ZH
RU
ES
Lao calibration
Lao calibration, Total:500 items.
In the international standard classification, Lao calibration involves: Acoustics and acoustic measurements, Equipment for petroleum and natural gas industries, Rubber, Metrology and measurement in general, Electricity. Magnetism. Electrical and magnetic measurements, Non-destructive testing, Horology, Measurement of fluid flow, Quality, Mechanical testing, Measurement of volume, mass, density, viscosity, Vocabularies, Vacuum technology, Measurement of force, weight and pressure, Testing of metals, Hand-held tools, Analytical chemistry, Plant and equipment for the food industry, Linear and angular measurements, Welding, brazing and soldering, Valves, Geology. Meteorology. Hydrology, Radiation measurements, Optics and optical measurements, Iron and steel products, Thermodynamics and temperature measurements, Company organization and management, Semiconductor devices, Electrical engineering in general, Vibrations, shock and vibration measurements, Capacitors, Optoelectronics. Laser equipment, Air quality, Test conditions and procedures in general, Alarm and warning systems, Medical sciences and health care facilities in general, Lifting equipment, Particle size analysis. Sieving, Shipbuilding and marine structures in general, Education, Milk and milk products, Construction materials, Medical equipment, Graphic technology.
National Metrological Verification Regulations of the People's Republic of China, Lao calibration
- JJG 176-1995 Verification Regulation of Sound Calibrator
- JJG(轻工) 104-1994 Calibration Leak Verification Regulations
- JJG 278-2002 Verification Regulation of Oscilloscope Calibrators
- JJG(电子) 12028-1989 4143 Reciprocity Calibrator Verification Regulations
- JJG(电子) 12038-1991 Verification rules for MWS672 shaking calibrator
- JJG 533-2007 Calibrator of Standard Analogue Strain Quantity
- JJG 1062-2010 Verification Regulation of Portable Vibration Calibrator
- JJG(航天) 2-1982 5200A/5215A (5205A) AC Calibrator Verification Regulations
- JJG(电子) 04024-1989 Specification for verification of BJ4801 model graphic instrument calibrators
- JJG 967-2001 Verification Regulation of Calibrators for Headlamp Tester of Motor Vehicle
- JJG 967-2015 Motor vehicle headlamp tester calibrator verification regulations
- JJG 410-1994 Verification Regulation of Precise AC Voltage Calibration Source
- JJG 424-1986 Verification Regulation of Attenuation Calibration Set Type T07(T07A)
- JJG(电子) 07004-1988 DO29 Calibration Receiver Trial Verification Regulations
- JJG 533-1988 Verification Regulation for Standard Calibrator of Strain Analogue Quantity
- JJG(航天) 23-1987 ME642A level and attenuation calibration device verification regulations
- JJG 488-2008 Verification Regulation of Watch Tester
- JJG 488-1998 Verification Regulation of Watch Tester
- JJG 318-1983 Verification Regulation of HF Voltage Calibration Apparatus Types DO-2 and the Like
- JJG 624-1989 Verification Regulation of Dynamic Calibration of Pressure Transducer
- JJG 252-1981 Verification Regulation of Calibration Receiver Type RS-2 and RS-3
- JJG 838-1993 Verification Regulation of Calibrator for Transister Specificity Oscilloscope
- JJG(电子) 03011-1995 Verification Regulations for Calibration Pulse Generator of S09 Type Stone Wave Device
- JJG(电子) 02005-1988 OF2010 RF Voltage Calibration Device Trial Verification Regulations
- JJG(机械) 86-1992 Sliding bearings thin-walled bearings inter-calibration model verification rules
- JJG(电子) 02004-1988 Trial Verification Regulations for Verification of DO2 Type High Frequency Voltage Calibration Device Using DO40 Type High Frequency Standard Voltmeter
- JJG(机械) 77-1992 DSJ type timing checker verification regulations
- JJG 791-1992 Verification Regulation of Calibration Set of Shock
- JJG 417-1986 Verification Regulation of Calibration for Ge-γ-Ray Spectrometer by <上标152>Eu Point γ-Ray Standard Source
- JJG 169-1993 Verification Regulation of Instrument Transformer Test Set
- JJG 169-2010 Verification Regulation of Transformers Test Set
- JJG 1001-2005 Calibrators for Near Headlamp Tester of Motor Vehicle
- JJG(航天) 28-1987 Verification Regulations for JHF TV Timing and Frequency Calibration Instrument
- JJG(电子) 01006-1991 Calibration Regulations for PO20 Frequency Calibration Timing Receiver
- JJG 362-1984 Verification Regulation for Model DO 16 UHF Microvolt Voltage Calibrating Equipment
- JJG(轻工) 79-1991 Calibration rules for watch instrument calibrator
- JJG(轻工) 81-1991 Calibration rules for mechanical clock calibrator
- JJG(轻工) 82-1991 Calibration Regulations for Quartz Watch Calibrator
- JJG(石油) 39-1995 The Rules for Drafting Petroleum Special Measuring Instruments Calibration Methods
- JJG(铁道) 152-1995 Verification Regulation of Speedmeter Calibration Equipment for Locomotives
- JJG 779-1992 Verification Regulation of Chcker of Speed and Milege Meter for Cars
- JJG(交通) 015-1999 Verification Regulation of Headlamp for Vehicle Tester's Aligner
- JJG(交通) 018-1999 Verification Regulation of Roller Type Speedometer Tester's Aligner
- JJG(航空) 047-1989 MGX-B Clamp Meter Calibrator Verification Regulations
- JJG(航天) 25-1987 Verification Regulations for XD-40 Electric Stopwatch Calibrator
- JJG 434-1986 Verification Regulation of TV Colour Subcarrier Frequency Comparator
- JJG(民航) 043-1997 Verification Regulation of KПA-TПP1T Oil Gauge Tester
- JJG 854-1993 Verification Regulation of Shock Calibration System of Low Acceleration and Long Duration by Using Laser-Doppler Effect
- JJG(机械) 20-1990 Verification Regulations for Calibration Device of WJM-1 Surface Thermometer
CN-STDBOOK, Lao calibration
- 图书 A-4545 Pressure gauge verification and calibration
Professional Standard - Petroleum, Lao calibration
CZ-CSN, Lao calibration
- CSN IEC 565:1993 Calibration of hydrophones
- CSN ISO 7700-1:1993 Check of the calibratíon of moisture meters - Part 1: Moisture meters for cereals
- CSN ISO 2400:1994 Welds in steel. Reference block for the calibration of equipment for ultrasonic examination
- CSN 38 5553-1988 Checking of calibration gas mixture proportion by a comparative method
National Metrological Technical Specifications of the People's Republic of China, Lao calibration
- JJF 1996-2022 Calibration Specification for Pupil Distance Meter Verification Devices
- JJF(电子) 05-1982 Verification Method of DO-29 Calibration Receiver
- JJF(机械) 035-2008 Specification for calibration of tube furnaces for thermocouple verification
- JJF(纺织) 034-2012 Calibration Specification for the Metrological Verification Standard of Textile Yarn Evenness Tester.Capacitance Method
- JJF(纺织)034-2012 Calibration Specification for the Metrological Verification Standard of Textile Yarn Evenness Tester—Capacitance Method
- JJF(纺织) 034-2006 Calibration specification for measurement verification standard of capacitive dryness meter
- JJF(电子) 03-1982 Verification method of DO-2 high frequency voltage calibration device
- JJF 1125-2004 Calibration Specification for Gear Hob Tester
- JJF 1109-2003 Calibration Specification for Concentricity Tester
- JJF 1964-2022 Calibration Specification for Halogen Leak Detectors
- JJF(纺织) 080-2018 Calibration Specification for Textile Needle Detector
- JJF 1290-2011 Calibration Specification for Particulate Analyzer
- JJF(纺织)080-2018 Calibration Specification for Textile Needle Detector
- JJF(机械) 021-2008 Calibration specification for armature tester
- JJF 1900-2021 Calibration Specification for Verification Instruments of Parking Timers
- JJF 1489-2014 Calibration Specification for Calibration Devices of Four-wheel Aligner
- JJF 1505-2015 Calibration Specification for Acoustic Emission Instrumentation
- JJF 1824-2020 Calibration Specification for Automatic Lamp-Inspecting Machines
- JJF 1828-2020 Calibration Specification for Adenosine Triphosphate (ATP)Fluorescence Detectors
- JJF 1140-2006 Calibration Specification for Square Testers
- JJF 1941-2021 Calibration Specification for Material Measures of Length Measuring Instrument with Optical Principle
- JJF 1287-2011 Calibration Specification for Clarity Test Equipment
- JJF 1583-2016 Calibration Specification for Master Meter Method Verification Facility of Compressed Natural Gas Dispenser
- JJF 1822-2020 Calibration Specification for Urea Analyzers of Water Sample Detection
- JJF(机械) 062-2009 Calibration specification of DJS timing calibrator
- JJF 1478-2014 Calibration Specification for High Strength Bolt Testers
- JJF 1138-2005 Calibration Specification for the Testers of Sharpened Milling Cutter
- JJF 1171-2007 Calibration Specification for Temperature Itinerant Detecting Instrument
- JJF 1360-2012 Calibration Specification for Coast-down Time Testers
- JJF 1429-2013 Calibration Specification for Infrared Mammary Gland Examining Equipments
- JJF 1433-2013 Calibration Specification for Chlorine Alarm Detectors
- JJF 1948-2021 Calibration Specification for Gasoline Vapor Recovery Detectors
- JJF 1729-2018 Calibration Specification for Pesticide Residue Detectors
- JJF(建材)143-2018 Calibration Specification for Pile Foundation Settle Testers
- JJF(建材) 143-2018 Calibration specification for pile foundation settlement detector
- JJF(机械) 1069-2021 Calibration specification for steel ball diameter checker
- JJF(机械)1069-2021
- JJF 1674-2017 Calibration Specification for Alarmer Detectors of Benzene
- JJF 1969-2022 Calibration Specification for Impact Elastic Wave Measurement Apparatus
- JJF 1141-2006 Calibration Specification for Turning Angle Testers for Automobile
- JJF 1148-2006 Calibration Specification for Test Devices of Contact Lenses
- JJF 1275-2011 Calibration Specification for X-ray Security Inspection Equipment
- JJF(机械) 1016-2018 Calibration specification of ladder test block for radiographic inspection
- JJF(机械) 1022-2018 Penetration testing reference block calibration specification
- JJF 1986-2022 Calibration specification for differential pressure airtight leak detector
- JJF(机械)1022-2018 Penetration testing reference block calibration specification
- JJF(机械)1016-2018 Calibration specification of ladder test block for radiographic inspection
- JJF 1749-2019 Calibration Specification for Vehicle Contour Dimensions Testers
- JJF 1912-2021 Calibration Specification for Testing Instruments of Sunglasses Power
- JJF 1192-2008 Calibration Specification for Automotive Suspension Tester
- JJF 1541-2015 Calibration Specification for Hemodialysis Equipment Tester
- JJF 1263-2010 Calibration Specification for the Alarmer Detector of Sulfur Hexafluoride
- JJF(机械) 014-2008 Calibration specification for electric iron automatic detection device
- JJF(建材) 162-2019 Calibration specification for glass surface stress detector
- JJF(机械) 1056-2021 Calibration specification for residual stress ultrasonic detector
- JJF(机械) 1059-2021 Calibration specification for manipulator ultrasonic testing system
- JJF(机械)1056-2021 Calibration specification for residual stress ultrasonic detector
- JJF(机械)1059-2021
- JJF(汽车) 03-2008 Calibration specification for level wheel aligner
- JJF 1110-2003 Calibration Specification for Construction Quality Tester Sets
- JJF 1220-2009 Calibration Specification for PIND(Particle Impact Noise Detection)
- JJF 1372-2012 Calibration Specification for Instrument of Testing Mortar-strength by Penetration Resistance Method
- JJF 1888-2020 Calibration Specification for Hydrogen Chloride Gas Detectors and Alarms
- JJF 1711-2018 Calibration Specification for Sulfur Hexafluoride Decomposition Products Detectors
- JJF(轻工) 103-2018 Calibration specification for cleaning rate detection device of washing machine
- JJF(机械) 1003-2018 Calibration specification for light vehicle emission detection system
- JJF(机械)1003-2018 Calibration specification for light vehicle emission detection system
- JJF 2023-2023
- JJF 1154-2014 Calibration Specification for Four-wheel Aligners
- JJF 1485-2014 Calibration Specification for Roundness Flick Calibration Standard
- JJF 1154-2006 Calibration Specification for Four-wheel alignmenter
- JJF 1609-2017 Calibration Specification for Residual Chlorine Meters
- JJF(纺织) 030-2006 Specifications for Calibration of Whiteness Meter
- JJF 2046-2023 Calibration Specification for Standard Neutral Filters of Automobile Test Equipment
- JJF 1835-2020 Calibration Specification for Remote Sensing Measurement Systems of Vehicle Exhaust
- JJF 1873-2020 Calibration Specification for Diesel Vehicle Nitrogen Oxides(NOx) Measuring Instruments
- JJF 1063-2000 Calibration Specification for Instruments of Thread Inspection of Casing,Tubing,Line Pipe and New Rotary Shouldered Connection
- JJF 1252-2010 Calibration Specification for Measuring Instrument for Laser Paralleism of Micrometers
- JJF 1582-2016 Calibration Specification for(Specific) Activity Rapid Detecting Instrument
- JJF 1928-2021 Calibration Specification for Beam Quality Inspection Instruments of Radiation Therapy
- JJF(机械) 016-2008 Calibration specification for automatic rice cooker factory inspection device
- JJF(机械) 017-2008 Calibration specification for the factory sampling inspection device of the front-loading washing machine
- JJF(机械) 068-2009 Calibration specification for fan motor electrical performance testing device
- JJF(机械) 008-2008 Calibration specification for large modulus mechanical hob inspector
- JJF 1597-2016 Calibration Specification for DC Stabilized Power Supplies
- JJF 1096-2002 Calibration Specification for Calibrator of Extensometers
- JJF 1232-2009 Calibration Specification for Reflectometers
- JJF 1906-2021 Calibration Specification for Constant Magnetic Field Coils
- JJF 1728-2018 Calibration Specification for Ultrasonic Testing Instruments for Resin Matrix Composites
- JJF(建材)129-2018 Calibration Specification for Constant Temperature and Humidity Chambers for Safety Glass
- JJF(建材) 129-2018 Calibration specification for constant temperature and humidity chamber for safety glass testing
- JJF(纺织) 021-2013 Calibration Specification for Textile Yarn Length Tester
- JJF 1490-2014 Calibration Specification for Constant Bandwidth Filters
- JJF 1274-2011 Calibration Specification for Kinematic Viscosity Tester
- JJF(石化) 006-2018 Calibration Specification for Coating Flexibility Testers
- JJF 1968-2022 Calibration Specification for Determinators of Fluorine/Chlorine in Coal
- JJF(纺织)021-2013 Calibration Specification for Textile Yarn Length Tester
- JJF(石化)006-2018 Calibration Specification for Coating Flexibility Testers
- JJF(纺织) 021-2006 Calibration specification for fabric yarn length tester
- JJF 1377-2012 Calibration Specification for Wheel Alignment Testers of Level Type
- JJF 1973-2022
- JJF 1953-2021 Calibration Specification for Gas Chromatographs with Sulfur Chemiluminescence Detector
- JJF(机械) 012-2008 Calibration specification for small power single-phase motor automatic detection device
- JJF 2056-2023 Calibration Specification for Automatic Microbial Detection Systems based on Impedance Method
- JJF 1569-2016 Calibration Specification for Bromine Number and Bromine Index Meters
- JJF(纺织) 033-2016 Calibration Specification for Fabric Drapability Tester
- JJF 1251-2010 Calibration Specification for Measuring System of Coordinate Position
- JJF 1281-2011 Calibration Specification for Cut Tobacco Filling Power Tester
- JJF(石化) 030-2020 Calibration Specification for Thermal Stability Test at 75 ℃ Device
- JJF 1614-2017 Calibration Specification for Antibiotics Potency Analyzers
- JJF(石化)030-2020 Calibration Specification for Thermal Stability Test at 75 ℃ Device
- JJF(石化)029-2019 Calibration Specification for Film Return Tackiness Testers
- JJF(纺织)033-2016 Calibration Specification for Fabric Drapability Tester
- JJF(石化) 029-2019 Calibration specification for paint film back tack tester
- JJF(纺织) 033-2006 Calibration specification for fabric perpendicularity tester
- JJF(建材)136-2018 Calibration specification for glass softening point tester
- JJF(建材) 136-2018 Calibration specification for glass softening point tester
- JJF(机械) 047-2009 Calibration specification for particle size composition determination device
- JJF(汽车) 01-2008 Calibration specification for handling stability tester
Jiangsu Provincial Standard of the People's Republic of China, Lao calibration
- DB3204/T 1040-2022 Code of Integrity Behavior for Inspection, Testing, Verification and Calibration Institutions
Korean Agency for Technology and Standards (KATS), Lao calibration
- KS M ISO 18898:2010 Rubber-Calibration and verification of hardness testers
- KS A 0083-2013 Mass spectrometer(type leak) detector general rules for calibration system
- KS A 0083-2002 Mass-spectrometer-type leak-detector calibration
- KS A 0083-2023 Mass spectrometer(type leak) detector general rules for calibration system
- KS B ISO 2400:2019 Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 1
- KS B ISO 3530-2002(2012) Vacuum technology－Mass－spectrometer－type leak－detector calibration
- KS B ISO 12713:2018 Non-destructive testing — Acoustic emission inspection — Primary calibration of transducers
- KS B ISO 3530:2002 Vacuum technology-Mass-spectrometer-type leak-detector calibration
- KS B ISO 3530:2013 Vacuum technology－Mass－spectrometer－type leak－detector calibration
- KS Q ISO 11843-2:2009 Capability of detection－Part 2：Methodology in the linear calibration case
- KS B ISO 12714:2008 Non-destructive testing－Acoustic emission inspection－Secondary calibration of acoustic emission sensors
- KS Q ISO/IEC 17025:2006 General requirements for the competence of testing and calibration laboratories
- KS I ISO 6143-2015(2020) Gas analysis－Comparison methods for determining and checking the composition of calibration gas mixtures
- KS B ISO TR 7066-1-2004(2014) Assessment of uncertainty in calibration and use of flow measurement devices－Part 1：Linear calibration relationships
- KS B ISO 2400:2002 Welds in steel-Reference block for the calibration of equipment for ultrasonic examination
- KS X ISO 12645:2006 Graphic technology－Process control－Certified reference material for opaque area calibration of transmission densitometers
- KS Q ISO 11843-3-2009(2019) Capability of detection－Part 3：Methodology for determination of the critical value for the response variable when no calibration data are used
Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Lao calibration
- GJB/J 6202-2008 Calibration specification for device of measuring grade Ⅰring gauge
- GJB/J 5414-2005 Verification regulation for rang calibrator of power meter
- GJB/J 6203-2008 Calibration specification for the device used to measure grade one involute specimen and helix specimen
British Standards Institution (BSI), Lao calibration
- BS ISO 18898:2012 Rubber. Calibration and verification of hardness testers
- BS ISO 18898:2016 Rubber. Calibration and verification of hardness testers
- BS 7935-2:2004 Constant amplitude force calibration - Calibration of the calibration device instrumentation to be used for the dynamic calibration of non-resonant uniaxial dynamic testing systems - Method
- BS EN 12223:2000 Non-destructive testing - Ultrasonic examination - Specification for calibration block No.1
- BS EN ISO 2400:2012 Non-destructive testing. Ultrasonic testing. Specification for calibration block No. 1
- BS EN 12223:2000(2008) Non-destructive testing - Ultrasonic examination - Specification for calibration block No.1
- BS EN ISO 8222:2002 Petroleum measurement systems - Calibration - Temperature corrections for use when calibrating volumetric proving tanks
- BS ISO 11843-2:2000 Capability of detection. Methodology in the linear calibration case
- BS EN ISO 20486:2018 Non-destructive testing. Leak testing. Calibration of reference leaks for gases
- BS 7935-1:2004 Constant amplitude dynamic force calibration - Calibration and verification of non-resonant uniaxial dynamic testing systems - Method
- 19/30383995 DC BS EN ISO 8222. Petroleum measurement systems. Calibration. Temperature corrections for use when calibrating volumetric proving tanks
- BS EN ISO 6143:2001 Gas analysis. Comparison methods for determining and checking the composition of calibration gas mixtures
- BS EN ISO 6143:2006 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures
- 22/30437356 DC BS EN ISO 7963. Non-destructive testing. Ultrasonic testing. Specification for calibration block No. 2
- BS EN 13192:2002(2007) Non-destructive testing - Leak testing - Calibration of reference leaks for gases
- BS EN 13192:2002 Non-destructive testing - Leak testing - Calibration of reference leaks for gases
- BS 4289-8:1988 Methods for analysis of oilseeds - Check of the calibration of moisture meters
- BS ISO 19675:2017 Non-destructive testing. Ultrasonic testing. Specification for a calibration block for phased array testing (PAUT)
- BS EN ISO 376:2011 Metallic materials. Calibration of force-proving instruments used for the verification of uniaxial testing machines
- BS ISO 8196-2:2009 Milk - Definition and evaluation of the overall accuracy of alternative methods of milk analysis - Calibration and quality control in the dairy laboratory
- DD ISO/TS 28037:2010 Determination and use of straight-line calibration functions
- BS EN ISO 7963:2010 Non-destructive testing. Ultrasonic testing. Specification for calibration block No. 2
- BS EN ISO 7278-2:2022 Petroleum measurement systems - Pipe prover design, calibration and operation
International Organization for Standardization (ISO), Lao calibration
- ISO 18898:2016 Rubber - Calibration and verification of hardness testers
- ISO 18898:2012 Rubber - Calibration and verification of hardness testers
- ISO 18898:2006 Rubber - Calibration and verification of hardness testers
- ISO 20486:2017 Non-destructive testing - Leak testing - Calibration of reference leaks for gases
- ISO 7963:2022 Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 2
- ISO 19675:2017 Non-destructive testing - Ultrasonic testing - Specification for a calibration block for phased array testing (PAUT)
- ISO 3530:1979 Vacuum technology; Mass-spectrometer-type leak-detector calibration
- ISO 376:2004 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines
- ISO/CD 16946 Non-destructive testing — Ultrasonic testing — Specification for step wedge calibration block
- ISO/DIS 16946:2023 Non-destructive testing — Ultrasonic testing — Specification for a step wedge calibration block
- ISO 11843-2:2000 Capability of detection - Part 2: Methodology in the linear calibration case
- ISO 16946:2015 Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block
- ISO 16946:2017 Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block
- ISO 12714:1999 Non-destructive testing - Acoustic emission inspection - Secondary calibration of acoustic emission sensors
- ISO/IEC 17025:1999 General requirements for the competence of testing and calibration laboratories
- ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
- ISO/CD 6506-2 Metallic materials — Brinell hardness test — Part 2: Verification and calibration of testing machines
- ISO/CD 6143 Gas analysis — Comparison methods for determining and checking the composition of calibration gas mixtures
- ISO/DIS 6143:2023 Gas analysis — Comparison methods for determining and checking the composition of calibration gas mixtures
- ISO 6711:1981 Gas analysis — Checking of calibration gas mixtures by a comparison method
- ISO/DIS 6508-2 Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines and indenters
Zhejiang Provincial Standard of the People's Republic of China, Lao calibration
Military Standard of the People's Republic of China-General Armament Department, Lao calibration
- GJB 8625-2015 Calibration specifications for first-class ring gauge verification equipment
- GJB 8819-2015 Calibration procedures for power indicator range calibrators
- GJB 1317A-2006 General requirements for drafting military verification regulation and calibration regulation
- GJB/J 3407-1998 Calibration procedures for dynamic calibration devices for spatial position measurement of flexible nozzles
- GJB 8626-2015 Calibration specifications for first-class involute and spiral model verification instruments
- GJB 5109-2004 Equipment metrology support general requirements testing and calibration
Japanese Industrial Standards Committee (JISC), Lao calibration
- JIS Z 2340:2002 Confirmation method of calibration by visual calibration gauge on magnetic particle and liquid penetrant testing
- JIS B 7556:2016 Calibration and proving test for gas flowmeter
- JIS B 7556:2022 Calibration and proving test for gas flowmeter
- JIS B 7724:2017 Brinell hardness test -- Verification and calibration of testing machines
- JIS Q 0032:1998 Calibration in analytical chemistry and use of certified reference materials
- JIS B 7726:2017 Rockwell hardness test -- Verification and calibration of testing machines and indenters
- JIS Z 8754:1988 Mass-spectrometer-type leak-detector calibration
- JIS Z 8462-2:2003 Capability of detection -- Part 2: Methodology in the linear calibration case
RU-GOST R, Lao calibration
- GOST 8.339-1978 State system for ensuring the uniformity of measurements. Seconds-timers-gauges. Methods and means for verification
- GOST R ISO 11843-2-2007 Statistical methods. Capability of detection. Part 2. Methodology in the linear calibration case
RO-ASRO, Lao calibration
- STAS 7802/2-1979 CALIBRATING BLOCKS FOR VERIFYING AND REGULATING OF FLAW DETECTORS Calibrating blocks type Al
- STAS 7802/3-1979 CALIBRATING BLOCKS FOR VERIFYING AND REGULATING OF FLAW DETECTORS Calibrating blocks type A2
- STAS 7802/4-1979 CALIBRATING BLOCKS FOR VERIF YIND AND REGULATING OF FLAW DETECTORS Calibrating blocks type A3
- STAS 7802/5-1979 CALIBRAT IN G BLOCKS FOR GHECK1NG AND REGULATING OF FLAW DETECTORS Calibrating blocks type A4
AR-IRAM, Lao calibration
Group Standards of the People's Republic of China, Lao calibration
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Lao calibration
- GB/T 36412-2018 Verification and calibration of force standard machines
- GB/T 19799.2-2012/ISO 7963:2006 Non=destructive testing--Ultrasonic testing--Specification for calibration block No.2
- GB/T 19799.2-2012/ISO 7963-2006 Non=destructive testing--Ultrasonic testing--Specification for calibration block No.2
- GB/T 19799.2-2005 Non-destructive testing.Ultrasonic testing.Calibration block No.2
- GB/T 19799.1-2005 Non-destructive testing-Ultrasonic testing-Calibration block No.1
- GB/T 19799.2-2012 Non-destructive testing.Ultrasonic testing.Specification for calibration block No.2
- GB/T 19799.1-2015 Non-destructive testing.Ultrasonic testing.Specification for calibration block No. 1
- GB/T 18193-2000 Vacuum technology-Mass-spectrometer-type leak detector calibration
- GB/T 21699-2008 Verification/calibration method of rotatingmelement current meters in straight open tank
- GB/T 33260.5-2018 Capability of detection.Part 5:Methodology in the linear and nonlinear calibration cases
- GB/T 13634-2000 Calibration of force-proving instruments used for the verification of testing machines
- GB/T 19800-2005 Non-destructive testing-Acoustic emission inspection-Primary calibration of transducers
- GB/T 13634-2008 Calibration of force-proving instruments used for the verification of uniaxial testing machines
- GB/T 19801-2005 Non-destructive testing-Acoustic emission inspection-Secondary calibration of acoustic emission sensors
- GB/T 15481-2000 General requirements for the competence of testing and calibration laboratories
- GB/T 27025-2008 General requirements for the competence of testing and calibration laboratories
- GB/T 16825.1-2022 Metallic materials—Calibration and verification of static uniaxial testing machines—Part1:Tension/compression testing machines—Calibration and verification of the force-measuring system
- GB/T 10628-2008 Gas analysis.Comparison methods for determining and checking the composition of calibration gas mixtures
NL-NEN, Lao calibration
Association Francaise de Normalisation, Lao calibration
- FD X07-029-2:2005 Metrology - Thermometer verification and calibration procedures - Part 2 : verification and calibration procedures for thermocouples alone and thermocouple thermometers
- NF V03-711:1984 Cereals. Check of the calibration of moisture meters.
- NF A09-461:2002 Non-destructive testing - Leak test - Calibration of gaseous reference leaks.
- NF EN ISO 2400:2012 Essais non destructifs - Contrôle par ultrasons - Spécifications relatives au bloc d'étalonnage no 1
- NF A09-311:2000 Non-destructive testing - Ultrasonic examination - Specification for calibration block No. 1.
- NF A09-311*NF EN ISO 2400:2012 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1
- NF EN ISO 20486:2018 Essais non destructifs - Contrôle d'étanchéité - Étalonnage des fuites de référence des gaz
- NF EN ISO 7963:2022 Essais non destructifs - Contrôle par ultrasons - Spécifications relatives au bloc d'étalonnage no 2
- NF X10-531:1981 Calibratium of the helium leak for leak detectors.
- NF A09-310:1987 NON-DESTRUCTIVE TESTING. ULTRASONIC TESTING. CALIBRATION BLOCKS TYPES A AND B.
- NF A09-461*NF EN ISO 20486:2018 Non-destructive testing - Leak testing - Calibration of reference leaks for gases
- NF EN ISO 16946:2017 Essais non destructifs - Essais par ultrasons - Spécifications relatives aux blocs d'étalonnage à gradins
- NF A09-018*NF ISO 19675:2017 Non-destructive testing - Ultrasonic testing - Specification for a calibration block for phased array testing (PAUT)
- NF A09-312*NF EN ISO 16946:2017 Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block
- NF ISO 19675:2017 Essais non destructifs - Contrôle par ultrasons - Spécifications relatives au bloc d'étalonnage pour la technique multi-éléments
- NF X50-061*NF EN ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories.
- NF X50-061*NF EN ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories
- NF EN ISO/IEC 17025:2017 Exigences générales concernant la compétence des laboratoires d'étalonnages et d'essais
- NF A03-152-2*NF EN ISO 6506-2:2018 Metallic materials - Brinell hardness test - Part 2 : verification and calibration of testing machines
- NF A03-150-2*NF EN ISO 4545-2:2018 Metallic materials - Knoop hardness test - Part 2 : verification and calibration of testing machines
- NF A03-154-2*NF EN ISO 6507-2:2018 Metallic materials - Vickers hardness test - Part 2 : verification and calibration of testing machines
- NF ISO 11843-3:2003 Capacité de détection - Partie 3 : méthodologie pour déterminer la valeur critique d'une variable de réponse lorsque aucun étalonnage n'est utilisé
- NF A89-611:1992 Welds in steel. Calibration block number 2 for ultrasonic examination of welds.
American Society for Testing and Materials (ASTM), Lao calibration
- ASTM E126-12 Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers
- ASTM E126-13a Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers
- ASTM E915-10 Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement
- ASTM F78-97 Standard Test Method for Calibration of Helium Leak Detectors by Use of Secondary Standards
- ASTM F78-97(2002) Standard Test Method for Calibration of Helium Leak Detectors by Use of Secondary Standards
- ASTM E915-96 Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement
- ASTM E915-16 Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement
- ASTM E915-96(2002) Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement
- ASTM C1426-99(2004) Standard Practices for Verification and Calibration of Polarimeters
- ASTM C1426-99 Standard Practices for Verification and Calibration of Polarimeters
- ASTM C1426-09 Standard Practices for Verification and Calibration of Polarimeters
- ASTM E2719-09(2022) Standard Guide for Fluorescence—Instrument Calibration and Qualification
- ASTM E2719-09 Standard Guide for Fluorescencex2014;Instrument Calibration and Qualification
- ASTM E1458-12 Standard Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles
- ASTM E181-10 Standard Test Methods for Detector Calibration and Analysis of Radionuclides
- ASTM E181-17 Standard Test Methods for Detector Calibration and Analysis of Radionuclides
- ASTM D6318-03 Standard Practice for Calibrating a Fathometer Using a Bar Check Method
- ASTM D6318-03(2008) Standard Practice for Calibrating a Fathometer Using a Bar Check Method
- ASTM D6318-03(2014) Standard Practice for Calibrating a Fathometer Using a Bar Check Method
- ASTM E126-13 Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers
- ASTM E2719-09(2014) Standard Guide for Fluorescencemdash;Instrument Calibration and Qualification
- ASTM E126-19 Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers
- ASTM E2063-05 Standard Practice for Calibration and Functionality Checks Used in Forensic Psychophysiological Detection of Deception (Polygraph) Examinations
- ASTM E2063-12(2017) Standard Practice for Calibration and Functionality Checks Used in Forensic Psychophysiological Detection of Deception (Polygraph) Examinations
- ASTM E1458-92(2001) Standard Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles
- ASTM E1458-12(2016) Standard Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles
Danish Standards Foundation, Lao calibration
- DS/EN ISO 8222:2003 Petroleum measurement systems - Calibration - Temperature corrections for use when calibrating volumetric proving tanks
- DS/EN ISO 7963:2010 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2
- DS/EN ISO 2400:2012 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1
- DS/EN ISO 376:2011 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines
- DS/EN ISO/IEC 17025/AC:2006 General requirements for the competence of testing and calibration laboratories
- DS/EN ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
- DS/EN ISO 6506-2:2006 Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines
- DS/EN ISO 4545-2:2006 Metallic materials - Knoop hardness test - Part 2: Verification and calibration of testing machines
- DS/EN ISO 6507-2:2006 Metallic materials - Vickers hardness test - Part 2: Verification and calibration of testing machines
- DS/EN ISO 6143:2006 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures
- DS/EN 27 963:1992 Welds in steel - Calibration block No. 2 for ultrasonic examination of welds
- DS/ISO/TS 28037:2010 Determination and use of straight-line calibration functions
- DS/ISO 11843-2/Corr. 1:2007 Capability of detection - Part 2: Methodology in the linear calibration case
- DS/ISO 11843-2:2003 Capability of detection - Part 2: Methodology in the linear calibration case
American National Standards Institute （ANSI), Lao calibration
NO-SN, Lao calibration
- NS 10210-1982 Non-destructive testing - Ultrasonic testing - Calibration block 1
Shaanxi Provincial Standard of the People's Republic of China, Lao calibration
- DB61/T 1327.3-2020 Qualification Accreditation of Inspection and Testing Institutions Part 3: Requirements for Confirmation of Equipment Verification and Calibration Results
SE-SIS, Lao calibration
- SIS SS 11 42 41-1979 Ultrasonic testing — Calibration block No 2
- SIS SS 11 03 11-1987 Metallic materials - Calibration of force proving instruments used for the verifi-cation of uniaxial testing machines
- SIS SS 11 03 32-1982 Hardness test - Brinell test - Direct verification of standardizing machine for calibration of standardized blocks
- SIS 11 42 40-1974 Calibration block No. 1 for ultrasonic testing
- SIS SS-EN 27 963-1992 Welds in steel — Calibration block No. 2 for ultrasonic examination of welds (ISO 7963:1985)
IT-UNI, Lao calibration
Henan Provincial Standard of the People's Republic of China, Lao calibration
- DB41/T 1037-2015 Verticality measuring ruler calibration device
- DB41/T 2454-2023 Technical Specifications for Validity Confirmation of Verification and Calibration Certificates for Measuring Instruments
API - American Petroleum Institute, Lao calibration
- API MPMS 4.9.2-2005 Manual of Petroleum Measurement Standards Chapter 4Proving Systems Section 9Methods of Calibration for Displacement and Volumetric Tank Provers Part 2Determination of the Volume of Displacement and Tank Provers by the Waterdraw Method of Calibration (Firs
ZA-SANS, Lao calibration
- SANS 604:2007 Calibration in analytical chemistry and use of certified reference materials
- SANS 11843-2:2009 Capability of detection Part 2: Methodology in the linear calibration case
- SANS 6150:2010 Verification of compression testing machines for concrete: Calibration of load scale
国家市场监督管理总局、中国国家标准化管理委员会, Lao calibration
- GB/T 33260.2-2018 Capability of detection—Part 2: Methodology in the linear calibration case
- GB/T 38243-2019 Rubber—Calibration and verification of hardness testers
- GB/T 40336-2021 Non-destructive testing—Leak testing—Calibration of reference leaks for gases
- GB/T 27025-2019 General requirements for the competence of testing and calibration laboratories
- GB/T 13634-2019 Metallic materials—Calibration of force-proving instruments used for the verification of uniaxial testing machines
Lithuanian Standards Office , Lao calibration
- LST EN ISO 8222:2002 Petroleum measurement systems - Calibration - Temperature corrections for use when calibrating volumetric proving tanks (ISO 8222:2002)
- LST EN ISO 7963:2010 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2006)
- LST EN ISO 2400:2012 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1 (ISO 2400:2012)
- LST EN ISO 6143:2007 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2001)
AENOR, Lao calibration
- UNE-EN ISO 8222:2003 Petroleum measurement systems. Calibration. Temperature corrections for use when calibrating volumetric proving tanks (ISO 8222:2002)
- UNE-EN ISO/IEC 17025:2005 Conformity assessment. General requirements for the competence of testing and calibration laboratories
- UNE-EN ISO 7963:2011 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2006)
- UNE-EN ISO 2400:2013 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1 (ISO 2400:2012)
- UNE-EN ISO 16946:2017 Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block (ISO 16946:2017)
- UNE-EN ISO 6143:2007 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2001)
ANSI - American National Standards Institute, Lao calibration
- N15.20-1975 Guide to Calibrating Nondestructive Assay Systems (INMM)
Yunnan Provincial Standard of the People's Republic of China, Lao calibration
Professional Standard - Agriculture, Lao calibration
- CNAS-CL01-A025-2022 Explanation on the Application of Testing and Calibration Laboratory Competence Accreditation Criteria in the Field of Calibration
- CNAS-CL01-A002-2018 Explanation on the Application of Testing and Calibration Laboratory Competence Accreditation Criteria in the Field of Chemical Testing
- CNAS-CL01-A006-2021 Explanation on the Application of Testing and Calibration Laboratory Competence Accreditation Criteria in the Field of Nondestructive Testing
- CNAS-CL01-A002-2020 Explanation on the Application of Testing and Calibration Laboratory Competence Accreditation Criteria in the Field of Chemical Testing
- CNAS-CL01-A003-2019 Instructions for the Application of Testing and Calibration Laboratory Competence Accreditation Criteria in the Field of Electrical Testing
- CNAS-CL01-G001-2018 Application Requirements of CNAS-CL01
- CNAS-RL01-2019 Explanation on the Application of Testing and Calibration Laboratory Competence Accreditation Criteria in the Field of Microbiological Testing
- CNAS-CL01-A001-2018 Explanation on the Application of Testing and Calibration Laboratory Competence Accreditation Criteria in the Field of Microbiological Testing
- CNAS-CL01-A001-2022 Explanation on the Application of Testing and Calibration Laboratory Competence Accreditation Criteria in the Field of Microbiological Testing
- CNAS-EL15-2020 Explanation of Acceptance Requirements for Accreditation of Testing and Calibration Laboratories
- CNAS-EL-13-2019 Instructions for the approval of relevant requirements for test reports and calibration certificates
European Committee for Standardization (CEN), Lao calibration
- EN 12223:1999 Non-Destructive Testing - Ultrasonic Examination - Specification for Calibration Block No. 1
- EN ISO 16946:2015 Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block (ISO 16946:2015)
- prEN ISO 16946 rev Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block
- EN 13192:2001 Non destructive testing - Leak testing - Calibration of reference leaks for gases
- EN ISO 6143:2006 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2001)
- EN ISO 16946:2017 Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block
- EN ISO/IEC 17025:2000 General Requirements for the Competence of Testing and Calibration Laboratories ISO/IEC 17025: 1999
- EN ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories
- EN 27963:1992 Welds in Steel - Calibration Block No. 2 for Ultrasonic Examination of Welds
Indonesia Standards, Lao calibration
- SNI ISO 2400:2014 Non-destructive testing - Ultrasonic testing -Specification for calibration block No.1
- SNI ISO/IEC 17025:2008 General requirements for the competence of testing and calibration laboratories
KR-KS, Lao calibration
- KS B ISO 2400-2019 Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 1
- KS B ISO 12713-2018 Non-destructive testing — Acoustic emission inspection — Primary calibration of transducers
- KS A 0083-2013(2023) Mass spectrometer(type leak) detector general rules for calibration system
German Institute for Standardization, Lao calibration
- DIN EN ISO 2400:2013-01 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1 (ISO 2400:2012); German version EN ISO 2400:2012
- DIN EN ISO 7963:2023-02 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2022); German version EN ISO 7963:2022
- DIN EN ISO 20486:2018-05 Non-destructive testing - Leak testing - Calibration of reference leaks for gases (ISO 20486:2017); German version EN ISO 20486:2018
- DIN 51220:2003 Materials testing machines - Generals for requirements and for verification and calibration of materials testing machines
- DIN EN ISO 16946:2017-07 Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block (ISO 16946:2017); German version EN ISO 16946:2017
- DIN EN ISO 7963:2023 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2022)
- DIN EN ISO 20486:2018 Non-destructive testing - Leak testing - Calibration of reference leaks for gases (ISO 20486:2017)
- DIN ISO 11843-2:2006 Capability of detection - Part 2: Methodology in the linear calibration case (ISO 11843-2:2000; text in German, English)
- DIN EN ISO 6143:2006-11 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2001); German version EN ISO 6143:2006
- DIN 5684-2:1984 Calibrated and tested round steel link chains for lifting purposes; grade 6
- DIN 5684-1:1984 Calibrated and tested round steel link chains for lifting purposes; grade 5
- DIN EN ISO 16946:2023-08 Non-destructive testing - Ultrasonic testing - Specification for a step wedge calibration block (ISO/DIS 16946:2023); German and English version prEN ISO 16946:2023 / Note: Date of issue 2023-07-07*Intended as replacement for DIN EN ISO 16946 (2017-07).
Professional Standard - Electron, Lao calibration
- SJ 20236-1993 Verification regulation of the model GH2050/51 calibrator for transistor characteristic tracer
- SJ/T 31369-1994 Integrity requirements and inspection and evaluation methods of calibration devices and collar machines for air-conditioner production
- SJ/T 31035-1994 Requirements of readiness and methods of inspection and assessment for bend dressing machines
YU-JUS, Lao calibration
- JUS C.H4.020-1995 Round-steel link chains, grade 2, non-calibrated, tested
- JUS C.H4.021-1995 Round-steel link chains, grade 2, calibrated, tested
- JUS C.H4.022-1994 Round steel link chains for lifting purposes , grade 5 (p)-Calibrated - Tested
- JUS C.H4.023-1994 Round-steel link chains for lifting purposes , grade 6 (S)-Calibrated - Tested
- JUS C.H4.056-1994 Round-steel link chains, grade,8 non-calibrated, tested
- JUS C.H4.024-1994 Round-steel link chains for lifting purposes , grade 8 (T)-Calibrated - Tested
- JUS C.H4.052-1994 Round-steel link chains, grade 5 (P) non-calibrated,tested
CEN - European Committee for Standardization, Lao calibration
- EN ISO 20486:2018 Non-destructive testing - Leak testing - Calibration of reference leaks for gases
Professional Standard - Machinery, Lao calibration
- JB/T 7586-1994 Partial discharge detectors. Calibrator of apparent discharge
- JB/T 8428-1996 Calibration of standard test blocks for ultrasonic testing instruments of steel welds
Professional Standard - Electricity, Lao calibration
- DL/T 1787-2017 Calibration specification for relative dielectric loss and capacitance detector
AASHTO - American Association of State Highway and Transportation Officials, Lao calibration
- R 61-2012 Standard Practice for Establishing Requirements for Equipment Calibrations@ Standardizations@ and Checks
- PP 57-2006 Standard Practice for Establishing Requirements for and Performing Equipment Calibrations@ Standardizations@ and Checks
ES-UNE, Lao calibration
- UNE-EN ISO 7963:2023 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2022)
- UNE-EN ISO 20486:2018 Non-destructive testing - Leak testing - Calibration of reference leaks for gases (ISO 20486:2017)
TH-TISI, Lao calibration
- TIS 17025-2005 General requirements for the competence of testing and calibration laboratories
- TIS 1300-1994 General requirements for teh competence of calibration and testing laboratories
American Society of Quality Control （ASQC), Lao calibration
- ASQ 17025-1999 General requirements for the competence of testing and calibration laboratories T17025E
- ASQ 17025-2005 General requirements for the competence of testing and calibration laboratories T804
Taiwan Provincial Standard of the People's Republic of China, Lao calibration
- CNS 10049-1983 Method of Test for Load Calibration Devices for Verifying Material Testing Machines
Standard Association of Australia （SAA）, Lao calibration
GOSTR, Lao calibration
CN-QIYE, Lao calibration
- Q/GDW 1439-2014 Calibration specification for multi-functional electric measuring and testing device
未注明发布机构, Lao calibration
Institute of Electrical and Electronics Engineers (IEEE), Lao calibration
- IEEE/ANSI N42.12-1980 American National Standard Calibration and Usage of Sodium Iodide Detector Systems
- ANSI Std N42.12-1980 American National Standard Calibration and Usage of Sodium Iodide Detector Systems
Fujian Provincial Standard of the People's Republic of China, Lao calibration
- JJF（闽）1085-2018 Calibration Specification for Portable Raman spectrum fast detection instruments
IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Lao calibration
- IEEE N42.12-1980 CALIBRATION AND USAGE OF SODIUM IODIDE DETECTOR SYSTEMS (R 1991)
- IEEE N42.13-2004 "Calibration and Usage of ""Dose Calibrator"" Ionization Chambers for the Assay of Radionuclides"
- IEEE N42.13-1986 "Calibration and Usage of ""Dose Calibrator"" Ionization Chambers for the Assay of Radionuclides"
The American Road & Transportation Builders Association, Lao calibration
- AASHTO PP 57-2006(R2009) Standard Practice for Establishing Requirements for and Performing Equipment Calibrations, Standardizations, and Checks
Association of German Mechanical Engineers, Lao calibration
- VDI/VDE 2629 Blatt 2-2012 Accuracy of contour-measuring systems - Characteristics and their checking - Determination of the uncertainty of specific contour measurements using standards/calibrated workpieces
AT-ON, Lao calibration
- ONORM EN 27963-1992 Welds in steel - Calibration block No. 2 for ultrasonic examination of welds
Professional Standard - Energy, Lao calibration
- NB/T 11056-2023 Calibration specification for automatic detection device of relay protection tester
GB-REG, Lao calibration