ZH
RU
ES

Magnetic and non-magnetic metals

Magnetic and non-magnetic metals, Total:480 items.

In the international standard classification, Magnetic and non-magnetic metals involves: Iron and steel products, Linear and angular measurements, Powder metallurgy, Surface treatment and coating, Non-destructive testing, Magnetic materials, Conducting materials, Electrical and electronic testing, Testing of metals, Tea. Coffee. Cocoa, Non-ferrous metals, Insulating fluids, Animal feeding stuffs, Food products in general, Ferrous metals, Cereals, pulses and derived products, Electrical wires and cables, Shipbuilding and marine structures in general, Electromagnetic compatibility (EMC), Protection against fire, Rubber and plastics products, Bearings, Vocabularies, Sugar. Sugar products. Starch, Fasteners, Electricity. Magnetism. Electrical and magnetic measurements, Aerospace fluid systems and components, Electrical accessories, Fluid power systems, Rubber, Corrosion of metals, Insulating materials, Components and accessories for telecommunications equipment, Earth-moving machinery, Materials for aerospace construction, Occupational safety. Industrial hygiene, Mining equipment, Seals, glands, Materials and articles in contact with foodstuffs, Kitchen equipment, Water quality, Pipeline components and pipelines, Industrial furnaces, Fluid storage devices, Valves, Nuclear energy engineering, Cork and cork products, Printed circuits and boards, Gas and steam turbines. Steam engines, Lubricants, industrial oils and related products, Structures of buildings, Galvanic cells and batteries, Capacitors, Fibre optic communications, Welding, brazing and soldering, Test conditions and procedures in general, Aerospace engines and propulsion systems, Terminology (principles and coordination), Medical equipment, Graphic technology.

TR-TSE, Magnetic and non-magnetic metals

TS 2311-1976 NON—MAGNETIC METALLIC AND V?TREOUS OR PORCELAIN ENAMEL COATINGS ON MAGNETIC BASI? METALS—MEASUREMENT OF COATING THICKNESS—MAGNETIC METHOD
TS 2674-1977 Non - Conductive Coatings On Non-Magnetic Basis Metals-Measurement Of Coating Thickness - Eddy Current Method
TS 1968-1975 VULCANIZED RUBBER - DETERMINATION OF ADHESION TO METAL -

Korean Agency for Technology and Standards (KATS), Magnetic and non-magnetic metals

KS D 0070-2002 Method of test for magnetic properties of amorphous metals using single sheet specimen
KS D 0070-2002(2022) Method of test for magnetic properties of amorphous metals using single sheet specimen
KS C 2117-1996 Testing method for complex dielectric constant of nonmetallic magnetic materials at high frequencies
KS D 0070-2002(2017) Method of test for magnetic properties of amorphous metals using single sheet specimen
KS C 2117-1996(2021) Testing method for complex dielectric constant of nonmetallic magnetic materials at high frequencies
KS C IEC 60404-8-6:2002 Magnetic materials-Part 8-6:Specification for individual materials-Soft magnetic metallic materials
KS C IEC 60404-8-6:2015 Magnetic materials－Part 8－6：Specification for individual materials－Soft magnetic metallic materials
KS C 2117-1996(2016) Testing method for complex dielectric constant of nonmetallic magnetic materials at high frequencies
KS C IEC 60404-8-6:2018 Magnetic materials — Part 8-6: Specifications for individual materials — Soft magnetic metallic materials
KS D ISO 2360-2002(2017) Non-conductive coatings on non-magnetic basis metals－Measurement of coating thickness－Amplitude-sensitive eddy current method
KS D ISO 2360-2002(2022) Non-conductive coatings on non-magnetic basis metals－Measurement of coating thickness－Amplitude-sensitive eddy current method
KS B 0145-1996 Mechanical properties of non-ferrous metal fasteners
KS C IEC 60404-6:2002 Magnetic materials-Part 6:Methods ofmeasurement of the magnetic properties of isotropic nickel-iron soft magnetic alloys, types E1, E3 and E4
KS V ISO 15540:2021 Ships and marine technology — Fire resistance of non-metallic hose assemblies and non-metallic compensators — Test methods
KS V ISO 15541:2021 Ships and marine technology — Fire resistance of non-metallic hose assemblies and non-metallic compensators — Requirements for the test bench
KS B ISO 21507:2015 Earth-moving machinery — Performance requirements for nonmetallic fuel tanks
KS B ISO 21507:2012 Earth-moving machinery-Performance requirements for non-metallic fuel tanks
KS B ISO 21507-2015(2020) Earth-moving machinery — Performance requirements for nonmetallic fuel tanks
KS C IEC 60519-11:2012 Safety in electroheat installations－Part 11：Particular requirements for installations using the effect of electromagnetic forces on liquid metals
KS B ISO 9974-3:2004 Connections for general use and fluid power-Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing-Part 3:Stud ends with metal-to-metal sealing (type B)
KS C IEC 61951-2:2021 Secondary cells and batteries containing alkaline or other non-acid electrolytes — Secondary sealed cells and batteries for portable applications — Part 2: Nickel-metal hydride
KS B ISO 11114-2:2015 Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 2: Non-metallic materials
KS B ISO 11114-2-2015(2020) Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 2: Non-metallic materials

American Society for Testing and Materials (ASTM), Magnetic and non-magnetic metals

ASTM D7091-22 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
ASTM A894/A894M-00(2011)e1 Standard Test Method for Saturation Magnetization or Induction of Nonmetallic Magnetic Materials
ASTM B499-09(2021)e1 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
ASTM B499-09(2014) Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
ASTM B499-96(2002) Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
ASTM B499-96 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
ASTM B49-15 Standard Specification for Copper Rod for Electrical Purposes
ASTM B49-08 Standard Specification for Copper Rod Drawing Stock for Electrical Purposes
ASTM B49-08a Standard Specification for Copper Rod Drawing Stock for Electrical Purposes
ASTM B499-09 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
ASTM D7091-20 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
ASTM D7091-21 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
ASTM D3288-97 Standard Test Methods for Magnet-Wire Enamels
ASTM A883/A883M-01 Standard Test Method for Ferrimagnetic Resonance Linewidth and Gyromagnetic Ratio of Nonmetallic Magnetic Materials (Withdrawn 2006)
ASTM A894/A894M-00 Standard Test Method for Saturation Magnetization or Induction of Nonmetallic Magnetic Materials
ASTM D7091-13 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
ASTM D3288-03 Standard Test Methods for Magnet-Wire Enamels
ASTM D3353-98 Standard Test Methods for Fibrous-Insulated Magnet Wire
ASTM D3353-04 Standard Test Methods for Fibrous-Insulated Magnet Wire
ASTM A893/A893M-03 Standard Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies
ASTM A893/A893M-03(2022) Standard Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies
ASTM D2307-05 Standard Test Method for Thermal Endurance of Film-Insulated Round Magnet Wire
ASTM A893-97 Standard Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies
ASTM A893/A893M-03(2008) Standard Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies
ASTM A893/A893M-03(2015) Standard Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies
ASTM A894/A894M-00(2005) Standard Test Method for Saturation Magnetization or Induction of Nonmetallic Magnetic Materials
ASTM C904-01(2012) Standard Terminology Relating to Chemical-Resistant Nonmetallic Materials
ASTM C904-01(2018) Standard Terminology Relating to Chemical-Resistant Nonmetallic Materials
ASTM A289/A289M-97 Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators
ASTM A289/A289M-97(2003) Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators
ASTM A28-21 Specification for Lap-Welded and Seamless Steel Boiler Tubes for Locomotives
ASTM A289/A289M-97(2018) Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators
ASTM D3251-04 Standard Test Method for Thermal Endurance Characteristics of Electrical Insulating Varnishes Applied Over Film-Insulated Magnet Wire
ASTM D3251-04(2009) Standard Test Method for Thermal Endurance Characteristics of Electrical Insulating Varnishes Applied Over Film-Insulated Magnet Wire
ASTM D3251-04(2013) Standard Test Method for Thermal Endurance Characteristics of Electrical Insulating Varnishes Applied Over Film-Insulated Magnet Wire
ASTM D3251-03 Standard Test Method for Thermal Endurance Characteristics of Electrical Insulating Varnishes Applied Over Film-Insulated Magnet Wire
ASTM D6412/D6412M-99 Standard Specification for Epoxy (Flexible) Adhesive for Bonding Metallic and Nonmetallic Materials
ASTM D6412/D6412M-99(2005) Standard Specification for Epoxy (Flexible) Adhesive for Bonding Metallic and Nonmetallic Materials
ASTM D6412/D6412M-99(2012) Standard Specification For Epoxy (Flexible) Adhesive For Bonding Metallic And Nonmetallic Materials
ASTM D6412/D6412M-99(2020) Standard Specification for Epoxy (Flexible) Adhesive For Bonding Metallic And Nonmetallic Materials
ASTM E2148-06 Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety
ASTM F147-87(2003) Standard Test Method for Flexibility of Non-Metallic Gasket Materials
ASTM F147-87(2009) Standard Test Method for Flexibility of Non-Metallic Gasket Materials
ASTM F147-87(1997) Standard Test Method for Flexibility of Non-Metallic Gasket Materials
ASTM B244-09(2021) Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
ASTM B244-09 Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
ASTM B244-09(2014) Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
ASTM A1004/A1004M-99(2004) Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members
ASTM A1004/A1004M-99(2009) Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Frami
ASTM A1004/A1004M-99(2018) Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Frami
ASTM B244-97 Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
ASTM B244-97(2002) Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
ASTM F147-87(2017) Standard Test Method for Flexibility of Non-Metallic Gasket Materials
ASTM D3251-99 Standard Test Method for Thermal-Aging Characteristics of Electrical Insulating Varnishes Applied Over Film-Insulated Magnet Wire
ASTM F336-02(2016) Standard Practice for Design and Construction of Nonmetallic Enveloped Gaskets for Corrosive Service
ASTM A1004/A1004M-99 Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members
ASTM D4388-97 Standard Specification for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes
ASTM D4388-02 Standard Specification for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes
ASTM D4388-08 Standard Specification for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes
ASTM D4388-13 Standard Specification for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes
ASTM G141-96 Standard Guide for Addressing Variability in Exposure Testing on Nonmetallic Materials
ASTM G141-09(2021) Standard Guide for Addressing Variability in Exposure Testing of Nonmetallic Materials
ASTM G141-09 Standard Guide for Addressing Variability in Exposure Testing on Nonmetallic Materials
ASTM G141-09(2013) Standard Guide for Addressing Variability in Exposure Testing of Nonmetallic Materials
ASTM C313-78(1983) Method of Test for Adherence of Porcelain Enamel and Ceramic Coatings to Sheet Metal

Association Francaise de Normalisation, Magnetic and non-magnetic metals

NF EN ISO 2178:2016 Revêtements métalliques non magnétiques sur métal de base magnétique - Mesurage de l'épaisseur du revêtement - Méthode magnétique
NF A91-321:2005 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method.
NF EN ISO 2361:1995 Revêtements électrolytiques de nickel sur métal de base magnétique et non magnétique - Mesurage de l'épaisseur - Méthode magnétique.
NF EN ISO 21968:2019 Revêtements métalliques non magnétiques sur des matériaux de base métalliques et non métalliques - Mesurage de l'épaisseur de revêtement - Méthode par courants de Foucault sensible aux variations de phase
NF A91-321*NF EN ISO 21968:2019 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method
NF A95-431:2013 Hardmetals - Determination of (the magnetization) coercivity
NF C28-901-8-6:2009 Magnetic materials - Part 8-6 : specifications for individual materials - Soft magnetic metallic materials.
NF C28-901-8-6*NF EN 60404-8-6:2017 Magnetic materials - Part 8-6 : specifications for individual materials - Soft magnetic metallic materials
NF A91-113:1995 Non-conductive coatings on non-magnetic basis metals. Measurement of coating thickness. Eddy current method.
NF A91-113*NF EN ISO 2360:2017 Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method
NF C28-906:2004 Magnetic materials - Part 6 : methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 200 kHz by the use of ring specimens.
XP CEN/TS 17308:2019 Pneus usagés non réutilisables (PUNR) - Fils métalliques - Détermination de la teneur en matériaux non métalliques
NF E58-118*NF ISO 21507:2010 Earth-moving machinery - Performance requirements for non-metallic fuel tanks
NF ISO 21507:2010 Engins de terrassement - Exigences de performance pour les réservoirs de carburant non métalliques
NF C28-906/A1:2021 Magnetic materials - Part 6 : methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens
NF C28-906*NF EN IEC 60404-6:2018 Magnetic materials - Part 6 : methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens
NF EN IEC 60404-6:2018 Matériaux magnétiques - Partie 6 : méthodes de mesure des propriétés magnétiques des matériaux métalliques et des matériaux en poudre magnétiquement doux, aux fréquences comprises entre 20 Hz et 100 kHz, sur des éprouvettes en forme de tore
NF EN IEC 60404-6/A1:2021 Matériaux magnétiques - Partie 6 : méthodes de mesure des propriétés magnétiques des matériaux métalliques et des matériaux en poudre magnétiquement doux, aux fréquences comprises entre 20 Hz et 100 kHz, sur des éprouvettes en forme de tore
NF A05-412-2*NF EN 12501-2:2003 Protection of metallic materials against corrosion - Corrosion likelihood in soil - Part 2 : low alloyed and non alloyed ferrous materials
NF ISO 23345:2021 Joaillerie, bijouterie et métaux précieux - Confirmation du titre de métal précieux par analyse non destructive ED-XRF
NF EN IEC 60404-16:2018 Matériaux magnétiques - Partie 16 : méthodes de mesure des propriétés magnétiques des bandes en alliage amorphe à base de fer à l'aide de l'essai sur tôle unique
NF A05-210*NF EN ISO 9223:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Classification, determination and estimation.
NF T60-197:1993 Fluides d'usinage aqueux et non aqueux - Stabilité au stockage courte et longue durée
NF ISO 240:2016 Fraises à métaux - Dimensions d'interchangeabilité avec les arbres porte-fraises ou les mandrins porte-fraise
NF EN IEC 62153-4-7:2021 Méthodes d'essai des câbles métalliques et autres composants passifs - Partie 4-7 : compatibilité électromagnétique (CEM) - Méthode d'essai pour mesurer l'impédance de transfert, ZT, et l'affaiblissement d'écrantage, aS, ou l'affaiblisse...
NF EN IEC 62153-4-16:2021 Méthodes d'essai des câbles métalliques et autres composants passifs - Partie 4-16 : compatibilité électromagnétique (CEM) - Extension de la plage de fréquences à des fréquences supérieures pour l'impédance de transfert et à des fréquenc...
NF EN IEC 62153-4-15:2021 Méthodes d'essais des câbles métalliques et autres composants passifs - Partie 4-15 : compatibilité électromagnétique (CEM) - Méthode d'essai pour le mesurage de l'impédance de transfert et de l'affaiblissement d'écran - ou de l'affaibli...
NF A05-211*NF EN ISO 9224:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Guiding values for the corrosivity categories.
NF T60-186:1993 Fluides d'usinage aqueux - Évaluation des propriétés anticorrosives au contact des métaux ferreux
NF EN 10341:2006 Bandes et tôles magnétiques laminées à froid en aciers non-allié et en acier allié livrées à l'état semi-fini
NF EN 15048-2:2016 Boulonnerie de construction métallique non précontrainte - Partie 2 : aptitude à l'emploi
NF C79-641*NF EN 60519-11:2007 Safety in electroheat installations - Part 11 : particular requirements for installations using the effect of electromagnetic forces on liquid metals
NF E29-648-2:2013 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: non-metallic materials
NF EN ISO 11114-2:2021 Bouteilles à gaz - Compatibilité des matériaux des bouteilles et des robinets avec les contenus gazeux - Partie 2 : matériaux non métalliques
NF EN 60707:2000 Inflammabilité des matériaux solides non métalliques soumis à des sources d'allumage à flamme - Liste des méthodes d'essai
NF E29-648-2*NF EN ISO 11114-2:2021 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2 : non-metallic materials

RO-ASRO, Magnetic and non-magnetic metals

STAS SR EN 23326-1995 Hardmetals, Determination of (the magnetization) coercivity
STAS 11281/1-1979 Metals tests. DETERMINATION OF WELDING METALS COMPATIBILITY WITH THE BASIC METAL FOR CAST WELDING Covered electrodes welding.
STAS 11281/2-1979 Mct&ls tests DETERMINATION OF WELDING METALS COMPATIBILITY WITH THE BASIC METAL FOR CAST WELDING Flux shielded arc welding
STAS 11393-1991 Non-conductive coatings on non-magnetic basis metals. Coating thickness determination by eddy current method
STAS 7043/3-1986 Non-metallic coatings (inorganic) ANOD1ZING OF ALUMINIUAI AND ITS ALLOYS Chccking of continuity of coating
STAS 12341/1-1985 DETERMINATION OF THE DELTA FERR1TE CONTENT IN A US TENITIC STAINLESS WELD METAL Magnetic contact method. Technical requirements
STAS 10373-1975 NON-METALLIC MATERIALS USED IN SHIPBUILDING Determination of fire resistance of fire-proofed materials

European Committee for Standardization (CEN), Magnetic and non-magnetic metals

EN ISO 21968:2019 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method (ISO 21968:2019)
EN ISO 21968:2005 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phasesensitive eddy-current method
EN 23326:1993 Hardmetals - Determination of (the Magnetization) Coercivity (ISO 3326: 1975)
EN ISO 2360:1995 Non-Conductive Coatings on Non-Magnetic Basis Metals - Measurement of Coating Thickness - Eddy Current Method (ISO 2360 : 1982)
EN ISO 2360:2017 Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method
EN ISO 2360:2003 Non-conductive coatings on non-magnetic electrically conductive basis materials - Measurement of coating thickness - Amplitude-sensitive eddy current method ISO 2360:2003
EN ISO 8044:1999 Corrosion of Metals and Alloys - Basic Terms and Definitions ISO 8044: 1999
EN ISO 9223:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Classification, determination and estimation (ISO 9223:2012)
EN ISO 9224:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Guiding values for the corrosivity categories (ISO 9224:2012)
EN ISO 9974-3:2000 Connections for General Use and Fluid Power - Ports and Stud Ends with ISO 261 Threads with Elastomeric or Metal-To-Metal Sealing - Part 3: Stud Ends with Metal-To-Metal Sealing (Type B) ISO 9974-3:1996
EN ISO 11114-2:2021 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO 11114-2:2021)
EN ISO 9225:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Measurement of environmental parameters affecting corrosivity of atmospheres (ISO 9225:2012)
EN 12875-2:2001 Mechanical dishwashing resistance of utensils - Part 2: Inspection of non-metallic articles
EN ISO 1179-4:2008 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-to-metal sealing (type B) (ISO 1179-4:2007)

British Standards Institution (BSI), Magnetic and non-magnetic metals

BS EN ISO 21968:2005 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method
BS EN ISO 21968:2019 Non-magnetic metallic coatings on metallic and non- metallic basis materials. Measurement of coating thickness. Phase-sensitive eddy-current method
BS EN ISO 3326:2013 Hardmetals. Determination of (the magnetization) coercivity
BS EN 60404-8-6:2009 Magnetic materials. Specifications for individual materials. Soft magnetic metallic materials
BS ISO 24497-1:2020 Non-destructive testing. Metal magnetic memory - Vocabulary and general requirements
BS 6404-8.6:1988 Magnetic materials - Individual materials - Specification for soft magnetic metallic materials
BS EN 60404-8-6:2017 Tracked Changes. Magnetic materials. Specifications for individual materials. Soft magnetic metallic materials
BS ISO 15540:2016 Ships and marine technology. Fire resistance of non-metallic hose assemblies and non-metallic compensators. Test methods
PD IEC TS 62153-4-1:2014+A1:2020 Metallic communication cable test methods. Electromagnetic compatibility (EMC). Introduction to electromagnetic screening measurements
BS ISO 15541:2016 Ships and marine technology. Fire resistance of non-metallic hose assemblies and non-metallic compensators. Requirements for the test bench
18/30358882 DC BS ISO 24497-2. Non-destructive testing. Metal magnetic memory. Part 2. Inspection of welded joints
18/30358879 DC BS ISO 24497-1. Non-destructive testing. Metal magnetic memory. Part 1. Vocabulary and general requirements
BS EN ISO 2360:2003 Non-conductive coatings on non-magnetic electrically conductive basis materials - Measurement of coating thickness - Amplitude-sensitive eddy current method
BS EN 60404-6:2003 Magnetic materials. Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 200 kHz by the use of ring specimens
BS EN ISO 4022:2018 Tracked Changes. Permeable sintered metal materials. Determination of fluid permeability
BS EN IEC 60404-6:2018+A1:2021 Magnetic materials - Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens
BS IEC 60533:2015 Electrical and electronic installations in ships — Electromagnetic compatibility (EMC) — Ships with a metallic hull
BS EN 12501-2:2003 Protection of metallic materials against corrosion - Corrosion likelihood in soil - Low alloyed and non alloyed ferrous materials
BS ISO 21507:2010 Earth-moving machinery. Performance requirements for non-metallic fuel tanks
BS EN 12875-2:2002 Mechanical dishwashing resistance of domestic utensils - Inspection of non-metallic articles
BS 6920-2.1:2000+A3:2008 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water — Part 2: Methods of test — Section 2.1: Samples for testing
BS 6920-2.1:2014 Suitability of non-metallic materials and products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Methods of test. Samples for testing
BS IEC 62153-4-3:2014 Metallic communication cable test methods. Electromagnetic compatibility (EMC). Surface transfer impedance. Triaxial method
BS IEC 62153-4-17:2018 Metallic cables and other passive components. Test methods. Electromagnetic compatibility (EMC). Reduction Factor
BS IEC 62153-4-3:2013 Metallic communication cable test methods. Electromagnetic compatibility (EMC). Surface transfer impedance. Triaxial method
BS EN 60519-11:2007 Safety in electroheat installations. Particular requirements for installations using the effect of electromagnetic forces on liquid metals
BS EN ISO 11114-2:2013 Gas cylinders. Compatibility of cylinder and valve materials with gas contents. Non-metallic materials
20/30403973 DC BS EN 60404-6 AMD1. Magnetic materials. Part 6 Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens
BS 6920-2.6:2000 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water - Methods of test - The extraction of metals
BS 6920-2.6:2000+A2:2014 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water.Methods of test.The extraction of metals
BS EN ISO 9223:2012 Corrosion of metals and alloys. Corrosivity of atmospheres. Classification, determination and estimation
19/30320252 DC BS IEC 62742. Electrical and electronic installations in ships. Electromagnetic compatibility. Ships with a non-metallic hull
BS EN ISO 9974-3:2000 Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Stud ends with metal-to-metal sealing (type B)
BS ISO 10587:2000 Metallic and other inorganic coatings - Test for residual embrittlement in both metallic-coated and uncoated externally-threaded articles and rods - Inclined wedge method
BS IEC 62153-4-8:2018 Metallic cables and other passive components. Test methods - Electromagnetic compatibility (EMC). Capacitive coupling admittance
BS EN ISO 9224:2012 Corrosion of metals and alloys. Corrosivity of atmospheres. Guiding values for the corrosivity categories
BS EN 62153-4-2:2004 Metallic communication cable test methods - Electromagnetic compatibility - Screening and coupling attenuation - Injection clamp method
BS ISO 17248:2015 Corrosion of metals and alloys. Test method for high temperature corrosion testing of metallic materials by embedding in salt, ash, or other solids
BS 6920-2.2.1:2000+A2:2008 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water — Part 2: Methods of test — Section 2.2: Odour and flavour of water — Subsection 2.2.1: Ge
BS EN ISO 11114-2:2021 Tracked Changes. Gas cylinders. Compatibility of cylinder and valve materials with gas contents. Non-metallic materials
BS EN ISO 9225:2012 Corrosion of metals and Alloys. Corrosivity of Atmospheres. Measurement of environmental parameters affecting corrosivity of atmospheres
BS ISO 17224:2015 Corrosion of metals and alloys. Test method for high temperature corrosion testing of metallic materials by application of a deposit of salt, ash, or other substances
BS IEC 62153-4-9:2018+A1:2020 Metallic communication cable test methods - Electromagnetic compatibility (EMC). Coupling attenuation of screened balanced cables, triaxial method
BS IEC 62153-4-10:2015 Metallic communication cable test methods. Electromagnetic compatibility (EMC). Transfer impedance and screening attenuation of feed-throughs and electromagnetic gaskets. Double coaxial test method
BS IEC 62153-4-10:2015+A1:2020 Metallic communication cable test methods - Electromagnetic compatibility (EMC). Transfer impedance and screening attenuation of feed-throughs and electromagnetic gaskets. Double coaxial test method

International Organization for Standardization (ISO), Magnetic and non-magnetic metals

ISO 21968:2005 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method
ISO 21968:2019 Non-magnetic metallic coatings on metallic and non-metallic basis materials — Measurement of coating thickness — Phase-sensitive eddy-current method
ISO 15540:2016 Ships and marine technology - Fire resistance of non-metallic hose assemblies and non-metallic compensators - Test methods
ISO 15541:2016 Ships and marine technology - Fire resistance of non-metallic hose assemblies and non-metallic compensators - Requirements for the test bench
ISO 9223:1992 Corrosion of metals and alloys; corrosivity of atmospheres; classification
ISO 21507:2010 Earth-moving machinery - Performance requirements for non-metallic fuel tanks
ISO 21507:2005 Earth-moving machinery - Performance requirements for non-metallic fuel tanks
ISO 6509:1981 Corrosion of metals and alloys; Determination of dezincification resistance of brass
ISO 9225:1992 Corrosion of metals and alloys; corrosivity of atmospheres; measurement of pollution
ISO 9223:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Classification, determination and estimation
ISO 9224:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Guiding values for the corrosivity categories
ISO 9224:1992 Corrosion of metals and alloys; corrosivity of atmospheres; guiding values for the corrosivity categories
ISO 9225:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Measurement of environmental parameters affecting corrosivity of atmospheres
ISO 11846:1995 Corrosion of metals and alloys - Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys
ISO 11114-2:2013 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials
ISO 11114-2:2021 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials
ISO 9328-2:2011 Steel flat products for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steels with specified elevated temperature properties
ISO 9328-2:2018 Steel flat products for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steels with specified elevated temperature properties

German Institute for Standardization, Magnetic and non-magnetic metals

DIN EN ISO 21968:2005 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method (ISO 21968:2005); German version EN ISO 21968:2005
DIN EN ISO 21968:2020-02 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method (ISO 21968:2019); German version EN ISO 21968:2019
DIN 30911-7:1990 Sintered metal materials; sint-testing procedures; part 7: determination of softmagnetic properties
DIN IEC 60533:2021-05 Electrical and electronic installations in ships - Electromagnetic compatibility (EMC) - Ships with a metallic hull (IEC 60533:2015)
DIN EN ISO 2360:2017 Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method (ISO 2360:2017)
DIN 30911-7:1990-10 Sintered metal materials; sint-testing procedures; part 7: determination of softmagnetic properties
DIN EN 60404-6:2004 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range of 20 Hz to 200 kHz by the use of ring specimens (IEC 60404-6:2003); German version EN 60404-6:20
DIN EN ISO 8044:1999 Corrosion of metals and alloys - Basic terms and definitions (ISO 8044:1999); Trilingual version EN ISO 8044:1999
DIN IEC 60533:2019 Electrical and electronic installations in ships - Electromagnetic compatibility (EMC) - Ships with a metallic hull (IEC 60533:2015); Text in German and English
DIN EN 12501-2:2003 Protection of metallic materials against corrosion - Corrosion likelihood in soil - Part 2: Low alloyed and non alloyed ferrous materials; German version EN 12501-2:2003
DIN ISO 4003:1990-10 Permeable sintered metal materials; determination of bubble test pore size; identical with ISO 4003:1977
DIN EN 12501-2:2003-08 Protection of metallic materials against corrosion - Corrosion likelihood in soil - Part 2: Low alloyed and non alloyed ferrous materials; German version EN 12501-2:2003
DIN EN 60404-6 Berichtigung 1:2009 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range of 20 Hz to 200 kHz by the use of ring specimens (IEC 60404-6:2003); German version EN 60404-6:20
DIN IEC/TR 62153-4-1:2013 Metallic communication cable test methods - Part 4-1: Electromagnetic compatibility (EMC) - Introduction to electromagnetic (EMC) screening measurements (IEC 46/438/CD:2012)
DIN EN 60404-8-6:2009 Magnetic materials - Part 8-6: Specifications for individual materials - Soft magnetic metallic materials (IEC 60404-8-6:1999 + A1:2007); German version EN 60404-8-6:2009
DIN EN ISO 1179-4:2008 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-to-metal sealing (type B) (ISO 1179-4:2007); German version EN ISO 1179

SE-SIS, Magnetic and non-magnetic metals

SIS SMS 2971-1974 Non-magnetic coatings on magnetic basis metals. Measurement of coating thickness. Magnetic method
SIS SS-ISO 2360:1983 Non-conductive coatings on non mag- netic basis metals - Measurement of coating thickness - Eddy current method
MNC 341-1992 Metallic materials. Testing. Non-destructive methods. Summary

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Magnetic and non-magnetic metals

GB/T 31554-2015 Non-magnetic metallic coatings on metallic and non-metallic basismaterials.Measurement of coating thickness.Phase-sensitive eddy-current method
GB/T 5509-2008 Inspection of grain and oils.Determination of magnetic metals content of flours
GB/T 4957-2003 Non-conductive coatings on non-magnetic basis metals--Measurement of coating thickness-Eddy current
GB/T 5509-1985 Inspection of grain and oilseeds--Methods for determination of magnetic metals content of flours
GB/T 19346-2003 Measuring method of magnetic properties at alternative current for amorphous and nanocrystalline soft magnetic alloys
GB/T 3658-2022 Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens
GB/T 27795-2011 Test method for corrosion testing of non-metallic gaskets
GB/T 14834-1993 Rubber, vulcanized. Determination of adhesion to, and corrosion of, metals
GB/T 14834-2009 Rubber,vulcanized or thermoplastic.Determination of tendency to adhere to and corrode metals
GB/T 25608-2010 Earth-moving machinery.Performance requirements for non-metallic fuel tanks
GB/T 20671.6-2006 Classification system and test methods for nonmetallic gasket materials-Part6:Standard test method for adhesion of gasket materials to metal surfaces
GB/T 20671.8-2006 Classification system and test methods for nonmetallic gasket materials-Part8:Standard test method for flexibility of non-metallic gasket materials
GB/T 15825.1-1995 Sheet metal formability and test methods--Formability and indexes
GB/T 1453-1987 Test method for flatwise compression properties of nonmetal sandwich constructions or cores
GB/T 15825.6-1995 Sheet metal formability and test methods--Conical cup test
GB/T 15825.7-1995 Sheet metal formability and methods--Earing test
GB/T 16886.15-2022 Biological evaluation of medical devices—Part 15: Identification and quantification of degradation products from metals and alloys
GB/T 16886.15-2003 Biological eveluation of medical devices--Part 15: Identification and quantification of degradation products from metals and alloys
GB/T 15825.3-1995 Sheet metal formability and test methods--Drawing and drawing load test
GB/T 15825.2-1995 Sheet metal formability and test methods--General test rules
GB/T 17497.2-2012 Decorative products by flexographic printing.Part 2:Plastic film and foil

ES-UNE, Magnetic and non-magnetic metals

UNE-EN ISO 21968:2020 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method (ISO 21968:2019)
UNE-EN 60404-8-6:2017 Magnetic materials - Part 8-6: Specifications for individual materials - Soft magnetic metallic materials (Endorsed by Asociación Española de Normalización in June of 2017.)
UNE-EN 62153-4-7:2016/A1:2018 Metallic communication cable test methods. Part 4-7: Electromagnetic compatibility (EMC). Test method for measuring of transfer impedance ZT and screening attenuation aS or coupling attenuation aC of connectors and assemblies up to and above 3 GHz. Tri...
UNE-EN 62153-4-7:2016/AC:2016-05 Metallic communication cable test methods - Part 4-7: Electromagnetic compatibility (EMC) - Test method for measuring of transfer impedance ZT and screening attenuation as or coupling attenuation ac of connectors and assemblies up to and above 3 GHz - ...
UNE-EN 62153-4-7:2016 Metallic communication cable test methods - Part 4-7: Electromagnetic compatibility (EMC) - Test method for measuring of transfer impedance ZT and screening attenuation as or coupling attenuation ac of connectors and assemblies up to and above 3 GHz - ...
UNE-EN IEC 60404-6:2018/A1:2021 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens (Endorsed by Asociación Española de Normalizac...
UNE-EN IEC 60404-6:2018 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens (Endorsed by Asociación Española de Normalizac...
UNE-EN IEC 60404-6:2018/AC:2018-12 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens (Endorsed by Asociación Española de Normalizac...
UNE-EN IEC 62153-4-16:2022 Metallic cables and other passive components test methods - Part 4-16: Electromagnetic compatibility (EMC) - Extension of the frequency range to higher frequencies for transfer impedance and to lower frequencies for screening attenuation measurements u...
UNE-EN IEC 62153-4-7:2022 Metallic cables and other passive components test methods - Part 4-7: Electromagnetic compatibility (EMC) -Test method for measuring of transfer impedance ZT and screening attenuation aS or coupling attenuation aC of connectors and assemblies - Triaxia...
UNE-EN ISO 11114-2:2022 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO 11114-2:2021)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Magnetic and non-magnetic metals

GB/T 35393-2017 Non-destructive testing—Practice for electromagnetic (eddy-current) sorting of nonferrous metals
GB/T 35385-2017 Non-destructive testing—Practice for electromagnetic (eddy-current) sorting of ferrous metals
GB/T 33207-2016 Non-destructive testing—Test method for the accumulation of oxide scale in the metal tube in service by magnetic testing
GB/T 25608-2017 Earth-moving machinery—Performance requirements for non-metallic fuel tanks

American National Standards Institute （ANSI), Magnetic and non-magnetic metals

ANSI/ASTM A883:2001 Test Method for Ferrimagnetic Resonance Linewidth and Gyromagnetic Ratio of Nonmetallic Magnetic Materials
ANSI/ASTM D3353:2010 Test Methods for Fibrous-Insulated Magnet Wire
ASME NM.3.3-2022 Nonmetallic Materials, Part 3 - Properties
ANSI/ASTM A893:1997 Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies
ANSI/ASME NM.3.3-2020 Nonmetallic Materials Part 3 - Properties
ANSI/UL 719-2015 UL Standard for Safety Nonmetallic-Sheathed Cables (Thirteenth Edition)
ANSI/UL 719-2013 Standard for Safety for Nonmetallic-Sheathed Cables
ANSI/ASTM D3251:2004 Test Method for Thermal-Aging Characteristics of Electrical Insulating Varnishes Applied Over Film-Insulated Magnet Wire (10.02)
ANSI/ASME NM.3.1-2020 Nonmetallic Materials Part 1 - Thermoplastic Material Specifications
ANSI/UL 1696-2009 Standard for Safety for Nonmetallic Mechanical Protection Tubing (NMPT)
ASME NM.3.1-2022 Nonmetallic Materials Part 1 - Thermoplastic Material Specifications
ANSI/UL 1313-2012 Standard for Safety for Nonmetallic Safety Cans for Petroleum Products
ANSI/ASME NM.3.2-2020 Nonmetallic Materials Part 2 - Reinforced Thermoset Plastic Material Specifications
ANSI/UL 514C-2011 Standard for Safety for Nonmetallic Outlet Boxes, Flush-Device Boxes, and Covers
ASME NM.3.2-2022 Nonmetallic Materials Part 2 - Reinforced Thermoset Plastic Material Specifications

Danish Standards Foundation, Magnetic and non-magnetic metals

DS/EN ISO 21968:2005 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method
DS/ISO 2360:1983 Non-conductive coatings on non-magnetic basis metals. Measurement of coating thickness. Eddy current method
DS/EN ISO 2360:1995 Non-conductive coatings on non-magnetic basis metals - Measurement of coating thickness - Eddy curent method
DS/EN 60404-8-6:2009 Magnetic materials - Part 8-6: Specifications for individual materials - Soft magnetic metallic materials
DS/IEC 62742:2021 Electrical and electronic installations in ships – Electromagnetic compatibility (EMC) – Ships with a non-metallic hull
DS/EN 60404-6:2003 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 200 kHz by the use of ring specimens
DS/EN IEC 60404-6:2021 Magnetic materials – Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens
DS/EN ISO 11114-2:2013 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials

AENOR, Magnetic and non-magnetic metals

UNE-EN ISO 21968:2006 Non-magnetic metallic coatings on metallic and non-metallic basis materials. Measurement of coating thickness. Phase sensitive eddy-current method (ISO 21968:2005)
UNE-ISO 21507:2011 Earth-moving machinery -- Performance requirements for non-metallic fuel tanks
UNE-EN 60404-6:2004 Magnetic materials -- Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 200 kHz by the use of ring specimens

Taiwan Provincial Standard of the People's Republic of China, Magnetic and non-magnetic metals

CNS 7636-1981 Method of Test for Saturation Magnetization on Saturation Induction of Nonmetallic Magnetic Materials
CNS 7634-1981 Method of Test for Complex Dielectric Constant of Noumetallic Magnetic Materials at Microwave Fequencies

Lithuanian Standards Office , Magnetic and non-magnetic metals

LST EN ISO 21968:2005 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method (ISO 21968:2005)
LST 1539-1998 Confectionery. Methods of determination of ash and metallomagnetic admixture content
LST EN 60404-8-6-2009 Magnetic materials - Part 8-6: Specifications for individual materials - Soft magnetic metallic materials (IEC 60404-8-6:1999 + A1:2007)
LST EN 60404-6-2004 Magnetic materials. Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 200 kHz by the use of ring specimens (IEC 60404-6:2003)

BE-NBN, Magnetic and non-magnetic metals

NBN-EN 23326-1993 Hardmetals. Determination of (the magnetization) coercivity (ISO 3326: 1975)
NBN I 07-004-1986
NBN A 23-114-1983

Professional Standard - Agriculture, Magnetic and non-magnetic metals

NY/T 1960-2010 Determination of magnetic metals content in tea
SN/T 5496-2023 Evaluation of Fatigue Behavior of Metallic Materials by Nonlinear Ultrasonic Method

RU-GOST R, Magnetic and non-magnetic metals

GOST R 52081-2003 Non-destructive testing. Method of metal magnetic memory. Terms and definitions
GOST 13496.9-1996 Mixed feeds. Methods for determination of metallomagnetic impurity
GOST 13496.9-1973 Mixed feed. Methods for the determination of metallomagnetic impurities
GOST 30415-1996 Steel. Nondestructive testing of mechanical properties and microstructure of steel products by magnetic method
GOST 20239-1974 Flour, groats and bran. Determination method of metallomagnetic admixture
GOST R 52005-2003 Non-destructive testing. Method using metal magnetic memory. General requirements
GOST R ISO 4386-1-1994 Plain bearings. Metallic multilayer plain. Non-destructive ultrasonic testing of bond for bearing metal layer and backing
GOST 12.3.008-1975 Occupational safety standards system. Metal and non-metal inorganic coating. General safety requirements
GOST 23055-1978 Non-destructive testing. Fusion welding of metals. Welds classification by radiography testing results

国家市场监督管理总局、中国国家标准化管理委员会, Magnetic and non-magnetic metals

GB/T 41120-2021 Non-destructive testing—Test method for non-ferromagnetic metallic component pulsed eddy current testing
GB/T 20671.6-2020 Classification system and test methods for nonmetallic gasket materials—Part 6: Standard test method for adhesion of gasket materials to metal surfaces
GB/T 35033-2018 Measurement method on conductive properties of electromagnetic shielding material and bonding impedance of metal material for 30MHz to 1GHz

Standard Association of Australia （SAA）, Magnetic and non-magnetic metals

AS 4544:2005 Non-destructive testing - Eddy current testing for the detection of surface flaws - Ferromagnetic and non-ferromagnetic metallic products
IEC 60533:2015 RLV Electrical and electronic installations in ships — Electromagnetic compatibility (EMC) — Ships with a metallic hull
AS ISO 21507:2021 Earth-moving machinery — Performance requirements for non-metallic fuel tanks

Japanese Industrial Standards Committee (JISC), Magnetic and non-magnetic metals

JIS H 7152:1996 Methods of measurement of the magnetic properties of amorphous metals by means of a single sheet tester
JIS F 8081:2022 Electrical and electronic installations in ships -- Electromagnetic compatibility (EMC) -- Ships with a metallic hull
JIS A 8335:2009 Earth-moving machinery -- Performance requirements for non-metallic fuel tanks
JIS A 8335:2017 Earth-moving machinery -- Performance requirements for non-metallic fuel tanks

Professional Standard - Aerospace, Magnetic and non-magnetic metals

QJ 1072-1986 Eddy current method for measuring the thickness of nonconductive coatings on nonmagnetic base metals
QJ 967-1986 Test method for medium-temperature steady-state heat transfer characteristics of rigid non-metallic insulation materials
QJ 966-1986 Test method for low-temperature steady-state heat transfer characteristics of rigid non-metallic insulation materials

International Electrotechnical Commission (IEC), Magnetic and non-magnetic metals

IEC 60404-8-6:1999+AMD1:2007 CSV Magnetic materials - Part 8-6: Specifications for individual materials - Soft magnetic metallic materials
IEC 62742:2021 Electrical and electronic installations in ships - Electromagnetic compatibility (EMC) - Ships with a non-metallic hull
IEC 60404-8-6:2007 Magnetic materials - Part 8-6: Specifications for individual materials - Soft magnetic metallic materials
IEC 60404-8-6:1999 Magnetic materials - Part 8-6: Specifications for individual materials - Soft magnetic metallic materials
IEC 60404-8-6:1986 Magnetic materials. Part 8 : Specifications for individual materials. Section Six - Soft magnetic metallic materials
IEC 60404-8-6:1999/AMD1:2007 Magnetic materials - Part 8-6: Specification for individual materials - Soft magnetic metallic materials; Amendment 1
IEC 60404-6:2018+AMD1:2021 CSV Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specim
IEC 60404-6:2018 RLV Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specim
IEC TS 62153-4-1:2014/AMD1:2020 Metallic communication cable test methods - Part 4-1: Electromagnetic compatibility (EMC) - Introduction to electromagnetic (EMC) screening measurements
IEC TS 62153-4-1:2014+AMD1:2020 CSV Metallic communication cable test methods - Part 4-1: Electromagnetic compatibility (EMC) - Introduction to electromagnetic (EMC) screening measurements
IEC 60404-6:2018/AMD1:2021 Amendment 1 - Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use
IEC TS 62153-4-1:2014 Metallic communication cable test methods - Part 4-1: Electromagnetic compatibiliy (EMC) - Introduction to electromagnetic screening measurements
IEC 60404-6:2018 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens
IEC 60404-6:2003/COR1:2009 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range of 20 Hz to 200 kHz by the use of ring specimens; Corrigendum 1
IEC 60404-6:2003 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range of 20 Hz to 200 kHz by the use of ring specimens
IEC 60404-6:2021 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens
IEC TR 62153-4-1:2010 Metallic communication cable test methods - Part 4-1: Electromagnetic compatibility (EMC) - Introduction to electromagnetic (EMC) screening measurements
IEC TR 62153-4-1:2007 Metallic communication cable test methods - Part 4-1: Electromagnetic compatibility (EMC) - Introduction to electromagnetic (EMC) screening measurements
IEC 60533:2015 Electrical and electronic installations in ships - Electromagnetic compatibility (EMC) - Ships with a metallic hull
IEC 62153-4-8:2006 Metallic communication cable test methods - Part 4-8: Electro Magnetic Compatibility (EMC) - Capacitive coupling admittance
IEC 62153-4-6:2006 Metallic communication cable test methods - Part 4-6: Electro Magnetic Compatibility (EMC) - Surface transfer impedance - Line injection method
IEC 60519-11:2007 Safety in electroheat installations - Part 11: Particular requirements for installations using the effect of electromagnetic forces on liquid metals
IEC 62153-4-3:2006 Metallic communication cable test methods - Part 4-3: Electromagnetic compatibility (EMC) - Surface transfer impedance - Triaxial method
IEC 62153-4-3:2013 Metallic communication cable test methods - Part 4-3: Electromagnetic Compatibility (EMC) - Surface transfer impedance - Triaxial method
IEC 60404-8-3:1985 Magnetic materials. Part 8 : Specifications for individual materials. Section Three - Specification for cold-rolled magnetic non-alloyed steel strip delivered in the semi-processed state

Professional Standard - Ferrous Metallurgy, Magnetic and non-magnetic metals

YB/T 4188-2015 Test method for the content of magnetic metallic iron in steel slag
YB/T 4188-2009 Determination method of magnetic metal iron content in steel slag

YU-JUS, Magnetic and non-magnetic metals

JUS C.A6.035-1989 Non-conductlve coatlng on non-magvetic basis metals. Measurement of coatlng thickness. Eddy current method
JUS M.C3.328-1988 Plain bearings. MetaliJe multilayer plain bearings. Non-destructive ultrasonic testing of boud for bearing metal layer tbicknesses above Z mm

American Society of Mechanical Engineers (ASME), Magnetic and non-magnetic metals

ASME NM.3.3-2020 Nonmetallic Materials Part 3 - Properties
ASME NM.3.1-2020 Nonmetallic Materials Part 1 - Thermoplastic Material Specifications
ASME NM.3.2-2020 Nonmetallic Materials Part 2 - Reinforced Thermoset Plastic Material Specifications

National Metrological Technical Specifications of the People's Republic of China, Magnetic and non-magnetic metals

JJF 1516-2015 Calibration Specification for Electrical Conductivity Standards of Nonferrous Metals

CENELEC - European Committee for Electrotechnical Standardization, Magnetic and non-magnetic metals

EN 60404-8-6:2009 Magnetic materials - Part 8-6: Specifications for individual materials - Soft magnetic metallic materials

European Committee for Electrotechnical Standardization（CENELEC）, Magnetic and non-magnetic metals

EN 60404-8-6:2017 Magnetic materials - Part 8-6: Specifications for individual materials - Soft magnetic metallic materials
EN 60404-6:2003 Magnetic materials Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 200 kHz by the use of ring specimens
EN IEC 60404-6:2018 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens

United States Navy, Magnetic and non-magnetic metals

NAVY MIL-HDBK-270 A-1991 METALLIC MATERIALS FOR LOW MAGNETIC APPLICATIONS, MAGNETIC PERMEABILITY AND ELECTRICAL CONDUCTIVITY, CHARACTERISTICS OF (METRIC)
NAVY HH-P-31 F-1987 PACKING AND LAGGING MATERIAL, FIBROUS GLASS METALLIC AND PLAIN CLOTH AND TAPE [Use In Lieu Of: NAVY HH-P-0031 E]

NEMA - National Electrical Manufacturers Association, Magnetic and non-magnetic metals

NEMA FB 2.10-2000 Selection and Installation Guidelines for Fittings for Use with Non-Flexible Metallic Conduit or Tubing (Rigid Metal Conduit@ Intermediate Metal Conduit@ and Electrical Metallic Tubing)
NEMA RV 3-2010 APPLICATION AND INSTALLATION GUIDELINES FOR FLEXIBLE AND LIQUIDTIGHT FLEXIBLE METAL AND NONMETALLIC CONDUITS
NEMA PRP 4-2009 Expansion Fittings for PVC Rigid Nonmetallic Conduit
NEMA PRP 3-2009 Expansion Epoxy Based Fittings for RTRC Rigid Nonmetallic Conduit

GOSTR, Magnetic and non-magnetic metals

GOST R ISO 24497-3-2009 Non-destructive testing. Metal magnetic memory method. Part 3. Inspection of welded joints

KR-KS, Magnetic and non-magnetic metals

KS C IEC 60404-8-6-2018 Magnetic materials — Part 8-6: Specifications for individual materials — Soft magnetic metallic materials
KS V ISO 15540-2021 Ships and marine technology — Fire resistance of non-metallic hose assemblies and non-metallic compensators — Test methods
KS V ISO 15541-2021 Ships and marine technology — Fire resistance of non-metallic hose assemblies and non-metallic compensators — Requirements for the test bench
KS C IEC 61951-2-2021 Secondary cells and batteries containing alkaline or other non-acid electrolytes — Secondary sealed cells and batteries for portable applications — Part 2: Nickel-metal hydride

(U.S.) Ford Automotive Standards, Magnetic and non-magnetic metals

FORD ESF-M99G115-A-2006 MAGNET, NONMETALLIC BINDER ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD S-M32J110-B-2006 METALLIC ACRYLIC ENAMEL, EXTERIOR QUALITY ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M25P4-A-1978 FLAMMABILITY REQUIREMENTS, NON- METALLIC MATERIALS, FMVSS NO. 302.
FORD WSK-M11P54-A-2013 PERFORMANCE, SEMISTRUCTURAL ADHESIVE, POLYURETHANE, METAL TO METAL, TWO COMPONENT ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD S-M32J110-C-2006 METALLIC ACRYLIC ENAMEL, EXTERIOR QUALITY ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on S-M32J110-B)

IT-UNI, Magnetic and non-magnetic metals

National Electrical Manufacturers Association（NEMA), Magnetic and non-magnetic metals

NEMA FB 2.10-2003 Selection and Installation Guidelines for Fittings for Use with Non-Flexible Metallic Conduit or Tubing (Rigid Metal Conduit, Intermediate Metal Conduit, and Electrical Metallic Tubing)
NEMA FB 2.10-2007 Selection and Installation Guidelines for Fittings for Use with Non-Flexible Metallic Conduit or Tubing (Rigid Metal Conduit, Intermediate Metal Conduit, and Electrical Metallic Tubing)
NEMA FB 2.10-2013 Selection and Installation Guidelines For Fittings for Use With Non-Flexible Metallic Conduit or Tubing (Rigid Metal Conduit, Intermediate Metal Conduit, and Electrical Metallic Tubing)
NEMA FB 2.10-2012 Selection and Installation Guidelines Fittings for Use with Non-Flexible Metallic Conduit or Tubing (Rigid Metal Conduit, Intermediate Metal Conduit, and Electrical Metallic Tubing)
NEMA RV 3-2012 Application and Installation Guidelines for Flexible and Liquidtight Flexible Metal and Nonmetallic Conduits
NEMA RV 3-2014 Application and Installation Guidelines for Flexible and Liquidtight Flexible Metal and Nonmetallic Conduits

Aerospace Industries Association/ANSI Aerospace Standards, Magnetic and non-magnetic metals

AIA/NAS NASM16228-2012 NUT, SELF-LOCKING, HEXAGON, THIN, UNC-3B, NON METALLIC INSERT, AUSTENITIC CORROSION RESISTANT STEEL, NONMAGNETIC, 250 °F (Rev 1)
AIA/NAS NASM16218-2011 SCREW, MACHINE, FLAT COUNTERSUNK HEAD, SLOTTED, COPPER-SILICON ALLOY, UNC-2A, NONMAGNETIC
AIA/NAS NASM16218-2016 SCREW, MACHINE, FLAT COUNTERSUNK HEAD, SLOTTED, COPPER-SILICON ALLOY, UNC-2A, NONMAGNETIC (Rev 2)
AIA/NAS NASM16206-1999 Bolts, Machine, Hexagon Head, Regular Semi-Finished, Aluminum Alloy, Unc-2A, Non-Magnetic

Professional Standard - Commodity Inspection, Magnetic and non-magnetic metals

SN/T 4059-2014 Determination of magnetic metal particles in paprika condiment for export

CZ-CSN, Magnetic and non-magnetic metals

CSN 05 1310-1986 WRldabiIity of metals and its assesment
CSN 03 8110-1984 Protection against corrosion Metals, alloys, metallic and non-metallic inorganic coatings Methods of atmospheric corrosion field tests
CSN 03 8157-1984 Protective against corrosion. Metallic and non-metallic coatings. Measurement of thickness by non-destructive methods. General demands
CSN 03 8132-1983 Protection against corrosion. Metalls, alloys, metallic coatings and non-me-tallic anoiganic coatings. Neutral salt spray test /NSS test/
CSN 64 0125-1953
CSN 03 8158-1985 Protection acrainst corrosion. Metallic and non-metallic unorganic coatings. Method of determination of reflectivity
CSN 03 8104-1986 Protection.against corrosion. Metals and alloys. Methods of evaluation of corro-sion tests
CSN 64 0124-1953
CSN 03 8209-1983 Tempórary protection agents against corrosion of metals. Classification and marking

AIA/NAS - Aerospace Industries Association of America Inc., Magnetic and non-magnetic metals

NASM16228-2012 NUT@ SELF-LOCKING@ HEXAGON@ THIN@ UNC-3B@ NON METALLIC INSERT@ AUSTENITIC CORROSION RESISTANT STEEL@ NONMAGNETIC@ 250 °F (Rev 1)
NASM16218-1998 Screws@ Machine@ Flat Countersunk Head@ Slotted@ Copper-Silicon Alloy@ UNC-2A@ Nonmagnetic
NASM16206-1999 Bolts@ Machine@ Hexagon Head@ Regular Semi-Finished@ Aluminum Alloy@ Unc-2A@ Non-Magnetic
NASM16218-2016 SCREW@ MACHINE@ FLAT COUNTERSUNK HEAD@ SLOTTED@ COPPER-SILICON ALLOY@ UNC-2A@ NONMAGNETIC (Rev 2)
NASM16218-2011 SCREW@ MACHINE@ FLAT COUNTERSUNK HEAD@ SLOTTED@ COPPER-SILICON ALLOY@ UNC-2A@ NONMAGNETIC (Rev 1)

HU-MSZT, Magnetic and non-magnetic metals

IN-BIS, Magnetic and non-magnetic metals

Society of Automotive Engineers (SAE), Magnetic and non-magnetic metals

SAE AS1501B-1992 HOSE, AIR DUCT, FLEXIBLE, NONMETALLIC, AIRCRAFT
SAE AS1501-1978 HOSE, AIR DUCT, FLEXIBLE, NONMETALLIC, AIRCRAFT
SAE AS1501C-2013 Hose, Air Duct, Flexible, Nonmetallic, Aircraft
SAE AS1501A-1986 HOSE, AIR DUCT, FLEXIBLE, NONMETALLIC, AIRCRAFT
SAE AS1501D-2020 Hose, Air Duct, Flexible, Nonmetallic, Aircraft
SAE AS1501C-1994 HOSE, AIR DUCT, FLEXIBLE, NONMETALLIC, AIRCRAFT
SAE AMS2685-1974 WELDING, METAL ARC, INERT GAS Non-Consumable Electrode (GTAW Method)
SAE AMS2685A-1986 WELDING, METAL ARC, INERT GAS Non-Consumable Electrode (GTAW Method)
SAE AS1504A-2013 HOSE, AIR DUCT, FLEXIBLE, HELICAL, NONMETALLIC WIRE, SUPPORTED (EXPOSED), SELF EXTINGUISHING
SAE AS1504-2011 HOSE, AIR DUCT, FLEXIBLE, HELICAL, NONMETALLIC WIRE, SUPPORTED (EXPOSED), SELF EXTINGUISHING
SAE AS5833-2006 MALE FERRULE, THREADLESS-FLEXIBLE, FIXED CAVITY, CURRENT CARRYING, SELF BONDING, SWAGED FSC 4730

Professional Standard - Machinery, Magnetic and non-magnetic metals

JB/T 11606-2013 Non-destructive testing instruments.Metal magnetic memory instrument verification

VN-TCVN, Magnetic and non-magnetic metals

TCVN 5405-1991 Corrosion protection.Metals, alloys, metallic and non-metallic inorganic coatings.Accelerate testing in salt-spray cabinet of neutral natrium chloride solution (method NSS)

Underwriters Laboratories (UL), Magnetic and non-magnetic metals

UL 1660-2001 Liquid-tight flexible nonmetallic conduit
UL 1660 BULLETIN-2002 UL Standard for Safety Liquid-Tight Flexible Nonmetallic Conduit
UL 1660-2014 UL Standard for Safety Liquid-Tight Flexible Nonmetallic Conduit (Fifth Edition)
UL 1660-2019 UL Standard for Safety Liquid-Tight Flexible Nonmetallic Conduit (Sixth Edition)
UL 3-1999 UL Standard for Safety Flexible Nonmetallic Tubing for Electric Wiring (Tenth Edition)

Professional Standard - Aviation, Magnetic and non-magnetic metals

HB 7475-2017 Qualification and certification of aviation non-metal performance testing personnel
HB 7475-1996 Qualification certification of aviation non-metal performance testing personnel
HB 5470-1991 Requirements for the combustion performance of non-metallic materials in the cabin of civil aircraft
HB 5470-2014 Requirements of burning performance for cabin interior nonmetallic material of civil aircraft

CO-ICONTEC, Magnetic and non-magnetic metals

Aerospace, Security and Defence Industries Association of Europe (ASD), Magnetic and non-magnetic metals

ASD-STAN PREN 2243-2-2001 Aerospace Series Non-Metallic Materials Structural Adhesives Test Method Part 2: Peel Metal-Metal (Edition P 1)

Professional Standard-Safe Production, Magnetic and non-magnetic metals

AQ 2019-2008 Safety inspecting-testing specification of parachute in mine shaft hoisting system for metal and nonmetal mines

Hebei Provincial Standard of the People's Republic of China, Magnetic and non-magnetic metals

DB13/T 2520-2017 Safety inspection and inspection catalog of equipment and facilities with high risk in use in metal and nonmetal mines

Shandong Provincial Standard of the People's Republic of China, Magnetic and non-magnetic metals

DB37/T 2387-2013 Safety inspection and inspection catalog of equipment and facilities with high risk in use in metal and nonmetal mines

Professional Standard - Light Industry, Magnetic and non-magnetic metals

QB/T 3834-1999 Thickness testing method of the metal deposits and conversion coatings for the light industrial products.Magnetic method

Defense Logistics Agency, Magnetic and non-magnetic metals

DLA MIL-PRF-83421 D-2006 CAPACITORS, FIXED, METALLIZED, PLASTIC FILM DIELECTRIC, (DC, AC, OR DC AND AC), HERMETICALLY SEALED IN METAL CASES OR CERAMIC CASES, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR

U.S. Military Regulations and Norms, Magnetic and non-magnetic metals

ARMY MIL-PRF-55514/11 C VALID NOTICE 2-2013 Capacitors, Fixed, Metalized Plastic Dielectric, DC, in Nonmetal Cases, Established Reliability, Styles CFR26 and CFR27
ARMY MIL-PRF-55514 F SUPP 1-2005 CAPACITORS, FIXED, PLASTIC (OR METALLIZED PLASTIC) DIELECTRIC, DC OR DC-AC, IN NONMETAL CASES, NON-ESTABLISHED AND ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR
ARMY MIL-PRF-55514 F-2005 CAPACITORS, FIXED, PLASTIC (OR METALLIZED PLASTIC) DIELECTRIC, DC OR DC-AC, IN NONMETAL CASES, NON-ESTABLISHED AND ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR
ARMY MIL-PRF-55514/9 C-2013 CAPACITORS, FIXED, METALLIZED PLASTIC DIELECTRIC, DC, IN NONMETAL CASES, ESTABLISHED RELIABILITY, STYLE CFR13 AND CFR14
ARMY MIL-PRF-55514/4 F VALID NOTICE 2-2012 Capacitors, Fixed, Metallized Plastic Dielectric, DC, in Nonmetal Cases, Established Reliability and Non-Established Reliability, Styles CFR05 and CFR06

IFI/FASTNR - Industrial Fastener Institute, Magnetic and non-magnetic metals

124-2002 Test Procedure for the Performance of Nonmetallic Resistant Element Prevailing-Torque Screws
124-1996 Test Procedure for the Performance of Nonmetallic Resistant Element Prevailing-Torque Screws
155-2002 Test Procedure for the Performance of Nonmetallic Resistant Element Prevailing-Torque Nuts
155-2005 Test Procedure for the Performance of Nonmetallic Resistant Element Prevailing-Torque Nuts
524-2002 Test Procedure for the Performance of Metric Nonmetallic Element Prevailing-Torque Screws

Anhui Provincial Standard of the People's Republic of China, Magnetic and non-magnetic metals

DB34/T 2844.3-2017 Design criteria for structural components of large low-temperature superconducting magnets Part 3: Non-metallic components

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Magnetic and non-magnetic metals

GJB/Z 18A-2005 Data reduction and presentation of mechanical property for metallic materials

Military Standard of the People's Republic of China-General Armament Department, Magnetic and non-magnetic metals

GJB/Z 18A-2020 Data processing and expression of mechanical properties of metal materials

CU-NC, Magnetic and non-magnetic metals

NC 12-04-26-1989 Standards System for Protection Against Corrosion. Metallic and Non-Metallic Coatings. General Requirements of Non-destructive Methods for Thickness Measurement
NC 12-04-47-1987 Standards System for Protection Aqainst Corrosion. Motallic and Non-Metallic Inorqanic Coatinqs. Destructive Methods for Thickness Control

NATO - North Atlantic Treaty Organization, Magnetic and non-magnetic metals

STANAG 4436-1993 Electro-Magnetic Compatibility Testing Procedure and Requirements for Naval Electrical and Electronic Equipment (Surface Ship@ Non-Metallic Hull) (ED 1 AMD 0; To obtain please contact your national Defense Standardization Office or the NATO Standardizatio

European Association of Aerospace Industries, Magnetic and non-magnetic metals

AECMA PREN 4107-1999 Aerospace Series Non-Metallic Materials Structural Adhesive Systems Foaming Adhesives Technical Specification

Aerospace Industries Association, Magnetic and non-magnetic metals

AIA NAS 1619-1981 (Inactive)Cleaner, Metal, Soaktype, Water Based (Rev. 2)
AIA NASM16218-1998 Screws, Machine, Flat Countersunk Head, Slotted, Copper-Silicon Alloy, UNC-2A, Nonmagnetic FSC 5305
AIA NASM16206-1999 Bolts, Machine, Hexagon Head, Regular Semi-Finished, Aluminum Alloy, Unc-2A, Non-Magnetic FSC 5306

国家能源局, Magnetic and non-magnetic metals

NB/T 42152-2018 General technical requirements for nonlinear metal oxide resistors

SG-SPRING SG1, Magnetic and non-magnetic metals

SS 375-2-6-2015 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water - Part 2:6: Methods of test -The extraction of metals

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Magnetic and non-magnetic metals

IPC TM-650 2.6.13-1985 Assessment of Susceptibility to Metallic Dendritic Growth: Uncoated Printed Wiring

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Magnetic and non-magnetic metals

ASHRAE PH-97-5-2-1997 Thermal Breaking Systems for Metal Stud Walls - Can Metal Stud Walls Perform as Well as Wood Stud Walls?

SAE - SAE International, Magnetic and non-magnetic metals

SAE AS1504A-1986 Hose@ Air Duct@ Flexible@ Helical@ Nonmetallic Wire@ Supported (Exposed)@ Self Extinguishing

AWS - American Welding Society, Magnetic and non-magnetic metals

A4.2-1974 STANDARD PROCEDURES FOR CALIBRATING MAGNETIC INSTRUMENTS TO MEASURE THE DELTA FERRITE CONTENT OF AUSTENITIC STAINLESS STEEL WELD METAL
A4.2-1986 STANDARD PROCEDURES FOR CALIBRATING MAGNETIC INSTRUMENTS TO MEASURE THE DELTA FERRITE CONTENT OF AUSTENITIC STAINLESS STEEL WELD METAL

Professional Standard - Electron, Magnetic and non-magnetic metals

SJ 20084-1992 Capacitors,fixed,metallized polyethylene-terephthalate filme dielectric d.c.in nonmetal cases,established reliability,CLK233 type, detail specification for
SJ 20082-1992 Capacitors,fixed,metallized polypropylene filme dielectric d.c.in nonmetal cases,established reliability,CBBK24 type detail specification for
SJ 20081-1992 Capacitors,fixed,double metallized polypropylene filme dielectric d.c.in nonmetal cases,established reliability,CBBK23 type detail specification for

Professional Standard - Post and Telecommunication, Magnetic and non-magnetic metals

YD/T 1181.2-2008 Characteristics of Non Metal Reinforcement for Optical Fiber Cables.Part 2:Aramid Yarne

Association of German Mechanical Engineers, Magnetic and non-magnetic metals

DVS 2909-2-1980 Friction welding of non-metallic materials; friction weldability and material selection

工业和信息化部, Magnetic and non-magnetic metals

YD/T 1181.6-2020 Characteristics of non-metallic reinforcements for optical cables Part 6: Glass fiber tapes
YD/T 1181.4-2015 Characteristics of non-metallic reinforcements for optical cables Part 4: Glass fiber yarn
YD/T 1181.2-2021 Characteristics of non-metallic strength members for optical cables Part 2: Aramid yarn

未注明发布机构, Magnetic and non-magnetic metals

DIN EN ISO 11114-2:2022 Gas cylinders – Compatibility of cylinder and valve materials with gas contents – Part 2: Non-metallic materials

GM North America, Magnetic and non-magnetic metals

GM GM6189P-1989 Test Procedure for the Locking Ability Performance of Nonmetallic Locking Element Type Prevailing Torque Lock Screws

Professional Standard - Railway, Magnetic and non-magnetic metals

TB/T 2559-1995 Terminology for fire performance test of non-metallic materials used in railway passenger cars

Group Standards of the People's Republic of China, Magnetic and non-magnetic metals

T/JMBX 0224-2022 Test method for flame retardancy of finished non-metallic parts of electric bicycles