13.110 机械安全 标准查询与下载

ISO 13849-1 机械安全 控制系统的安全相关部分 第1部分：设计的一般原则

Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design

ISO/FDIS 13855 机械安全 人体接近防护措施的定位

Safety of machinery — Positioning of safeguards with respect to the approach of the human body

T/CASME 339-2023 印染水洗装置安全管理规范

本文件规定了印染水洗装置安全管理规范的总体要求、设计、制造、安装、改造、修理、使用管理和定期检验。

Specification for printing and dyeing water washing device safety management

23/30433103 DC BS EN IEC 62046 机械安全 应用防护设备检测人员存在

BS EN IEC 62046. Safety of machinery. Application of protective equipment to detect the presence of persons

EN ISO 19085-12:2021/A11:2023 木工机械.安全.第12部分：张紧/仿形机床 包含修改件A11,2023

Woodworking machines - Safety - Part 12: Tenoning/profiling machines (ISO 19085-12:2021)

IEC 60825:2023 激光产品的安全 所有部分

Safety of laser products - ALL PARTS

IEC 60204:2023 机械安全 机器电气设备 所有部件

Safety of machinery - Electrical equipment of machines - ALL PARTS

T/ZHSE 11-2022 特种设备隐患排查治理实施指南

本文件规定了特种设备隐患排查治理工作的基本要求及隐患排查方法、隐患分解、隐患治理、验收评估、信息管理、持续改进等要求。

Implementation guide for special equipment hidden danger investigation and treatment

KS C IEC 61310-1-2022 机械安全.指示、标记和致动.第1部分:视觉、声音和触觉信号的要求

Safety of machinery — Indication, marking and actuation — Part 1: Requirements for visual, acoustic and tactile signals

KS C IEC 61310-2-2022 机械安全.指示、标记和致动.第2部分:标记要求

Safety of machinery — Indication, marking and actuation — Part 2: Requirements for marking

KS C IEC 61310-1:2022 机械安全.指示、标记和致动.第1部分:视觉、声音和触觉信号的要求

Safety of machinery — Indication, marking and actuation — Part 1: Requirements for visual, acoustic and tactile signals

KS C IEC 61310-2:2022 机械安全.指示、标记和致动.第2部分:标记要求

Safety of machinery — Indication, marking and actuation — Part 2: Requirements for marking

T/ZHSE 10-2022 特种设备安全主体责任落实工作规范

特种设备安全主体责任落实的工作要求

Special Equipment Safety Subject Responsibilities Implementation Work Specifications

EN ISO 23062:2022 铸造机械.成型和制芯机械及相关设备的安全要求

This document deals with foreseeable significant hazards, hazardous situations and events relevant to molding and coremaking machinery and associated equipment when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 5). It provides the requirements to be met by the manufacturer to ensure the safety of persons and property during the life-cycle phases in accordance with ISO 12100:2010, 5.4, as well as in the event of foreseeable failures or malfunctions that can occur in the equipment. This document applies to the following equipment: a) machinery constructed to condition and/or reclaim foundry sands for mold and coremaking (including related moldable granular materials); b) molding machinery; c) coremaking machinery; d) knock-out equipment; e) other directly associated equipment. This document does not apply to: — ladles and pouring equipment; NOTE This equipment is covered within the European Union (EU) by EN 1247:2010. — wax and lost foam pattern production and wax removal equipment; — additive manufacturing equipment; — dust and/or gaseous emissions reduction equipment; — crane installations; — winches; — continuous conveyors or handling systems which can be an integral part of the equipment covered by this document; — sand and casting separation systems. This document does not explicitly deal with electrical hazards. These hazards are covered by IEC 60204-1: 2016

Foundry machinery - Safety requirements for molding and coremaking machinery and associated equipment (ISO 23062:2022)

EN ISO 16090-1:2022 机床安全.加工中心、铣床、转移机.第1部分:安全要求

This document specifies the technical safety requirements and protective measures for the design, construction and supply (including installation and dismantling, with arrangements for transport and maintenance) of: — milling machines (see 3.1.1), including machines capable of performing boring operations (see 3.1.2); — machining centres; and — transfer machines (see 3.1.3) designed for continuous production use, which are intended to cut cold metal and other non-combustible cold materials, except wood or materials with physical characteristics similar to those of wood as defined in ISO 19085‑1 and glass, stone and engineered/agglomerated materials as defined in EN 14618. This document covers the following machines (referred to as "machines" in this document): a) manually, without numerical control, operated boring and milling machines (see 3.2.1, Group 1), e.g. knee and column type milling machines (see Figures C.1 and C.2); b) manually, with limited numerical control, operated boring and milling machines (see 3.2.2, Group 2), e.g. profile and contouring milling machines (see Figures C.3 and C.4); c) numerically controlled milling machines and machining centres (see 3.2.3, Group 3), e.g. automatic milling machines and milling centres, e.g. multi-spindle milling machines, gear-milling machines (see Figures C.5 to C.7); d) transfer and special-purpose machines (see 3.2.4, Group 4), which are designed to process only pre-specified workpieces or limited range of similar workpieces by means of a predetermined sequence of machining operations and process parameters (see Figures C.8 to C.13). e) machines fitted with the following devices/facilities, whose hazards have been dealt with: — tool magazine(s); — tool changer(s); — workpiece handling mechanism(s); — powered workpiece clamping mechanism(s); — swarf/chip conveyor(s); — power-operated door(s); — moveable operator cabin(s); — additional equipment for turning; — additional equipment for grinding. This document deals with all significant hazards, hazardous situations and events relevant to this type of machinery which can occur during transportation, assembly and installation, setting, operation, cleaning and maintenance, troubleshooting, dismantling or disabling according to ISO 12100, when the machinery is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This document presumes accessibility to the machine from all directions and specifies access conditions to operator positions. It also applies to workpiece transfer devices including transport devices for loading/unloading when they form an integral part of the machine.

Machine tools safety - Machining centres, milling machines, transfer machines - Part 1: Safety requirements (ISO 16090-1:2022)

ISO 16090-1:2022 机床安全.加工中心、铣床、转移机.第1部分:安全要求

This document specifies the technical safety requirements and protective measures for the design, construction and supply (including installation and dismantling, with arrangements for transport and maintenance) of: — milling machines (see 3.1.1), including machines capable of performing boring operations (see 3.1.2); — machining centres; and — transfer machines (see 3.1.3) designed for continuous production use, which are intended to cut cold metal and other non- combustible cold materials, except wood or materials with physical characteristics similar to those of wood as defined in ISO 19085-1 and glass, stone and engineered/agglomerated materials as defined in EN 14618. This document covers the following machines (referred to as "machines" in this document): a) manually, without numerical control, operated boring and milling machines (see 3.2.1, Group 1), e.g. knee and column type milling machines (see Figures C.1 and C.2); b) manually, with limited numerical control, operated boring and milling machines (see 3.2.2, Group 2), e.g. profile and contouring milling machines (see Figures C.3 and C.4); c) numerically controlled milling machines and machining centres (see 3.2.3, Group 3), e.g. automatic milling machines and milling centres, e.g. multi-spindle milling machines, gear-milling machines (see Figures C.5 to C.7); d) transfer and special-purpose machines (see 3.2.4, Group 4), which are designed to process only pre-specified workpieces or limited range of similar workpieces by means of a predetermined sequence of machining operations and process parameters (see Figures C.8 to C.13). e) machines fitted with the following devices/facilities, whose hazards have been dealt with: — tool magazine(s); — tool changer(s); — workpiece handling mechanism(s); — powered workpiece clamping mechanism(s); — swarf/chip conveyor(s); — power-operated door(s); — moveable operator cabin(s); 1 — additional equipment for turning; — additional equipment for grinding. This document deals with all significant hazards, hazardous situations and events relevant to this type of machinery which can occur during transportation, assembly and installation, setting, operation, cleaning and maintenance, troubleshooting, dismantling or disabling according to ISO 12100, when the machinery is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This document presumes accessibility to the machine from all directions and specifies access conditions to operator positions. It also applies to workpiece transfer devices including transport devices for loading/unloading when they form an integral part of the machine.

Machine tools safety — Machining centres, milling machines, transfer machines — Part 1: Safety requirements

DB37/T 3080-2022 特种设备作业人员配备要求

Staffing requirements for special equipment operations

DB41/T 2345-2022 在用快开门式压力容器安全使用规范

Code for safe use of in-service quick-opening pressure vessels

T/CSEE 0304-2022 特高压输变电工程施工机具安全技术规范

本文件规定了特高压输变电工程所用施工机具进场、检验、使用、维护等安全技术要求。 本文件适用于交流 1000 kV、直流±800 kV 及以上的输电线路工程、变电站（换流站）工程施工机具的现场安全技术管理。

Safety Technical Specifications for Construction Machinery and Tools in UHV Power Transmission and Transformation Projects

T/PJX 002-2022 机械制造行业职业病预防规范

术语和定义 职业病预防原则和目标 职业病主要危害因素 职业病危害预防措施 职业病危害因素检测

Code of Occupational Disease Prevention in Machinery Manufacturing Industry