ZH
RU
ES

Acrylic acid monomer content in acrylic resin

Acrylic acid monomer content in acrylic resin, Total:74 items.

In the international standard classification, Acrylic acid monomer content in acrylic resin involves: Plastics, Paints and varnishes, Organic chemicals, Analytical chemistry, Inks. Printing inks, Aids for disabled or handicapped persons, Food products in general, Raw materials for rubber and plastics, Installations in buildings, Products of the textile industry, Wood, sawlogs and sawn timber, Processes of the textile industry, Rubber, Medical equipment, Photography, Reinforced plastics, Products of the chemical industry, Textile fibres.

Professional Standard - Commodity Inspection, Acrylic acid monomer content in acrylic resin

SN/T 3342-2012 Determination of residual monomers in acrylic resin.Gas chromatography-mass spectrometry

(U.S.) Ford Automotive Standards, Acrylic acid monomer content in acrylic resin

FORD ESB-M9H41-A-1978 SHEETING, COTTON - VINYL/ POLYAMIDE/ACRYLIC COATED
FORD ESB-M36J1-A1-1996 ENAMEL, THERMOSETTING, ACRYLIC BASECOAT, HIGH SOLIDS, WET ON WET PROCESS EXTERIOR
FORD SK-M6J9556-A-1994 PRIMER SURFACER, FOR ACRYLIC AND ALKYD ENAMELS, SPRAY APPLICATION AFTER ELECTROCOATING [Replaced: FORD S-M99J4521-A]
FORD WSS-M99C113-B-2009 LUBRICANT, TETRAFLUOROETHYLENE - ACRYLIC RESIN BINDER - WATER BORNE - SPRAY ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESF-M4D9-A10-2005 ACRYLIC (PMMA), MEDIUM HEAT DEFLECTION TEMPERATURE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WRS-M4D585-C2-2015 POLYCARBONATE/ ACRYLONITRILE BUTADIENE STYRENE BLEND (PC+ABS) MOLDING COMPOUND, RECYCLED 100% PCR/PIR CONTENT POLYCARBONATE RESIN ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M4D585-C1)
FORD ESB-M50J107-A-1980 ENAMEL, ACRYLIC BAKING- INTERMEDIATE SOLIDS - NON-AQUEOUS DISPERSION (NAD), EXTERIOR BODY QUALITY
FORD ESB-M32J106-A-1996 ENAMEL, ACRYLIC BAKING, POLISH RESISTANT, INTERMEDIATE HIGH SOLIDS, EXTERIOR LOW AND MEDIUM GLOSS
FORD ESB-M32J126-A-1991 ENAMEL, ACRYLIC BAKING, POLISH RESISTANT, HIGH SOLIDS, EXTERIOR, LOW AND MEDIUM GLOSS
FORD ESB-M3G133-A-2005 ADHESIVE, FILM, PRESSURE SENSITIVE - ACRYLIC WITH BIOCIDE *** TO BE USED WITH WSS-M99P1111-A ***
FORD WSP-M2D432-A-2004 ETHYLENE/ACRYLIC (AEM) ELASTOMER AUTOMATIC TRANSMISSION CLUTCH PISTON SEAL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M3G221-A-2006 TAPE, ADHESIVE, PRESSURE SENSITIVE, TWO SIDED, ACRYLIC, MEDIUM TACK, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M50J107-A-2012 ENAMEL, ACRYLIC BAKING, NON-AQUEOUS DISPERSION (NAD), INTERMEDIATE SOLIDS, EXTERIOR BODY QUALITY ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M32J121-A2-1986 ENAMEL, INTERMEDIATE V.O.C., THERMOSET ACRYLIC CLEARCOAT FOR BASECOAT/CLEARCOAT WET ON WET PROCESS, EXTERIOR QUALITY Shown on ESB-M32J121-A1
FORD ESB-M32J106-A-2012 ENAMEL - ACRYLIC BAKING - POLISH RESISTANT, INTERMEDIATE HIGH SOLIDS - EXTERIOR LOW AND MEDIUM GLOSS ***TO BE USED WITH FORD WSS-M99P1111-A***

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Acrylic acid monomer content in acrylic resin

GB/T 8661-1988 Determination of residual acrylonitrile monomer content in acrylonitrile-butadiene-styrene resin by gas chromatography
GB/T 9353-1988 Determination of residual styrene monomer in Acrylonitrile-Butadiene-Styrene(ABS)resin by gas chromatography
GB/T 17338-1998 Determination of residual acrylonitrile monomer in styrene-acrylonitrile copolymers and rubber-modified acrylonitrile-butadiene-styrene resins and their products used for food packaging
GB/T 5009.152-2003 Determination of residual acrylonitrile monomer in styrene--acrylonitrile copolymers and rubber--modified acrylonitrile--butadiene--styrene resins and their products used for food packaging
GB/T 16867-1997 Determination of residual styrene monomer in polystyrene and acrylonitrile-butadiene-styrene resins by gas chromatography
GB/T 4615-1984 Determination method of residual vinyl chloride monomer contents in polyvinyl chloride
GB/T 19861-2005 Determination for strong-base group,weak-base group and weak-acid group exchange capacity of acrylic type anion exchange resins
GB/T 32699-2016 Test method for purity of multifunctional acrylates used for UV materials.Capillary gas chromatography
GB/T 15928-2008 Reinforced plastics based on unsaturated polyester resins.Determination of residual styrene monomer content
GB/T 29493.8-2013 Determination of harmful substances in textile dyeing and finishing auxiliaries.Part 8:Determination of residual monomers in polyacrylate
GB/T 14520-1993 Determination of residual styrene monomer content in reinforced plastics based on unsaturated polyester resins by gas chromatography

American Society for Testing and Materials (ASTM), Acrylic acid monomer content in acrylic resin

ASTM D3594-93(2006) Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers
ASTM D3125-97 Standard Test Method for Monomethyl Ether of Hydroquinone in Colorless Monomeric Acrylate Esters and Acrylic Acid
ASTM D7733-12 Standard Specification for Acrylic Dispersion Ground
ASTM D3125-06(2012) Standard Test Method for Monomethyl Ether of Hydroquinone in Colorless Monomeric Acrylate Esters and Acrylic Acid
ASTM D3125-06 Standard Test Method for Monomethyl Ether of Hydroquinone in Colorless Monomeric Acrylate Esters and Acrylic Acid
ASTM D3125-97(2001) Standard Test Method for Monomethyl Ether of Hydroquinone in Colorless Monomeric Acrylate Esters and Acrylic Acid
ASTM D5508-94a(2001)e1 Standard Test Method for Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (HS-CGC)
ASTM D5508-94a Standard Test Method for Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (HS-CGC)
ASTM D5508-94a(2009)e1 Standard Test Method for Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (HS-CGC)
ASTM D5508-16 Standard Test Method for Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (HS-CGC)
ASTM D5508-23 Standard Test Method for Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (HS-CGC)
ASTM D7767-11 Standard Test Method to Measure Volatiles from Radiation Curable Acrylate Monomers, Oligomers, and Blends and Thin Coatings Made from Them

Taiwan Provincial Standard of the People's Republic of China, Acrylic acid monomer content in acrylic resin

CNS 9897-1983 Method of Test for Vinyl Acetate Content in EVA Resin
CNS 9898-1983 Method of Test for Vinyl Acetate Content in EVA Resin (Saponification Method)
CNS 6671-1980 Method of Test for Methyl Ether of Hydroquinone in Colorless Monomeric Acrylate Esters

Group Standards of the People's Republic of China, Acrylic acid monomer content in acrylic resin

T/SHXCL 000002-2019 Waterborne nanoscale narrow-band polymerized acrylic resin
T/ZGM 022-2022 Assessment requirements for quality grading and forerunner 213 strong base acrylic anion exchange resins

Professional Standard - Light Industry, Acrylic acid monomer content in acrylic resin

QB/T 4539-2013 Alcohol and alcohol-water soluble resin for printing ink.Acrylic type (including modified by copolymerization)

British Standards Institution (BSI), Acrylic acid monomer content in acrylic resin

BS ISO 17190-2:2021 Urine-absorbing aids for incontinence. Polyacrylate superabsorbent powders. Test method for determination of the amount of residual acrylate monomers
BS ISO 4907-1:2023 Plastics. Ion exchange resin - Determination of exchange capacity of acrylic anion exchange resins
BS EN 15334:2007 Sanitary appliances - Methacrylic dispersions of high filler content
BS 2782-4 Method 453C:1996 Methods of testing plastics. Chemical properties. Determination of residual acrylonitrile monomer content in styrene/acrylonitrile copolymers using gas chromatography
22/30423462 DC BS ISO 4907-1. Plastics. Ion exchange resin. Part 1. Determination of exchange capacity of acrylic anion exchange resins
19/30394360 DC BS ISO 17190-2. Urine-absorbing aids for incontinence. Polyacrylate superabsorbent powders. Part 2. Test method for determination of the amount of residual acrylate monomers

Professional Standard - Petrochemical Industry, Acrylic acid monomer content in acrylic resin

SH/T 1837-2023 Plastics — Determination of chloride content in Polypropylene resin powder — Potentiometric titration

Danish Standards Foundation, Acrylic acid monomer content in acrylic resin

DS/EN 15334:2007 Sanitary appliances - Methacrylic dispersions of high filler content
DS/ISO 17190-2:2021 Urine-absorbing aids for incontinence – Polyacrylate superabsorbent powders – Part 2: Test method for determination of the amount of residual acrylate monomers

Lithuanian Standards Office , Acrylic acid monomer content in acrylic resin

LST EN 15334-2007 Sanitary appliances - Methacrylic dispersions of high filler content

AENOR, Acrylic acid monomer content in acrylic resin

UNE-EN 15334:2007 Sanitary appliances - Methacrylic dispersions of high filler content

German Institute for Standardization, Acrylic acid monomer content in acrylic resin

DIN EN 15334:2007-05 Sanitary appliances - Methacrylic dispersions of high filler content; German version EN 15334:2007

Military Standards (MIL-STD), Acrylic acid monomer content in acrylic resin

DOD A-A-53210 A-1989 RESIN, ACRYLIC, DENTAL, INLAY PATTERN AND RESIN, ACRYLIC, LIQUID, DENTAL [Use In Lieu Of: DOD A-A-0053210]

International Organization for Standardization (ISO), Acrylic acid monomer content in acrylic resin

ISO 4907-1:2023 Plastics — Ion exchange resin — Part 1: Determination of exchange capacity of acrylic anion exchange resins
ISO 1833-21:2019 Textiles — Quantitative chemical analysis — Part 21: Mixtures of chlorofibres, certain modacrylics, certain elastanes, acetates, triacetates with certain other fibres (method using cyclohexanone)

Professional Standard - Textile, Acrylic acid monomer content in acrylic resin

FZ/T 10017-2011 Testing method for polyacrylic sizes used in textile warp sizing.Determination of residual monomer content

Indonesia Standards, Acrylic acid monomer content in acrylic resin

SNI 01-7147-2005 Test methods of formaldehyde emissions for laminated timber and veneer by acrylic desiccator methods

Korean Agency for Technology and Standards (KATS), Acrylic acid monomer content in acrylic resin

KS P ISO 17190-2:2021 Urine-absorbing aids for incontinence - Polyacrylate superabsorbent powders - Part 2:Test method for determination of the amount of residual acrylate monomers
KS K 0730-2009 Test method for residual vinyl chloride monomer content of poly(vinyl chloride) fiber and resins
KS K 0730-2022 Test method for residual vinyl chloride monomer content of poly(vinyl chloride) fiber and resins

KR-KS, Acrylic acid monomer content in acrylic resin

KS P ISO 17190-2-2021 Urine-absorbing aids for incontinence - Polyacrylate superabsorbent powders - Part 2:Test method for determination of the amount of residual acrylate monomers

工业和信息化部, Acrylic acid monomer content in acrylic resin

SH/T 1829-2020 Determination of trace element content in plastic polyethylene and polypropylene resins by inductively coupled plasma optical emission spectrometry

Professional Standard - Agriculture, Acrylic acid monomer content in acrylic resin

SN/T 5581-2023 Determination of monomer content in recycled acrylonitrile-butadiene-styrene copolymers by elemental analysis

Association Francaise de Normalisation, Acrylic acid monomer content in acrylic resin

NF EN ISO 1833-12:2020 Textiles - Analyse chimique quantitative - Partie 12 : mélanges d'acrylique, certains modacryliques, certaines chlorofibres, certains élasthannes avec certaines autres fibres (méthode au diméthylformamide)

国家药监局, Acrylic acid monomer content in acrylic resin

YY/T 1776-2021 Determination of lactide monomer content in polylactic acid materials for surgical implants

YU-JUS, Acrylic acid monomer content in acrylic resin

JUS G.S1.505-1992 Plastics. Homopolymer and copolymer resins of vinyl chloride. Determination of residual vinyl chloride monomer (VC) in polymer material and articls by gas chromatographic method

Professional Standard - Chemical Industry, Acrylic acid monomer content in acrylic resin

HG/T 5375～5377-2018 Determination of acrylamide content in water-based adhesives, two-component polyurethane adhesives and ethylene-vinyl acetate (EVA) films for composite flexible packaging (2018)

IT-UNI, Acrylic acid monomer content in acrylic resin

UNI 7039-1972

European Committee for Electrotechnical Standardization（CENELEC）, Acrylic acid monomer content in acrylic resin

EN 60454-3-6:1998 Pressure-Sensitive Adhesive Tapes for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 6: Polycarbonate Film Tapes with Acrylic Thermoplastic Adhesive