ZH
RU
ES
Pour point meter
Pour point meter, Total:321 items.
In the international standard classification, Pour point meter involves: Shipbuilding and marine structures in general, Petroleum products in general, Crude petroleum, Lubricants, industrial oils and related products, Mining and quarrying, Linear and angular measurements, On-board equipment and instruments, Protection against fire, Tobacco, tobacco products and related equipment, Protection of and in buildings, Waxes, bituminous materials and other petroleum products, Technical drawings, Astronomy. Geodesy. Geography, Pharmaceutics, Road engineering, Industrial automation systems, Thermodynamics and temperature measurements, Equipment for petroleum and natural gas industries, Earthworks. Excavations. Foundation construction. Underground works, Milk and milk products, Equipment for the chemical industry, Soil quality. Pedology, Nuclear energy engineering, Bearings, Mining equipment, Geology. Meteorology. Hydrology, Electricity. Magnetism. Electrical and magnetic measurements, Installations in buildings, Footwear, Mechanical testing, Metrology and measurement in general, Non-destructive testing, Analytical chemistry, Diagnostic, maintenance and test equipment, Electronic tubes, Construction materials, Measurement of force, weight and pressure, Optoelectronics. Laser equipment, Products of the textile industry, Non-textile floor coverings, Fuels, Road vehicles in general, Road vehicle systems.
National Metrological Technical Specifications of the People's Republic of China, Pour point meter
IN-BIS, Pour point meter
German Institute for Standardization, Pour point meter
- DIN 877:1986 Inclination measuring instruments (levels)
- DIN 877:1986-06 Inclination measuring instruments (levels)
- DIN ISO 3016:1982 Petroleum oils; determination of pour point
- DIN EN 16156:2023-08 Cigarettes - Assessment of the ignition propensity - Safety requirement; German and English version prEN 16156:2023 / Note: Date of issue 2023-07-07*Intended as replacement for DIN EN 16156 (2011-02).
- DIN 2276-1:1986-06 Inclination measuring systems; cylindrical spirit level vials; dimensions and requirements
- DIN 4107-3:2011 Geotechnical measurements - Part 3: Inclinometer and deflectometer measurements
- DIN EN ISO 3016:2019-09 Petroleum and related products from natural or synthetic sources - Determination of pour point (ISO 3016:2019); German version EN ISO 3016:2019
- DIN 20450:1988-10 Simple underground track points; 20 m radius, 1 : 5 inclination; geometric dimensions
- DIN 20470:1988-10 Simple underground track points; 50 m radius, 1 : 7 inclination; geometric dimensions
- DIN 20460:1988-10 Simple underground track points; 30 m radius, 1 : 6 inclination; geometric dimensions
- DIN 2276-1:1986 Inclination measuring systems; cylindrical spirit level vials; dimensions and requirements
- DIN EN ISO 3016:2019 Petroleum and related products from natural or synthetic sources - Determination of pour point (ISO 3016:2019)
- DIN 20454:1988-10 Crossings for simple underground track points; 20 m radius, 1 : 5 inclination, 600 mm gauge
- DIN 20474:1988-10 Crossings for simple underground track points; 50 m radius, 1 : 7 inclination, 600 mm gauge
- DIN 20464:1988-10 Crossings for simple underground track points; 30 m radius, 1 : 6 inclination, 600 mm gauge
- DIN 20455:1988-10 Check rail device for simple underground track points; 20 m radius, 1 : 5 inclination, 600 mm gauge
- DIN 20475:1988-10 Check rail device for simple underground track points; 50 m radius, 1 : 7 inclination, 600 mm gauge
- DIN 20465:1988-10 Check rail device for simple underground track points; 30 m radius, 1 : 6 inclination, 600 mm gauge
- DIN EN ISO 3679:2023 Determination of flash point - Method for flash no-flash and flash point by small scale closed cup tester (ISO 3679:2022)
- DIN EN ISO 12863:2011 Standard test method for assessing the ignition propensity of cigarettes (ISO 12863:2010); German version EN ISO 12863:2010
- DIN 20472-1:1988-10 Simple points for underground tracks with loose heel switch; 50 m radius, 1 : 7 inclination, 600 mm gauge; compilation
- DIN 20462-1:1988-10 Simple points for underground tracks with loose heel switch; 30 m radius, 1 : 6 inclination, 600 mm gauge; compilation
- DIN 20452-1:1988-10 Simple points for underground tracks with loose heel switch; 20 m radius, 1 : 5 inclination, 600 mm gauge; compilation
- DIN 2271-2:1976 Pneumatic Length Measurement (Air Gauging); Design Features of Instruments Working in the High Pressure Range
- DIN EN ISO 3679:2023-03 Determination of flash point - Method for flash no-flash and flash point by small scale closed cup tester (ISO 3679:2022); German version EN ISO 3679:2022
- DIN 20472-2:1988-10 Simple points for underground tracks with spring switch blade; 50 m radius, 1 : 7 inclination, 600 mm gauge; compilation
- DIN 20462-2:1988-10 Simple points for underground tracks with spring switch blade; 30 m radius, 1 : 6 inclination, 600 mm gauge; compilation
- DIN 20452-2:1988-10 Simple points for underground tracks with spring switch blade; 20 m radius, 1 : 5 inclination, 600 mm gauge; compilation
CH-SNV, Pour point meter
- VSM 10200-1974
- SN 214 051-1984 Testing of metallic materials; hardness fest on welds;Transverse sections of joint weldsGrundlage der vorliegenden Norm ist die Deutsche NormDIN 50163, Teil l (siehe Erl?uterungen).
- SNV 95831-1949
Professional Standard-Ships, Pour point meter
Professional Standard - Machinery, Pour point meter
- JB/T 9344-1999 Optical clinometer
- JB/T 6177-1992 Melting point determination apparatus
- JB/T 9233.23-1999 General methods of testing the performance of industrial process measurement and control instrments.Drop effect
- JB/T 11944-2014 The technical conditions and test evaluation method for auto pour point tester.automatic air pressure method
Japanese Industrial Standards Committee (JISC), Pour point meter
(U.S.) Ford Automotive Standards, Pour point meter
US-COE, Pour point meter
Korean Agency for Technology and Standards (KATS), Pour point meter
US-FCR, Pour point meter
Professional Standard - Electron, Pour point meter
- SJ 20873-2003 General specifications for inclinometers & horizon-meter
- SJ 20574-1996 General specification for instrument landing system(ILS)marker beacon
National Metrological Verification Regulations of the People's Republic of China, Pour point meter
CEN - European Committee for Standardization, Pour point meter
- EN ISO 3016:2019 Petroleum and related products from natural or synthetic sources - Determination of pour point
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Pour point meter
International Organization for Standardization (ISO), Pour point meter
- ISO 3016:1994 Petroleum products - Determination of pour point
- ISO 3016:1974 Petroleum oils — Determination of pour point
- ISO 12863:2022 Standard test method for assessing the ignition propensity of cigarettes
- ISO 19636:2019 Ships and marine technology — General requirements for inclinometers used for the determination of trim and list of LNG carriers
- ISO 12925-1:2018/Amd 1:2020 Lubricants, industrial oils and related products (class L) — Family C (gears) — Part 1: Specifications for lubricants for enclosed gear systems — Amendment 1: Pour point, according to ISO 3016, of cat
- ISO 3016:2019 Petroleum and related products from natural or synthetic sources — Determination of pour point
- ISO/TS 14934-4:2007 Fire tests - Calibration of heat flux meters - Part 4: Guidance on the use of heat flux meters in fire tests
- ISO 14934-4:2014 Fire tests - Calibration and use of heat flux meters - Part 4: Guidance on the use of heat flux meters in fire tests
- ISO 18674-3:2017 Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 3: Measurement of displacements across a line: Inclinometers
- ISO 3274:1975 Instruments for the measurement of surface roughness by the profile method; Contact (stylus) instruments of consecutive profile transformation; Contact profile meters, system M
国家市场监督管理总局、中国国家标准化管理委员会, Pour point meter
Professional Standard - Petroleum, Pour point meter
- SY/T 7551-2004 crude oil pour point method
- SY/T 5704.2-1995 Maintenance and Calibration Procedures for Formation Dip Logging Tool HDT Formation Dip Logging Tool
- SY/T 5704.1-1995 Formation Dip Logging Tool Maintenance and Calibration Regulations 1016 Formation Dip Logging Tool
- SY/T 5704-2004 Formation Dip Logging Tool Scale
- SY/T 5704-2012 Specification for calibration of formation dipmeter logging tool
- SY 5704-2012 Calibration specification for formation dip logging tool
- SY/T 7516-1992 Determination of Pour Point of Modified Crude Oil by Melting Method
- SY/T 5649-1993 Specifications for petroleum pour point tester
- SY/T 7516-2010 Determination of pour point of modified crude oil.Melting method
- SY/T 7685-2023 land node seismometer
- SY/T 6626-2005 Electronic survey system
- SY/T 6498-2000 Measurement regulations for electronic multi-point inclinometer
- SY/T 6468-2000 Maintenance and inspection for electronic multi-shot survey system
- SY/T 5902-1993 Basic environmental test methods for petroleum exploration and development instruments Test I: Tip-over test
- SY 5624-1993 Measurement regulations for magnetic single and multi-point photographic inclinometers
- SY 5474-1992 Measuring rules for single and multi-point photographic inclinometers with gyroscope
- SY/T 6406-1999 Maintenance and inspection for magnetic single - shot & multi - shot survey instruments
RU-GOST R, Pour point meter
- GOST 32463-2013 Petroleum products. Determination of pour point of automatic tilt method
- GOST 33910-2016 Petroleum products. Determination for pour point. Automatic pressure pulsing method
- GOST 8913-1976 Electrical measuring instruments. Pivots. Technical requirements
- GOST R ISO 5764-2011 Milk. Determination of freezing point. Thermistor cryoscope method (reference method)
- GOST 21107.4-1975 Gas discharge devices. Ignitrons. Methods for measurement of parameters
- GOST 13717-1984 Indicating manometric-action instruments with electric contacts. General specifications
- GOST 22091.9-1986 X-ray devices. The methods of measuring effective focus spot size
- GOST 28261-1989 Motor vehicles. Procedure for determinig the "H" point and the actual seat-back angle for seating positions in motor vehicles
Professional Standard - Energy, Pour point meter
- NB/SH/T 0886-2014 Standard test method for pour point of petroleum products (Automatic tilt method)
Military Standard of the People's Republic of China-General Armament Department, Pour point meter
AT-ON, Pour point meter
KR-KS, Pour point meter
- KS M ISO 3016-2016 Petroleum products — Determination of pour point
- KS V ISO 19636-2023 Ships and marine technology — General requirements for inclinometers used for the determination of trim and list of LNG carriers
- KS M 2110-2018(2023) Testing method for diluted pour point of lubricating oil for aircraft reciprocating engine
- KS M ISO 3016-2021 Petroleum and related products from natural or synthetic sources —Determination of pour point
TH-TISI, Pour point meter
- TIS 1800-1999 Petroleum products.determination of pour point
- TIS 1294-1995 Standard test method for flash point of cutback asphalt with tag open-cup
Lithuanian Standards Office , Pour point meter
AENOR, Pour point meter
- UNE 51106:1980 PETROLEUM PRODUCTS. DETERMINATION OF POUR POINT
- UNE 22542:1992 TESTER AND OHMMETERS FOR ELECTRIC SHOT-FIRING CIRCUITS.
- UNE 51024:1987 PETROLEUM PRODUCTS. DETERMINATION OF FLASH POINT. ABEL-PENSKY CLOSED TESTER
American Society for Testing and Materials (ASTM), Pour point meter
- ASTM D5950-96 Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)
- ASTM D6892-03 Standard Test Method for Pour Point of Petroleum Products (Robotic Tilt Method)
- ASTM D5950-14(2020) Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)
- ASTM D5950-02 Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)
- ASTM D5950-02(2007) Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)
- ASTM D5950-12 Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)
- ASTM D5853-95 Standard Test Method for Pour Point of Crude Oils
- ASTM D5853-95(2000)e1 Standard Test Method for Pour Point of Crude Oils
- ASTM D5853-16 Standard Test Method for Pour Point of Crude Oils
- ASTM D5853-17 Standard Test Method for Pour Point of Crude Oils
- ASTM D5853-17a Standard Test Method for Pour Point of Crude Oils
- ASTM D5950-12a Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)
- ASTM D6892-03(2014) Standard Test Method for Pour Point of Petroleum Products 40;Robotic Tilt Method41;
- ASTM D5950-14 Standard Test Method for Pour Point of Petroleum Products 40;Automatic Tilt Method41;
- ASTM D97-05a Standard Test Method for Pour Point of Petroleum Products
- ASTM D5853-06 Standard Test Method for Pour Point of Crude Oils
- ASTM D97-87e1 Standard Test Method for Pour Point of Petroleum Oils
- ASTM D5853-09 Standard Test Method for Pour Point of Crude Oils
- ASTM D5853-11 Standard Test Method for Pour Point of Crude Oils
- ASTM D6892-03(2008) Standard Test Method for Pour Point of Petroleum Products (Robotic Tilt Method)
- ASTM D97-05 Standard Test Method for Pour Point of Petroleum Products
- ASTM D97-17b Standard Test Method for Pour Point of Petroleum Products
- ASTM D5985-08 Standard Test Method for Pour Point of Petroleum Products (Rotational Method)
- ASTM D97-17a Standard Test Method for Pour Point of Petroleum Products
- ASTM D6892-03(2020) Standard Test Method for Pour Point of Petroleum Products (Robotic Tilt Method)
- ASTM D5985-02(2020) Standard Test Method for Pour Point of Petroleum Products (Rotational Method)
- ASTM D7346-14 Standard Test Method for No Flow Point and Pour Point of Petroleum Products
- ASTM D97-04 Standard Test Method for Pour Point of Petroleum Products
- ASTM D97-96a Standard Test Method for Pour Point of Petroleum Products
- ASTM D97-02 Standard Test Method for Pour Point of Petroleum Products
- ASTM D97-06 Standard Test Method for Pour Point of Petroleum Products
- ASTM D97-09 Standard Test Method for Pour Point of Petroleum Products
- ASTM D97-11 Standard Test Method for Pour Point of Petroleum Products
- ASTM D97-17b(2022) Standard Test Method for Pour Point of Petroleum Products
- ASTM D97-15 Standard Test Method for Pour Point of Petroleum Products
- ASTM D97-16 Standard Test Method for Pour Point of Petroleum Products
- ASTM D97-12 Standard Test Method for Pour Point of Petroleum Products
- ASTM D97-17 Standard Test Method for Pour Point of Petroleum Products
- ASTM D7346-12 Standard Test Method for No Flow Point and Pour Point of Petroleum Products
- ASTM D7346-15(2021) Standard Test Method for No Flow Point and Pour Point of Petroleum Products and Liquid Fuels
- ASTM D7299-20 Standard Practice for Verifying Performance of a Vertical Inclinometer Probe
- ASTM D729-95 Standard Practice for Verifying Vertical Inclinometer Probe Performance
- ASTM D5985-96e1 Standard Test Method for Pour Point of Petroleum Products (Rotational Method)
- ASTM D5985-02 Standard Test Method for Pour Point of Petroleum Products (Rotational Method)
- ASTM D5985-02(2008) Standard Test Method for Pour Point of Petroleum Products (Rotational Method)
- ASTM D7346-15 Standard Test Method for No Flow Point and Pour Point of Petroleum Products and Liquid Fuels
- ASTM D97-07 Standard Test Method for Pour Point of Petroleum Products
- ASTM D6749-02(2018) Standard Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method)
- ASTM D6749-02 Standard Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method)
- ASTM D6749-02(2007) Standard Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method)
- ASTM D5985-02(2014) Standard Test Method for Pour Point of Petroleum Products 40;Rotational Method41;
- ASTM D5949-01e1 Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method)
- ASTM D5949-96 Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method)
- ASTM D5949-01 Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method)
- ASTM D5949-08 Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method)
- ASTM D594-85(1997) Standard test method for pour point of petroleum products (automatic pressure regulating pulse method)
- ASTM D6749-02(2012) Standard Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method)
- ASTM D5949-16(2022) Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method)
- ASTM D5949-16 Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method)
- ASTM D6230-98(2005) Standard Test Method for Monitoring Ground Movement Using Probe-Type Inclinometers
- ASTM D6230-21 Standard Practices for Monitoring Earth or Structural Movement Using Inclinometers
- ASTM D6230-21e1 Standard Practices for Monitoring Earth or Structural Movement Using Inclinometers
- ASTM D5346-93(1997) Standard Test Method for Determination of the Pour Point of Petroleum Oil Used in Fatliquors and Softening Compounds
- ASTM D5346-17(2021) Standard Test Method for Determination of the Pour Point of Petroleum Oil Used in Fatliquors and Softening Compounds
- ASTM D5346-17 Standard Test Method for Determination of the Pour Point of Petroleum Oil Used in Fatliquors and Softening Compounds
- ASTM D5346-93(2003)e1 Standard Test Method for Determination of the Pour Point of Petroleum Oil Used in Fatliquors and Softening Compounds
- ASTM D5949-14 Standard Test Method for Pour Point of Petroleum Products 40;Automatic Pressure Pulsing Method41;
- ASTM F1677-96 Standard Test Method for Using a Portable Inclineable Articulated Strut Slip Tester (PIAST)
- ASTM D5277-92(2002) Standard Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester
- ASTM D5346-93(2009) Standard Test Method for Determination of the Pour Point of Petroleum Oil Used in Fatliquors and Softening Compounds
- ASTM E2133-03(2020) Standard Test Method for Using a Rolling Inclinometer to Measure Longitudinal and Transverse Profiles of a Traveled Surface
- ASTM D36-06 Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)
- ASTM E28-67 Standard Method Of Test For Softening Point By Ring-And-Ball Apparatus
- ASTM D3828-05 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
- ASTM D5252-98a Standard Practice for the Operation of the Hexapod Drum Tester
- ASTM D5251-98a Standard Practice for the Operation of the Tetrapod Walker Drum Tester
- ASTM D5251-98a(2003) Standard Practice for the Operation of the Tetrapod Walker Drum Tester
- ASTM D93-02 Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester
- ASTM D3828-12a Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
- ASTM D93-20 Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester
- ASTM D36/D36M-14e1 Standard Test Method for Softening Point of Bitumen &40;Ring-and-Ball Apparatus&41;
- ASTM D36/D36M-14 Standard Test Method for Softening Point of Bitumen 40;Ring-and-Ball Apparatus41;
- ASTM D93-00 Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester
- ASTM D93-02a Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester
- ASTM D93-10a Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
RO-ASRO, Pour point meter
American National Standards Institute （ANSI), Pour point meter
能源部, Pour point meter
- SY 7516-1992 Determination of Pour Point of Modified Crude Oil by Melting Method
Danish Standards Foundation, Pour point meter
- DS 2362-1:1994 Measuring equipment-Inclination measuring instruments-Part 1:Inclination measuring instruments (levels)-Definitions,requirements,testing
- DS 2362-3:1994 Measuring equipment-Inclination measuring instruments-Part 3:Electronic inclination measuring elements- dimensions, requirements
- DS 2362-2:1994 Measuring equipment-Inclination measuring instruments-Part 2:Spirit level vials-Dimensions,requirements
- DS/EN 45501+AC:1993 Metrologicai aspects of non-automatic weighing instruments
- DS/ISO 3274:1981 Instruments for the measurement of surface roughness by the profile method. Contact (stylus) instruments of consecutive profile transformation. Contact profile meters, system M
未注明发布机构, Pour point meter
- ISO 3016:1994/Cor 1:1995 Petroleum products — Determination of pour point
- BS 894:1956(2011) Specification for Ubbelohde apparatus for flow and drop points
- DIN IEC 1342:1996 Nuclear instrumentation — Multichannel! pulse height analyzers — Main characteristics, technical requirements and test methods
U.S. Air Force, Pour point meter
Society of Automotive Engineers (SAE), Pour point meter
ES-AENOR, Pour point meter
- UNE 115-408-1992 Earth-moving machinery. Dumpers. Terminology and commercial specifications
VN-TCVN, Pour point meter
- TCVN 3753-2011 Standard Test Method for Pour Point of Petroleum Products
- TCVN 7497-2005 Bitumen.Test method for softening point (ring-and-ball apparatus)
European Committee for Standardization (CEN), Pour point meter
- EN ISO 12863:2022 Standard test method for assessing the ignition propensity of cigarettes (ISO 12863:2022)
- EN ISO 12863:2010 Standard test method for assessing the ignition propensity of cigarettes (ISO 12863:2010)
- EN ISO 18674-3:2017 Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 3: Measurement of displacements across a line: Inclinometers
- EN ISO 18674-3:2017/A1:2020 Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 3: Measurement of displacements across a line: Inclinometers - Amendment 1 (ISO 18674-3:2017/Amd 1:2020)
Professional Standard - Earthquake, Pour point meter
- DB/T 31.1-2008 Technical requirements of instruments in network for earthquake monitoring.The instrument for crustal deformation observation.Part 1: Tiltmeter
PL-PKN, Pour point meter
- PN C81546-1972 Paints The determination of yellowing tendency of white pigmented point coatings
- PN-EN ISO 3016-2019-06 P Petroleum and related products from natural or synthetic sources--Determination of pour point (ISO 3016:2019)
- PN-EN ISO 3016-2019-06/Ap1-2020-10 E Petroleum and related products from natural or synthetic sources -- Determination of pour point (ISO 3016:2019)
Professional Standard - Commodity Inspection, Pour point meter
- SN/T 3017-2011 Standard test method for pour point of petroleum products. Automatic air pressure method
- SN/T 2159-2008 Test method of wool tops defect.Method of wool top defect instrument
Taiwan Provincial Standard of the People's Republic of China, Pour point meter
- CNS 14667-2002 Method of test for pour point of petroleum products(automatic tilt method)
- CNS 9924-1983 Fixed Centre Spring Bow with Interchangeable Point for School Drawing Instruments
- CNS 8892-1982 Fixed Centre Spring Bow with Interchangeable Point for Precision Drawing Instruments (P)
CZ-CSN, Pour point meter
工业和信息化部, Pour point meter
Professional Standard - Aviation, Pour point meter
- HB 6549-1991 Minimum performance requirements for tilt and pitch instruments of civil aircraft
Professional Standard - Petrochemical Industry, Pour point meter
- SH/T 0771-2005 Test method for pour point of petroleum products (Automatic pressure pulsing method)
Professional Standard - Traffic, Pour point meter
- JT/T 615-2004 Apparatus for Softening Point of Bitumen
- JT/T 386.1-2017 Motor vehicle exhaust analyzer.Part 1:Exhaust analyzer for Ignition vehicle
HU-MSZT, Pour point meter
Professional Standard - Ocean, Pour point meter
- HY 016.14-1992 Basic environmental test methods for marine instruments Tilt and roll tests
- HY 21.10-1992 Guidelines for basic environmental test methods for marine instruments tilt and roll tests
交通运输部, Pour point meter
ES-UNE, Pour point meter
- UNE-EN ISO 3016:2020 Petroleum and related products from natural or synthetic sources - Determination of pour point (ISO 3016:2019)
- UNE-EN ISO 3679:2023 Determination of flash point - Method for flash no-flash and flash point by small scale closed cup tester (ISO 3679:2022, Corrected versión 2023-05)
British Standards Institution (BSI), Pour point meter
- BS ISO 19636:2019 Ships and marine technology. General requirements for inclinometers used for the determination of trim and list of LNG carriers
- BS EN ISO 3016:2019 Petroleum and related products from natural or synthetic sources. Determination of pour point
- BS 2000-15:1995 Methods of test for petroleum and its products - Petroleum products - Determination of pour point
- BS EN ISO 3679:2022 Determination of flash point. Method for flash no-flash and flash point by small scale closed cup tester
- BS PD ISO/TR 5729:2021 Evaluation of physical parameters of filter paper substrates for the determination of the ignition propensity of cigarettes
- 22/30441177 DC BS EN ISO 3679. Determination of flash point Method for flash no-flash and flash point by small scale closed cup tester
Association Francaise de Normalisation, Pour point meter
- NF T60-581*NF EN ISO 3016:2019 Petroleum and related products from natural or synthetic sources - Determination of pour point
- NF EN ISO 3016:2019 Produits pétroliers et connexes d'origine naturelle ou synthétique - Détermination du point d'écoulement
SE-SIS, Pour point meter
Professional Standard - Chemical Industry, Pour point meter
Anhui Provincial Standard of the People's Republic of China, Pour point meter
- DB34/T 925-2009 Determination of Smoke Point of Vegetable Oils and Fats by Digital Smoke Point Apparatus
Professional Standard - Nuclear Industry, Pour point meter
- EJ/T 656-1999 The kits of γ-ray standard point-source for γ-ray spectrometry
United States Navy, Pour point meter
- NAVY DOD-L-81846 B (2)-2000 LUBRICATING OIL, INSTRUMENT, BALL BEARING, HIGH FLASH POINT [Superseded: SAE AMS-L-81846A, SAE AMS-L-81846]
- NAVY DOD-L-81846 B VALID NOTICE 1-1991 LUBRICATING OIL, INSTRUMENT, BALL BEARING, HIGH FLASH POINT
- NAVY DOD-L-81846 B-1986 LUBRICATING OIL, INSTRUMENT, BALL BEARING, HIGH FLASH POINT
Professional Standard - Geology, Pour point meter
- DZ 28.7-1984 Basic environmental test conditions and methods for geological instrument products Tilt and swing test
- DZ 0039.8-1992 Basic environmental test conditions and methods for geological instrument products Tilt and swing test
Professional Standard - Water Conservancy, Pour point meter
- SL 414-2007 Calibration code for bitumen softening meter
SAE - SAE International, Pour point meter
Group Standards of the People's Republic of China, Pour point meter
- T/CMA 032-2021 Calibration method for automatic benzene crystal point testers
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Pour point meter
Professional Standard - Military and Civilian Products, Pour point meter
- WJ 2293-1995 Verification rules for microscope temperature platform melting point tester
Association of German Mechanical Engineers, Pour point meter
- VDI/VDE 2602-1983 Roughness measurement with electric contact (stylus) profile meters
Instrument Society of America (ISA), Pour point meter
- ISA RP67.04.02-2010 Methodologies for the Determination of Setpoints for Nuclear Safety-Related Instrumentation
YU-JUS, Pour point meter
- JUS H.P8.501-1983 Testing of pesticides. Determination for flash point by Pensky-Martens closed tester
Defense Logistics Agency, Pour point meter
The American Road & Transportation Builders Association, Pour point meter
- AASHTO T 53-2011 Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus)
AASHTO - American Association of State Highway and Transportation Officials, Pour point meter
- T 53-2009 Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus)
- T 53-2008 Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus)
- T 53-2006 Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus)
- T 53-1992 Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus)