共找到 32 条与 相关的标准,共 3 页
本文件描述了锅炉用水和冷却水中痕量铜、铁、钠、钙、镁含量的测定电感耦合等离子体质谱法。 本文件适用于锅炉用水和冷却水中痕量铜、铁、钠、钙、镁含量的测定。测定范围:铜含量0.1μg/L~1000μg/L、铁含量5μg/L~1000μg/L、钠含量10μg/L~1000μg/L、钙含量10μg/L~1000μg/L、镁含量1μg/L~1000μg/L,超过1000μg/L时应稀释后测定。
Analysis of water used in boiler and cooling system—Determination of trace copper, iron, sodium, calcium and magnesium—Inductively coupled plasma mass spectrometry (ICP-MS)
本文件描述了工业循环冷却水、锅炉给水、凝结水中溶解氧的测定方法。 本文件中碘量法适用于工业循环冷却水中溶解氧的质量浓度为0.2 mg/L~8 mg/L(以O2 计)的
Determination of dissolved oxygen in water for industrial circulating cooling system and boiler
本文件描述了锅炉用水和循环冷却水中锌离子的测定方法。 本文件适用于锅炉用水和循环冷却水中锌含量为0.2 mg/L~5.
Analysis of water used in boiler and cooling system—Determination of zinc
本标准规定了再生水中茶系物的测定方法一一气相色谱法。本标准适用于再生水中葵.甲苯、乙葵.邻二甲茶.间二甲共.对二甲苯.葵乙烯及异两葵八种茶系物含量为0.5 pg/L一100 pg/工范围的测定。本标准也适用于地表水.工业用水及生活用水中葵系物含量的测定。
Reclaimed water quality—Determination of benzene homologues—Gas chromatography
本标准规定了再生水中阴离子表面活性剂含量的测定方法 ———亚甲蓝分光光度法。本标准适用于再生水中阴离子表面活性剂含量为0.05 mg/L~1.5 mg/L范围的测定,对更高含量的样品可减少取样量或稀释后测定。本标准也适用于地表水、废水中阴离子表面活性剂含量的测定。
Reclaimed water quality—Determination of anionic surfactants—Methylene blue spectrophotometric method
本标准规定了再生水中总砷含量的测定方法一一原子荧光光谱法。本标准适用于再生水中总砷含量为0.1 ng/L一50 ng/L的测定。
Reclaimed water quality—Determination of total arsenic—Atomic fluorescence spectrometry
本标准规定了离子色谱法测定再生水中氟离子(FE-)、毛离子(Cl1-).亚硝酸根离子(NO,-)硝酸根离子(NO;)、硫酸根离子(SO)的方法。本标准适用于再生水中氟离子(F-)、毛离子(Cl-)、硝酸根离子(NO-)及硫酸根离子(SO,2-)含量三0.10 mg/L;亚硝酸根离子(NO,)含量记0.05 mg/L的测定。
Reclaimed water quality—Determination of fluoride,chloride,nitrite,nitrate,sulfate—Ion chromatography
Reclaimed water quality—Determination of sulfide and cyanide—Ion chromatography
Reclaimed water quality—Determination of mercury—Mercury analyzer method
Reclaimed water quality—Determination of chromium—Voltammetry and polarography
Determination of potassium and sodium in water for industrial circulating cooling system and boiler
Determination of sulfate in water for industrial circulating cooling system and boiler
Analysis of water used in boiler and cooling system—Determination of iron
本标准规定了水处理剂中砷和汞含量的测定方法原子荧光光谱法。 本标准适用于使用原子荧光光谱仪对水处理剂中的砷和汞含量进行检测。
Water treatment chemical—Determination of arsenic and mercury—Atomic fluorescence spectrometry
本标准规定了测定锅炉用水和冷却水中化学耗氧量的方法--重铬酸钾快速法。本标准中的容量法适用于天然水、炉水、除盐水以及工业循环冷却水等水样中化学耗氧量的测定,测定范围为0 mg/L~50 mg/L(以氧计),浓度大于50 mg/L的水样应稀释后测定;本标准中的分光光度法适用于地表水、地下水、生活污水和工业废水等水样中化学耗氧量的测定,测定范围为50 mg/L~1 000 mg/L (以氧计),氯离子浓度不得大于1 000 mg/L,浓度大于1 000 mg/L或氯离子含量大于1 000 mg/L的水样应稀释后测定。
Analysis of water used in boiler and cooling system.Determination of chemical oxygen demand.Rapid method with potassium dichromate
本标准规定了锅炉用水和冷却水中氯化物的测定'硫氰化铵滴定法”本标准适用于夭然水、锅炉用水和循环冷却水中氯化物含量为5mg/LNlOOmg/L的测定,氯化物含量大于100 mg/L的水样应经稀释后测定″
Analysis of water used in boil and cooling system.Determination of chloride.Ammonium thiocyanate titration method
Methods for analysis of boiler water and cooling water. Determination of iron and copper content. Voltammetric polarography.
Methods for analysis of boiler water and cooling water Determination of trace amounts of copper, iron, zinc and aluminum Graphite furnace atomic absorption spectrometry
Method for determination of carboxylate and sulfonate polymer content in circulating cooling water
This Japanese Industrial Standard specifies the testing methods for wastewater discharged from factories (including offices, hereafter the same).
Testing methods for industrial wastewater
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号