ZH
RU
ES

Plastics and Plastic Products

Plastics and Plastic Products, Total:495 items.

In the international standard classification, Plastics and Plastic Products involves: Wastes, Plastics, Rubber and plastics products, Aircraft and space vehicles in general, Conducting materials, Analytical chemistry, Pipeline components and pipelines, Materials and articles in contact with foodstuffs, Graphical symbols, Hand-held tools, Protection against dangerous goods, Metrology and measurement in general, Spices and condiments. Food additives, Bottles. Pots. Jars, Shipbuilding and marine structures in general, Equipment for the rubber and plastics industries, Cellular materials, Environmental protection, Materials for aerospace construction, Chipless working equipment, Packaging materials and accessories, Company organization and management, Reinforced plastics, Surface treatment and coating, Screw threads, Linear and angular measurements, Rubber, Paint ingredients, Ground service and maintenance equipment, Packaging and distribution of goods in general, Agricultural machines, implements and equipment, Installations in buildings, Vocabularies, Tobacco, tobacco products and related equipment, Protection against fire, Raw materials for rubber and plastics, Fasteners, Equipment for the chemical industry, Plant and equipment for the food industry, Welding, brazing and soldering, Microbiology, Kitchen equipment, Barrels. Drums. Canisters, Characteristics and design of machines, apparatus, equipment, Construction materials, Paints and varnishes.

Danish Standards Foundation, Plastics and Plastic Products

DS/CEN/TS 16011:2013 Plastics - Recycled plastics - Sample preparation
DS/EN 14233:2003 Materials and articles in contact with foodstuffs - Plastics - Temperature at the plastics/food interface - Determination of temperature of plastics and materials and articles at the plastics/food interface during microwave and conventional oven heating i
DS/EN ISO 11469:2000 Plastics - Generic identification and marking of plastics products
DS/CEN/TS 13130-17:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 17: Determination of carbonyl chloride in plastics
DS/EN 13130-4:2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 4: Determination of 1,3-butadiene in plastics
DS/EN 13130-8:2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 8: Determination of isocyanates in plastics
DS/CEN/TS 13130-20:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 20: Determination of epichlorohydrin in plastics
DS/EN 13130-6:2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 6: Determination of vinylidene chloride in plastics
DS/CEN/TR 15353:2007 Plastics - Recycled plastics - Guidelines for the development of standards for recycled plastics
DS/CEN/TS 13130-22:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 22: Determination of ethylene oxide and propylene oxide in plastics
DS/EN 13130-1:2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 1: Guide to test methods for the specific migration of substances from plastics to foods and food simulants and the determination of substances in plastic
DS/EN 14481:2003 Materials and articles in contact with foodstuffs - Plastics - Test methods for the determination of fatty contact
DS/EN 15860:2010 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
DS/EN 1186-12:2002 Materials and articles in contact with foodstuffs - Plastics - Part 12: Test methods for overall migration at low temperatures
DS/EN 1186-13:2002 Materials and articles in contact with foodstuffs - Plastics - Part 13: Test methods for overall migration at high temperatures

Association Francaise de Normalisation, Plastics and Plastic Products

XP T50-810*XP CEN/TS 16011:2013 Plastics - Recycled plastics - Sample preparation
XP CEN/TS 16011:2013 Plastiques - Plastiques recyclés - Préparation des échantillons
NF T51-080:1999 Plastics. Measurement of resistivity of conductive plastics.
NF T54-002:1981 Plastics. Thermoplastics parts of piping. Definitions. Dimensions.
NF T50-060:2000 Plastics - Generic identification and marking of plastics products.
NF T53-035:1981 Plastics. Amorphous thermoplastic moulding materials. Determination of post-shrinkage of test specimens.
NF T50-060*NF EN ISO 11469:2016 Plastics - Generic identification and marking of plastics products
NF EN ISO 11469:2016 Plastiques - Identification générique et marquage des produits en matière plastique
XP D25-201-17*XP CEN/TS 13130-17:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 17 : determination of carbonyl chloride in plastics
NF T51-018:1981 Plastics. Modulus of longitudinal elasticity of rigid plastics.
XP CEN/TS 13130-17:2005 Matériaux et objets en contact avec les denrées alimentaires - Substances dans les matières plastiques soumises à des limitations - Partie 17 : détermination du chlorure de carbonyle dans les matières plastiques
NF T51-799*NF EN 17228:2019 Plastics - Bio-based polymers, plastics, and plastic products - Terminology, characteristics and communication
NF T54-422:2003 Plastics - Mulching thermoplastic films for use in agriculture and horticulture.
NF T54-022:1980 Plastics. Thermoplastic pipes and fittings. Determination of specific gravity.
XP D25-201-20*XP CEN/TS 13130-20:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 20 : determination of epichlorohydrin in plastics
NF EN 13130-4:2004 Matériaux et objets en contact avec les denrées alimentaires - Substances dans les matières plastiques soumises à des limitations - Partie 4 : détermination du 1,3-butadiène dans les matières plastiques
NF EN 13130-8:2004 Matériaux et objets en contact avec les denrées alimentaires - Substances dans les matières plastiques soumises à des limitations - Partie 8 : détermination des isocyanates dans les matières plastiques
NF T51-809*NF EN ISO 10210:2017 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials
NF EN ISO 10210:2017 Plastiques - Méthodes de préparation des échantillons pour les essais de biodégradation des matériaux plastiques
NF EN 13130-6:2004 Matériaux et objets en contact avec les denrées alimentaires - Substances dans les matières plastiques soumises à des limitations - Partie 6 : détermination du chlorure de vinylidène dans les matières plastiques
NF D25-201-8*NF EN 13130-8:2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 8 : determination of isocyanates in plastics
NF T51-067:1983 Plastics. Optical properties.
NF D25-201-6*NF EN 13130-6:2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 6 : determination of vinylidene chloride in plastics.
NF D25-201-4*NF EN 13130-4:2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 4 : determination of 1,3-butadiene in plastics
NF T51-025:1999 Plastics. Determination of migration of plasticizers.
NF T56-200:1988 Plastics. Rigid cellular materials in the form of sheets. Specification plan.
XP D25-201-22*XP CEN/TS 13130-22:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 22 : determination of ethylene oxide and propylene oxide in plastics
NF T51-012:1957 Plastics. Determination of bulk factor of moulding materials.
NF T54-504:1976 Light plastics products. Bending test.
NF T52-117:1985 Plastics. Base materials for polyurethanes. Polyethers. Determining of the cloud point.
NF T51-021:1997 Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST).
NF T54-111:1971 Transparent sheets of polyethylene. Determination of the haze.
NF T50-060:1994 PLASTIC. GENERIC IDENTIFICATION AND MARKING OF PLASTIC PRODUCTS.
XP CEN/TS 13130-22:2005 Matériaux et objets en contact avec les denrées alimentaires - Substances dans les matières plastiques soumises à des limitations - Partie 22 : détermination des oxydes d'éthylène et de propylène dans les matières plastiques
NF T56-201:1988 Plastics. Rigid cellular materials in the form of expanded polystyrene sheets obtained by casting. Specifications.
NF T57-530:1991 Plastics. Prepregs. Bulk moulding compound (bmc) and dough moulding compound (dmc). Basis for a specification.
NF T52-113:1985 Plastics. Basic materials for polyurethanes. Polyesters. Determination of the hydroxyl value.
NF T58-100:1971 Plastics materials. Surface coating of metals. Plastics coatings.(dry application). Specification.
NF T52-112:1985 Plastics. Basics materiels for polyurethanes. Polyethers. Determination of the hydroxyl value.
NF T51-005-2:1996 Plastics. Determination of temperature of deflection under load. Part 2 : plastics and ebonite.
NF EN 14481:2003 Matériaux et articles en contact avec les denrées alimentaires - Plastiques - Méthodes d'essai pour la détermination d'un contact gras
NF EN 14233:2003 Matériaux et objets en contact avec les denrées alimentaires - Matières plastiques - Détermination de la température des matières plastiques et objets à l'interface matières plastiques/denrées alimentaires lors du chauffage en four classique ...
NF T51-113:1976 Plastics. Determination of the resistance to scratching.
NF T51-115:1982 Plastics. Determination of resistance to abrasion.
NF T51-116-2*NF EN ISO 6603-2:2002 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2 : instrumented puncture test
NF T51-624*NF ISO 9113:1987 Plastics. Polypropylene (pp) and propylene-copolymer thermoplastics. Determination of isotactic index.
NF T54-192:2003 Plastics - Plastics films for agriculture and horticulture - Conditions for installation and use.
NF T52-118:1985 Plastics. Basic materials for polyurethanes. Polyethers. Determining of the conventionnal pH value.
NF T56-203:1988 Plastics. Rigid cellular materials in the form of polyurethane sheets. Specifications.
NF T52-131:1988 Plastics. Basic materials for polyurethane. Determination of the density of isocyanates.
NF T58-001:1997 Plastics. Preparation of test specimens by machining.
NF EN 17228:2019 Plastiques - Polymères, plastiques et produits en plastique biosourcés - Terminologie, caractéristiques et communication
NF T51-116-1*NF EN ISO 6603-1:2000 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1 : non-instrumented impact testing
NF T51-034-2:1996 Plastics. Determination of tensile properties. Part 2 : test conditions for moulding and extrusion plastics.
NF T50-802*NF EN 15343:2008 Plastics - Recycled plastics - Plastics recycling traceability and assessment of conformity and recycled content.
NF T52-114:1985 Plastics. Basic materials for polyrethanes. Determination of the acid index of polyethers.
NF T52-115:1985 Plastics. Basic materials for polyurethanes. Polyethers and polyesters. Determination of water.
NF T52-116:1985 Plastics. Basic materials for polyurethanes. Polyethers. Determination of non saturation level.
NF T52-119:1985 Plastics. Base materials for polyurethanes. Polyethers. Determination the sodium and potassium content.
NF T52-111:1985 Plastics. Basic materials for polyurethanes. Polyethers and polyesters. Determination of the density.
NF T51-165:1980 Plastics. Methods exposure to natural weathering.
NF EN ISO 2818:2019 Plastiques - Préparation des éprouvettes par usinage
NF T51-351:1985 Plastics. Determination of ash. Unplasticized cellulose acetate.
NF T54-411*NF EN 15860:2018 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
NF T51-294-5:2013 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: preparation of standard specimens for investigating anisotropy
NF T51-820:1998 Plastics. Ethylene/vinyl acetate copolymer (EVAC) thermoplastics. Determination of vinyl acetate content.
NF EN ISO 293:2023 Plastiques - Moulage par compression des éprouvettes en matières thermoplastiques
NF T50-050-3:1999 Plastics. Symbols and abbreviated terms. Part 3 : plasticizers.
NF T51-402*NF EN ISO 7808:1998 Plastics. Thermosetting moulding materials. Determination of transfer flow.
NF T53-501*NF EN ISO 3671:1998 Plastics. Aminoplastic moulding materials. Determination of volatile matter.
NF T51-150*NF EN 1122:2001 Plastics - Determination of cadmium - Wet decomposition method
NF T51-180:1986 Plastics. Cyclical exposure. Definition of terms.
NF T51-022:1997 Plastics. Evaluation of the action of microorganisms.
NF T54-503:1976 Light plastics products. Determination of tensile properties.
NF T54-505:1976 Light plastics products. Impact resistance test.
NF T54-072:1981 Polyethylene pipes "5". Specifications.
NF T51-055:1980 Plastics. Method of exposure under glass to daylight.
NF T51-068:1983 Plastics. Determination of transparency of a testpiece.
NF T51-294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4 : determination of moulding shrinkage.
NF T54-033:1980 Plastics. Unplasticized PVC fittings. Determination of water absorption.
NF T53-010:1992 PLASTICS. PHENOLIC MOULDING MATERIALS. SPECIFICATION.
NF T51-063:1971 Methods for determining the density and relative density (specific gravity) of plastics excluding cellular plastics.
NF EN ISO 15252-2:2000 Plastiques - Poudres à mouler à base d'époxydes (EP-PMC) - Partie 2 : préparation des éprouvettes et détermination des propriétés
NF EN ISO 14526-2:2000 Plastiques - Poudres à mouler phénoliques (PF-PMC) - Partie 2 : préparation des éprouvettes et détermination des propriétés
NF T30-708:1983 Paints. Thick plastics coatings. Preparation of test pieces. Application of products.
NF T51-433*NF EN ISO 8975:1995 Plastics. Phenolic resins. Determination of ph.
NF T51-527:1985 Plastics. Epoxies. Determination of properties.
NF T51-111:1997 Plastics. Determination of tensile-impact strength.

European Committee for Standardization (CEN), Plastics and Plastic Products

PD CEN/TS 16011:2013 Plastics - Recycled plastics - Sample preparation
DD ENV 13130-8-1999 Materials and Articles in Contact with Foodstuffs - Plastics Substances Subject to Limitation - Part 8: Determination of Isocyanates in Plastics
EN ISO 2898-2:1999 Plastics - Plasticized Poly(Vinyl Chloride) (PVC-P) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties ISO 2898-2:1997
EN ISO 2898-2:2008 Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2898-2:2008)
EN ISO 1163-2:1999 Plastics - Unplasticized Poly(Vinyl Chloride) (PVC-U) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties
prEN 23994-1992 Plastic products; hose of polymer reinforced thermoplastics for suction and discharge (ISO 3994:1977)
EN ISO 10210:2017 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials
EN 15343:2007 Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled content
EN ISO 527-2:2012 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)
EN ISO 2898-1:2000 Plastics - Plasticized Poly(Vinyl Chloride) (PVC-P) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications
EN ISO 294-5:2017 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
EN ISO 294-5:2013 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
EN ISO 11469:2016 Plastics - Generic identification and marking of plastics products
EN ISO 294-3:2020 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020)
EN ISO 294-3:1998 Plastics - Injection Moulding of Test Specimens of Thermoplastic Materials - Part 3: Small Plates ISO 294-3:1996
EN ISO 294-3:2003 Plastics - Injection Moulding of Test Specimens of Thermoplastic Materials - Part 3: Small Plates ISO 294-3: 2002
EN ISO 1163-1:1999 Plastics - Unplasticized Poly(Vinyl Chloride) (PVC-U) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications ISO 1163-1:1995
PD CEN/TS 13130-17:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 17: Determination of carbonyl chloride in plastics
EN ISO 11469:2000 Plastics - Generic Identification and Marking of Plastics Products ISO 11469:2000
DD ENV 1186-13-1999 Materials and Articles in Contact with Foodstuffs - Plastics - Part 13: Test Method for Overall Migration at High Temperatures

AENOR, Plastics and Plastic Products

UNE-CEN/TS 16011:2015 EX Plastics - Recycled plastics - Sample preparation
UNE-CEN/TS 13130-17:2006 EX Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 17: Determination of carbonyl chloride in plastics
UNE-EN 13130-8:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 8: Determination of isocyanates in plastics
UNE-EN 13130-4:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 4: Determination of 1,3-butadiene in plastics
UNE-EN 13130-6:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 6: Determination of vinylidene chloride in plastics
UNE-CEN/TS 13130-20:2006 EX Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 20: Determination of epichlorohydrin in plastics
UNE-EN 14233:2003 Materials and articles in contact with foodstuffs - Plastics - Determination of temperature of plastics materials and articles at the plastics/food interface during microwave and conventional oven heating in order to select the appropriate temperature for
UNE-CEN/TR 15353:2008 IN Plastics - Recycled plastics - Guidelines for the development of standards for recycled plastics
UNE 53246:1981 PLASTICS. DETERMINATION OF DIMENSION STABILITY OF THERMOPLASTIC MOULDED ARTICLES
UNE-CEN/TS 13130-22:2006 EX Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 22: Determination of ethylene oxide and propylene oxide in plastics
UNE-EN 13130-1:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 1: Guide to test methods for the specific migration of substances from plastics to foods and food simulants and the determination of substances in plastic
UNE-EN 14481:2004 Materials and articles in contact with foodstuffs - Plastics - Test methods for the determination of fatty contact
UNE 53206:2012 Plastics. Large plastic bags made with plastic films. Characteristics and test methods
UNE-EN 15860:2011 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
UNE 53257-1:1988 PLASTICS. SHOPPING PLASTICS BAGS FOR ALIMENTARY USE. REQUIREMENTS AND TEST METHODS

German Institute for Standardization, Plastics and Plastic Products

DIN CEN/TS 16011:2013-04*DIN SPEC 91011:2013-04 Plastics - Recycled plastics - Sample preparation; German version CEN/TS 16011:2013
DIN 7708-1:1980 Plastic Moulding Materials; Plastic Products; Concepts
DIN CEN/TS 13130-17:2005-05 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 17: Determination of carbonyl chloride in plastics; German version CEN/TS 13130-17:2005
DIN 53733:1976 Testing of Plastics; Size Reduction of Plastic Products for Test Purposes
DIN 53733:2021 Testing of plastics - Size reduction of plastic products for test purposes
DIN 53733:2015 Testing of plastics - Size reduction of plastic products for test purposes
DIN EN 13130-4:2004-08 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 4: Determination of 1,3-butadiene in plastics; German version EN 13130-4:2004
DIN EN 13130-8:2004-08 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 8: Determination of isocyanates in plastics; German version EN 13130-8:2004
DIN EN 17228:2019 Plastics - Bio-based polymers, plastics, and plastics products - Terminology, characteristics and communication
DIN EN 17228:2018 Plastics - Bio-based polymers, plastics, and plastic products - Terminology, characteristics and communication; German and English version prEN 17228:2018
DIN EN 17228:2019-06 Plastics - Bio-based polymers, plastics, and plastics products - Terminology, characteristics and communication; German version EN 17228:2019
DIN EN 13130-6:2004-08 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 6: Determination of vinylidene chloride in plastics; German version EN 13130-6:2004
DIN CEN/TS 13130-20:2005-05 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 20: Determination of epichlorohydrin in plastics; German version CEN/TS 13130-20:2005
DIN EN ISO 10210:2018-02 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials (ISO 10210:2012); German version EN ISO 10210:2017
DIN-Fachbericht CEN/TR 15353:2007 Plastics - Recycled plastics - Guidelines for the development of standards relating for recycled plastics; German version CEN/TR 15353:2007
DIN EN 14233:2003-01 Materials and articles in contact with foodstuffs - Plastics - Determination of temperature of plastics materials and articles at the plastics/food interface during microwave and conventional oven heating in order to select the appropriate temperature ...
DIN CEN/TS 16011:2013 Plastics - Recycled plastics - Sample preparation; German version CEN/TS 16011:2013
DIN CEN/TS 13130-22:2005-05 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 22: Determination of ethylene oxide and propylene oxide in plastics; German version CEN/TS 13130-22:2005
DIN EN ISO 1163-2:1999 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1163-2:1995); German version EN ISO 1163-2:1999
DIN 16780-1:1988 Plastic moulding materials; thermoplastic moulding materials of polymeric blends; classification and designation
DIN EN 13130-1:2004-08 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 1: Guide to test methods for the specific migration of substances from plastics to foods and food simulants and the determination of substances in plas...
DIN EN 14481:2003-09 Materials and articles in contact with foodstuffs - Plastics - Test methods for the determination of fatty contact; German version EN 14481:2003
DIN EN ISO 11469:2000 Plastics - Generic identification and marking of plastics products (ISO 11469:2000); German version EN ISO 11469:2000
DIN 16906:2015-01 Testing of plastic sheeting and plastic films - Sample and specimen - Preparation and conditioning
DIN 53499:1974 Testing of plastics; boiling test of moulded articles made of thermosetting moulding materials
DIN EN ISO 1622-2:1999 Plastics - Polystyrene (PS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1622-2:1995); German version EN ISO 1622-2:1999
DIN EN 15343:2008 Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled content; English version of DIN EN 15343:2008-02
DIN EN ISO 527-2:2012 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012); German version EN ISO 527-2:2012
DIN EN 15346:2008 Plastics - Recycled Plastics - Characterisation of poly(vinyl chloride) (PVC) recyclates; English version of DIN EN 15346:2008-02
DIN EN 15860:2018 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
DIN EN ISO 293:2023-06 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023); German version EN ISO 293:2023
DIN 16906:2007 Testing of plastic sheeting and plastic films - Sample and specimen - Preparation and conditioning
DIN 16906:2015 Testing of plastic sheeting and plastic films - Sample and specimen - Preparation and conditioning
DIN 16906:1989 Testing of plastic sheeting and films; sample and specimen preparation and conditioning
DIN EN ISO 2898-1:1999 Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 2898-1:1996); German version EN ISO 2898-1:1999
DIN 10457:1988-02 Apparatus for dairy analysis; sample bottles of plastic for milk
DIN EN 13421:2006-05 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites; German version EN 13421:2005
DIN EN 15534-5:2014-04 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles; German version EN 15534-5:2014 / Note: To be re...
DIN EN 15534-1:2018-02 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products; German version EN 15534-1:2014+A1:...
DIN EN ISO 11469:2017-01 Plastics - Generic identification and marking of plastics products (ISO 11469:2016); German version EN ISO 11469:2016
DIN EN ISO 1163-1:1999 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1163-1:1995); German version EN ISO 1163-1:1999
DIN 34814:1999 Plastic hexagon nuts
DIN EN 1186-2:2020 Materials and articles in contact with foodstuffs - Plastics - Part 2: Test methods for overall migration in vegetable oils; German and English version prEN 1186-2:2020
DIN EN 1186-13:2002-12 Materials and articles in contact with foodstuffs - Plastics - Part 13: Test methods for overall migration at high temperatures; German version EN 1186-13:2002 / Note: To be replaced by DIN EN 1186-13 (2006-11).

International Organization for Standardization (ISO), Plastics and Plastic Products

ISO 23559:2011 Plastics - Film and sheeting - Guidance on the testing of thermoplastic films
ISO 3994:1977 Plastics products; Hose of polymer reinforced thermoplastics for suction and discharge
ISO 10210:2012 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials
ISO 9988-1:1991 Plastics; polyoxymethylene (POM) moulding and extrusion materials; part 1: designation
ISO 8328:1989 Plastics; amorphous thermoplastic moulding materials; determination of maximum reversion
ISO 11469:2000 Plastics - Generic identification and marking of plastics products
ISO 11469:2016 Plastics - Generic identification and marking of plastics products
ISO 11469:1993 Plastics; generic identification and marking of plastic products
ISO 7391-1:1987 Plastics; Polycarbonate moulding and extrusion materials; Part 1 : Designation
ISO 15791-1:2014 Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance
ISO 294-5:2001 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
ISO 294-5:2011 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
ISO 294-5:2017 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
ISO 2818:2018 Plastics — Preparation of test specimens by machining
ISO 294-2:2018 Plastics — Injection moulding of test specimens of thermoplastic materials — Part 2: Small tensile bars
ISO 15791-1:2002 Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance

U.S. Military Regulations and Norms, Plastics and Plastic Products

ARMY MIL-HDBK-700 A-1975 PLASTICS

RO-ASRO, Plastics and Plastic Products

STAS 5874-1983 PLASTICS Determination of flexural propertie? of rigid plastics
STAS 6572/1-1979 Plastics THERMOPLASTICS SPECIMENS MOULDING BY INJECTION General specifications
STAS 6572/2-1979 Plastics THERMOPLASTICS SPECIMENS MOULDING BY COMPRESSION General specifications
STAS 6216-1980 PLASTIGS Determination of loss of plasticizers Activated carbon method
STAS 6127-1987 PLASTICS Tear strength determinatiQn of plastic flexible sheets
STAS 4627-1975 PLASTICS EARMARKS FOR ANIMALS
STAS 6129-1980 PLASTICS Determination of frost brittle point of foils and plates of thermosetting materials
STAS 5870-1973 Plaslics SIEVE ANALYSIS
STAS 6572-1968
STAS 5873-1983 PLASTIC S Determination of compression characteristics
STAS 5794-1980 PLASTICS staudard atnlospheres for conditioning and testing
STAS 7137-1988 PL.ASTICS Determination of rigid plastics flamability by incandoseent rod method
STAS 7136-1984 Plasties PHORMO-PHENOLIC MOULDING MINTURES
STAS 5872-1976 PLASTIC S Determination of temperatura of deflection under load
STAS 5796-1980 PLASTICS Bulk factor calcul of moulding mixtures
STAS 6339-1980 PLASTICS Determination of resistance at chemical agents action
STAS 6175-1980 PLASTICS Determination of Dynstat impact resistance
STAS 5795-1973 Plastics DETERMINATION OF SHRINKAGE OF GOMPRESSION MOULDED TEST SPEGIMENS OF HEATCON- VERTIBLE MATERIALS
STAS 6896-1973 PLASTICS FOR BUILDING PURPO- SES Polyvinyl chloride handrail shape
STAS 6174-1973 PLASTrfiS Determination of therrao-stability by Martens method
STAS 7200-1973 PLASTICS Dotermination of thicknc;,s of films and sheets
STAS 5691-1980 PLASTICS Determinalion of water absorption at boiling

Group Standards of the People's Republic of China, Plastics and Plastic Products

T/CAS 265-2017 Rotomolding product—Plastics inspection chamber
T/JYPA 002-2021 Plastic griddles
T/STSJSH 0001-2017 Daily plastic products
T/QGCML 863-2023 Plastic waste cutting table
T/CPPIA 17-2022 Antibacterial daily plastic products
T/QGCML 878-2023 Plastic product processing device
T/CXSBX 003-2023 Technical Specification for Labeling of Plastic Products Used in Food Contact: Disposable Plastic Tableware
T/NHMJ 4-2019 Guidelines for Design and Manufacture of Plastic Injection Molds
T/GDPIA 36-2021 Guide for the selection of life source plastic products
T/BAEE 013-2022 Specifications for the use of plastics in markets
T/CASME 857-2023 Technical requirements for production of hard plastic products
T/ZZB 1713-2020 Plastics and aluminum foil laminated Seal lidding film for food packaging
T/DLQG 1001-2017 Plastic box for food logistics
T/JZXS 002-2018 Plastic trays and boxes for food

British Standards Institution (BSI), Plastics and Plastic Products

DD ENV 13130-4-1999 Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of 1,3-butadiene in plastics
DD ENV 13130-6-1999 Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of vinylidene chloride in plastics
DD CEN/TS 13130-20:2005 Materials and articles in contact with foodstuffs. Plastics substances subject to limitation - Determination of epichlorohydrin in plastics
BS EN 17228:2019 Plastics. Bio-based polymers, plastics, and plastics products. Terminology, characteristics and communication
BS EN 13130-6:2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Determination of vinylidene chloride in plastics
BS EN ISO 10210:2017 Plastics. Methods for the preparation of samples for biodegradation testing of plastic materials
BS EN ISO 11469:2016 Tracked Changes. Plastics. Generic identification and marking of plastics products
DD CEN/TS 13130-22:2005 Materials and articles in contact with foodstuffs. Plastics substances subject to limitation - Determination of ethylene oxide and propylene oxide in plastics
DD CEN/TS 13130-17:2005 Materials and articles in contact with foodstuffs. Plastics substances subject to limitation - Determination of carbonyl chloride in plastics
BS EN ISO 294-5:2013 Plastics. Injection moulding of test specimens of thermoplastic materials. Preparation of standard specimens for investigating anisotropy
BS EN ISO 7808:1993 Plastics. Thermosetting moulding materials. Determination of transfer flow
BS EN 2561:1995 Carbon fibre reinforced plastics - Undirectional laminates - Tensile test parallel to the fibre direction
BS EN 13130-4:2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Determination of 1,3-butadiene in plastics
BS EN 13130-8:2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Determination of isocyanates in plastics
BS DD CEN/TS 13130-17:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Determination of carbonyl chloride in plastics
BS EN 15343:2007 Plastics - Recycled plastics - Plastics recycling traceability and assessment of conformity and recycled content
BS ISO 294-5:2011 Plastics. Injection moulding of test specimens of thermoplastic materials. Preparation of standard specimens for investigating anisotropy
BS EN ISO 1163-1:2000 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Designation system and basis for specifications
BS EN ISO 1163-1:1996 Plastics. Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials. Designation system and basis for specifications
BS EN ISO 15791-1:2013 Plastics. Development and use of intermediate-scale fire tests for plastics products. General guidance
DD ENV 13130-5-1999 Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of vinylidene chloride in food simulants
22/30449570 DC Plastics. Test specimens
BS EN ISO 24023-2:2020 Plastics. Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 11469:2000 Plastics - Generic identification and marking of plastics products
BS EN 1186-15:2002 Materials and articles in contact with foodstuffs - Plastics - Alternative test methods to migration into fatty food simulants by rapid extraction into iso-octane and/or 95 % ethanol
BS EN ISO 21970-2:2019 Plastics. Polyketone (PK) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN 1186-13:2002 Materials and articles in contact with foodstuffs - Plastics - Test methods for overall migration at high temperatures
BS DD CEN/TS 13130-20:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Determination of epichlorohydrin in plastics
BS EN 15860:2010 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
BS DD CEN/TS 13130-12:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Determination of 1, 3-benzenedimethaneamine in food simulants
BS EN ISO 1872-2:2007 Plastics - Polyethylene (PE) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 1873-2:2007 Plastics - Polypropylene (PP) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 8986-1:1995 Plastics - Polybutene (PB) moulding and extrusion materials - Designation system and basis for specifications
BS EN ISO 7391-1:2006 Plastics - Polycarbonate (PC) moulding and extrusion materials - Designation system and basis for specifications
BS EN ISO 1163-2:2000 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 1163-2:1996 Plastics. Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials. Preparation of test specimens and determination of properties

Standard Association of Australia （SAA）, Plastics and Plastic Products

AS 2070:1999 Plastics materials for food contact use
AS 1886/SUPP 1:1994 Glossary of terms relating to plastics - Plastics recycling terminology (Supplement to AS 1886-1991)
AS/NZS 2906:2001 Fuel containers - Portable-plastic and metal

PL-PKN, Plastics and Plastic Products

PN M59104-1972 Marking abrasive produc?s
PN M59106-1973 Marking abrasiye products
PN BN 6365-01-1965
PN BN 6354-02-1965
PN B89020-1993 Building plastics products. Coating for hand-rails in plastified poly (vinyl chloride)

TR-TSE, Plastics and Plastic Products

TS 785-1969 PLASTICS DETERMINATION OF THE REFRACTIVE INDEX OF TRANSPARENT PLASTICS
TS 1065-1972 COEFFICIENT OF LINEAR THERMAL EXPANSION OF PLASTICS
TS 1096-1972 TEST FOR COMPRESSIVE PROPERTIES OF RIGID PLASTICS
TS 1148-1978 PLASTICS-COMPRESSION MOULDING TEST SPECIMENS OF THERMOPLASTIC MATERIALS

Korean Agency for Technology and Standards (KATS), Plastics and Plastic Products

KS M ISO 11469:2018 Plastics — Generic identification and marking of plastics products
KS M ISO 172-2002(2017) Plastics－Phenol-formaldehyde mouldings－Determination of free ammonia
KS M ISO 172:2022 Plastics — Phenol-formaldehyde mouldings — Detection of free ammonia
KS M ISO 11469:2008 Plastics－Generic identification and marking of plastics products
KS M ISO 12992:2006 Plastics－Vertical flame spread determination for film and sheet
KS B 4151-2002 Main plates for moulds for plastics
KS B 4153-2002(2012) Main plates for moulds for plastics
KS B 4151-1987 Main plates for moulds for plastics
KS B 4153-1987 Main plates for moulds for plastics
KS M ISO 15791-1:2019 Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 1: General guidance

KR-KS, Plastics and Plastic Products

KS M ISO 11469-2018 Plastics — Generic identification and marking of plastics products
KS M ISO 172-2022 Plastics — Phenol-formaldehyde mouldings — Detection of free ammonia
KS M ISO 15791-1-2019 Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 1: General guidance

Japanese Industrial Standards Committee (JISC), Plastics and Plastic Products

JIS Z 7120:2003 Plastics -- Guideline for the application of Mobius loop to plastic products
JIS K 7151:1995 Plastics -- Compression moulding test specimens of thermoplastic materials
JIS K 6999:1994 Plastics -- Generic identification and marking of plastic products
JIS K 6999:2004 Plastics -- Generic identification and marking of plastics products
JIS A 5390:1993 Plastics spacers for precast concrete
JIS K 7171:2008 Plastics -- Determination of flexural properties
JIS K 7171:2016 Plastics -- Determination of flexural properties
JIS K 7171:1994 Plastics -- Determination of flexural properties
JIS K 7181:1994 Plastics -- Determination of compressive properties
JIS K 6937-2:2002 Plastics -- Thermoplastic polyester (TP) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 7364-2:2004 Plastics -- Polyoxymethylene (POM) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 7152:1995 Plastics -- Injection moulding of test specimens of thermoplastic materials
JIS K 7191-2:1996 Plastics -- Determination of temperature of deflection under load -- Part 2: Plastics and ebonite
JIS A 9511:1995 Preformed cellular plastics thermal insulation materials
JIS A 9511:2003 Preformed cellular plastics thermal insulation materials
JIS A 9511:2017 Preformed cellular plastics thermal insulation materials

United States Navy, Plastics and Plastic Products

NAVY MIL-P-8045 B (4)-1999 PLASTIC, SELF-SEALING AND NON-SELF-SEALING TANK BACKING MATERIAL
NAVY MIL-P-8045 B NOTICE 1-1999 PLASTIC, SELF-SEALING AND NON-SELF-SEALING TANK BACKING MATERIAL
NAVY MIL-P-8045 B-1964 PLASTIC, SELF-SEALING AND NON-SELF-SEALING TANK BACKING MATERIAL

Professional Standard - Aviation, Plastics and Plastic Products

HB/Z 5017-1976 Molding process of thermosetting plastic products
HB/Z 317-1998 Injection molding process of thermosetting plastic products
HB/Z 5017-1996 Molding process of thermosetting plastic products
HB 0-84-1984 Specifications for thermosetting plastic molded products
HB/Z 296-1996 Guidance on design and manufacture of plastic injection mold

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Plastics and Plastic Products

GB/T 22236-2008 Testing of plastics.Size reduction of plastic products for test purposes
GB/T 16288-2008 Marking of plastics products
GB/T 5473-2016 Plastics.Phenol formaldehyde mouldings.Detection of free ammonia
GB/T 17037.3-2003 Plastics--Injection moulding of test specimens of thermoplastic materials--Part 3: Small plates
GB/T 16288-1996 Marking for plastic packing products recycling
GB/T 17037.4-2003 Plastic--Injection moulding of test specimens of thermoplastic materials--Part 4: Determination of moulding shrinkage
GB/T 9352-1988 Plastics--Compression moulding test specimens of thermoplastic materials
GB/T 4617-2009 Plastics.Phenolic mouldings.Determination of acetone-soluble matter
GB/T 30768-2014 Paper and plastics laminated films and pouches for food packaging
GB/T 24453-2009 Plastic products used in guestroom of hotel
GB/T 7130-2016 Plastics.Phenol-formaldehyde mouldings.Determination of free phenols.Iodometric method
GB/T 28118-2011 Plastics and aluminum foil laminated films and pouches for food packaging
GB 4806.7-2016 National Food Safety Standard Food Contact Plastic Materials and Products
GB/T 5737-1995 Plastic container for food
GB/T 22271.3-2016 Plastics.Polyoxymethylene(POM) moulding and extrusion materials.Part 3:Requirements for general materials

Lithuanian Standards Office , Plastics and Plastic Products

LST EN 13130-4-2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 4: Determination of 1,3-butadiene in plastics
LST EN 13130-8-2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 8: Determination of isocyanates in plastics
LST EN 13130-6-2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 6: Determination of vinylidene chloride in plastics
LST EN 14233-2003 Materials and articles in contact with foodstuffs - Plastics - Determination of temperature of plastics materials and articles at the plastics/food interface during microwave and conventional oven heating in order to select the appropriate temperature for
LST EN 13130-1-2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 1: Guide to test methods for the specific migration of substances from plastics to foods and food simulants and the determination of substances in plastic
LST EN 14481-2004 Materials and articles in contact with foodstuffs - Plastics - Test methods for the determination of fatty contact
LST EN 15860-2010 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
LST EN ISO 11469:2000 Plastics - Generic identification and marking of plastics products (ISO 11469:2000)
LST EN 1186-12-2002 Materials and articles in contact with foodstuffs - Plastics - Part 12: Test methods for overall migration at low temperatures
LST EN 1186-13-2002 Materials and articles in contact with foodstuffs - Plastics - Part 13: Test methods for overall migration at high temperatures

CEN - European Committee for Standardization, Plastics and Plastic Products

PREN 17228-2018 Plastics - Bio-based polymers@ plastics@ and plastic products - Terminology@ characteristics and communication
EN 17228:2019 Plastics - Bio-based polymers@ plastics@ and plastics products - Terminology@ characteristics and communication
PD CEN/TS 13130-20:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 20: Determination of epichlorohydrin in plastics
PRCEN/TR 15353-2005 Plastics - Recycled plastics - Guidelines for the development of standards for recycled plastics
PD CEN/TS 13130-22:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 22: Determination of ethylene oxide and propylene oxide in plastics

ES-UNE, Plastics and Plastic Products

UNE-EN 17228:2020 Plastics - Bio-based polymers, plastics, and plastics products - Terminology, characteristics and communication
UNE-EN ISO 10210:2018 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials (ISO 10210:2012)
UNE-EN ISO 11469:2017 Plastics - Generic identification and marking of plastics products (ISO 11469:2016)
UNE-EN ISO 294-5:2018 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy (ISO 294-5:2017)
UNE-EN ISO 294-3:2021 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020)
UNE-CEN/TS 17158:2018 Composites made from cellulose based materials and thermoplastics (usually called wood polymer composites (WPC) or natural fibre composites (NFC)) - Determination of particle size of lignocellosic material (Endorsed by Asociación Española de Normaliz...

Shanghai Provincial Standard of the People's Republic of China, Plastics and Plastic Products

DB31/T 478.19-2014 Water quotas for major industrial products and their calculation methods Part 19: Plastic products (plastic particles, plastic products)
DB31/T 1394-2023 Evaluation Guidelines for Green Design of Plastic Products

HU-MSZT, Plastics and Plastic Products

国家市场监督管理总局、中国国家标准化管理委员会, Plastics and Plastic Products

GB/T 40933-2021 Plastics—Film and sheeting—Guidance on the testing of thermoplastic films
GB/T 37866-2019 Green product assessment—Plastic products
GB/T 17037.2-2020 Plastics—Injection moulding of test specimens of thermoplastic materials—Part 2:Small tensile bars
GB/T 41010-2021 Degradability and identification requirements of biodegradable plastics and products
GB/T 17037.5-2020 Plastics—Injection moulding of test specimens of thermoplastic materials—Part 5: Preparation of standard specimens for investigating anisotropy
GB/T 39937-2021 Plastics—Extruded sheets of polypropylene (PP)—Requirements and test methods
GB/T 38787-2020 Plastics—Methods for the preparation of samples for biodegradation testing of plastic materials

Society of Automotive Engineers (SAE), Plastics and Plastic Products

SAE AMS3622-1946 PLASTIC MOLDINGS AND EXTRUSIONS Cellulose Acetate
SAE AMS3617D-1994 Nylon Plastic Moldings and Extrusions
SAE AMS3617A-1976 NYLON PLASTIC MOLDINGS AND EXTRUSIONS
SAE AMS3617B-1984 NYLON PLASTIC MOLDINGS AND EXTRUSIONS
SAE AMS3617C-1991 NYLON PLASTIC MOLDINGS AND EXTRUSIONS
SAE AMS3627A-1977 PLASTIC MOLDINGS AND EXTRUSIONS Methyl Methacrylate, Heat-Resistant
SAE AMS3620-1946 PLASTIC MOLDINGS AND EXTRUSIONS Polystyrene
SAE AMS3620A-1953 PLASTIC MOLDINGS AND EXTRUSIONS Polystyrene
SAE AS33411C-2022 BRACKET, MOUNTING, PLASTIC, FOR USE WITH MS3367 PLASTIC TIEDOWN STRAPS
SAE AS33391C-2022 PLATE, MOUNTING, PLASTIC FOR USE WITH MS3367 PLASTIC TIEDOWN STRAPS
SAE AMS3622A-1954 PLASTIC MOLDINGS AND EXTRUSIONS Cellulose Acetate General Purpose
SAE AMS3624B-1991 PLASTIC MOLDINGS AND EXTRUSIONS, CELLULOSE ACETATE BUTYRATE
SAE AMS3624C-1993 PLASTIC MOLDINGS AND EXTRUSIONS, CELLULOSE ACETATE BUTYRATE
SAE AMS3624A-1953 PLASTIC MOLDINGS AND EXTRUSIONS Cellulose Acetate Butyrate
SAE AMS3624-1946 PLASTIC MOLDINGS AND EXTRUSIONS Cellulose Acetate Butyrate

Indonesia Standards, Plastics and Plastic Products

SNI 19-2946-1992 Plastics bottles for drugs, food and cosmetics
SNI 06-1545-1989 Paste pigment preparation for plastic
SNI 7323-2008 Plastic - Tableware - Polystyrene foam
SNI 06-4209-1996 Plastic - Determination of tensile properties
SNI 12-4927-1998 Plastic food receptacles
SNI 06-1544-1989 Solid pigmen preparation for plastic

Professional Standard-Ships, Plastics and Plastic Products

CB/T 3825-1998 Material classification and code for rubber,plastic and their products

CZ-CSN, Plastics and Plastic Products

CSN ISO 9113:1993 Plastics. Polypropylene (PP) and propylene-copolymer thermoplastics. Determination of izotaciticity index
CSN 64 2013 Z4-2000
CSN 64 2013 Z3-1999
CSN 64 0008-1968 Construction of Plastic Products (Instruc- ions)
CSN 01 4395-1984 Selection tolerances und fits for metric screw parts of plasties
CSN EN 23994-1995 Plastics products.Hose of polymer reinforced thermoplastics for suction and discharge(ISO 3994:1977)
CSN ISO 181:1992 Plastic. Determination of flammability characteristics of plastics in contact with an incandescent rod
CSN 64 2301-1983 Aminoplastic moulding materials Moulding materiál 301
CSN 64 2376-1983 Aminoplastic moulding materíals Moulding materiál 376
CSN 64 0758-1979 Plastics. Determination of hydrogen cyanide in combustion products of plastics
CSN 64 0090-1974 Plaslios products stor;i
CSN 64 0006-1974 Plastics. Tolerances and limit deviations on dimensions of products made of plastics

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Plastics and Plastic Products

GJB 5915-2006 Quality control for military plastics product

Military Standard of the People's Republic of China-General Armament Department, Plastics and Plastic Products

GJB 8772-2015 Quality control of military plastic products

海关总署, Plastics and Plastic Products

SN/T 5408-2022 How to identify recycled plastics and modified plastics

Professional Standard - Machinery, Plastics and Plastic Products

JB/T 3820-2015 Plastics product hydraulic press.Testing of the accuracy
JB/T 3820-1984 Hydraulic press for plastic products Precision
JB/T 6493-1992 Plastic bag making machine
JB/T 53032-1999 Product quality classification of plastic bag making machine

Malaysia Standards, Plastics and Plastic Products

MS 1033-1986

Professional Standard - Environmental Protection, Plastics and Plastic Products

HJBZ 12-1997 Degradable plastic packaging products

Professional Standard - Light Industry, Plastics and Plastic Products

QB/T 6018-2020 Code for design of plastic products plant
QB/T 4919-2016 Plastic cover cap making machine

Association of German Mechanical Engineers, Plastics and Plastic Products

VDI 3822 Blatt 2.1.1-2012 Failure analysis - Defects of thermoplastic products made of plastics caused by faulty design
VDI 3822 Blatt 2.1.8-2012 Failure analysis - Defects of thermoplastic products made of plastics caused by weather-induced stress
VDI 3822 Blatt 2.1.3-2012 Failure analysis - Defects of thermoplastic products made of plastics caused by an unfavourable choice of material and by defects in the material
DVS 2201-1-1988
DVS 2201-1 Beiblatt 1-2003 Testing of semifinished products made of thermoplastics - Basics - Indications; Material and material short cuts

国家质量监督检验检疫总局, Plastics and Plastic Products

SN/T 2822-2011 Determination of the interface temperature between plastic and food during the heating process of exported food contact materials, polymer materials, plastics and products in microwave ovens or traditional furnaces
SN/T 4503-2016 Determination of 2-phenyl-2-propanol in plastics and plastic products by gas chromatography-mass spectrometry

PT-IPQ, Plastics and Plastic Products

NP 2126-1986

TH-TISI, Plastics and Plastic Products

TIS 653-2011 Plastic containers for milk and milk products
TIS 2491-2011 Plastic films for milk and milk products
TIS 1704-1998 Plastics.phenolic moulding materials.specification
TIS 776-2009 Plastic straws for food
TIS 1027-2010 Plastic bags for food

Underwriters Laboratories (UL), Plastics and Plastic Products

UL 2778-2011 Products made from recycled plastic

American National Standards Institute （ANSI), Plastics and Plastic Products

ANSI Z124.7-1997 Prefabricated plastic spa shells

Taiwan Provincial Standard of the People's Republic of China, Plastics and Plastic Products

CNS 6855-1986 Plastics Bucket
CNS 4662-1984 Open Insert Nuts for Plastics Mouldings
CNS 13018-1992 Plastic Flat Pallets
CNS 8544-1989 Plastic Food Receptacles with Lids on Table Use
CNS 9354-1982 Bushes for Plain Bearings, Press Bushes Made From Thermoplastics
CNS 5346-2-2005 Plastics - Symbols and abbreviated terms - Part 3：Plasticizers
CNS 4665-1984 Insert Nuts Heavy Type for Plastics Mouldings and Pressure Die Castings with Dead Hole

SAE - SAE International, Plastics and Plastic Products

SAE AS33391B-2015 PLATE@ MOUNTING@ PLASTIC FOR USE WITH MS3367 PLASTIC TIEDOWN STRAPS
SAE AS33391-2004 PLATE@ MOUNTING@ PLASTIC FOR USE WITH MS3367 PLASTIC TIEDOWN STRAPS
SAE AS33411-2004 BRACKET@ MOUNTING@ PLASTIC FOR USE WITH MS3367 PLASTIC TIEDOWN STRAPS (FSC 5975)

BR-ABNT, Plastics and Plastic Products

RU-GOST R, Plastics and Plastic Products

GOST 12015-1966 Plastics. Preparation of test specimens from thermosetts. General requirements
GOST 12019-1966 Plastics. Preparation of test speciments from thermoplastics. General conditions
GOST 24105-1980 Plastics products. Terms and definitions of defects
GOST 11710-1966 Limits and fits for the parts of plastics

CU-NC, Plastics and Plastic Products

NC 54-315-1985 Construction Materials and Products. Clay Materials Determination of Plasticity and Plastic Water

YU-JUS, Plastics and Plastic Products

JUS Z.M3.035-1990 Packinq. Sacks made from thermoplastic flexible film. Vocabularv and tvpes
JUS Z.C8.021-1980 Plastics. Determination of behaviour ofrigid plastics in contact with an incandescent bar

ANSI - American National Standards Institute, Plastics and Plastic Products

B151.4-1999 Plastic Blown Film Machinery - Manufacture@ Care & Use (SPI)

AT-ON, Plastics and Plastic Products

ONORM EN 23994-1993 Plastics products - Hose of polymer reinforced thermoplastics for suction and discharge (ISO 3994:1977)

Professional Standard - Tobacco, Plastics and Plastic Products

YC/T 235.5-2007 General tolerances- Part 5: Plastic piece made from plastic semi-manufactured goods

Professional Standard - Commodity Inspection, Plastics and Plastic Products

SN/T 3008-2011 Determination of cadmium content in plastics and plastics products for import and export. Wet decomposition method
SN/T 2250-2009 Determination of plasticizers in plastics and plastic articles.Gas Chromatography-mass spectrometry(GC-MS)method
SN/T 2139-2008 Rules for the inspection of plastic products for import and export
SN/T 3095-2012 Identification methods for primary plastic resins and recycled plastic resins
SN/T 2941-2011 Determination of melamine content in plastic raw materials and products

American Society for Testing and Materials (ASTM), Plastics and Plastic Products

ASTM D883-08 Standard Terminology Relating to Plastics
ASTM D883-12 Standard Terminology Relating to Plastics
ASTM D883-11 Standard Terminology Relating to Plastics

Anhui Provincial Standard of the People's Republic of China, Plastics and Plastic Products

DB34/T 2129-2014 Recycled Plastics and Products Standard System

EU/EC - European Union/Commission Legislative Documents, Plastics and Plastic Products

NO 10/2011-2011 COMMISSION REGULATION on plastic materials and articles intended to come into contact with food (Text with EEA relevance)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Plastics and Plastic Products

GB/T 35974.4-2018 Plastics and plastic lining pressure vessels—Part 4: Fabrication, inspection and testing for plastic pressure vessels
GB/T 35974.5-2018 Plastics and plastic lining pressure vessels—Part 5: Fabrication, inspection and testing for pressure vessels with plastic lining

SE-SIS, Plastics and Plastic Products

DE-GPVA, Plastics and Plastic Products

AD 2000-Merkblatt HP120 R-2001 Manufacture and testing of pressure vessels.Construction regulations.Thermoplastic piping

International Federation of Trucks and Engines, Plastics and Plastic Products

NAVISTAR TMS 7045-1982 VOID - Tank, Fuel, Molded Plastic

US-FCR, Plastics and Plastic Products

FCR FED H-08-1 SEC 07440-1982 PREFORMED PLASTIC PANELS

CH-SNV, Plastics and Plastic Products

VSM 34161.2-1972

未注明发布机构, Plastics and Plastic Products

DIN EN ISO 293:2003 Plastics — Compression molding test specimens of thermoplastic materials
BS ISO 4433-2:1997(1999)*BS 2782-11 Method 1161B:1998 Methods of testing plastics : Part 11 : Thermoplastics pipes, fittings and valves, as Method 1161B, for association with related test methods for plastics materials and plastics piping components .

U.S. Air Force, Plastics and Plastic Products

AIR FORCE A-A-50694-1990 CUTTER, TILE, ASPHALT, PLASTIC, RUBBER
AIR FORCE MS24228-1958 KNOB-CONTROL DIAL, PLASTIC

JSAE - Society of Automotive Engineers of Japan@ Inc., Plastics and Plastic Products

JASO M801-1993 Generic identification and marking system of plastics products

Professional Standard - Automobile, Plastics and Plastic Products

QC/T 15-1992 General test method for automotive plastic products

Professional Standard - Agriculture, Plastics and Plastic Products

SN/T 2249-2023 Determination of 34 plasticizers in plastic raw materials and their products by gas chromatography-mass spectrometry
GB 4806.7-2023 National Food Safety Standards Plastic Materials and Products for Food Contact

GM Europe, Plastics and Plastic Products

GME STD 518079-2003 Plastic-coated fabric 8079 Plastic coated knitted fabric laminated with cellular plastic Trik錺last 8079 Trik錬elagd plast laminerad med cellplast English/Swedish

Hunan Provincial Standard of the People's Republic of China, Plastics and Plastic Products

DB43/T 551.2-2014 Recycling Specifications for Waste Plastics Part 2: Recycled Polyethylene Plastics and Recycled Polyethylene Plastics

BE-NBN, Plastics and Plastic Products

NBN B 25-001-1988

SG-SPRING SG, Plastics and Plastic Products

SS 369-2014 Specification for moulded thermoplastic refuse bins

Gansu Provincial Standard of the People's Republic of China, Plastics and Plastic Products

DB62/T 2667-2016 Plastic (PET) Bottles for Food

US-GSA, Plastics and Plastic Products

GSA GG-T-00673-1964 TRIANGLES, DRAFTING, ADJUSTABLE; (PLASTIC)

IL-SII, Plastics and Plastic Products

S.I.333/1-1972 TOOTHBRUSHES MADE OF PLASTOMERS

National Aeronautics and Space Administration (NASA), Plastics and Plastic Products

NASA UFGS-12 34 00-2010 MANUFACTURED PLASTIC CASEWORK

工业和信息化部/国家能源局, Plastics and Plastic Products

JB/T 6493-2015 Plastic film bag making machine

IX-EU/EC, Plastics and Plastic Products

2002/72/EC-2002 COMMISSION DIRECTIVE relating to plastic materials and articles intended to come into contact with foodstuffs