13.060.30 污水 标准查询与下载

T/CASME 131-2022 太阳能农村生活污水一体化处理设备

本文件规定了太阳能农村生活污水一体化处理设备的型号及组成、技术要求、试验方法、检验规则、标志、运输、包装和贮存。

Solar energy rural sewage integrated treatment equipment

DB4403/T 272-2022 入河（海）排放口设置技术规范

本文件适用于深圳市入河（海）排放口的设置。

Technical specifications for the setting of discharge outlets into rivers (seas)

T/CASME 112-2022 智慧城市轨道交通给水卫生系统技术规范

本文件规定了智慧城市轨道交通给水卫生系统的术语和定义、给水设计要求、排水设计要求、节水、节能与水资源利用、卫生设计要求、卫生管理要求及卫生检测要求。

Technical specification for water supply and sanitation system of smart city rail transit

T/SHMHZQ 050-2022 污水监测设备及采样流程技术规范

1 范围 2 规范性引用文件 3 一般术语和定义 4 污水监测设备及相关辅助设备 5 采样流程 6 监测采样 7 样品保存 8 样品运输 9 样品接收 10 样品质量控制规定

Technical specification for sewage monitoring equipment and sampling process

T/CSTE 0174-2022 质量分级及“领跑者”评价要求 一体化生活污水治理设备

4 技术要求 4.1 基本要求 4.2 评价指标分类 4.3 评价指标体系框架 5 评价方法及等级划分

Assessment requirements for quality grading and forerunner — Integrated domestic sewage treatment equipment

T/CSTE 0173-2022 质量分级及“领跑者”评价要求 一体化预制排水泵站

4 技术要求 4.1 基本要求 4.2 评价指标分类 4.3 评价指标体系框架 5 评价方法及等级划分

Assessment requirements for quality grading and forerunner -integrated prefabricated drainage pumping station

T/CAEPI 51-2022 农村生活污水处理设施运行维护技术指南

Technical Guidelines for Operation and Maintenance of Rural Domestic Sewage Treatment Facilities

T/QGCML 406-2022 微孔曝气器

本文件规定了微孔曝气器的术语和定义、分类和型号、要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于盘式、管式和板式橡胶膜片微孔曝气器的生产和检验。

Microporous aerator

T/GZAEPI 003-2022 医疗机构污水处理运维管理规范

总体要求、收集系统运维管理、处理设施运维管理、自控系统运维管理、监测、安全与应急管理、运行记录

Specification for operation and maintenance management of sewage treatment in medical organization

DB34/ 4294-2022 半导体行业水污染物排放标准

Discharge Standards for Water Pollutants in the Semiconductor Industry

T/GXAS 386-2022 乡镇和农村生活污水处理设施远程控制系统技术规范

本文件界定了乡镇和农村生活污水处理设施远程控制系统技术涉及的术语和定义，规定了总体要求、设施分类及配置、远程控制管理建设、数据要求、远程控制管理系统运行维护和管理的相关技术要求。 本文件适用于乡镇和农村生活污水处理设施远程控制系统的建设和运行维护。

Technical specification for remote control system of township and rural domestic sewage treatment facilities

T/WSJD 27-2022 医疗机构污水氯化消毒处理及监测技术规范

本文件规定了医疗机构污水氯化消毒处理、监测、运行管理等技术规范。 本文件适用于采用氯化消毒方式进行污水消毒处理的医疗机构。

Technical Specifications for Chlorination Disinfection Treatment and Monitoring of Sewage in Medical Institutions

T/ACEF 040-2022 水处理用自净型鳃式微孔曝气器

1.分类和型号 2.工作条件 3.要求 4.试验方法 5.检测规则 6.标志、包装、运输、贮存

Self-cleaning lamellen microporous diffuser for water and wastewater treatment

DB32/ 4384-2022 酿造工业水污染物排放标准

Discharge standard of water pollutants for brewing industry

T/SDEPI 029-2022 高负荷潜流人工湿地水质净化工程技术规范

本文件适用于高负荷潜流人工湿地进水为轻污染水体的深度净化工程。

Technical Specification of High Load Subsurface Flow Constructed Wetlands for Water Purification

ASTM C478/C478M-22 圆形预制钢筋混凝土人孔部分的标准规范

1.1 This specification covers the manufacture and purchase requirements of products used for the assembly and construction of circular vertical precast reinforced concrete manholes and structures used in sewer, drainage, and water works. 1.2 Part I, Sections 1 – 11, of this specification presents general requirements and requirements that are common to each precast concrete product covered by this specification. 1.3 Part II of this specification presents specific requirements for each manhole product in the following sections: Product Section Grade Rings 12 Flat Slab Tops 13 Risers and Conical Tops 14 Base Sections 15 Steps and Ladders 16 NOTE 1—Future products will be included in Part II in a future revision of this specification. 1.4 The values stated in either inch pound or SI units are to be regarded separately as standard. The SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. NOTE 2—This specification is a manufacturing and purchase specification only and does not include requirements for backfill, or the relationship between field load conditions and the strength requirements of the manhole products and appurtenances. Experience has shown, however, that the successful performance of this product depends upon the proper selection of the product strength, type of foundation and backfill, and care in the field installation of the manhole products and connecting pipes. The owner of the project for which these products are specified herein is cautioned to require inspection at the construction site. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Circular Precast Reinforced Concrete Manhole Sections

T/GXAS 367-2022 城镇自来水厂站智能化技术规范

本文件界定了城镇自来水厂站智能化技术涉及的术语和定义、缩略语，规定了总体要求、设备仪表、水处理监控、系统架构及功能、系统软件平台、管理级管理平台和监控设备部署的要求。 本文件适用于广西行政区域内城镇自来水厂站智能化建设与维护。

Technical specification for intelligent waterworks and stations in cities and towns

DB52/T 1057-2022 农村生活污水处理技术规范

Technical Specifications for Rural Domestic Sewage Treatment

T/HAEPCI 46-2022 湖南省分散式农村生活污水处理工程技术规范

本技术规范规定了湖南省分散式农村生活污水的收集、处理、施工验收、运行和维护管理的技术要求。 本技术规范适用于湖南省农村地区偏僻的单户、相邻几户、多户农户及成片居住的农户的生活污水处理。

Engineering technical specifications for treatment of rural domestic wastewater in Hunan province

T/CASMES 59-2022 水处理用平流式沉淀池刮泥机

本文件规定了水处理用平流式沉淀池刮泥机（以下简称“刮泥机”）的型式、型号和基本参数、一般要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于水处理用平流式沉淀池刮泥机的制造和检验。

Peripheral drive sludge scraper for radial flow sedimentation tank in water & sewage treatment plant