Test)

Association Francaise de Normalisation, aging test

NF P90-105:1992 Sports grounds. Artificial ageing test.
NF T30-056:1974 PAINTS. CONDUCT OF NATURAL WEATHERING TESTS.
NF P84-351:1955 Tightness. Paste products. Ageing test.
NF T30-049:2017 Paints and varnishes - Cladding paints - Accelarated ageing test
NF C26-202:1975 Méthodes d'essai des matières isolantes - Analyse statistique de données d'essais de vieillissement.
NF T30-049:1985 Paints and varnishes. Cladding paints. Accelerated ageing test.
NF B51-263:1979 Particle boards. Accelerated ageing by test "V 313" method.-.
NF G37-105-1*NF EN 12280-1:1998 Rubber- or plastic- coated fabrics. Accelerated ageing tests. Part 1 : heat ageing.
NF G37-105-3*NF EN 12280-3:2003 Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 3 : environnement ageing.
NF T56-117:2000 Flexible and rigid cellular polymeric materials - Accelerated ageing tests.
NF B51-262:1972 Particle boards. Accelerated ageing by boiling water.(so-called test "V 100").
NF T56-117*NF EN ISO 2440:2019 Flexible and rigid cellular polymeric materials - Accelerated ageing tests
NF EN 12280-1:1998 Supports textiles revêtus de caoutchouc ou de plastique - Essais de vieillissement accéléré - Partie 1 : vieillissement à la chaleur.
NF ISO 18543:2022 Verre dans la construction - Vitrages électrochromes - Essai de vieillissement accéléré et exigences
NF U51-159:1990 Agricultural drainage - Unplasticized PVC ringed pipes - Accelerated ageing test
NF T56-117/A1:2010 Flexible and rigid cellular polymeric materials - Accelerated ageing tests - Amendment 1.
NF T56-117/A2:2014 Flexible and rigid cellular polymeric materials - Accelerated ageing tests - Amendment 2
NF U51-158:1990 Agricultural drainage. Unplasticized PVC ringed pipes. Natural ageing test.
NF T48-109:1994 Asbestos and rubber compressed sheets for seals. Accelerated ageing test on oven.
NF G37-105-2*NF EN 12280-2:2003 Rubber-or plastics-coated fabrics - Accelerated ageing tests - Part 2 : physical ageing : effect of light or weathering.
NF T56-117:1979 RUBBER OR PLASTIC CELLULAR PRODUCTS. ACCELERATED AGEING TESTS. RIGID AND FLEXIBLE CELLULAR PRODUCTS.
NF P90-138*NF EN 14836:2018 Surfaces sportives - Surfaces synthétiques pour terrains de sport en plein air - Méthode d'essai de vieillissement artificiel
NF C33-045-5*NF EN 50483-5:2009 Test requirements for low voltage aerial bundled cable accessories - Part 5 : electrical ageing test.
NF C32-011-401*NF EN 60811-401:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: miscellaneous tests - Thermal ageing methods - Ageing in an air oven
NF C32-011-412*NF EN 60811-412:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: miscellaneous tests - Thermal ageing methods - Ageing in an air bomb
NF L52-250-409*NF EN 3475-409:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 409 : air-excluded ageing
NF L52-252-306*NF EN 4057-306:2007 Aerospace series - Cable ties for harnesses - Test methods - Part 306 : heat ageing test
NF C20-540:1990 ENVIRONMENTAL TESTING. TEST METHODS. CLIMATIC AGEING TEST OF EQUIPMENT AND SYNTHETIC MATERIALS FOR OUTDOOR USE.
NF EN 14836:2018 Surfaces for sports areas - Synthetic surfaces for outdoor sports areas - Test method for artificial weathering
NF L17-300-5*NF EN 2243-5:2006 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 5 : ageing tests.
NF EN 2243-5:2006 Série aérospatiale - Matériaux non-métalliques - Système d'adhésifs structuraux - Méthodes d'essai - Partie 5 : essais de vieillissement
NF R81-305:1982 Flexible cellular plastics with skin. Skin ageing test under artificial light (xenon lamps) for automobile construction.
NF C93-684-3*NF EN IEC 62884-3:2018 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 3 : frequency aging test methods
NF EN 12280-3:2003 Supports textiles revêtus de caoutchouc ou de plastique - Essais de vieillissement accéléré - Partie 3 : vieillissement dans un environnement réactif
NF T34-201-3*NF EN 927-3:2019 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3 : natural weathering test
NF EN 15062:2006 Adhésifs pour cuir et matériaux de la chaussure - Adhésifs à base de solvant et en dispersion - Essai de vieillissement des collages dans des conditions spécifiées

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, aging test

GB/T 7141-2008 Plastics.Methods of heat aging
GB/T 11206-2009 Standard test method for rubber deterioration.Surface cracking
GB/T 33873-2017(英文版) Test method of energy efficiency for hot aging test oven
GB/T 15905-1995 Rubber, vulcanized--Test method of damp heat aging
GB/T 18244-2000 Test methods for resistance to weathering of building water proofing materials
GB/T 14831-2003 Test method of resistance to steam ageing for rubber latex products
GB/T 18244-2022 Test methods for weathering resistance of building waterproof materials
GB/T 17875-1999 Practice for accelerated aging of pressure-Sensitive tapes
GB/T 13938-1992 Test method for natural storage aging of vulcanized rubber
GB/T 17782-1999 Rubber, vulcanized--Test method of aging by heat and air pressure
GB/T 14274-2003 Polymeric materials cellular flexible--Accelerated ageing tests
GB/T 24135-2022 Rubber- or plastics-coated fabrics—Accelerated-ageing tests
GB/T 24135-2009 Rubber or plastics-coated fabrics.Accelerated-ageing tests
GB/T 12831-1991 Rubber, vulcanized--Test method of resistance to artificial weathering (xenon lamp)
GB/T 13939-1992 Rubber,vulcanized.Test method of heat and oxygen.Tube tester ageing method
GB/T 13939-2014 Rubber, vulcanized.Test method of deterioration by heat and oxygen.Tube tester
GB/T 16259-2008 Test method for in accel erated weathering building materials
GB/T 9640-1988 Polymeric materials, Cellular flexible--Accelerated ageing tests
GB/T 29365-2012 Wood-Plastic Composite (WPC).Test methods of artificial weathering
GB/T 13642-1992 Rubber,vulcanized--resisrance to ozone ageing--Dynamic strain test method
GB/T 15255-2015 Rubber, vulcanized.Test method for artificial weathering.Carbon-arc lamp
GB/T 22411-2008 Test method of antiaging for plastic woven packaging of dangerous goods
GB/T 7762-1987 Rubber, vulcanized--To zone ageing--Static strain test method
GB/T 9640-2008 Flexible and rigid cellular polymeric meterials.Accelerated ageing tests
GB/T 31881-2015 Accelerated weathering test methods of automotive nonmetal components and materials using a fluorescent UV and condensation apparatus
GB/T 16259-1996 Test method for color changes in accelerated weathering of building materials
GB/T 3511-2001 Rubber,vulcanized and thermoplastic the test method of resistance to direct natural weathering
GB/T 32710.11-2016 Safety requirements for environmental testing and conditioning equipment.Part 11:Heat aging test chambers
GB/T 11417.9-2012 Ophthalmic optics.Contact lenses.Part 9:Ageing by exposure to UV and visible radiation(in vitro method)
GB/T 2951.12-2008 Common test methods for insulating and sheathing materials of electric and optical cables.Part 12:Methods for general application.Thermal ageing methods
GB/T 2951.2-1997 Common test methods for insulating and sheating materials of electric cables. Part 1: Methods for general application. Section two: Thermal ageing methods
GB/T 32368-2015 Measurement of resistance to elevated temperature and humidity for adhesive tapes
GB/T 14522-2008 Artificial weathering test method for plastics,coating and rubber materials used for machinery industrial products.Fluorescent UV lamps
GB/T 3984.2-2004 Power capacitors for induction heating installations Part 2:Ageing test,destruction test and requirements for disconnecting internal fuses
GB/T 2423.24-2022 Environmental testing—Part 2: Test methods—Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering

GM Daewoo, aging test

GMKOREA EDS-T-7421-2012 Accelerated Aging Test for Elastomers ????? ???? ???? Version 5; English/Korean; This standard may be applied only for current projects. It is Superceded for all future projects and replaced by ISO188 [Replaced: GMKOREA EDS-T-7421]
GMKOREA EDS-T-7672-2011 Test Method for Resistance of Cellular Material to Heat Ageing

Anhui Provincial Standard of the People's Republic of China, aging test

DB34/T 3318-2019 Xuan paper light aging test method

Korean Agency for Technology and Standards (KATS), aging test

KS M 6788-2004 Accelerated aging test methods for vulcanized rubber
KS M 6788-1999 Accelerated aging test methods for vulcanized rubber
KS M 2073-2011 Testing method for weathering of liquefied petroleum gas
KS M 6788-1994 Accelerated aging test methods for vulcanized rubber
KS M 6788-2014 Accelerated aging test methods for vulcanized rubber
KS K 0706-2007 Test method for weathering resistance of cloth:Weather-o-meter method
KS M ISO 1419:2008 Rubber- or plastics-coated fabrics－Accelerated-ageing tests
KS M ISO 2810:2011 Paints and varnishes－Natural weathering of coatings－Exposure and assessment
KS M 5982-1995 Testing method for accelerated weathering by fluorescent UV condensation type
KS M ISO 1419:2018 Rubber- or plastics-coated fabrics — Accelerated-ageing tests
KS K 0856-2006 Rubber-or plastics-coated fabrics－Accelerated-ageing tests
KS M 3071-2004 Plastics􀫥Determination of thermal stability of thermoplastics􀫥Oven method
KS K 0856-2010 Rubber-or plastics-coated fabrics－Accelerated-ageing tests
KS M ISO 2440:2002 Flexible and rigid cellular polymeric materials-Accelerated ageing tests
KS M ISO 2440:2017 Flexible and rigid cellular polymeric materials－Accelerated ageing tests
KS C IEC 60811-412:2016 Electric and optical fibre cables ― Test methods for non-metallic materials ― Part 412: Miscellaneous tests ― Thermal ageing methods ― Ageing in an air bomb
KS M ISO 16053:2011 Paints and varnishes-Coating materials and coating systems for exterior wood-Natural weathering test
KS M ISO 16053:2016 Paints and varnishes－Coating materials and coating systems for exterior wood－Natural weathering test

German Institute for Standardization, aging test

DIN EN 73:1990 Wood preservatives; accelerated ageing tests of treated wood prior to biological testing; evaporative ageing procedure; german version EN 73:1988
DIN EN 12280-1:1998 Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 1: Heat ageing; German version EN 12280-1:1997
DIN EN 12280-1:1998-01 Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 1: Heat ageing; German version EN 12280-1:1997
DIN EN 12280-3:2002-11 Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 3: Environmental ageing; German version EN 12280-3:2002
DIN 75220:1992 Ageing of automotive components in solar simulation units
DIN 51554-1:1978 Testing of mineral oils; Test of susceptibility to ageing according to Baader; Purpose, sampling, ageing
DIN EN 4057-306:2008-02 Aerospace series - Cable ties for harnesses - Test methods - Part 306: Heat ageing test; German and English version EN 4057-306:2006 / Note: Applies in conjunction with DIN EN 4057-100 (2008-02).
DIN EN 12280-2:2002-11 Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 2: Physical ageing: Effect of light or weathering; German version EN 12280-2:2001
DIN EN 14836:2019 Surfaces for sports areas - Synthetic surfaces for outdoor sports areas - Test method for artificial weathering
DIN CEN/TS 14999:2013-08*DIN SPEC 16499:2013-08 Adhesives for thermoplastic piping systems - Accelerated ageing test in storage container; German version CEN/TS 14999:2013
DIN EN 12280-3:2002 Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 3: Environmental ageing; German version EN 12280-3:2002
DIN EN 50483-5:2009 Test requirements for low voltage aerial bundled cable accessories - Part 5: Electrical ageing test; German version EN 50483-5:2009
DIN EN 4057-306:2008 Aerospace series - Cable ties for harnesses - Test methods - Part 306: Heat ageing test; German and English version EN 4057-306:2006
DIN EN 14836:2019-04 Surfaces for sports areas - Synthetic surfaces for outdoor sports areas - Test method for artificial weathering; German version EN 14836:2018
DIN EN 2243-5:2006 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 5: Ageing tests; German and English version EN 2243-5:2005
DIN EN 2243-5:2006-10 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 5: Ageing tests; German and English version EN 2243-5:2005
DIN EN 73:2014 Wood preservatives - Accelerated ageing of treated wood prior to biological testing - Evaporative ageing procedure; German version EN 73:2014
DIN ISO 9370:2018 Plastics - Instrumental determination of radiant exposure in weathering tests - General guidance and basic test method (ISO 9370:2017); Text in German and English
DIN EN 927-3:2020 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3: Natural weathering test
DIN CEN/TS 14999:2013 Adhesives for thermoplastic piping systems - Accelerated ageing test in storage container; German version CEN/TS 14999:2013
DIN EN 60811-401:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven (IEC 60811-401:2012); German version EN 60811-401:2012

CZ-CSN, aging test

CSN 62 1528-1976 Ageing tests of rubber in atmoapheric condi- tiona
CSN 62 1523-1981 Vulcanized rubber. Accelerated heat oxygen ageing test
CSN 62 1528-1979 Rubber. Ageing tests in atmospheric conditions
CSN 62 1522-1981 Vulcanized rubber. Accelerated heat air ageing test
CSN 34 6421-1961 Tests of thermal aging of varnished wires on basis of decrease of tractility of lacquer film
CSN 34 6422-1961 Tests of thermal aging of varnished wires on basis of decrease of electric strength of lacquer film
CSN 34 7010 Cast.60-1972 Accelerated ageing teat of plastics coverings

国家市场监督管理总局、中国国家标准化管理委员会, aging test

GB/T 37259-2018 Test method for aging automobile tyres
GB/T 41203-2021 Method for accelerated aging test of PV module encapsulating material
GB/T 11024.2-2019 Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V - Part 2: Ageing testing

AENOR, aging test

UNE 211605:2013 Climatic ageing test of outer covering cables.
UNE-EN 12280-1:1998 Rubber- or plastics- coated fabrics - Accelerated ageing tests - Part 1: Heat ageing
UNE-EN 12280-3:2002 Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 3: Environmental ageing
UNE-EN 12280-2:2002 Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 2: Physical ageing: effect of light or weathering
UNE-EN 2243-5:2006 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 5: Ageing tests
UNE-EN ISO 2440:2001/A1:2010 Flexible and rigid cellular polymeric materials - Accelerated ageing tests - Amendment 1 (ISO 2440:1997/Amd 1:2010)
UNE-EN ISO 2440:2001/A2:2014 Flexible and rigid cellular polymeric materials - Accelerated ageing tests - Amendment 2 (ISO 2440:1997/AMD 2:2014)
UNE-EN 927-3:2013 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3: Natural weathering test

Professional Standard - Petrochemical Industry, aging test

SH/T 0774-2005 Standard practice for accelerated aging of asphalt binder using a pressurized aging vessel (PAV)

National Metrological Technical Specifications of the People's Republic of China, aging test

JJF 2051-2023 Calibration Specification for Ozone Aging Test Chambers
JJF 1525-2015 Calibration Specification for Irradiance of Artificial Accelerated Weathering Apparatus of Xenon Arc Lamp

British Standards Institution (BSI), aging test

BS EN 12280-1:1998 Rubber- or plastics-coated fabrics - Accelerated ageing tests - Heat ageing
BS EN 12280-3:2002 Rubber- or plastics-coated fabrics - Accelerated ageing tests - Environmental ageing
BS EN 50483-5:2009 Test requirements for low voltage aerial bundled cable accessories — Part 5: Electrical ageing test
BS EN 3475-401:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Accelerated ageing
BS EN 3475-409:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Air-excluded ageing
BS EN 12280-2:2002 Rubber- or plastics-coated fabrics - Accelerated ageing tests - Physical ageing: effect of light or weathering
BS EN ISO 2440:2000 Flexible and rigid cellular polymeric materials - Accelerated ageing tests
BS EN ISO 2440+A1:2000 Flexible and rigid cellular polymeric materials. Accelerated aging tests
BS EN ISO 2440:1999+A1:2010 Flexible and rigid cellular polymeric materials - Accelerated aging tests
BS EN 60811-401:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Thermal ageing methods. Ageing in an air oven
BS EN 2243-5:2005 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Ageing tests
BS EN 60811-412:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Thermal ageing methods. Ageing in an air bomb
BS EN 4057-306:2007 Aerospace series - Cable ties for harnesses - Test methods - Heat ageing test
BS EN 4057-306:2006 Aerospace Series. Cable Ties for Harnesses. Test Methods. Part 306: Heat Ageing Test
BS ISO 18543:2021 Tracked Changes. Glass in building. Electrochromic glazings. Accelerated ageing test and requirements
20/30379070 DC BS ISO 18543. Glass in building. Electrochromic glazings. Accelerated ageing test and requirements
BS ISO 23741:2021 Plastics. Determination of spray water delivery during spray cycles when using a xenon arc weathering test apparatus
BS 3424 Pt.12:1990 Toated fabrics. Methods 14A, 14B, 14C, 14D and 14E: accelerated ageing tests
BS EN 60216-1:2002 Guide for the determination of thermal endurance properties of electrical insulating materials - Ageing procedures and evaluation of test results
BS 7826-1:1995 Guide for the statistical analysis of ageing test data. Methods based on mean values of normally distributed test results
BS IEC 60493-1:2011 Guide for the statistical analysis of ageing test data. Methods based on mean values of normally distributed test results
20/30394043 DC BS ISO 23741. Plastics. Determination of spray water delivery during spray cycles when using a xenon arc weathering test apparatus
BS 5173-106.2:1990 Methods of test for rubber and plastics hoses and hose assemblies - Environmental tests - General requirements for high temperature ageing tests
PD IEC/TS 62788-7-2:2017 Measurement procedures for materials used in photovoltaic modules. Environmental exposures. Accelerated weathering tests of polymeric materials
BS ISO 9370:2017 Tracked Changes. Plastics. Instrumental determination of radiant exposure in weathering tests. General guidance and basic test method
BS EN 60931-2:1996 Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1000 V. Ageing test and destruction test
BS EN 15062:2006 Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing ageing of bonds under specified conditions

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, aging test

GB/T 35858-2018 Rubber,vulcanized—Test method of salt mist aging
GB/T 33873-2017 Testing method of energy efficiency for hot aging test oven
GB/T 33569-2017 Test method of artificial weathering for coatings on exterior wood
GB/T 34179-2017 Photovoltaic glass—Accelerated aging test method under multi-factor coupling conditions
GB/T 32088-2015 Accelerated weathering test methods of automotive nonmetal components and materials using a xenon-arc apparatus

Professional Standard - Chemical Industry, aging test

HG/T 2724.6-1995 Rubber filament test method heat aging test
HG/T 3049-1999 Rubber or plastics coated fabrics Accelerated ageing tests
HG/T 2724.3-1995 Test method for rubber filament - Accelerated aging test in relaxed state

Military Standard of the People's Republic of China-General Armament Department, aging test

GJB 987.3-1990 Weather balloon test method Ozone aging test
GJB 987.1-1990 Weather balloon test method hot air aging test
GJB 280-1987 Test method for weather balloon resistance to sunlight aging
GJB 17.6-1984 Test methods for aviation wires and cables Oven aging test
GJB 10021-2021 Composite solid propellant accelerated aging test method

YU-JUS, aging test

JUS N.A5.200-1979 Ageing testing of electrical insulating materials. Statistical analysis ofageing test data. Methods based on mean values ofnormally distributed test results

Group Standards of the People's Republic of China, aging test

T/CPSS 1006-2020 Highly accelerated life test methods of switching power supply
T/ZZB 1079-2019 Xenon-arc sources aging resistance tester for plastics and their products
T/TTGA 001-2020 Medical and civil protective equipment – Accelerated aging tests
T/CSRA 10.3-2021 Test method for aging resistance of aramid Ⅲ fiber Part 3: Xenon lamp test method
T/GDCKCJH 066-2022 Performance requirements and test methods for ozone aging test chambers
T/CSAE 104-2019 Xenon arc lamp aging test method for automotive exterior coating laboratory
T/CSAE 70-2018 The sunlight simulation accelerated aging test method for the passenger vehicle
T/CSAE 134-2020 Aging resistance of automobile—Outdoor accelerated weathering test method of exposure with solar tracking concentration apparatus
T/CIE 151-2022
T/CSTM 00043.4-2018 Atmospheric corrosion test— Part 4: Exposure corrosion tests of polymeric materials
T/CECS 10106-2020 Natural aging test method for building reflective insulation materials Reflective insulation performance
T/CAAMM 16-2018 Test method for ozone aging resistance of rubber hoses and hose assemblies for agricultural machinery

SE-SIS, aging test

SIS SS IEC 493:1982 Guide for the statistical analysis of ageing test data
SIS 16 92 15-1975 Flexible cellular materials. Accelerated ageing test

RO-ASRO, aging test

STAS 9676-1974 FLEXIBLE CELLULAR MATERIALS Test to accelerated ageing

TR-TSE, aging test

TS 2826-1977 FLEXIBLE CELLULAR MATERIALS ACCELERATED AGEING TESTS

IN-BIS, aging test

American National Standards Institute （ANSI), aging test

ANSI/EIA 364-24B:1998 Electric Connectors – Maintenance Aging Test Procedure
ANSI/EIA 364-24B:2009 Maintenance Aging Test Procedure for Electrical Connectors
ANSI/TIA-455-74-A-2003 Fluid Immersion Aging Procedure for Optical Fiber Optical Properties
ANSI/IEEE 1407:2007 Guide for Accelerated Aging Tests for Medium-Voltage (5 kV-35 kV) Extruded Electric Power Cables Using Water-Filled Tanks

Fujian Provincial Standard of the People's Republic of China, aging test

DB35/T 1567-2016 Test method for thermal aging of mesh fabrics for shoes

ES-UNE, aging test

UNE 211605:2022 Climatic ageing test of outer covering cables.
UNE-EN 50483-5:2009 Test requirements for low voltage aerial bundled cable accessories -- Part 5: Electrical ageing test (Endorsed by AENOR in April of 2011.)
UNE-EN 14836:2021 Surfaces for sports areas - Synthetic surfaces for outdoor sports areas - Test method for artificial weathering

RU-GOST R, aging test

GOST 9.706-1981 Unified system of corrosion and ageing protection. Polimer materials. Test methods for radiation ageing resistance
GOST 18956-1973 Rolling roof materials. Aging under artifical climatic factors. Gest methods
GOST R 57695-2017 Polymer composites. Test methods for aging of sandwich construction under wet and warm
GOST 9.707-1981 Unified system of corrosion and ageing protection. Polymeric materials. Methods of accelerated climatic ageing test
GOST 9.708-1983 Unified system of corrosion and ageing protection. Plastics. Ageing test methods on exposure to natural and artificial climatic factors
GOST R ISO 13781-2011 Poly(L-lactide) resins and fabricated forms for surgical implants. In vitro degradation testing
GOST R 56773-2015 Composites. Method of accelerated ageining tests of absorptive electrochromic coatings on sealed insulating glass units

Professional Standard - Aviation, aging test

HB 5319-1993 Test method for thermal aging of anaerobic adhesives for aviation
HB 5320-1993 Test method for hygrothermal aging of anaerobic adhesives for aviation
HB 5251-1983 Test method for hot air aging of rubber O-rings
HB 5247-1993 Test method for hot air accelerated aging of room temperature vulcanizing sealants
HB 7400-1996 Test method for natural aging of sealants in civil aircraft pressurized cabin simulation parts

International Organization for Standardization (ISO), aging test

ISO 2440:1983 Polymeric materials, cellular flexible; Accelerated ageing tests
ISO 1419:2018 Rubber- or plastics-coated fabrics - Accelerated-ageing tests
ISO 1419:1995 Rubber- or plastics-coated fabrics - Accelerated-ageing tests
ISO 1419:2019 Rubber- or plastics-coated fabrics — Accelerated-ageing tests
ISO 2810:1974 Paints and varnishes; Notes for guidance on the conduct of natural weathering tests
ISO/CD 2440 Flexible and rigid cellular polymeric materials — Accelerated ageing tests
ISO 18543:2017 Glass in building - Electrochromic glazings - Accelerated ageing test and requirements
ISO 18543:2021 Glass in building - Electrochromic glazings - Accelerated ageing test and requirements
ISO 2440:1997/Amd 2:2014 Flexible and rigid cellular polymeric materials - Accelerated ageing tests; Amendment 2
ISO 2440:1997/Amd 1:2010 Flexible and rigid cellular polymeric materials — Accelerated ageing tests — Amendment 1
ISO 16053:2010 Paints and varnishes - Coating materials and coating systems for exterior wood - Natural weathering test
ISO 16053:2018 Paints and varnishes - Coating materials and coating systems for exterior wood - Natural weathering test
ISO 16053:2004 Paints and varnishes - Coating materials and coating systems for exterior wood - Natural weathering test

Professional Standard - Textile, aging test

FZ/T 01008-1991 Test method for hot air accelerated aging of coated fabrics
FZ/T 75002-2014 Coated fabrics.Light accelerated ageing tests.Xenon-arc method
FZ/T 75002-1993 Test method for accelerated light aging of coated fabrics by xenon arc method
FZ/T 75007-1995 Test method for accelerated aging of coated fabrics in hot and humid air

KR-KS, aging test

KS M ISO 1419-2018 Rubber- or plastics-coated fabrics — Accelerated-ageing tests
KS M ISO 2440-2017 Flexible and rigid cellular polymeric materials－Accelerated ageing tests
KS B 5345-1998(2023) Forced air circulation oven type thermal accerelated aging testers
KS M ISO 2440-2022 Flexible and rigid cellular polymeric materials — Accelerated ageing tests
KS C IEC 60811-412-2016 Electric and optical fibre cables ― Test methods for non-metallic materials ― Part 412: Miscellaneous tests ― Thermal ageing methods ― Ageing in an air bomb
KS C IEC 62884-3-2023 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators — Part 3: Frequency aging test methods

国家林业和草原局, aging test

LY/T 3033-2018 Test methods for artificial aging of wood coatings for outdoor use

European Committee for Standardization (CEN), aging test

EN 12280-1:1997 Rubber- or plastics-coated fabrics - Accelerated ageing tests - Part 1: Heat ageing
EN 12280-3:2002 Rubber- or plastics-coated fabrics - Accelerated ageing tests - Part 3: Environmental ageing
EN ISO 2440:2019 Flexible and rigid cellular polymeric materials - Accelerated ageing tests (ISO 2440:2019)
EN 2243-5:1992 Aerospace series; structural adhesives; test methods; part 5: ageing tests
EN ISO 2440:1999/A2:2014 Flexible and rigid cellular polymeric materials - Accelerated ageing tests - Amendment 2 (ISO 2440:1997/AMD 2:2014)
EN 4057-306:2006 Aerospace series - Cable ties for harnesses - Test methods - Part 306: Heat ageing test
EN ISO 2440:1999 Flexible and Rigid Cellular Polymeric Materials - Accelerated Ageing Tests Incorporates Amendment A1: 2010
EN 3475-409:2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 409: Air-excluded ageing
EN 2243-5:2005 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 5: Ageing tests
EN 12280-2:2002 Rubber- or plastics-coated fabrics - Accelerated ageing tests - Part 2: Physical ageing: effect of light or weathering

Danish Standards Foundation, aging test

DS/EN 12280-1:1998 Rubber- or plastics-coated fabrics - Accelerated ageing tests - Part 1: Heat ageing
DS/EN 12280-3:2002 Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 3: Environmental ageing
DS/EN ISO 2440/A1:2010 Flexible and rigid cellular polymeric materials - Accelerated ageing tests
DS/EN ISO 2440:2000 Flexible and rigid cellular polymeric materials - Accelerated ageing tests
DS/EN 2243-5:1992 Aerospace series. Structural adhesives. Test methods. Part 5: Ageing tests
DS/EN 12280-2:2002 Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 2: Physical ageing: effect of light or weathering
DS/EN 50483-5:2009 Test requirements for low voltage aerial bundled cable accessories - Part 5: Electrical ageing test
DS/CEN/TS 14999:2013 Adhesives for thermoplastic piping systems - Accelerated ageing test in storage container
DS/EN 2243-5:2005 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 5: Ageing tests
DS/EN 4057-306:2007 Aerospace series - Cable ties for harnesses - Test methods - Part 306: Heat ageing test
DS/EN 927-3:2012 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3: Natural weathering test
DS/IEC 60493-1:2012 Guide for the statistical analysis of ageing test data - Part 1: Methods based on mean values of normally distributed test results

Lithuanian Standards Office , aging test

LST EN 12280-1-2000 Rubber- or plastics- coated fabrics - Accelerated ageing tests - Part 1: Heat ageing
LST EN 12280-3-2002 Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 3: Environmental ageing
LST EN ISO 2440:2001 Flexible and rigid cellular polymeric materials - Accelerated ageing tests (ISO 2440:1997)
LST EN 12280-2-2002 Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 2: Physical ageing: effect of light or weathering
LST EN 50483-5-2009 Test requirements for low voltage aerial bundled cable accessories - Part 5: Electrical ageing test
LST EN 73+AC-2000 Wood preservatives - Accelerated ageing tests of treated wood prior to biological testing - Evaporative ageing procedure
LST EN 2243-5-2005 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 5: Ageing tests
LST EN 4057-306-2007 Aerospace series - Cable ties for harnesses - Test methods - Part 306: Heat ageing test
LST EN ISO 2440:2001/A1:2010 Flexible and rigid cellular polymeric materials - Accelerated ageing tests - Amendment 1 (ISO 2440:1997/Amd 1:2010)
LST EN 927-3-2012 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3: Natural weathering test

PL-PKN, aging test

PN E04160-31-1991 Electric cables Test methods Accelerated ageing in air

Guangdong Provincial Standard of the People's Republic of China, aging test

DB44/T 1100.5-2015 Artificial stone test methods part 5 salt spray aging test

Japanese Industrial Standards Committee (JISC), aging test

JIS B 7757:1995 Forced air circulation oven type thermal accelerated aging testers
JIS A 1501:2021 Accelerated weathering test method for unplasticized polyvinyl chloride windows and doors by metal halide lamp
JIS K 6404-12:1999 Testing methods for rubber-or plastics-coated fabrics -- Part 12: Accelerated ageing tests
JIS K 7363:1999 Plastics -- Instrumental determination of radiant exposure in weathering tests -- General guidance and basic test method
JIS K 6257:1993 Accelerated aging test methods for vulcanized rubber

Professional Standard - Electron, aging test

SJ/T 11855-2022 Photovoltaic UV aging test chamber irradiation performance test method

ES-AENOR, aging test

AT-ON, aging test

ONORM EN 2243-5-1992 Aerospace series - Structural adhesives - Test methods -Ageing tests

HU-MSZT, aging test

MSZ 105/15-1981

American Society for Testing and Materials (ASTM), aging test

ASTM D5427-03(2007) Standard Practice for Accelerated Aging of Inflatable Restraint Fabrics
ASTM D5427-02 Standard Practice for Accelerated Aging of Inflatable Restraint Fabrics
ASTM G169-01 Standard Guide for Application of Basic Statistical Methods to Weathering Tests
ASTM D5427-03 Standard Practice for Accelerated Aging of Inflatable Restraint Fabrics
ASTM G16-95(1999)e1 Standard Guide for Applying Statistics to Analysis of Corrosion Data
ASTM G169-01(2021) Standard Guide for Application of Basic Statistical Methods to Weathering Tests
ASTM G169-01(2013) Standard Guide for Application of Basic Statistical Methods to Weathering Tests
ASTM G169-01(2008)e1 Standard Guide for Application of Basic Statistical Methods to Weathering Tests
ASTM C732-17 Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants
ASTM D5721-08(2013) Standard Practice for Air-Oven Aging of Polyolefin Geomembranes
ASTM D4798/D4798M-11 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
ASTM D4798/D4798M-11(2021) Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
ASTM D4798-08 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
ASTM D4798/D4798M-10 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
ASTM D4798-01 Standard Test Method for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
ASTM D4798-00 Standard Test Method for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
ASTM D4798-04 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
ASTM D4798/D4798M-09 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
ASTM G147-96 Standard Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests
ASTM D4798/D4798M-11(2016) Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
ASTM D6551-00 Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Xenon-Arc Exposure Apparatus
ASTM D4364-02 Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight
ASTM D6551/D6551M-05 Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Xenon-Arc Exposure Apparatus
ASTM D4364-05 Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight
ASTM D4364-94 Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight
ASTM D4364-13 Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight
ASTM D1669-03 Standard Practice for Preparation of Test Panels for Accelerated and Outdoor Weathering of Bituminous Coatings
ASTM D3434-00(2018) Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives
ASTM D4799/D4799M-08(2013)e1 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method)
ASTM D3434-00(2013) Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives

JSAE - Society of Automotive Engineers of Japan@ Inc., aging test

JASO M351-1998 Automotive parts - Accelerated weathering testing method by xenon-arc lamp for exterior parts

Institute of Electrical and Electronics Engineers (IEEE), aging test

IEEE 775-1993 Guide for designing multistress aging tests of electrical insulation in a radiation environment
IEEE Std 775-1993 IEEE Guide for Designing Multistress Aging Tests of Electrical Insulation in a Radiation Environment
IEEE 1407-2007 Guide for Accelerated Aging Tests for Medium-Voltage (5 kV?5 kV) Extruded Electric Power Cables Using Water-Filled Tanks

Xinjiang Provincial Standard of the People's Republic of China, aging test

DB65/T 3653-2013 Artificial accelerated aging test method of fluorescent ultraviolet lamp for agricultural drip irrigation belt

IT-UNI, aging test

Professional Standard - Energy, aging test

NB/T 42004-2013 Test method for voltage-endurance test on groundwall insulation of stator coil of high voltage AC machines
NB/T 42005-2013 Test method for thermal voltage-endurance testing on groundwall insulation of stator coil of high voltage AC machines

Society of Automotive Engineers (SAE), aging test

SAE ARP6299-2020 Procedure for Thermal Aging Test for Polyol Ester Gas Turbine Engine Lubricants

Professional Standard - Medicine, aging test

YY/T 0681.1-2009 Test methods for sterile medical device package.Part 1:Test guide for accelerated aging

CENELEC - European Committee for Electrotechnical Standardization, aging test

EN 50483-5:2009 Test requirements for low voltage aerial bundled cable accessories - Part 5: Electrical ageing test

国家药监局, aging test

YY/T 0681.1-2018 Sterile Medical Device Packaging Test Methods Part 1: Guidelines for Accelerated Aging Tests

International Electrotechnical Commission (IEC), aging test

IEC 60811-401:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
IEC 60811-401:2017 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
IEC 60811-412:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb
IEC 60811-401:2012/AMD1:2017 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven; Amendment 1
IEC 62884-3:2018 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 3: Frequency aging test methods

Electronic Components, Assemblies and Materials Association, aging test

ECA EIA-364-24B-1998 TP-24B MAINTENANCE AGING TEST PR OCEDURE FOR ELECTRICAL CONNECTORS

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., aging test

IEEE 1407-1998 Trial-Use Guide for Accelerated Aging Tests for Medium-Voltage Extruded Electric Power Cables Using Water-Filled Tanks

未注明发布机构, aging test

BS 903-A19:1986(1999) Methods of testing vulcanized rubber — Part A19 : Heat resistance and accelerated ageing tests — [ ISO title : Rubber, vulcanized — Accelerated ageing or heat - resistance tests ]

工业和信息化部/国家能源局, aging test

JB/T 12926-2016 Multi-factor aging test method and evaluation method for marine variable frequency motor stator winding

European Association of Aerospace Industries, aging test

AECMA PREN 4057-306-2001 Aerospace Series Cable Ties for Harnesses Test Methods Part 306: Heat Ageing Test Edition P 1
AECMA PREN 2243-5-2001 Aerospace Series Non-Metallic Materials Structural Adhesives Test Method Part 5: Ageing Tests Edition P 1

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, aging test

PREN 2243-5-2001 Aerospace Series Non-Metallic Materials Structural Adhesives Test Method Part 5: Ageing Tests (Edition P 1)

Aerospace, Security and Defence Industries Association of Europe (ASD), aging test

ASD-STAN PREN 4057-306-2001 Aerospace Series Cable Ties for Harnesses Test Methods Part 306: Heat Ageing Test (Edition P 1)
ASD-STAN PREN 2243-5-2001 Aerospace Series Non-Metallic Materials Structural Adhesives Test Method Part 5: Ageing Tests (Edition P 1)

AASHTO - American Association of State Highway and Transportation Officials, aging test

T 367-2017 Standard Method of Test for Accelerated Aging of Hot-Poured Asphalt Crack Sealant Using a Vacuum Oven

CEN - European Committee for Standardization, aging test

PREN 927-3-2018 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3: Natural weathering test

Professional Standard - Nuclear Industry, aging test

EJ/T 820-1994 Regulation and Selection of Accelerated Aging Test Procedures for Quality Appraisal of Electrical Items in Nuclear Power Plant Safety System

VN-TCVN, aging test

TCVN 6614-1-2-2008 Common test methods for insulating and sheathing materials of electric cables and optical cables.Part 1-2: Methods for general application.Thermal ageing methods