ZH
RU
ES
Melting point standard deviation
Melting point standard deviation, Total:500 items.
In the international standard classification, Melting point standard deviation involves: Non-ferrous metals, Products of the chemical industry, Environmental testing, Organic chemicals, Waxes, bituminous materials and other petroleum products, Physics. Chemistry, Electronic display devices, Thermodynamics and temperature measurements, Edible oils and fats. Oilseeds, Medical equipment, Welding, brazing and soldering, MECHANICAL SYSTEMS AND COMPONENTS FOR GENERAL USE, Raw materials for rubber and plastics, Analytical chemistry, Surface treatment and coating, Quality, Industrial furnaces, Measurement of volume, mass, density, viscosity, Insulating materials, Textile fibres, Products of the textile industry, Mathematics, Information technology (IT) in general, Bottles. Pots. Jars, Iron and steel products, Road vehicle systems, Electrical accessories, Products of non-ferrous metals, Ferrous metals, Metrology and measurement in general, Testing of metals, Plastics, Refractories, Cereals, pulses and derived products, Shipbuilding and marine structures in general, Linear and angular measurements, Ground service and maintenance equipment, Pipeline components and pipelines, Audio, video and audiovisual engineering, Construction materials, Glass, Rotating machinery, Character sets and information coding, Services, Optics and optical measurements, Inorganic chemicals, Applications of information technology, Road engineering, Test conditions and procedures in general, Adhesives, Energy and heat transfer engineering in general, Tea. Coffee. Cocoa, Nuclear energy engineering, Crude petroleum, Protection against fire, Screw threads, Coals, Fluid storage devices, Burners. Boilers, Environmental protection, Petroleum products in general, Standardization. General rules, Food products in general, Leisure. Tourism, Aerospace electric equipment and systems.
American Society for Testing and Materials (ASTM), Melting point standard deviation
- ASTM B774-00(2005) Standard Specification for Low Melting Point Alloys
- ASTM B774-00 Standard Specification for Low Melting Point Alloys
- ASTM F766-82(2000)e1 Standard Test Method for Melting Point of Waxes
- ASTM F766/F766M-82(2010)e1 Standard Test Method for Melting Point of Waxes
- ASTM B774-00(2005)e1 Standard Specification for Low Melting Point Alloys
- ASTM B774-00(2014) Standard Specification for Low Melting Point Alloys
- ASTM B774-00(2010) Standard Specification for Low Melting Point Alloys
- ASTM E324-23 Standard Test Method for Relative Initial and Final Melting Points and the Melting Range of Organic Chemicals
- ASTM B774/B774M-21 Standard Specification for Low Melting Point Alloys and Solders
- ASTM E324-99 Test Method for Relative Initial and Final Melting Points and the Melting Range of Organic Chemicals
- ASTM D1465-04 Standard Test Method for Blocking and Picking Points of Petroleum Wax
- ASTM D1465-10(2015) Standard Test Method for Blocking and Picking Points of Petroleum Wax
- ASTM F2625-10(2016) Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry
- ASTM D127-87(2004) Standard Test Method for Drop Melting Point of Petroleum Wax Including Petrolatum
- ASTM D127-63(1977) Standard Test Method for Drop Melting Point Of Petroleum Wax Including Petrolatum
- ASTM D127-19 Standard Test Method for Drop Melting Point of Petroleum Wax, Including Petrolatum
- ASTM F2625-10 Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry
- ASTM D5440-93(1997) Standard Test Method for Determining the Melting Point of Fats and Oils
- ASTM D87-07 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
- ASTM D87-07a Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
- ASTM D5440-93(2009) Standard Test Method for Determining the Melting Point of Fats and Oils
- ASTM D5440-17(2021) Standard Test Method for Determining the Melting Point of Fats and Oils
- ASTM D87-09(2014) Standard Test Method for Melting Point of Petroleum Wax 40;Cooling Curve41;
- ASTM D5440-17 Standard Test Method for Determining the Melting Point of Fats and Oils
- ASTM F2625-07 Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry
- ASTM D87-09 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
- ASTM D87-09(2018) Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
- ASTM E1648-95(2001) Standard Reference Radiographs for Examination of Aluminum Fusion Welds
- ASTM D1519-95(2009)e1 Standard Test Method for Rubber Chemicals-Melting Range
- ASTM E1648-95(2011) Standard Reference Radiographs for Examination of Aluminum Fusion Welds
- ASTM E324-79(1989)e1 Standard Test Method for Relative Initial and Final Melting Points and the Melting Range of Organic Chemicals
- ASTM E324-16 Standard Test Method for Relative Initial and Final Melting Points and the Melting Range of Organic Chemicals
- ASTM E793-01 Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
- ASTM E793-95 Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
- ASTM E793-06(2018) Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
- ASTM D127-05 Standard Test Method for Drop Melting Point of Petroleum Wax, Including Petrolatum
- ASTM D127-08 Standard Test Method for Drop Melting Point of Petroleum Wax, Including Petrolatum
- ASTM D127-08(2015) Standard Test Method for Drop Melting Point of Petroleum Wax, Including Petrolatum
- ASTM E793-06 Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
- ASTM C1276-94(1999) Standard Test Method for Measuring the Viscosity of Mold Powders Above Their Melting Point Using a Rotational Viscometer
- ASTM D5399-95(2000) Standard Test Method for Boiling Point Distribution of Hydrocarbon Solvents by Gas Chromatography
- ASTM D5399-04(2009) Standard Test Method for Boiling Point Distribution of Hydrocarbon Solvents by Gas Chromatography
- ASTM E1941-98 Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys
- ASTM E1941-04 Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys
- ASTM E793-06(2012) Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
- ASTM C1276-94(2005) Standard Test Method for Measuring the Viscosity of Mold Powders Above Their Melting Point Using a Rotational Viscometer
- ASTM B618/B618M-07 Standard Specification for Aluminum-Alloy Investment Castings
- ASTM B403-02 Standard Specification for Magnesium-Alloy Investment Castings
- ASTM B403-96 Standard Specification for Magnesium-Alloy Investment Castings
- ASTM A197/A197M-00(2006) Standard Specification for Cupola Malleable Iron
- ASTM B618-03 Standard Specification for Aluminum-Alloy Investment Castings
- ASTM B618-06 Standard Specification for Aluminum-Alloy Investment Castings
- ASTM B618-02e1 Standard Specification for Aluminum-Alloy Investment Castings
- ASTM E390-01 Standard Reference Radiographs for Steel Fusion Welds
- ASTM E390-20 Standard Reference Radiographs for Steel Fusion Welds
- ASTM B618/B618M-08 Standard Specification for Aluminum-Alloy Investment Castings
- ASTM D4884-09e1 Standard Test Method for Strength of Sewn or Thermally Bonded Seams of Geotextiles
- ASTM D3887-96(2004) Standard Specification for Tolerances for Knitted Fabrics
- ASTM D3887-96 Standard Specification for Tolerances for Knitted Fabrics
- ASTM D3887-96(2008) Standard Specification for Tolerances for Knitted Fabrics
- ASTM A997-98 Standard Practice for Investment Castings, Surface Acceptance Standards, Visual Examination
- ASTM A997-98(2003) Standard Practice for Investment Castings, Surface Acceptance Standards, Visual Examination
- ASTM A997-98(2003)e1 Standard Practice for Investment Castings, Surface Acceptance Standards, Visual Examination
- ASTM A997-08(2018) Standard Practice for Investment Castings, Surface Acceptance Standards, Visual Examination
- ASTM D3418-21 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
- ASTM D3418-12e1 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
- ASTM D3418-12 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
- ASTM C1223-09 Standard Test Method for Testing of Glass Exudation from AZS Fusion-Cast Refractories
- ASTM F985-18(2023) Standard Specification for Pilot Platform
- ASTM C1547-02 Standard Classification for Fusion-Cast Refractory Blocks and Shapes
- ASTM B403-07 Standard Specification for Magnesium-Alloy Investment Castings
- ASTM A972/A972M-00(2004) Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles
- ASTM B403-12 Standard Specification for Magnesium-Alloy Investment Castings
- ASTM B618/B618M-14 Standard Specification for Aluminum-Alloy Investment Castings
- ASTM B618/B618M-10 Standard Specification for Aluminum-Alloy Investment Castings
- ASTM B618/B618M-11 Standard Specification for Aluminum-Alloy Investment Castings
- ASTM B618/B618M-11a Standard Specification for Aluminum-Alloy Investment Castings
- ASTM A197/A197M-00(2015) Standard Specification for Cupola Malleable Iron
- ASTM C5-79(1997) Standard Specification for Quicklime for Structural Purposes
- ASTM C5-03(2009) Standard Specification for Quicklime for Structural Purposes
- ASTM C598-93(1998) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
- ASTM C598-93(2019) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
- ASTM E967-03 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
- ASTM E967-08 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
- ASTM E967-18 Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
- ASTM D2244-23 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
- ASTM C1547-02(2018) Standard Classification for Fusion-Cast Refractory Blocks and Shapes
- ASTM C1547-02(2007) Standard Classification for Fusion-Cast Refractory Blocks and Shapes
- ASTM B474-03 Standard Specification for Electric Fusion Welded Nickel and Nickel Alloy Pipe
- ASTM A972/A972M-00 Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles
- ASTM D8091-21 Standard Guide for Impregnation of Graphite with Molten Salt
- ASTM A972/A972M-00(2021) Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles
- ASTM C1547-02(2022) Standard Classification for Fusion-Cast Refractory Blocks and Shapes
- ASTM D8091-16 Standard Guide for Impregnation of Graphite with Molten Salt
- ASTM C1547-02(2013) Standard Classification for Fusion-Cast Refractory Blocks and Shapes
- ASTM D2644-02(2007) Standard Tolerances for Yarns Spun on the Woolen System
- ASTM D2911-94 Standard Specification for Dimensions and Tolerances for Plastic Bottles
- ASTM D2644-81(1996)e1 Standard Tolerances for Yarns Spun on the Woolen System
- ASTM D2644-02 Standard Tolerances for Yarns Spun on the Woolen System
- ASTM D2644-12 Standard Tolerances for Yarns Spun on the Woolen System
- ASTM E2164-08 Standard Test Method for Directional Difference Test
- ASTM D4695-03(2015) Standard Guide for General Pavement Deflection Measurements
- ASTM D4695-03(2020) Standard Guide for General Pavement Deflection Measurements
- ASTM D2644-12(2018) Standard Tolerances for Yarns Spun on the Woolen System
- ASTM D2911/D2911M-16(2023) Standard Specification for Dimensions and Tolerances for Plastic Bottles
- ASTM E967-08(2014) Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
- ASTM E2862-18 Standard Practice for Probability of Detection Analysis for Hit/Miss Data
- ASTM D2244-09a Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
- ASTM D2244-93(2000) Standard Test Method for Calculation of Color Differences From Instrumentally Measured Color Coordinates
- ASTM D2244-21 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
- ASTM D2244-22 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
- ASTM D2244-15e1 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
- ASTM D2244-07e1 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
- ASTM D2244-09 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
- ASTM A997-08 Standard Practice for Investment Castings, Surface Acceptance Standards, Visual Examination
- ASTM A997/A997M-23 Standard Practice for Investment Castings, Surface Acceptance Standards, Visual Examination
- ASTM A997-08(2012) Standard Practice for Investment Castings, Surface Acceptance Standards, Visual Examination
- ASTM D4499-95(2000) Standard Test Method for Heat Stability of Hot-Melt Adhesives
- ASTM E1648-95 Standard Reference Radiographs for Examination of Aluminum Fusion Welds
- ASTM B628-98(2004) Standard Specification for Silver-Copper Eutectic Electrical Contact Alloy
- ASTM E390-95 Standard Reference Radiographs for Steel Fusion Welds
- ASTM E390-01(2006)e1 Standard Reference Radiographs for Steel Fusion Welds
- ASTM D449-89(1999)e1 Standard Specification for Asphalt Used in Dampproofing and Waterproofing
- ASTM B628-98(2010) Standard Specification for Silver-Copper Eutectic Electrical Contact Alloy
- ASTM F3091/F3091M-14(2021) Standard Specification for Powder Bed Fusion of Plastic Materials
- ASTM E1648-20 Standard Reference Radiographs for Examination of Aluminum Fusion Welds
- ASTM E390-15 Standard Reference Radiographs for Steel Fusion Welds
- ASTM F3091/F3091M-14 Standard Specification for Powder Bed Fusion of Plastic Materials
- ASTM B474/B474M-19 Standard Specification for Electric Fusion Welded Nickel and Nickel Alloy Pipe
- ASTM D5853-95 Standard Test Method for Pour Point of Crude Oils
- ASTM D5853-95(2000)e1 Standard Test Method for Pour Point of Crude Oils
- ASTM D5853-16 Standard Test Method for Pour Point of Crude Oils
- ASTM E3020-22 Standard Practice for Ignition Sources
- ASTM E3020-15 Standard Practice for Ignition Sources
- ASTM E3020-16 Standard Practice for Ignition Sources
- ASTM E3020-16a Standard Practice for Ignition Sources
- ASTM D5853-17 Standard Test Method for Pour Point of Crude Oils
- ASTM D3954-15(2022) Standard Test Method for Dropping Point of Waxes
- ASTM D5853-17a Standard Test Method for Pour Point of Crude Oils
- ASTM D2244-07 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
- ASTM D2244-09b Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
- ASTM D2244-11 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
- ASTM A997-07 Standard Practice for Investment Castings, Surface Acceptance Standards, Visual Examination
- ASTM D3104-99(2010) Standard Test Method for Softening Point of Pitches (Mettler Softening Point Method)
- ASTM D3104-14 Standard Test Method for Softening Point of Pitches 40;Mettler Softening Point Method41;
- ASTM D2911-94(2005) Standard Specification for Dimensions and Tolerances for Plastic Bottles
- ASTM D2911-94(2001) Standard Specification for Dimensions and Tolerances for Plastic Bottles
- ASTM E2164-01(2007) Standard Test Method for Directional Difference Test
- ASTM E2164-16 Standard Test Method for Directional Difference Test
- ASTM D2911/D2911M-16 Standard Specification for Dimensions and Tolerances for Plastic Bottles
- ASTM D1857-04 Standard Test Method for Fusibility of Coal and Coke Ash
- ASTM A672-06 Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures
- ASTM C874-99 Standard Practice for Rotary Slag Testing of Refractory Materials
- ASTM A672-96 Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures
- ASTM A672-96(2001) Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures
- ASTM C874-99(2004) Standard Practice for Rotary Slag Testing of Refractory Materials
- ASTM B474-03(2009) Standard Specification for Electric Fusion Welded Nickel and Nickel Alloy Pipe
- ASTM C874-11 Standard Practice for Rotary Slag Testing of Refractory Materials
- ASTM A672-08 Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures
- ASTM C874-99(2009) Standard Practice for Rotary Slag Testing of Refractory Materials
- ASTM B92/B92M-11 Standard Specification for Unalloyed Magnesium Ingot and Stick For Remelting
- ASTM B898-11 Standard Specification for Reactive and Refractory Metal Clad Plate
- ASTM D1994-95(2000) Standard Test Method for Determination of Acid Numbers of Hot-Melt Adhesives
- ASTM A672-96(2005) Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures
- ASTM A672/A672M-19 Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures
- ASTM F2206-19 Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE)
- ASTM B474/B474M-15 Standard Specification for Electric Fusion Welded Nickel and Nickel Alloy Pipe
- ASTM D1857/D1857M-16 Standard Test Method for Fusibility of Coal and Coke Ash
- ASTM D1857/D1857M-17a Standard Test Method for Fusibility of Coal and Coke Ash
- ASTM D1857/D1857M-17 Standard Test Method for Fusibility of Coal and Coke Ash
- ASTM F1056-04(2011) Standard Specification for Socket Fusion Tools for Use in Socket Fusion Joining Polyethylene Pipe or Tubing and Fittings
- ASTM E3040-15 Standard Test Method for Evaluation of Instrumental Color Difference with a Gray Scale
- ASTM D2616-12 Standard Test Method for Evaluation of Visual Color Difference With a Gray Scale
- ASTM D6250-98 Standard Practice for Derivation of Decision Point and Confidence Limit for Statistical Testing of Mean Concentration in Waste Management Decisions
- ASTM D6250-98(2003) Standard Practice for Derivation of Decision Point and Confidence Limit for Statistical Testing of Mean Concentration in Waste Management Decisions
- ASTM D6250-98(2009) Standard Practice for Derivation of Decision Point and Confidence Limit for Statistical Testing of Mean Concentration in Waste Management Decisions
- ASTM D92-02 Standard Test Method for Flash and Fire Points by Cleveland Open Cup
- ASTM D92-92 Standard Test Method for Flash and Fire Points by Cleveland Open Cup
- ASTM D7346-14 Standard Test Method for No Flow Point and Pour Point of Petroleum Products
- ASTM D3104-14a Standard Test Method for Softening Point of Pitches (Mettler Softening Point Method)
- ASTM D1465-10 Standard Test Method for Blocking and Picking Points of Petroleum Wax
- ASTM D852-00 Standard Test Method for Solidification Point of Benzene
- ASTM D852-00e1 Standard Test Method for Solidification Point of Benzene
- ASTM D3954-94(1999) Standard Test Method for Dropping Point of Waxes
- ASTM D3954-94(2004) Standard Test Method for Dropping Point of Waxes
- ASTM B540-97(2002) Standard Specification for Palladium Electrical Contact Alloy
- ASTM D5853-06 Standard Test Method for Pour Point of Crude Oils
- ASTM B684-97(2002) Standard Specification for Platinum-Iridium Electrical Contact Materials
- ASTM D852-02 Standard Test Method for Solidification Point of Benzene
- ASTM E1750-95 Standard Guide for Use of Water Triple Point Cells
- ASTM D852-08 Standard Test Method for Solidification Point of Benzene
- ASTM B702-93(2010) Standard Specification for Copper-Tungsten Electrical Contact Material
- ASTM D97-87e1 Standard Test Method for Pour Point of Petroleum Oils
- ASTM B540-97(2012) Standard Specification for Palladium Electrical Contact Alloy
- ASTM D852-20 Standard Test Method for Solidification Point of Benzene
- ASTM E1750-02 Standard Guide for Use of Water Triple Point Cells
- ASTM E1750-09 Standard Guide for Use of Water Triple Point Cells
- ASTM E1750-10 Standard Guide for Use of Water Triple Point Cells
- ASTM D3954-15 Standard Test Method for Dropping Point of Waxes
- ASTM D852-13 Standard Test Method for Solidification Point of Benzene
- ASTM D852-16 Standard Test Method for Solidification Point of Benzene
- ASTM D5853-09 Standard Test Method for Pour Point of Crude Oils
- ASTM D5853-11 Standard Test Method for Pour Point of Crude Oils
Group Standards of the People's Republic of China, Melting point standard deviation
- T/SBX 026-2019 Determination of Melting Point of Liquid Crystal Monomer by Differential Scanning Calorimetry
- T/ZS 0096-2019 Standards for visits and inspections of key personnel and key places
- T/SCQA 211-2021 Standard for urban road level difference planning and design
- T/CDHA 505-2022 Technical standard for electric heating molten salt energy storage thermal station
- T/JSSCYXH 03-2021 Evaluation Standard of Diancha Skill Level
- T/ZS 0015-2018 Public health standardization pilot standard implementation inspection specification
- T/CAS 554-2021 Reference checklists & key points for standard review
- T/JX 023-2020 Standardized Pilot Consulting Service Specifications
- T/DMLY 01-2018 Standards for establishing industrial tourism demonstration sites
Professional Standard - Medicine, Melting point standard deviation
- YY/T 0815-2010 Standard test method for measurement of enthalpy of fusion, percent crystallinity ，and melting point of ultra-high-molecular weight polyethylene by means of differential scanning calorimetry
Aerospace Industries Association/ANSI Aerospace Standards, Melting point standard deviation
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Melting point standard deviation
- GB/T 28724-2012 Determination of melting temperature for chemicals(pharmaceuticals).Differential scanning calorimetry(DSC)
- GB 1800-1979 Tolerance and fitting,generalities,standard tolerances and basic deviations
- GB 7099-1998 Hygienic standard for pastry and bread
- GB 7099-2003 Hygienic standard for pastry and bread
- GB/T 1800.4-1999 Limits and fits Tables of standard tolerance grades and limit deviations for holes and shafts
- GB/T 32318-2015(英文版) Criteria of bank branches service evaluation
- GB/T 5009.56-2003 Method for analysis of hygienic standard of pastry
- GB/T 1800.3-1998 Limits and fits--Bases--Part 3: Numerical values tables of standard toleranes and fundamental deviations
GM North America, Melting point standard deviation
Underwriters Laboratories (UL), Melting point standard deviation
National Metrological Technical Specifications of the People's Republic of China, Melting point standard deviation
- JJF 1926-2021 Calibration Specification for Thermocouples at Palladium Melting Point by Wire-Bridge Method
Korean Agency for Technology and Standards (KATS), Melting point standard deviation
- KS D 9524-1996(2001) RECOMMENDED PRACTICE FOR HOT DIP ALUMINIZED COATINGS ON FERROURS PRODUCTS
- KS K 0046-2012 Standard tolerances for yarns spun on the cotton or worsted systems
- KS K 0042-2017 Standard tolerances for knit goods
- KS K 0042-1975 Standard tolerances for knit goods
- KS K 0046-1976 Standard tolerances for yarns spun on the cotton or worsted systems
- KS A 3254-1969(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION UNKNOWN, ONE-SIDED)
- KS A 3254-1987 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION UNKNOWN, ONE-SIDED)
- KS A 3252-2002 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION KNOWN, ONE-SIDED)
- KS A 3255-1969(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION UNKNOWN, TWO-SIDED)
- KS A 3255-1987 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION UNKNOWN, TWO-SIDED)
- KS A 3252-1985 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION KNOWN, ONE-SIDED)
- KS K 0042-2011 Standard tolerances for knit goods
- KS A 3252-1968(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION KNOWN, ONE-SIDED)
- KS A 3253-1969(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION KNOWN, TWO-SIDED)
- KS A 3253-2002 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION KNOWN, TWO-SIDED)
- KS A 3254-2002 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION UNKNOWN, ONE-SIDED)
- KS A 3255-2002 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION UNKNOWN, TWO-SIDED)
- KS K 0042-2022 Standard specification for tolerances for knitted fabrics
- KS K 0044-2022 Standard tolerances for yarn spun on the woolen system
- KS K 0044-1986 Standard tolerances for yarn spun on the woolen system
- KS K 0040-2019 Standard tolerances for manufactured organic-base man-made filament single yarns
- KS K 0040-1975 Standard tolerances for manufactured organic-base man-made filament single yarns
- KS X ISO/IEC 6709:2011 Standard representation of geographic point location by coordinates
- KS K 0044-2016 Standard tolerances for yarn spun on the woolen system
- KS K 0044-2011 Standard tolerances for yarn spun on the woolen system
- KS K 0040-2011 Standard tolerances for manufactured organic-base man-made filament single yarns
- KS K 0044-2016(2021) Standard tolerances for yarn spun on the woolen system
- KS A 3262-1969(2001) INTERVAL ESTIMATION OF THE DIFFERENCE BETWEEN TWO POPULATION MEANS(STANDARD DEVIATIONS UNKNOWN)
- KS X ISO 6709:2011 Standard representation of geographic point location by coordinates
- KS A 3262-2002 INTERVAL ESTIMATION OF THE DIFFERENCE BETWEEN TWO POPULATION MEANS(STANDARD DEVIATIONS UNKNOWN)
- KS A 3262-1986 INTERVAL ESTIMATION OF THE DIFFERENCE BETWEEN TWO POPULATION MEANS(STANDARD DEVIATIONS UNKNOWN)
- KS A 3256-2002 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEANS (STANDARD DEVIATIONS KNOWN, ONE-SIDED)
- KS A 3259-2002 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEANS (STANDARD DEVIATIONS UNKNOWN, TWO-SIDED)
- KS A 3263-2002 INTERVAL ESTIMATION OF THE DIFFERENCE BETWEEN TWO POPULATION MEANS(STANDARD DEIVATIONS UNKNOWN)
- KS A 3259-1969(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEANS (STANDARD DEVIATIONS UNKNOWN, TWO-SIDED)
- KS Q 0001-2010 Single sampling inspection plans by variables having desired operating characteristics(known standard deviation)
- KS Q 0001-2013 Single sampling inspection plans by variables and attributes
- KS B 0213-1974 Limits and Tolerances for Unified Coarse Screw Threads
- KS B 0216-1974 Limits and Tolerances for Unified Fine Screw Threads
- KS B 0507-1975(2011) Roughness Comparison Specimens
- KS K 0045-2007 Standard tolerances for tire cords made from man-made fibers
- KS K 0045-1982 Standard tolerances for tire cords made from man-made fibers
- KS A 3258-1991(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE TWO POPULATION MEANS(STANDARD DEVIATIONS UNKNOWN, ONE-SIDED)
- KS M ISO 10093:2019 Plastics — Fire tests — Standard ignition sources
British Standards Institution (BSI), Melting point standard deviation
- BS ISO 17258:2015 Statistical methods. Six Sigma. Basic criteria underlying benchmarking for Six Sigma in organisations
- BS EN 15904:2010 Glass packaging. Standard tolerances for flaconnage
- BS ISO 9058:2008 Glass containers - Standard tolerances for bottles
- BS ISO 12818:2013 Glass packaging. Standard tolerances for flaconnage
- BS EN ISO 12818:2015 Glass packaging. Standard tolerances for flaconnage
- BS EN ISO 23278:2009 Non-destructive testing of welds - Magnetic particle testing of welds - Acceptance levels
- BS EN ISO 10093:1999 Plastics - Fire tests - Standard ignition sources
- BS HD 60269-2:2013 Low-voltage fuses. Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application). Examples of standardized systems of fuses A to K
American National Standards Institute （ANSI), Melting point standard deviation
Association Francaise de Normalisation, Melting point standard deviation
- NF X06-060:1987 Applications de la statistique - Estimation d'une variance - (d'un écart-type).
- NF H35-213:2011 Glass packaging - Standard tolerances for flaconnage.
- NF H35-213*NF EN ISO 12818:2015 Glass packaging - Standard tolerances for flaconnage
- NF X06-061:1987 Applications de la statistique - Comparaison d'une variance (d'un écart-type) à une valeur donnée
- NF X06-062:1987 Applications de la statistique - Estimation du rapport de deux variances - (deux écarts-types).
- NF L09-551:1979 Reference composition of fluxes used for soft soldering.
- NF EN ISO 12818:2015 Emballages en verre - Tolérances standard pour flaconnage
- CWA 15236:2005 Analysis of standardization requirements and standardization gaps for eProcurement in Europe
- NF X06-063:1987 Applications de la statistique - Comparaison du rapport de deux variances - (deux écarts-types) à une valeur donnée.
- NF Z69-204*NF EN ISO 6709:2010 Standard representation of geographic point location by coordinates.
TH-TISI, Melting point standard deviation
- TIS 527-1984 Standard for miniature fuse: fuse-holders
- TIS 506-1984 Standard for fuses for domestic and similar purposes: fuse-link
- TIS 10-1986 Standard for low.voltage distribution link fuses
- TIS 507-1984 Standard for fuses for domestic and similar purposes: fuse holder
- TIS 807-1988 Standard for ignition coils for automobiles
- TIS 377-1981 Standard for tolerances for bolts, screws, nuts and studs
- TIS 1121-1992 Standard for ethylene vinyl acetate base hot.melt adhesive
Professional Standard - Machinery, Melting point standard deviation
- JB/T 8630-1997 Test method of determining melting heat, melting point and crystallization heat and crystallizing point of electrical insulation materials with differential scanning calorimetric method
- JB/T 8995.1-1999 Tolerances and fits for large-size of large electrical machines and hydraulic turbines.General standard tolerances and fundamental deviations
AENOR, Melting point standard deviation
- UNE 66053:1978 ESTIMATION OF THE VARIANCE OR OF THE STANDARD DEVIATION OF A LOT
- UNE 66055:1982 COMPARISON OF TWO VARIANCES OR TWO STANDARD DEVIATIONS
- UNE 66056:1978 ESTIMATION OF THE RATIO OF TWO VARIANCES OR OF TWO STANDARD DEVIATIONS
- UNE 66054:1978 COMPARISON OF THE VARIANCE OR OF THE STANDARD DEVIATION OF A LOT WITH A GIVEN VALUE
Professional Standard - Agriculture, Melting point standard deviation
VE-FONDONORMA, Melting point standard deviation
HU-MSZT, Melting point standard deviation
Japanese Industrial Standards Committee (JISC), Melting point standard deviation
- JIS Z 9042:1962 Significance test of difference between the population mean and the standard (standard deviation known, one-sided)
- JIS Z 9043:1962 Significance test of difference between the population mean and the standard (standard deviation known, two-sided)
- JIS Z 9044:1962 Significance test of difference between the population mean and the standard (standard deviation unknown, one-sided)
- JIS Z 9045:1962 Significance test of difference between the population mean and the standard (standard deviation unknown, two-sided)
- JIS Z 9046:1965 Significance test of difference between the two population means (standard deviations known, one-sided)
- JIS Z 9047:1979 Significance test of difference between the two population means (standard deviations known, two-sided)
- JIS Z 9048:1979 Significance test of difference between the two population means (standard deviations unknown, one-sided)
- JIS Z 9049:1965 Significance test of difference between the two population means (standard deviations unknown, two-sided)
- JIS B 0401-2:1998 ISO system of limits and fits -- Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts
- JIS Z 9052:1963 Interval estimation of the difference between two population means (standard deviations known)
- JIS Z 9053:1963 Interval estimation of the difference between two population means (standard deviations unknown)
ES-UNE, Melting point standard deviation
International Telecommunication Union (ITU), Melting point standard deviation
BR-ABNT, Melting point standard deviation
U.S. Air Force, Melting point standard deviation
European Committee for Standardization (CEN), Melting point standard deviation
- EN 15904:2010 Glass packaging - Standard tolerances for flaconnage
- EN ISO 6709:2022 Standard representation of geographic point location by coordinates (ISO 6709:2022)
- EN ISO 6709:2009 Standard representation of geographic point location by coordinates (ISO 6709:2008, including Cor 1:2009)
- CWA 15236-2005 Analysis of standardization requirements and standardization gaps for eProcurement in Europe
Society of Automotive Engineers (SAE), Melting point standard deviation
PL-PKN, Melting point standard deviation
SAE - SAE International, Melting point standard deviation
RO-ASRO, Melting point standard deviation
Institute of Electrical and Electronics Engineers (IEEE), Melting point standard deviation
- IEEE Std 754-2008 IEEE Standard for Floating-Point Arithmetic
- IEEE 754-2019 IEEE Standard for Floating-Point Arithmetic
- IEEE Std 754-2019 IEEE Standard for Floating-Point Arithmetic
- IEEE/ANSI C37.47-1981 American National Standard Specifications Distribution Fuse Disconnecting Switches, Fuse Supports, and Current-Limiting Fuses
- ANSI C37.47-1981(R1992) American National Standard Specifications Distribution Fuse Disconnecting Switches, Fuse Supports, and Current-Limiting Fuses
- IEEE Unapproved Draft Std P754_D1.5.0, Oct 2007 IEEE Draft Standard for Floating-Point Arithmetic
- IEEE P754/D2.49, March 2019 IEEE Draft Standard for Floating-Point Arithmetic
- IEEE Unapproved Draft Std P754_D1.8.0, Apr 2008 IEEE Draft Standard for Floating-Point Arithmetic
- IEEE Std P754/D1.2.6 Nov 2006 IEEE Draft Standard for Floating-Point Arithmetic
- IEEE Unapproved Draft Std P754_D1.7.0, Mar 2008.pd IEEE Draft Standard for Floating-Point Arithmetic
- IEEE Unapproved Draft Std P754_D9.0 Apr 2008.pdf IEEE Draft Standard for Floating-Point Arithmetic
- IEEE Unapproved Draft Std P754_D1.6.0, Jan 2008 IEEE Draft Standard for Floating-Point Arithmetic
- IEEE P754/D2.45, January 2019 IEEE Draft Standard for Floating-Point Arithmetic
- IEEE Unapproved Draft Std P754_D1.7.0, Mar 2008.pdf IEEE Draft Standard for Floating-Point Arithmetic
- AIEE No. 25-1936 AIEE Report of Standards for Fuses Above 600 Volts
- IEEE Std C37.46-1981 American National Standard Specifications for Power Fuses and Fuse Disconnecting Switches
- IEEE/ANSI C37.46-1981 American National Standard Specifications for Power Fuses and Fuse Disconnecting Switches
- IEEE P754/D2.50, April 2019 IEEE Approved Draft Standard for Floating-Point Arithmetic
- AIEE No. 25-1941 AIEE Revised Report on Standards for Fuses Above 600 Volts
- IEEE Unapproved Draft Std P754/D1.4.0, Apr 2007 Unapproved IEEE Draft Standard Forfloating-Point Arithmetic
- ANSI/IEEE Std 754-1985 IEEE Standard for Binary Floating-Point Arithmetic
- IEEE/ISO/IEC 60559-2020 ISO/IEC/IEEE International Standard - Floating-point arithmetic
- ISO/IEC 60559:2020(E) IEEE Std 754-2019 ISO/IEC/IEEE International Standard - Floating-point arithmetic
IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Melting point standard deviation
Professional Standard - Aviation, Melting point standard deviation
- HB 5001-1992 Technical Standards for Structural Steel Investment Castings
- HB 5312-1985 Standard for Copper Alloy Investment Castings for Aerospace
Taiwan Provincial Standard of the People's Republic of China, Melting point standard deviation
- CNS 8461-1983 Significance Test of Difference Between the Population Mean and the Standard (Standard Deviation Unknown One - Sided)
- CNS 8462-1983 Significance Test of Difference Between the Population Mean and the Standard (Standard Deviation Unknown ,Two -Sided)
- CNS 8460-1983 Significance Test of Difference Between the Population Mean and the Standard (Standard Deviation Known, Two - Sided)
- CNS 8459-1983 Significance Test of Difference Between the Population Mean and the Standart (Standard Deviation Known ,One - Sided)
- CNS 8550-1983 Significance Test of Differencece Between the Two Population Means(Standard Deviations Known, Two - Sided)
- CNS 8879-1983 Interval Estimation of the Difference Between Two Population Means(Standard Deviations Known)
- CNS 8549-1983 Significance Test of Difference Between the Two Population Means (Standard Deviations, Known, One-Side)
- CNS 8746-1983 Significance Test of Difference Between the Two Population Means (Standard Deviations Unknown, Two-Sided)
- CNS 8745-1983 Significance Test of Difference Between the Two Population Means(Standard Deviations Unknown, One-Sided)
- CNS 8880-1983 Interval Estimation of the Difference Between Two Population Means (Standard Deviations Known)
SE-SIS, Melting point standard deviation
CU-NC, Melting point standard deviation
- NC 16-13-1984 Basic Interchangeability Standards. Bevel and Hypoíd Gear Transmissions. Tolerances
International Organization for Standardization (ISO), Melting point standard deviation
RU-GOST R, Melting point standard deviation
- GOST 8.381-1980 State system for ensuring the uniformity of measurements. Standards. The ways of expressing the errors
- GOST 34038-2016 Glass packaging. Flacons. Standard tolerances from nominal dimensions
BE-NBN, Melting point standard deviation
American Society of Mechanical Engineers (ASME), Melting point standard deviation
- ASME TES-1-2020 Safety Standard for Thermal Energy Storage Systems: Molten Salt
CH-SNV, Melting point standard deviation
- SN 214 051-1984 Testing of metallic materials; hardness fest on welds;Transverse sections of joint weldsGrundlage der vorliegenden Norm ist die Deutsche NormDIN 50163, Teil l (siehe Erl?uterungen).
German Institute for Standardization, Melting point standard deviation
- DIN 7172:1991-04 Tolerances and limit deviations for sizes above 3150 mm up to 10000 mm; principles, standard tolerances and limit deviations
- DIN EN ISO 12818:2015-08 Glass packaging - Standard tolerances for flaconnage (ISO 12818:2013); German version EN ISO 12818:2015
- DIN 7172:1991 Tolerances and limit deviations for sizes above 3150 mm up to 10000 mm; principles, standard tolerances and limit deviations
- DIN ISO 286-2:1990 ISO system of limits and fits; tables of standard tolerance grades and limit deviations for holes and shafts; identical with ISO 286-2:1988
- DIN EN ISO 10093:1999 Plastics - Fire tests - Standard ignition sources (ISO 10093:1998); German version EN ISO 10093:1998
Professional Standard - Electron, Melting point standard deviation
国家市场监督管理总局、中国国家标准化管理委员会, Melting point standard deviation
Danish Standards Foundation, Melting point standard deviation
Lithuanian Standards Office , Melting point standard deviation
Shanghai Provincial Standard of the People's Republic of China, Melting point standard deviation
- DB31/ 69-1992 Copper low-frequency melting furnace operation management standard
ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Melting point standard deviation
- ITU-R F.2113-0-2018 Error performance and availability objectives and requirements for real point-to-point packet-based radio links
Standard Association of Australia （SAA）, Melting point standard deviation
ANSI - American National Standards Institute, Melting point standard deviation
Professional Standard - Military and Civilian Products, Melting point standard deviation
- WJ 1266-1981 Dimensional tolerance of plastic parts (limited standard)
(U.S.) Ford Automotive Standards, Melting point standard deviation
- FORD ESW-M1C168-A-2008 GREASE, INORGANIC - HIGH MELTING POINT - NLGI NO. 2 ***TO BE USED WITH FORD WSS-M99P1111-A***
National Fire Protection Association (NFPA), Melting point standard deviation
- NFPA 86-2015 Standard for Ovens and Furnaces (Effective Date: 5/19/2014)
Professional Standard - Urban Construction, Melting point standard deviation
- CJJ/T 234-2015 Standard for national key parks evaluation
- GB 51324-2019 Fire prevention standards for transitional resettlement sites in disaster areas
Professional Standard - Nuclear Industry, Melting point standard deviation
- EJ/T 656-1999 The kits of γ-ray standard point-source for γ-ray spectrometry
Guangdong Provincial Standard of the People's Republic of China, Melting point standard deviation
Professional Standard - Petrochemical Industry, Melting point standard deviation
- SH/T 0244-1992 Determination of boiling point of standard n-heptane and standard isooctane
International Electrotechnical Commission (IEC), Melting point standard deviation
- IEC 60269-2:2013 Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K
- IEC 60269-2:2016 Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K
IT-UNI, Melting point standard deviation
Professional Standard - Light Industry, Melting point standard deviation
- QB/T 2267-1996 Tolerance and fit dimensions for timing instruments to 18mm insert standard tolerance values for intermediate tolerance classes
Association of German Mechanical Engineers, Melting point standard deviation
American Welding Society (AWS), Melting point standard deviation
- AWS A4.4M-2001 Standard Procedures for Determination of Moisture Content of Welding Fluxes and Welding Electrode Flux Coverings
NL-NEN, Melting point standard deviation
- NEN 2890-1990 Derivation of target sizes from modular sizes of building elements
ECIA - Electronic Components Industry Association, Melting point standard deviation
KR-KS, Melting point standard deviation
Aerospace, Security and Defence Industries Association of Europe (ASD), Melting point standard deviation
- ASD-STAN PREN 4434-2003 Aerospace Series Copper or Copper Alloy Lightweight Conductors for Electrical Cables Product Standard (Normal and tight tolerances) (Edition P 2)