13.110 机械安全 标准查询与下载

T/QGCML 1067-2023 防夹手伸缩梯

本文件规定了防夹手伸缩梯的功能尺寸、技术要求、试验方法、检验方法和标志、包装、运输及贮存。 本文件适用于防夹手伸缩梯（不包括带有延伸元件的梯子）。

Anti-hand pinch telescopic ladder

DB3204/T 1050-2023 锂离子动力电池工厂安全风险管控指南

Lithium-ion Power Battery Factory Safety Risk Management Guide

EN ISO 13849-1:2023 机械安全.控制系统中与安全相关的部分.第1部分:设计的一般原则

Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2023)

T/GZSEIA 0005-2023 叉车维护保养技术规程

规定了叉车的术语和定义，使用单位、安全管理人员、驾驶人员的职责以及叉车的维护保养 内容和技术要求

Guidelines for hierarchical control of safety risk for the use of special equipment

T/GZSEIA 0009-2023 压力容器年度检查规范

规定了压力容器年度检查的术语和定义、评定规则。

Pressure vessel annual inspection specification

GSO ISO/TR 22100-2:2023 机械安全 与 ISO 12100 的关系 第2部分：ISO 12100 与 ISO 13849-1 的关系

ISO/TR 22100-2:2013 describes the general relationship between ISO 12100 and ISO 13849‑1 used to reduce the risk of harm. It focuses on the use of safety-related parts of control systems in relation to risk assessment and the risk reduction process.

Safety of machinery — Relationship with ISO 12100 — Part 2: How ISO 12100 relates to ISO 13849-1

GSO ISO/TR 22053:2023 机械安全 保障支持系统

This document provides guidance for the design and integration of a safeguarding supportive system (SSS) which is intended to include a mode selection as part of an SRP/CS or to add a layer of personnel authentication and authorization to an IMS designed according to ISO 11161. This document is meant to be used in conjunction with ISO 11161. This document is applicable to the SSS but does not address personnel qualification and competency.

Safety of machinery — Safeguarding supportive system

GSO ISO/TR 22100-5:2023 机械安全 与 ISO 12100 的关系 第5部分：人工智能机器学习的影响

This document addresses how artificial intelligence machine learning can impact the safety of machinery and machinery systems. This document describes how hazards being associated with artificial intelligence (AI) applications machine learning in machinery or machinery systems, and designed to act within specific limits, can be considered in the risk assessment process. This document is not applicable to machinery or machinery systems with AI applications machine learning designed to act beyond specified limits that can result in unpredictable effects. This document does not address safety systems with AI, for example, safety-related sensors and other safety-related parts of control systems.

Safety of machinery — Relationship with ISO 12100 — Part 5: Implications of artificial intelligence machine learning

ISO/CD 12895 机械安全 全身接触识别及衍生风险防范

Safety of machinery — Identification of whole body access and prevention of derived risks

ISO/CD 6909 机床安全之折弯机

Machine tools Safety — Press brakes

ISO 23063:2023 铸造机械 高压压铸机安全要求

Foundry machinery — Safety requirements for high pressure die casting machines

ISO/CD 11553-2:2023 机械安全 激光加工机 第 2 部分：手持式或手动激光加工机的安全要求

Safety of machinery — Laser processing machines — Part 2: Safety requirements for hand-held or hand-operated laser processing machines

ISO/DIS 13105-2 建筑施工机械设备《混凝土表面浮饰机械》第2部分：安全要求及验证

Building construction machinery and equipment — Machinery for concrete surface floating and finishing — Part 2: Safety requirements and verification

ISO/DIS 11161 机械安全 机械与系统的集成 基本要求

Safety of machinery — Integration of machinery into a system — Basic requirements

ISO/FDIS 13105-2:2023 建筑施工机械和设备 混凝土表面抹平机械 第2部分：安全要求和验证

Building construction machinery and equipment — Machinery for concrete surface floating and finishing — Part 2: Safety requirements and verification

T/HEBSEA 1-2023 客运索道司机操作规程

（1）规程中“4 基本要求”明确了客运索道使用单位及司机的基本要求。 （2）规程中“5 作业程序及要求”明确了运行中检查、试运行、运行中、停止运行后等操作的检查要领及要点，给出了客运索道司机对各个部位的检查要点及要求。 （3）规程中“6 应急处置与救援”给出了应急处置和架空索道应急救援的安全要点。

Operating rules for passenger cableway drivers

ISO 13849-1:2023 机械安全.控制系统的安全相关部件.第1部分:设计的一般原则

This document specifies a methodology and provides related requirements, recommendations and guidance for the design and integration of safety‐related parts of control systems (SRP/CS) that perform safety functions, including the design of software. This document applies to SRP/CS for high demand and continuous modes of operation including their subsystems, regardless of the type of technology and energy (e.g. electrical, hydraulic, pneumatic, and mechanical). This document does not apply to low demand mode of operation. NOTE 1 See 3.1.44 and the IEC 61508 series for low demand mode of operation. This document does not specify the safety functions or required performance levels (PLr) that are to be used in particular applications. NOTE 2 This document specifies a methodology for SRP/CS design without considering if certain machinery (e.g. mobile machinery) has specific requirements. These specific requirements can be considered in a Type-C standard. This document does not give specific requirements for the design of products/components that are parts of SRP/CS. Specific requirements for the design of some components of SRP/CS are covered by applicable ISO and IEC standards. This document does not provide specific measures for security aspects (e.g. physical, IT-security, cyber security). NOTE 3 Security issues can have an effect on safety functions. See ISO/TR 22100-4 and IEC/TR 63074 for further information.

Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design

T/SBX 073-2023 多线切割机安全操作规程

本文件规定了多线切割机调试、使用、维修过程中的安全准则、安全操作要求、设备保养要求。 本文件适用于多线切割机在切割水晶、陶瓷、化合物、氧化物、磁性材料、红蓝宝石、单晶硅、稀土材料等各种硬脆性材料的过程中的安全操作。 警示——限于事前接受了多线切割机使用的必要训练，充分理解了安全运转的人员，进行本设备的运转操作和检修作业。尤其是机械电气的检修，应由具有资格的人员进行。要熟知设备上安装的急停按钮的位置、使用方法和功能。

Multi-wire cutting machine safety operating procedures

T/SBX 074-2023 高速倒边机安全操作规程

本文件规定了高速倒边机的安全操作要求、定期检修、设备保养方面的要求。 本文件适用于蓝宝石、半导体材料、光学玻璃、石英晶体、特种陶瓷、稀有金属及合金等硬脆性及贵重材料的精密加工过程中高速倒边机的安全操作。

Safety operation rules for high-speed beveling machine

ISO/FDIS 13855 机械安全 人体接近防护措施的定位

Safety of machinery — Positioning of safeguards with respect to the approach of the human body