ZH
RU
ES
UV laser power
UV laser power, Total:285 items.
In the international standard classification, UV laser power involves: Organic chemicals, Optoelectronics. Laser equipment, Aerospace electric equipment and systems, Inks. Printing inks, Protection against crime, Analytical chemistry, Machine tools, Optics and optical measurements, Applications of information technology, Chipless working equipment, Equipment for petroleum and natural gas industries, Document imaging applications, Products of the textile industry, Edible oils and fats. Oilseeds, Glass, Protective equipment, Electrical and electronic testing, Linear and angular measurements, Radiation measurements, Fibre optic communications, Medical equipment, Plastics, Radiation protection, Metrology and measurement in general, Rubber and plastics products, Elements of buildings, Solar energy engineering, Packaging materials and accessories.
National Metrological Verification Regulations of the People's Republic of China, UV laser power
KR-KS, UV laser power
Military Standard of the People's Republic of China-General Armament Department, UV laser power
SAE - SAE International, UV laser power
Society of Automotive Engineers (SAE), UV laser power
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, UV laser power
- GB/T 14571.4-2008 Ethylene glycol for industrial use.Determination of ultraviolet transmittance.Ultraviolet spectrophotometric method
- GB/T 13863-1992 Testing method for laser radiant power
- GB/T 18754-2002 UV-excitation fluorecent Anti-counterfeiting intaglio printing ink
- GB/T 13863-2011 Test methods for laser radiation power and its instability
- GB/T 11153-1989 Parameters testing method of laser power meter in low range
- GB/T 6360-1995 Specification for laser radiation power and energy measuring equipment
- GB/T 11153-2012 Test methods of laser power meter in loveer-range
- GB/T 13864-1992 Testing method for laser radiant power stability
- GB/T 11297.5-1989 Test method for continuous lasing threshold,slope efficiency and output power of Nd:YAG laser rods
- GB/T 17001.1-2011 Anti-counterfeiting printing ink.Part 1:Ultraviolet fluorescent anti-counterfeiting printing ink
- GB/T 24664-2009 Evaluation and measurement method for beam quality of high power laser system for industry manufacturing
- GB/T 41643-2022 Guidance and safety requirements for high power laser manufacturing equipments
- GB/T 7962.17-2010 Test methods of colourless optical glass.Part 17:Autocollimation test method for refractive index in the ultraviolet and infrared wave band
- GB/T 17121-1997 Anti-counterfeiting stamp-ink. Part 1: Technical requirements of UV-excitation flourescent anti-counterfeiting stamp-ink
- GB/T 7962.18-1987 Colourless optical glass test methods--Autocollimation test method for refractive index in the ultraviolet and infrared wave band
- GB/T 17001.1-1997 Anti-counterfeiting ink. Part 1:Technical requirement of ultraviolet fluorecent ink
- GB/T 7962.17-1987 Colourless optical glass test methods--Least deviation angular test method for refractive index in the ultraviolet and infrared wave band
Korean Agency for Technology and Standards (KATS), UV laser power
- KS C 6706-2002 TEST METHODS OF OPTICAL POWER METERS FOR LASER BEAM
- KS C 6706-1993(1998) TEST METHODS OF OPTICAL POWER METERS FOR LASER BEAM
- KS C 6705-2002 MEASURING METHODS FOR LASER OUTPUT POWER
- KS B ISO 11151-1:2013 Lasers and laser-related equipment ?; Standard optical components ?; Part 1: Components for the UV, visible and near-infrared spectral ranges
- KS B ISO 11151-1:2003 Lasers and laser-related equipment-Standard optical components-Part 1:Components for the UV, visible and near-infrared spectral ranges
- KS B ISO 11151-1:2015 Lasers and laser-related equipment ― Standard optical components ― Part 1: Components for the UV, visible and near-infrared spectral ranges
- KS B ISO 11151-1-2015(2020) Lasers and laser-related equipment ― Standard optical components ― Part 1: Components for the UV, visible and near-infrared spectral ranges
- KS B ISO 11554:2013 Optics and optical instruments ?; Laser and laser-related equipment ?; Test methods for laser beam power, energy and temporal characteristics
- KS B ISO 11554:2003 Optics and optical instruments-Lasers and laser-related equipment-Test methods for laser beam power, energy and temporal characteristics
- KS B ISO 11554:2015 Optics and optical instruments ― Laser and laser-related equipment ― Test methods for laser beam power, energy and temporal characteristics
- KS B ISO 13694-2015(2020) Optics and optical instruments — Lasers and laser-related equipment — Test methods for laser beam power[energy] density distribution
- KS B ISO 11554-2015(2020) Optics and optical instruments ― Laser and laser-related equipment ― Test methods for laser beam power, energy and temporal characteristics
- KS K 0850-2009 Test method for ultraviolet blocking and sun protection factor of textiles
- KS G ISO 4851:2014 Personal eye-protectors — Ultra-violet filters — Utilisation and transmittance requirements
- KS G ISO 4851:2021 Personal eye-protectors — Ultra-violet filters — Utilisation and transmittance requirements
- KS C 6108-2013 Power and energy measuring detectors Instruments and equipment for laser radiation
- KS C 6108-1997 Power and energy measuring detectors Instruments and equipment for laser radiation
RU-GOST R, UV laser power
- GOST 25786-1983 Lasers. Measuring methods of average power, pulse average power, relative average power instability
- GOST 25819-1983 Lasers. Methods of pulse laser radiation peak power measurement
- GOST R 50005-1992 Lasers and solid-state laser heads. Measurement methods of peak local energy (power) density
- GOST R ISO 13694-2010 Optics and optical instruments. Laser and laser-related equipment. Test methods for laser beam power (energy) density distribution
- GOST R 59741-2021 Optics and photonics. Lasers and laser-related equipment. Test methods for laser radiation power, energy and temporal characteristics
- GOST R 59422.1-2021 Optics and photonics. Lasers and laser-related equipment. Standard optical elements. Part 1. Standard optical elements for laser equipment operating in the ultraviolet, visible and near-infrared spectral ranges. General technical requirements
- GOST 25917-1983 Lasers. Methods for measurement of relative distribution of radiant energy (power)
- GOST 25811-1983 Means measuring laser output average power. Types. Basic parameters. Measuring methods
- GOST 25368-1982 Means for measurement of pulse laser radiation maximum power. Types and main parameters. Measuring methods
- GOST 8.275-2016 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring laser output average power and laser pulse energy within the wavelength range from 0,3 to 12,0 m
- GOST 8.275-1991 State system for ensuring the uniformity of measurements. State verification schedule for means, measuring laser output average power and laser pulse energy within the wavelength range of 0,3 to 12,0 um
- GOST 8.443-1981 State system of ensuring the uniformity of measurements. Standard instruments for monopulse and modulated puls laser radiation peak power measurements. Methods and means for verification
- GOST 8.275-2007 State system for ensuring the uniformity of measurements. State verification schedule for means measuring the laser output average power and laser pulse energy within the wavelength range from 0,3 to 12,0 m
- GOST 8.275-2013 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring laser output average power and laser pulse energy within the wavelength range from 0,3 to 12,0 mkm
- GOST 8.445-1981 State system for ensuring the uniformity of measurements. Standard means mesuring laser output average power. Methods and means for verification
国家市场监督管理总局、中国国家标准化管理委员会, UV laser power
- GB/T 37074-2018 Technical requirements of ultraviolet excitation fluorescent anti-counterfeiting fiber
- GB/T 14571.4-2022 Test method of ethylene glycol for industrial use—Part 4：Determination of ultraviolet transmittance—Ultraviolet spectrophotometric method
- GB/T 37396.1-2019 Lasers and laser-related equipment—Standard optical components—Part 1: Components for the UV,visible and near-infrared spectral ranges
American Society for Testing and Materials (ASTM), UV laser power
- ASTM E2193-16 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (using Ultraviolet Spectrophotometry)
- ASTM E2193-23 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (using Ultraviolet Spectrophotometry)
- ASTM E2193-04 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
- ASTM E2193-02a Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
- ASTM E2193-02 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
- ASTM E2193-08 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
British Standards Institution (BSI), UV laser power
- BS EN ISO 11151-1:2000 Lasers and laser-related equipment. Standard optical components. Components for the UV, visible and near-infrared spectral ranges
- BS EN ISO 11151-1:2015 Lasers and laser-related equipment. Standard optical components. Components for the UV, visible and near-infrared spectral ranges
- BS EN ISO 13694:2015 Optics and photonics. Lasers and laser-related equipment. Test methods for laser beam power (energy) density distribution
- BS EN ISO 11254-3:2006 Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Assurance of laser power (energy) handling capabilities
- BS EN ISO 13694:2001 Optics and optical instruments. Lasers and laser-related equipment. Test methods for laser beam power (energy) density distribution
- BS EN ISO 11554:2017 Optics and photonics. Lasers and laser-related equipment. Test methods for laser beam power, energy and temporal characteristics
- BS EN ISO 11554:2009 Optics and photonics. Lasers and laser-related equipment. Test methods for laser beam power, energy and temporal characteristics
- BS EN ISO 11554:2008 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics
- BS EN ISO 21254-3:2011 Lasers and laser-related equipment. Test methods for laser-induced damage threshold. Assurance of laser power (energy) handling capabilities
- BS EN ISO 13694:2018 Tracked Changes. Optics and photonics. Lasers and laser-related equipment. Test methods for laser beam power (energy) density distribution
- BS EN 4650:2010 Aerospace series - Wire and cable marking process, UV Laser
- BS EN ISO 3656:2011 Animal and vegetable fats and oils. Determination of ultraviolet absorbance expressed as specific UV extinction
- BS EN 4650:2023 Tracked Changes. Aerospace series. Wire and cable marking process, UV Laser
- BS EN 61040:1993 Specification for power and energy measuring detectors, instruments and equipment for laser radiation
- BS EN 170:2002 Personal eye - protection — Ultraviolet filters — Transmittance requirements and recommended use
- 14/30293824 DC BS ISO 9050. Glass in building. Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing factors
- BS EN 170:2003 Personal eye-protection - Ultraviolet filters.Transmittance requirements and recommended use
- BS EN 2266-005:2006 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 200 °C - UV laser printable - Product standard
- BS EN 61290-7-1:2007 Optical amplifiers - Test methods - Out-of-band insertion losses - Filtered optical power meter method
- BS EN 2266-005:2005 Cables, electrical, for general purpose — Operating temperatures between
- BS PD IEC/TR 60825-17:2015 Safety of laser products. Safety aspects for use of passive optical components and optical cables in high power optical fibre communication systems
- PD IEC/TR 60825-17:2015 Tracked Changes. Safety of laser products. Safety aspects for use of passive optical components and optical cables in high power optical fibre communication systems
- BS EN 2267-010:2005 Cables, electrical, for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 010: DR family, single UV laser printable — Product standard
- BS EN 2267-010:2006 Aerospace series. Cables, electrical for general purpose. Operating temperatures between -55°C and 260°C. DR family, single UV laser printable. Product standard
- BS EN 2267-010:2013 Aerospace series. Cables, electrical, for general purpose. Operating temperatures between - 55°C and 260°C. DR family, single UV laser printable. Product standard
- BS EN 2266-007:2005 Cables, electrical, for general purpose — Operating temperatures between –55 ℃ and 200 ℃ — Part 007: UV laser printable multicore jacketed cable — Product standard
- BS EN 62788-1-4:2016+A1:2020 Measurement procedures for materials used in photovoltaic modules - Encapsulants. Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength
- BS EN 2267-012:2015 Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55C and 260C. DZ family, single UV laser printable for use in low pressure atmosphere. Product standard
- BS EN 2267-007:2005 Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 007: DMA family, single ink-jet printable and multicore assembly - Product standard
- BS EN 2346-005:2013 Aerospace series. Cable, electrical, fire resistant. Operating temperatures between -65°C and 260°C. DW family, single UV laser printable and multicore assembly. Light weight. Product standard
- BS EN 2346-005:2017 Aerospace series. Cable, electrical, fire resistant. Operating temperatures between -65 C and 260 C. DW family, single UV laser printable and multicore assembly. Light weight. Product standard
Japanese Industrial Standards Committee (JISC), UV laser power
- JIS C 6180:1991 Measuring methods for laser output power
- JIS C 6181:1995 Power and energy measuring detectors, instruments and equipment for laser radiation
International Organization for Standardization (ISO), UV laser power
- ISO 11151-1:2000 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges
- ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges
- ISO 11554:2006 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics
- ISO 11554:1998 Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics
- ISO 13694:2018 Optics and photonics — Lasers and laser-related equipment — Test methods for laser beam power (energy) density distribution
- ISO/CD 11554 Optics and photonics — Lasers and laser-related equipment — Test methods for laser beam power, energy and temporal characteristics
- ISO 11554:2017 Optics and photonics — Lasers and laser-related equipment — Test methods for laser beam power, energy and temporal characteristics
- ISO 11554:2003 Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics
- ISO 11254-3:2006 Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 3: Assurance of laser power (energy) handling capabilities
- ISO 21254-3:2011 Lasers and laser-related equipment - Test methods for laser-induced damage threshold - Part 3: Assurance of laser power (energy) handling capabilities
- ISO/DIS 11554:2023 Optics and photonics — Lasers and laser-related equipment — Test methods for laser beam radiant power, radiant energy and temporal characteristics
- ISO 9050:2003 Glass in building - Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing factors
- ISO 9050:1990 Glass in building; determination of light transmittance, solar direct transmittance, total solar energy transmittance and ultraviolet transmittance, and related glazing factors
- ISO 4851:1979 Personal eye-protectors; Ultra-violet filters; Utilisation and transmittance requirements
- ISO 4216:2021 Thermosetting resin and UV curable resin — Determination of shrinkage by continuous measurement method
- ISO 3656:2002 Animal and vegetable fats and oils - Determination of ultraviolet absorbance expressed as specific UV extinction
German Institute for Standardization, UV laser power
- DIN EN ISO 11151-1:2000 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the ultraviolet, visible and near-infrared spectral range (ISO 11151-1:2000); German version EN ISO 11151-1:2000
- DIN EN ISO 11151-1:2015-12 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2015); German version EN ISO 11151-1:2015
- DIN EN ISO 13694:2019-06 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution (ISO 13694:2018); German version EN ISO 13694:2018
- DIN EN ISO 11254-3:2006 Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 3: Assurance of laser power (energy) handling capabilities (ISO 11254-3:2006); English version of DIN EN ISO 11254-3:2006-12
- DIN EN 4650:2023-06 Aerospace series - Wire and cable marking process, UV Laser; German and English version EN 4650:2023
- DIN EN ISO 13694:2019 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution (ISO 13694:2018)
- DIN EN ISO 11554:2008 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2006);English version of DIN EN ISO 11554:2008-11
- DIN EN ISO 11554:2017 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2017)
- DIN EN ISO 11554:2017-12 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2017); German version EN ISO 11554:2017
- DIN EN ISO 21254-3:2011-10 Lasers and laser-related equipment - Test methods for laser-induced damage threshold - Part 3: Assurance of laser power (energy) handling capabilities (ISO 21254-3:2011); German version EN ISO 21254-3:2011
- DIN EN ISO 11554:2023-08 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam radiant power, radiant energy and temporal characteristics (ISO/DIS 11554:2023); German and English version prEN ISO 11554:2023 / Note: Date of issue 2023-06-30*Int...
- DIN EN ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2015); German version EN ISO 11151-1:2015
- DIN EN 4650:2020 Aerospace series - Wire and cable marking process, UV Laser; English version prEN 4650:2020
- DIN EN 61040:1993 Power and energy measuring detectors, instruments and equipment for laser radiation (IEC 61040:1990); German version EN 61040:1992
- DIN EN ISO 21254-3:2011 Lasers and laser-related equipment - Test methods for laser-induced damage threshold - Part 3: Assurance of laser power (energy) handling capabilities (ISO 21254-3:2011); German version EN ISO 21254-3:2011
- DIN EN 170:2003-01 Personal eye protection - Ultraviolet filters - Transmittance requirements and recommended use; German version EN 170:2002
- DIN EN 4650:2023 Aerospace series - Wire and cable marking process, UV Laser; German and English version EN 4650:2023
- DIN EN 60825 Bb.17:2012 Safety of laser products - Supplement 17: Safety aspects for use of passive optical components and optical cables in high power optical fibre communication systems (IEC/TR 60825-17:2010)
- DIN EN 61290-7-1:2008-02 Optical amplifiers - Test methods - Part 7-1: Out-of-band insertion losses - Filtered optical power meter method (IEC 61290-7-1:2007); German version EN 61290-7-1:2007 / Note: DIN EN 61290-7-1 (1999-08) remains valid alongside this standard until 2010-...
- DIN EN 61290-7-1:2008 Optical amplifiers - Test methods - Part 7-1: Out-of-band insertion losses - Filtered optical power meter method (IEC 61290-7-1:2007); German version EN 61290-7-1:2007
Group Standards of the People's Republic of China, UV laser power
- T/CI 036-2023 Ceramic dental 3D printing equipment with UV laser scanning
- T/QGCML 2041-2023
- T/JSIES 001-2021 Light radiation protection requirements of high powerlaser cutting equipment
- T/ZSA 39-2020 Characterization of Graphene - Work function - Ultraviolet photoelectron spectroscopy (UPS) method
- T/ZGIA 002-2020 Graphene Test Methods Determination of Work Function Ultraviolet Photoelectron Spectroscopy
- T/GDMDMA 0005-2021 Medical endoscopes—Endoscope supply units—Cold light sources contained near infrared excitation light
Danish Standards Foundation, UV laser power
- DS/EN ISO 11151-1:2000 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges
- DS/EN ISO 13694:2000 Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution
- DS/EN ISO 11554:2008 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics
- DS/EN 4650:2010 Aerospace series - Wire and cable marking process, UV Laser
- DS/EN ISO 21254-3:2011 Lasers and laser-related equipment - Test methods for laser-induced damage threshold - Part 3: Assurance of laser power (energy) handling capabilities
- DS/EN 61040:1994 Power and energy measuring detectors, instruments and equipment for laser radiation
- DS/EN 170:1993 Personal eye-protection. Ultraviolet filters. Transmittance requirements and recommended use
- DS/EN 61290-7-1:2007 Optical amplifiers - Test methods - Part 7-1: Out-of-band insertion losses - Filtered optical power meter method
- DS/EN 62788-1-4:2020 Measurement procedures for materials used in photovoltaic modules – Part 1-4: Encapsulants – Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength
Association Francaise de Normalisation, UV laser power
- NF S10-111-1*NF EN ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1 : components for the UV, visible and near-infrared spectral ranges
- NF EN ISO 11151-1:2015 Lasers et équipements associés aux lasers - Composants optiques standards - Partie 1 : composants pour les plages spectrales UV, visible et proche de l'infrarouge
- NF S10-124*NF EN ISO 13694:2018 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution
- NF EN ISO 13694:2018 Optique et photonique - Lasers et équipements associés aux lasers - Méthodes d'essai de distribution de la densité de puissance (d'énergie) du faisceau laser
- NF S10-121:2006 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics.
- NF S10-121:2008 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics.
- NF S10-121*NF EN ISO 11554:2017 Optics and photonics - Lasers and laser-related equipment- Test methods for laser beam power, energy and temporal characteristics
- NF EN 4650:2023 Série aérospatiale - Procédé de marquage des fils et câbles par laser UV
- NF S10-112-3:2006 Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 3 : assurance of laser power (energy) handling capabilities.
- NF EN ISO 21254-3:2011 Lasers et équipements associés aux lasers - Méthodes d'essai du seuil d'endommagement provoqué par laser - Partie 3 : possibilités de traitement par puissance (énergie) laser
- NF EN ISO 11554:2017 Optique et photonique - Lasers et équipements associés aux lasers - Méthodes d'essai de la puissance et de l'énergie des faisceaux lasers et de leurs caractéristiques temporelles
- NF L52-251*NF EN 4650:2010 Aerospace series - Wire and cable marking process, UV Laser
- NF S10-112-3*NF EN ISO 21254-3:2011 Lasers and laser-related equipment - Test methods for laser-induced damage threshold - Part 3 : assurance of laser power (energy) handling capabilities
- NF S10-111-1:2001 Laser and laser-related equipment - Standard optical components - Part 1 : components for the UV, visible and near-infrared spectral ranges.
- NF C43-803:1993 Power and energy measuring detectors, instruments and equipment for laser radiation.
- NF S77-105*NF EN 170:2003 Personal eye-protection - Ultraviolet filters - Transmittance requirements and recommended use
- NF EN 3475-706:2006 Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais - Partie 706 : marquabilité laser UV
- NF S77-105:1992 Personal eye-protection. Ultraviolets filters. Transmittance requirements and recommended use.
- NF EN 2266-005:2006 Série aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre - 55 oC et 200 oC - Partie 005 : marquables au laser UV - Norme de produit
- NF EN 2267-005:2006 Série aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre - 55 oC et 260 oC - Partie 005 : marquables au laser UV - Norme de produit
- NF EN 61290-7-1:2007 Amplificateurs optiques - Méthodes d'essai - Partie 7-1 : pertes d'insertion hors-bande - Méthode par puissance-mètre optique filtré
- NF L52-265-005*NF EN 2266-005:2006 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 oC and 200 oC - Part 005 : UV laser printable - Product standard
- NF C93-805-7-1*NF EN 61290-7-1:2007 Optical amplifiers - Test Methods Part - 7-1 : out-of-band insertion losses - Filtered optical power meter method
- NF L52-265-007*NF EN 2266-007:2006 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 oC and 200 oC - Part 007 : UV laser printable multicore jacketed cable - Product standard
- NF EN 2266-007:2006 Série aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre - 55 oC et 200 oC - Partie 007 : multiconducteurs gainés marquables au laser UV - Norme de produit
- NF EN 2267-010:2018 Série aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre - 55 oC et 260 oC - Partie 010 : famille DR, fil simple marquable au laser UV - Norme de produit
- NF C57-788-1-4/A1*NF EN 62788-1-4/A1:2020 Measurement procedures for materials used in photovoltaic modules - Part 1-4 : encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength
- NF EN 2267-012:2015 Série aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre - 55 oC et 260 oC - Partie 012 : famille DZ, fil simple marquable au laser UV pour emploi en basse pression - Norme de produit
- XP PR EN 2265-005:1995 Série aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre - 55 degrés Celsius et 150 degrés Celsius - Partie 005 : marquables au laser UV - Norme de produit.
ES-UNE, UV laser power
- UNE-EN ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2015)
- UNE-EN ISO 13694:2018 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution (ISO 13694:2018) (Endorsed by Asociación Española de Normalización in February of 2019.)
- UNE-EN 4650:2023 Aerospace series - Wire and cable marking process, UV Laser (Endorsed by Asociación Española de Normalización in April of 2023.)
- UNE-EN ISO 11554:2017 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2017) (Endorsed by Asociación Española de Normalización in October of 2017.)
- UNE-EN ISO 21254-3:2011 Lasers and laser-related equipment - Test methods for laser-induced damage threshold - Part 3: Assurance of laser power (energy) handling capabilities (ISO 21254-3:2011) (Endorsed by AENOR in December of 2011.)
- UNE-EN 61290-7-1:2007 Optical amplifiers - Test methods -- Part 7-1: Out-of-band insertion losses - Filtered optical power meter method (IEC 61290-7-1:2007). (Endorsed by AENOR in October of 2007.)
- UNE-EN 62788-1-4:2017 Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength
- UNE-EN 62788-1-4:2017/A1:2021 Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength
European Committee for Standardization (CEN), UV laser power
- EN ISO 11151-1:2000 Lasers and Laser-Related Equipment - Standard Optical Components - Part 1: Components for the UV, Visible and Near-Infrared Spectral Ranges ISO 11151-1: 2000
- EN ISO 11554:1998 Optics and Optical Instruments - Lasers and Laser-Related Equipment - Test Methods for Laser Beam Power, Energy and Temporal Characteristics ISO 11554:1998
- EN ISO 11554:2003 Optics and optical instruments Lasers and laser-related equipment Test methods for laser beam power, energy and temporal characteristics
- EN ISO 11554:2017 Optics and photonics -Lasers and laser-related equipment - Test methods for laser beam power@ energy and temporal characteristics
- prEN ISO 11554 rev Optics and photonics — Lasers and laser-related equipment — Test methods for laser beam power, energy and temporal characteristics
- EN ISO 11554:2008 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2006)
- EN 4650:2010 Aerospace series - Wire and cable marking process, UV laser
- EN ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2015)
- EN ISO 13694:2015 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution
- EN ISO 21254-3:2011 Lasers and laser-related equipment - Test methods for laser-induced damage threshold - Part 3: Assurance of laser power (energy) handling capabilities (ISO 21254-3:2011)
- EN 170:2002 Personal eye-protection - Ultraviolet filters - Transmittance requirements and recommended use
- prEN 410-1990 Glass in building; determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing characteristics
- ISO/DIS 3656:2000 Animal and Vegetable Fats and Oils - Determination of Ultraviolet Absorbance Expressed as Specific UV Extinction
- EN 2266-005:2005 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 200 °C - Part 005: UV laser printable - Product standard
- EN 2267-010:2005 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 degrees C and 260 degrees C - Part 010: DR family, single UV laser printable ?Product standard
- EN 2266-007:2005 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 200 °C - Part 007: UV laser printable multicore jacketed cable - Product standard
- EN 2267-010:2013 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 掳C and 260 掳C - Part 010: DR family, single UV laser printable - Product standard
- EN 2267-010:2017 Aerospace series - Cables@ electrical@ for general purpose - Operating temperatures between -55 ��and 260 ��- Part 010: DR family@ single UV laser printable - Product standard
- EN 4611-005:2012 Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 005: Silver plated copper - Operating temperatures, between -65 °C and 150 °C - Single extruded wall for enclosed applications - UV laser prin
- EN 2267-012:2015 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 012: DZ family, single UV laser printable for use in low pressure atmosphere - Product standard
Professional Standard - Machinery, UV laser power
- JB/T 11667-2013 Fast axial flow high power CO<下标2> laser
- JB/T 10785-2007 The high power transverse flow continuous wave C0 lasers
- JB/T 6860-1993 Power and energy measuring detectors, instruments and equipment for laser radiation
Guangdong Provincial Standard of the People's Republic of China, UV laser power
- DB44/T 1612-2015 General technical specification for high power fiber laser cutting machine
Institute of Electrical and Electronics Engineers (IEEE), UV laser power
- IEEE 2066-2021 IEEE Guide for Safety Specification of Laser Transmission in High-Power Industrial Laser Systems
- IEEE Std 2066-2021 IEEE Guide for Safety Specification of Laser Transmission in High-Power Industrial Laser Systems
- IEEE P2066/D6, July 2021 IEEE Approved Draft Guide for Safety Specification of Laser Transmission in High-Power Industrial Laser System
Professional Standard - Medicine, UV laser power
- YY/T 0756-2009 Optics and Optical Instruments Lasers and Laser-related Equipment Laser Beam Power (Test Method for Energy Density Distribution
CEN - European Committee for Standardization, UV laser power
- EN ISO 11554:2006 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power@ energy and temporal characteristics
- EN ISO 13694:2018 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution
- EN ISO 11254-3:2006 Lasers and laser-related equipment - Determination of laserinduced damage threshold of optical surfaces - Part 3: Assurance of laser power (energy) handling capabilities
- EN 4611-005:2018 Aerospace series - Cables@ electrical@ for general purpose@ single and multicore assembly - XLETFE Family - Part 005: Silver plated copper - Operating temperatures between - 65 °C and 150 °C - Single extruded wall for enclosed applications - UV laser prin
Lithuanian Standards Office , UV laser power
- LST EN 4650-2010 Aerospace series - Wire and cable marking process, UV Laser
- LST EN ISO 11151-1:2002 Laser and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2000)
- LST EN ISO 13694:2000 Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution (ISO 13694:2000)
- LST EN ISO 11554:2008 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2006)
- LST EN ISO 13694:2000/AC:2008 Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution (ISO 13694:2000/Cor 1:2005)
- LST EN ISO 21254-3:2011 Lasers and laser-related equipment - Test methods for laser-induced damage threshold - Part 3: Assurance of laser power (energy) handling capabilities (ISO 21254-3:2011)
- LST EN 61040-2001 Power and energy measuring detectors, instruments and equipment for laser radiation (IEC 61040:1990)
- LST EN 2267-010-2014 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 010: DR family, single UV laser printable - Product standard
- LST EN 61290-7-1-2007 Optical amplifiers - Test methods - Part 7-1: Out-of-band insertion losses - Filtered optical power meter method (IEC 61290-7-1:2007)
Professional Standard - Electron, UV laser power
- SJ 1875-1981 Methods of measurement for output power of gas laser devices
- SJ 3250-1989 Methods of measurement for chromium concentration in semi-insulation Gallium arsenide by infra-red absorption
- SJ 1876-1981 Methods of measurement for stability of output power for gas laser devices
- SJ 20957-2006 General specification for large power semiconductor laser diode array
- SJ 2658.6-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for output optical power
- SJ 2658.13-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for output optical power temperature coefficient
未注明发布机构, UV laser power
- BS EN ISO 11554:2017(2020) Optics and photonics — Lasers and laser - related equipment — Test methods for laser beam power, energy and temporal characteristics
- DIN EN 170:1992 Ultraviolet protection filter = transmission requirements and recommended use
- DIN EN 61290-7-1:1999 Fiber Optic Amplifiers – Basic Specification Part 7-1: Test Methods for Out-of-Band Insertion Loss Optical Power Meters and Filters
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, UV laser power
- GB/T 16601.3-2017 Lasers and laser-related equipment—Test methods for laser-induced damage threshold—Part 3: Assurance of laser power(energy)handling capabilities
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, UV laser power
- PREN 4650-2008 Aerospace series Wire and cable marking process@ UV Laser (Edition P 1)
National Metrological Technical Specifications of the People's Republic of China, UV laser power
- JJF 1326-1990 30~300 watts laser power benchmark operation technical specification
- JJF 1327-1990 0.1~30 watt laser power benchmark operation technical specification
- JJF 1328-1990 1-30 watt laser power sub-benchmark operation technical specification
- JJF 1329-1990 0.1~100 mW laser power benchmark operation technical specification
- JJF 1330-1990 0.1~100 mW laser power sub-benchmark operation technical specification
Standard Association of Australia （SAA）, UV laser power
- AS/NZS ISO 13694:2004 Optics and optical instruments - Lasers and laser-related equipment -Test methods for laser beam power (energy) density distribution
- AS/NZS 4257.7:1994 Plastic roof and wall cladding materials - Methods of test - Determination of colourfastness, light transmission and impact resistance following ultraviolet light exposure
GOSTR, UV laser power
- GOST R 58371-2019 Optics and photonics. Lasers and laser-related equipment. Methods for determination of laser-induced damage threshold. Part 3. Assurance of laser power (energy) handling capabilities
- GOST R 58244-2018 Safety of laser products. Part 17. Safety aspects for use of passive optical components and optical cables in high power optical fibre communication systems
BE-NBN, UV laser power
- NBN-EN 61040-1993 Power and energy measuring detectors, instruments and equipment for laser radiation
- NBN-EN 170-1993 Personal eye-protection. Ultraviolet filters. Transmittance requirements and recommended use
Fujian Provincial Standard of the People's Republic of China, UV laser power
- DB35/T 1119-2011 Small and medium power green and blue solid-state laser crystal components
Aerospace, Security and Defence Industries Association of Europe (ASD), UV laser power
European Committee for Electrotechnical Standardization（CENELEC）, UV laser power
- EN 61040:1992 Power and Energy Measuring Detectors, Instruments and Equipment for Laser Radiation
- EN 61290-7-1:2007 Optical amplifiers - Test methods - Part 7-1: Out-of-band insertion losses - Filtered optical power meter method
International Electrotechnical Commission (IEC), UV laser power
- IEC 61040:1990 Power and energy measuring detectors, instruments and equipment for laser radiation
- IEC TR 60825-17:2015 Safety of laser products - Part 17: Safety aspects for use of passive optical components and optical cables in high power optical fibre communication systems
- IEC TR 60825-17:2010 Safety of laser products.Part 17: Safety aspects for use of passive optical components and optical cables in high power optical fibre communication systems
- IEC 61290-7-1:2007 Optical amplifiers - Test methods - Part 7-1: Out-of-band insertion losses - Filtered optical power meter method
- IEC 62788-1-4:2016/AMD1:2020 Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness
- IEC 62788-1-4:2016 Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness
- IEC 62788-1-4:2016+AMD1:2020 CSV Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness
- IEC 61290-7-1:1998 Optical fibre amplifiers - Basic specification - Part 7-1: Test methods for out-of-band insertion losses - Filtered optical power meter
VN-TCVN, UV laser power
- TCVN 7737-2007 Glass in building.Method for determination of light transmittance, light reflectance, total solar energy transmittance and ultraviolet transmittance
Professional Standard - Chemical Industry, UV laser power
- HG/T 5077-2016 Optical functional films.Measuring method of the near infrared spectral transmittance
工业和信息化部, UV laser power
- HG/T 5674-2020 Method for determination of ultraviolet absorber content in triacetyl cellulose (TAC) films with optical functional films
CENELEC - European Committee for Electrotechnical Standardization, UV laser power
- EN 61290-7-1:1998 Optical Fibre Amplifiers - basic Specification Part 7-1: Test Methods for Out-of-Band Insertion Losses Filtered Optical Power Meter
American National Standards Institute （ANSI), UV laser power
- ANSI/TIA-455-213-2000 FOTP213 - IEC 61290-7-1 - Optical Fibre Amplifiers -Basic Specification - Part 7-1: Test Methods for Out-of-Band Insertion Losses - Filtered Optical Power Meter
European Association of Aerospace Industries, UV laser power
- AECMA PREN 2712-007-1991 Aerospace Series Single and Multicore Electrical Cables Screened (Spiral) and Jacketed for General Use Operating Temperatures Between -55 and +150 Degrees Celsius UV Laser Printable Product Standard