13.110 机械安全 标准查询与下载

T/CMISHA 2004-2023 危险化学品储存装置

本文件主要技术内容包括： ——储存装置按照不同维度的产品分类，如按照进出方式，可分为：步入式、外装式和其他方式； ——储存装置型号和编码的编制规则，以及标记的应包含的内容； ——储存装置的主要构成（柜体、功能模块、组件和配件）及示意图； ——储存装置的总体要求，包括使用环境条件、安装条件等； ——储存装置的技术要求，包括材料、各组成部分、功能模块的具体要求； ——各项要求对应的试验方法； ——检验规则； ——文件、标志、包装、运输和贮存等的要求； ——储存装置选型指引。

Intermediate storage installations of hazardous chemicals

KS B ISO 13857-2023 机械安全——防止上肢和下肢到达危险区域的安全距离

Safety of machinery — Safety distances to prevent hazard zones being reached by upper and lower limbs

KS B ISO 13851-2023 机械安全双手控制装置设计和选择原则

Safety of machinery — Two hand control devices — Principles for design and selection

KS B ISO 12100-2023 机械安全设计通则风险评估和风险降低

Safety of machinery — General principles for design — Risk assessment and risk reduction

KS B ISO 13854-2023 机械安全——避免挤压人体各部分的最小间隙

Safe of machinery — Minimum gaps to avoid crushing of parts of the human body

T/QGCML 2770-2023 安全监控系统采集存储压风机实时数据技术规程

本文件规定了安全监控系统采集存储压风机实时数据技术规程的术语和定义、基本要求、系统架构、系统要求、功能要求、注意事项。 本文件适用于压风机实时数据安全监控的全过程。

Technical regulations for the collection and storage of real-time data from compressors by the safety monitoring system

T/QGCML 2789-2023 印染设备安全管理规范

本文件规定了印染设备安全管理规范的总体要求、设计、印染设备管理、建设与验收、运行、持续改进。 本文件适用于印染设备的安全管理。

Safety Management Specifications for Printing and Dyeing Equipment

BS 14200:2023 机械的维护 规格

What is BS 14200:2023 -   Maintenance of machinery   about? Typically, as equipment ages, the rate of deterioration and the frequency of component failure begins to increase. In response,   BS 14200:2023   sets out a pragmatic approach to ongoing machinery maintenance by putting processes in place that monitor and identify decay and adjust inspection and maintenance frequency as appropriate. Who is BS 14200:2023 -   Maintenance of machinery   for? Anyone advising, planning, preparing and supervising the maintenance of machinery. What does BS 14200:2023 -   Maintenance of machinery   cover? BS 14200:2023   specifies requirements for the approaches to be taken so that machinery remains in a safe, reliable and effective condition throughout its working life. BS 14200:2023   applies to powered machinery, including all elements of the machinery (e.g.  pipework, hoses and vessels), where deterioration of the equipment performance could expose persons to a significant increase in risk to their health and safety. NOTE:   BS 14200:2023   is intended to supplement specific manufacturer instructions. It can also be applied to manually powered machinery outside the scope of the Supply of Machinery (Safety) Regulations 2008. Why should you use BS 14200:2023 -   Maintenance of machinery ? It increases the safety of machinery .  

Maintenance of machinery. Specification

DB1306/T 240-2023 特种设备使用单位作业人员配备指南

本文件适用于保定辖区内特种设备使用单位作业人员的配备。

Staffing Guidelines for Special Equipment Using Units

DB41/T 2544-2023 长周期服役压力容器风险评价导则

Guidelines for risk assessment of long-term service pressure vessels

T/ZPP 056-2023 机械行业安全生产作业管理

本文件规定了机械行业安全生产作业的管理要求、设备设施要求和作业环境要求。 本文件适用于机械行业相关企业的安全生产作业。

Safety production operation management in machinery industry

DB5301/T 95-2023 重大活动特种设备安全保障工作规范

Specifications for safety assurance of special equipment for major events

ISO/DIS 14738:2023 机械安全 工业和服务工作站设计的人体测量要求

Safety of machinery — Anthropometric requirements for the design of workstations for industries and services

T/CDSA 305.7-2023 刮船器安全操作规程

本文件规定了船体清洗使用刮船器的作业条件、作业人员要求、作业设备要求和操作要求。 本文件适用于船体清洗作业机构的刮船器操作。

Code of safety practice for operations of ship scrapers

T/SHLX 003-2023 多功能可移动铝合金平台梯

1、本文件规定了多功能可移动铝合金平台梯的术语和定义、总则、尺寸要求、试验方法及判定、标识和使用说明书。 2、本文件适用于工作平台最大高度不超过5000mm，平台面积可以扩展，增加工作区，最大载重不超过150kg/m2(包含使用者体重,以及携带工具、设备及材料的总重量)使用的多功能可移动铝合金平台梯。 3、本文还对多功能可移动铝合金平台梯的使用与维护以标准形式进行规定

Multi-function moveable aluminum alloy platform ladders

GSO ISO 20321:2023 石油、石化和天然气工业 机械安全 动力电梯

This document specifies general safety requirements for the design, testing and production of powered elevators. The requirements are applicable for onshore and offshore applications of such elevators in the petroleum and petrochemical industries. This document does not cover any other type of elevator. It is not applicable to the following types of products: — remote control devices; — lifting nubbins; — lifting plugs; — lifting subs; — internal gripping devices; — equipment for lifting tubular from and onto a vessel; — elevator links or bails. This list is not exhaustive. This document is not applicable to powered elevators manufactured before the date of this publication. NOTE Annex A provides the relation between the clauses of the European Directive on machinery (Directive 2006/42/EC) and this document, for potential significant hazards and the safety requirements dealing with them for powered elevators.

Petroleum, petrochemical and natural gas industries - Safety of machineries - Powered elevators

CSA C22.2 No.301-2023 工业电机

1 Scope 1.1 This Standard applies to industrial electrical machinery comprising interconnected mechanical, electrical, or electronic equipment, including industrial robots and industrial robotic equipment operating in a co-ordinated manner. Notes: 1) Examples of industrial electrical machinery covered by this Standard include handling and assembly machines, machines for packaging, factory automation machines, and inspection machines, as well as machine tools and machines for woodworking. 2) This equipment is sometimes referred to as a skid. 1.2 This Standard applies to equipment a) rated at not more than 1000 V ac or 1500 V dc; and b) intended to be installed and used in non-hazardous locations in accordance with the Canadian Electrical Code, Part I. 1.3 This Standard applies to equipment that is a) permanently installed; b) mobile; c) relocatable; or d) self-powered. 1.4 The equipment covered by this Standard is intended for use in an ambient temperature between 0 °C and 40 °C. 1.5 This Standard does not specify additional and special requirements for electrical equipment that a) is intended for use in open air (i.e., outside buildings or other protective structures); b) will use, process, or produce potentially explosive material (e.g., paint or sawdust); c) is intended for use in potentially explosive and/or flammable atmospheres; d) has special risks when producing or using certain materials; or e) is intended for use in mines. 1.6 This Standard does not apply to portable equipment connected by a cord and plug and operated by hand as covered by CSA C22.2 No. 71.1. 1.7 This Standard does not apply to self-propelled work platforms or on-road vehicular machineries. 1.8 This Standard does not apply to motor-operated appliances or equipment covered by CSA C22.2 No. 68 for household, commercial cord-connected, industrial cord-connected, rechargeable battery-operated, or permanently connected use. 1.9 This Standard does not specify additional and special requirements that can apply to electrical welding equipment within the scope of CSA C22.2 No. 60 or CSA/CAN-E60974-1. 1.10 This Standard may be used to supplement but does not replace requirements that already exist in a published CSA component standard. 1.11 In this Standard, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the Standard; “should” is used to express a recommendation or that which is advised but not required; and “may” is used to express an option or that which is permissible within the limits of the Standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.

Industrial electrical machinery

T/STS 01-2023 工业锅炉房安全管理规范

规范顺德区工业锅炉房安全管理。主要包括1.锅炉房设置方面的要求；2.锅炉房工艺布置方面的要求；3.锅炉房安全管理通用要求

Industrial Boiler Room Safety Management Code

ISO/CD 24142:2023 饲料加工厂机械安全要求

Safety requirements for machinery in feed processing mills

T/QGCML 1067-2023 防夹手伸缩梯

本文件规定了防夹手伸缩梯的功能尺寸、技术要求、试验方法、检验方法和标志、包装、运输及贮存。 本文件适用于防夹手伸缩梯（不包括带有延伸元件的梯子）。

Anti-hand pinch telescopic ladder