13.060.01 水质综合 标准查询与下载

T/SSESB 6-2023 水质 急性毒性 高通量发光细菌测试方法

1 范围　 2 规范性引用文件　 3 术语和定义　 4 方法原理　 5 试剂和材料　 6 仪器和设备　 7 样品采集与保存　 8 样品处理与分析　 9 结果计算与表示　 10 精密度　 11 质量保证和质量控制　 12 废物处置　

Water quality - Acute toxicity - High - throughput luminescent bacteria test method

T/GXAS 497-2023 水质 六价铬的测定 现场快速监测分光光度法

本文件规定了测定水中六价铬的现场快速监测分光光度法。  本文件适用于地表水、地下水、生活污水和海水中六价铬的现场快速测定，不适用于工业废水中六价铬的现场快速测定。  当进样体积为10 mL检测光程为30 mm时，本方法检出限为0.005 mg/L，测定下限为0.020 mg/L，测定上限为0.500 mg/L。样品浓度高于测定上限时，稀释后测定。

Water quality—Determination of hexavalent chromium —Rapid monitoring in the field spectrophotometric method

ISO/FDIS 21939-2:2023 以中水回用为目的的工业废水处理能耗的计算和表达方法 第2部分：能量回收核算

A method to calculate and express energy consumption of industrial wastewater treatment for the purpose of water reuse — Part 2: Accounting for energy recovery

ISO/FDIS 16075-6:2023 灌溉项目处理废水使用指南 第 6 部分：施肥

Guidelines for treated wastewater use for irrigation projects — Part 6: Fertilization

DB13/T 5704-2023 地下水位降落漏斗划分规范

Specifications for the division of groundwater table depression funnels

ISO/DIS 16075-6 灌溉工程处理后废水使用指南》第6部分：施肥

Guidelines for treated wastewater use for irrigation projects — Part 6: Fertilization

ISO/CD TR 24589-1:2023 供水和废水系统资产管理指南 良好管理实践示例 第 1 部分：供水

Guidelines for the management of assets of water supply and wastewater systems — Examples of good practice of management — Part 1: Water supply

ISO/DIS 21939-2 以中水回用为目的的工业废水处理能耗的计算和表示方法 第2部分：能量回收核算

A method to calculate and express energy consumption of industrial wastewater treatment for the purpose of water reuse — Part 2: Accounting for energy recovery

ISO/CD 20468-9 中水回用系统处理技术性能评价指南》第9部分：第9部分：电氯化

Guidelines for performance evaluation of treatment technologies for water reuse systems — Part 9: Part 9: Electro-chlorination

ISO/FDIS 24575 分散式废水处理和/或再利用规划成本分析的一般原则和指南

General principles and guidelines for cost analysis in planning of decentralized wastewater treatment and/or reuse

ISO/CD TR 24589-2:2023 供水和废水系统资产管理指南 良好管理实践示例 第 2 部分：废水系统

Guidelines for the management of assets of water supply and wastewater systems — Examples of good practice of management — Part 2: Wastewater systems

ISO/CD 9784 中水回用二级出水生物过滤导则

Guidelines for biological filtration of secondary effluent for water reuse

ISO/CD 9111 城镇中水回用 再生水利用效益评价导则

Water reuse in urban areas — Guideline for benefit evaluation of reclaimed water use

ISO 24575:2023 分散式废水处理和/或再利用规划中成本分析的一般原则和指南

This document specifies the general principles and provides guidance on the quantitative characterization of the life cycle cost of a complete wastewater management system, including collection, treatment and, optionally, reuse. It enables the consideration of different degrees of distribution, including non-sewered systems for one or more dwellings and associated trucking operations. The methodology provided in this document is applicable to urban or rural areas wherein several decentralized wastewater treatment and reuse systems can provide a lower cost solution than a single centralized plant. Similarly, the same methodology can be applied for industrial reuse systems, where several separate plants on a large industrial site can be considered instead of one treatment system. The scope of this document includes the following: a) Guidance on the determination of the degrees of distribution of decentralized wastewater treatment and reuse systems. b) A definition of the elements and components included in the life cycle cost of the different degrees of distribution in wastewater management systems, including construction, operation and maintenance. c) Guidance on the required steps for calculating life cycle cost indicators, including considerations of term and interest, operation and maintenance, replacement parts, equipment life expectancy, the value of water for reuse and other income from by-products. d) A definition of the metrics for reporting results, including the cost per unit, scope, term and interest. The following secondary costs and other considerations are not within the scope of this document: — cost of eventual disposal of the system; — guidance on wastewater treatment process selection and design; — health and sustainability considerations (although health and sustainability are primary considerations in design and decisions); — social impact factors and/or environmental risks and impacts.

General principles and guidelines for cost analysis in planning of decentralized wastewater treatment and/or reuse

BS ISO 22519:2023 基于膜的注射用水(WFI)生产

1   Scope This document provides a benchmark for evaluation of the design, operation and performance of water for injection ( WFI ) generation systems based on membranes. This document is applicable to the design of new systems. This document covers the following topics: — principles of membrane-based WFI generation systems ; — process design, construction, operation and maintenance of membrane-based WFI generation systems ; — controlling membrane-based WFI generation system parameters. This document does not cover the following topics: — validation; — distillation.

Membrane-based generation of water for injection (WFI)

T/CI 058-2023 复合型污染河道治理与修复技术指南

　总体要求 4.1 设计原则 4.1.1 安全合理原则。治理措施不影响河道原有的行洪、排涝、供水、航运等功能。 4.1.2 生态优先原则。最大限度上减少对生态环境的破坏和对土地资源的占用，采用生态方式削减、拦截河道水体污染物，维持河道生态位，恢复河道生态功能。 4.1.3 因地制宜原则。充分利用现状河道的形态、地形、水文等条件选择适宜的治理技术，植物物种的选择及配置宜以乡土种为主。 4.1.4 功能协调原则。河道治理需充分考虑河道的生态、环境、景观、娱乐、水利等功能，推进河道系统治理管理，水岸共治。 4.1.5 经济可行原则。统筹前期建设与后期管护，尽可能降低前期建设成本和后期的养护费，实现河道治理生态、环境效益与经济效益统一。 4.1.6 环境友好原则。河道治理中使用的材料、生物、工艺不产生二次污染，不产生有毒有害物质，对河道生态环境无破坏性。 4.2 设计目标 4.2.1 水质目标。改善河道水质，水质达到水功能区划或地方相关环境整治要求。 4.2.2 生态目标。满足河道的蓄水、行洪、航运、净化、景观等综合功能，稳定河岸带、提升生物多样性、恢复河道生态系统，实现“有河有水，有鱼有草，人水和谐”的生态目标。

Technical guide for treatment and restoration of complex polluted river

T/CIET 055-2023 工业节水设备评价通则

本文件规定了工业节水设备评价的术语和定义、评价原则、评价方法、评价程序、评价要求、评价结论和报告、评价结论验证等内容。 本文件适用于国内企业应用的工业节水设备评价工作。

General rules for evaluation of industrial water-saving equipment

DB37/T 4595-2023 地表水浮游蓝藻监测技术规范

Technical specifications for monitoring planktonic cyanobacteria in surface water

T/JSWA 006-2023 次氯酸钠 溴酸盐、氯酸盐的测定 离子色谱法

本文件规定了离子色谱法测定次氯酸钠中溴酸盐、氯酸盐方法的检出限和测定下限、样品处理、分析步骤、结果计算、精密度和准确度、废物处理。

Determination of sodium hypochlorite bromate and chlorate by ion chromatography

ISO 22519:2023 纯化水、注射用水预处理及生产系统

This document provides a benchmark for evaluation of the design, operation and performance of water for injection (WFI) generation systems based on membranes. This document is applicable to the design of new systems. This document covers the following topics: — principles of membrane-based WFI generation systems; — process design, construction, operation and maintenance of membrane-based WFI generation systems; — controlling membrane-based WFI generation system parameters. This document does not cover the following topics: — validation; — distillation.

Membrane-based generation of water for injection (WFI)