ZH
RU
ES

Emissions

Emissions, Total:51 items.

In the international standard classification, Emissions involves: Air quality, Internal combustion engines for road vehicles, Transport, Fuels, Diagnostic, maintenance and test equipment, Internal combustion engines, Electric road vehicles.

TH-TISI, Emissions

TIS 2560-2011 Exhaust emissions from motor vehicles:test method

US-FCR, Emissions

FCR UFGS-L-15802N-2001 FIRE APPARATUS VEHICLE EXHAUST REMOVAL SYSTEM

API - American Petroleum Institute, Emissions

API 4109-1971 EVALUATION OF INSTRUMENTS FOR VEHICLE EXHAUST EMISSION INSPECTION
API PUBL 4572-1994 In-Use Vehicle Exhaust Emissions Study: Controlled Testing
API 4101-1971 THE ECONOMIC EFFECTIVENESS OF MANDATORY ENGINE MAINTENACE FOR REDUCING VEHICLE EXHAUST EMISSIONS
API 4203-1972 A Study of Mandatory Engline Maintenance for Reducing Vehicle Exhaust Emissions volume I. Executive Summary
API PUBL 4470 VOL I-1988 Exhaust Benzene Emissions from Late Model Vehicles (Volume I)
API 4134-1972 The Economic Effectiveness Mandatory Engine Maintenance for Reducing Vehicle Exhaust Emissions CRC Extended Phase I Study
API 4163-1972 A Study of Mandatory Engine Maintenance for Reducing Vehicle Exhaust Emissions Volume III. A Documentation Handbook for the Economic Effectiveness Model
API PUBL 4557-1994 Effects of Specific Fuel Aromatic Compounds on Motor Vehicle Exhaust Emissions Volume I Statistical Analysis and Interpretation Volume II Procedures and Data Report
API 4164-1972 A Study of Mandatory Engine Maintenance for Reducing Vehicle Exhaust Emissions Volume IV. Experimental Characterization of Vehicle Emissions and Maintenance States
API 4102-1971 The Economic Effectiveness of Mandatory Engine Maintenance for Reducing Vehicle Exhaust Emissions Volume III Inspection/Maintenance Procedures Development
API 4108 VOL II-1972 The Economic Effectiveness of Mandatory Engine Maintenance for Reducing Vehicle Exhaust Emissions Volume II Modeling of Inspection/Maintenance Systems
API 4165-1972 A STUDY OF MANDATORY ENGINE MAINTENANCE FOR REDUCING VEHICLE EXHAUST EMISSIONS - VOLUME V: EXPERIMENTAL INVESTIGATION OF SERVICE ORGANIZATION MAINTENANCE PERFORMANCE
API 4197-1973 A Study of Mandatory Engine Maintenance for Reducing Vehicle Exhaust Emissions Volume VIII. Experimental Characterization of Vehicle Emissions and Maintenance States - FINAL REPORT
API 4162-1972 A STUDY OF MANDATORY ENGINE MAINTENANCE FOR REDUCING VEHICLE EXHAUST EMISSIONS - VOLUME II: MANDATORY INSPECTION/MAINTENANCE SYSTEMS STUDY
API 4198-1973 A Study of Mandatory Engine Maintenance for Reducing Vehicle Exhaust Emissions Volume VII. A User's Manual and Guide to the Economic Effectiveness Computer Program - Final Report

Korean Agency for Technology and Standards (KATS), Emissions

KS R 1062-2013 Test code of exhaust emission control devices for atuomobiles
KS R 1062-2005(2010) Test code of exhaust emission control devices for atuomobiles
KS R ISO 16185:2006 Road vehicles－Engine families for certification ofheavy－duty vehicles－Exhaust emissions
KS R 0122-2012 Road vehicles－Exhaust emissions and fuel consumption measurements for externally chargeable hybrid electric vehicles

Indonesia Standards, Emissions

SNI 19-7117.1-2005 Exhaust gas emissions - Stationary sources - Part 1: Determination of flow speed rates
SNI 19-7117.2-2005 Exhaust gas emissions - Stationary source - Part 2: Determination of location and cross-points of particle test sampling
SNI 19-7117.12-2005 Exhaust gas emissions - Stationary sources - Part 12: The determination of particle total by isokinetic
SNI 19-7117.4-2005 Exhaust gas emissions - Stationary sources - Part 4: Test methods of fume content by gravimetry
SNI 19-7117.3.2-2005 Exhaust gas emissions - Stationary sources - Part 3: Sulphur oxides (SOx) - Section 2: Test methods by neutralization titrimetry
SNI 19-7117.11-2005 Exhaust gas emissions - Stationary sources - Part 11: Opacity test methods for black smoke using Ringelmann scales
SNI 09-7118.3-2005 Exhaust gas emissions - Movable source - Part 3: Test methods of motor vehicles category L at idle condition
SNI 19-7117.6-2005 Exhaust gas emissions - Stationary sources - Part 6: Test methods of ammonia (NH3) content by indophenol methods using spectrophotometers
SNI 19-7117.5-2005 Exhaust gas emissions - Stationary sources - Part 5: Test methods of nitrogen oxides by phenol dissulphonic acid (PDS) using spectrophotometers
SNI 19-7117.3.1-2005 Exhaust gas emissions - Stationary sources - Part 3: Sulphur oxides (SOx) - Section 1: Turbidimetry test methods using spectrophotometers
SNI 19-7117.8-2005 Exhaust gas emissions - Stationary sources - Part 8: Test methods of hydrogen chloride (HCl) content by mercury thiocyanate using spectrophotometers
SNI 09-7118.1-2005 Exhaust gas emissions - Movable source - Part 1: Test methods of motor vehicles category M, N and O having a motivator lighter ignition at idle condition
SNI 09-7118.2-2005 Exhaust gas emissions - Movable source - Part 2: Test methods of motor vehicles category M, N and O having a motivator compression ignition at free acceleration condition
SNI 19-7117.10-2005 Exhaust gas emissions - Stationary sources - Part 10: Test methods of CO, CO2 and O2 concentration using automatic analysis instrumentation

HU-MSZT, Emissions

MSZ 21865-1983

RO-ASRO, Emissions

STAS 10474-1987

Jiangsu Provincial Standard of the People's Republic of China, Emissions

DB32/T 3195-2017 Technical Specifications for Exhaust Emission Performance Maintenance of In-use Vehicles

International Organization for Standardization (ISO), Emissions

ISO 16185:2000 Road vehicles - Engine families for certification of heavy-duty vehicles - Exhaust emissions
ISO/PAS 3930:2009 Instruments for measuring vehicle exhaust emissions - Metrological and technical requirements; Metrological control and performance tests (First Edition)
ISO/TS 23362:2021 Nanotechnologies - Nanostructured porous alumina as catalyst support for vehicle exhaust emission control - Specification of characteristics and measurement methods

Association Francaise de Normalisation, Emissions

NF T35-300*NF EN 12753+A1:2010 Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements
NF T35-300/IN1*NF EN 12753/IN1:2010 Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements

European Committee for Standardization (CEN), Emissions

PD CEN/TR 16569:2013 Automotive fuels - Assessing the effects of E10 petrol on vehicle emissions and performance

IX-ICAO, Emissions

ICAO 9646-1995 ICAO Engine Exhaust Emissions Data Bank First Edition; Printed: 04/1995

未注明发布机构, Emissions

ISO/PAS 03930:2009 Instruments for measuring vehicle exhaust emissions — Metrological and technical requirements; Metrological control and performance tests

German Institute for Standardization, Emissions

DIN EN ISO 8178-4:1996 Reciprocating internal combustion engines - Exhaust emission measurement - Part 4: Test cycles for different engine applications (ISO 8178-4:1996); German version EN ISO 8178-4:1996

British Standards Institution (BSI), Emissions

BS PD ISO/TS 23362:2021 Nanotechnologies. Nanostructured porous alumina as catalyst support for vehicle exhaust emission control. Specification of characteristics and measurement methods
PD ISO/TS 23362:2021 Nanotechnologies. Nanostructured porous alumina as catalyst support for vehicle exhaust emission control. Specification of characteristics and measurement methods

Danish Standards Foundation, Emissions

DS/ISO/TS 23362:2021 Nanotechnologies – Nanostructured porous alumina as catalyst support for vehicle exhaust emission control – Specification of characteristics and measurement methods

US-CFR-file, Emissions

CFR 40-1037.104-2014 Protection of Environment. Part1037:Control of emissions from new heavy–duty motor vehicles. Section1037.104:Exhaust emission standards for CO2, CH4, and N2O for heavy-duty vehicles at or below 14,000 pounds GVWR.