13.110 机械安全 标准查询与下载

EN ISO 19085-3:2021 木工机械.安全要求.第3部分:数控（NC）镗铣机

This document gives the safety requirements and measures for numerically controlled (NC/CNC) boring machines, NC/CNC routing machines and NC/CNC boring and routing machines (as defined in 3.2, 3.3 and 3.4), capable of continuous production use, hereinafter referred to as "machines". This document deals with all significant hazards, hazardous situations and events, listed in Annex A, relevant to the machines when they are operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases have been taken into account. This document is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with: — additional working units for sawing, sanding, assembling or dowel inserting; — fixed or movable workpiece support; — mechanical, pneumatic, hydraulic or vacuum workpiece clamping; — automatic tool change devices. It is also applicable to machines fitted with edge-banding equipment, even if the relevant specific hazards have not been dealt with. NOTE For the risk assessment needed for the edge-banding equipment, ISO 19085-17 can be useful. Machines covered in this document are designed for workpieces consisting of: — solid wood; — material with similar physical characteristics to wood (see ISO 19085-1:2021, 3.2); — gypsum boards, gypsum bounded fibreboards, cardboard; — matrix engineered mineral boards, silicate boards; — composite materials with core consisting of polyurethane or mineral material laminated with light alloy; — polymer-matrix composite materials and reinforced thermoplastic/thermoset/elastomeric materials; — aluminium light alloy profiles; — aluminium light alloy plates with a maximum thickness of 10 mm; — composite boards made from the materials listed above. This document does not deal with specific hazards related to: — use of grinding wheels; — ejection through openings guarded by curtains on machines where the height of the opening in the enclosure above the workpiece support exceeds 700 mm; — ejection due to failure of milling tools with a cutting circle diameter equal to or greater than 16 mm and sawing tools not conforming to EN 847‑1:2017 and EN 847‑2:2017; — the combination of a single machine being used with other machines (as a part of a line); — integrated workpiece loading/unloading systems (e.g. robots). This document is not applicable to: — single spindle hand fed or integrated fed routing machines; — machines intended for use in potentially explosive atmosphere; — machines manufactured prior to its publication.

Woodworking machines - Safety - Part 3: Numerically controlled (NC/CNC) boring and routing machines (ISO 19085-3:2021)

EN ISO 19085-14:2021 木工机械.安全.第14部分:四边成型机

This document gives the safety requirements and measures for four-sided moulding machines, capable of continuous production use, with a maximum working width of 350 mm and a maximum speed of the integrated workpiece feed of 200 m/min, hereinafter referred to as “machines”, designed to cut solid wood and materials with similar physical characteristics to wood (see ISO 19085-1:2021, 3.2). It deals with all significant hazards, hazardous situations and events, listed in Annex A, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer; reasonably foreseeable misuse has been considered too. Also, transport, assembly, dismantling, disabling and scrapping phases are taken into account. It is also applicable to machines fitted with one or more of the following devices / additional working units, whose hazards have been dealt with: — universal spindle; — glass bead saw unit; — fixed or movable workpiece support; — quick tool changing system; — laser marking unit; — automatic workpiece returner; — in-feed hopper; — loading magazine; — unloading table. This document does not deal with any hazards related to: a) in-feed devices other than in-feed hopper and loading magazine; NOTE 1 For mechanical in-feed devices which also prevent access to the in-feed opening, see 6.6.4. b) out-feed devices other than unloading table, except for hazards related to ejection from the machine due to climb cutting; c) out-feed of workpieces on machines with feed speed higher than 60 m/min; NOTE 2 Machines with feed speed higher than 60 m/min are usually combined with mechanical unloading and workpiece transfer systems. d) machines being used in combination with any other machine (as part of a line). It is not applicable to machines intended for use in potentially explosive atmosphere and to machines manufactured prior to its publication.

Woodworking machines - Safety - Part 14: Four-sided moulding machines (ISO 19085-14:2021)

EN ISO 19085-15:2021 木工机械.安全.第15部分：压力机

This document gives the safety requirements and measures for stationary manually loaded and unloaded: — cold presses; — hot presses; — bending presses; — edge/face gluing presses; — membrane presses; — embossing presses; where the pressing force is applied by hydraulic actuators pushing two flat or shaped surfaces against each other, hereinafter referred to as "machines". It deals with all significant hazards, hazardous situations and events as listed in Clause 4 relevant to machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases are taken into account. NOTE For relevant but not significant hazards, e.g. sharp edges of the machine frame, see ISO 12100:2010. It is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with: a) device for hot gluing; b) device for high-frequency gluing; c) device for high-frequency shaping; d) automatic work-piece loading and unloading system; e) intermediate additional platens; f) work-piece extractor; g) work-piece clamping pressure beam; h) split moveable platens. The machines are designed to process work-pieces consisting of: 1) solid wood; 2) materials with similar characteristics to wood (see ISO 19085‑1:2017, 3.2); 3) honeycomb board. This document does not deal with any hazards related to: — specific devices that differ from the list above; — hot fluid heating systems internal to the machine other than electrical; — any hot fluid heating systems external to the machine; — operation of taking intermediate platens out and in again; — the combination of a single machine being used with any other machine (as part of a line). It is not applicable to: — frame presses; — membrane presses where the pressing force is applied by vacuum only; — presses for producing chipboard, fibreboard, OSB; — machines intended for use in potentially explosive atmosphere; — machines manufactured before the date of its publication as an international standard.

Woodworking machines - Safety - Part 15: Presses (ISO 19085-15:2021)

ISO 23314-2:2021 船舶和海洋技术.压载水管理系统（BWMS）.第2部分:用电解法对压载水管理系统进行风险评估和降低风险

This document provides requirements and recommendations for designers of BWMS using electrolytic methods to document the risk assessment and risk reduction process over the lifecycle of the equipment, and to support its approval for use on ships by administrations and classification societies. Specifically, this document provides basic terminology, principles and a methodology to identify and subsequently minimize the risk of hazards in the design of BWMS using electrolytic methods. It specifies the procedures for risk assessment and risk reduction following the guidance in ISO 12100. Risks considered include: human health and safety; marine environment related to conditions on board; and ship installation, operation, maintenance and structural integrity. This document does not address the methodology for the risk assessment of corrosion effects, toxicity and ecotoxicity of active substances, relevant chemicals and/or other chemicals generated or used by BWMS using electrolytic methods, which is evaluated by the IMO GESAMP-Ballast Water Working Group as prescribed in the document IMO GESAMP, Methodology for the Evaluation of Ballast Water Management Systems using Active Substances[26]. This document does not address risks associated with the end of life disposition of the BWMS.

Ships and marine technology — Ballast water management systems (BWMS) — Part 2: Risk assessment and risk reduction of BWMS using electrolytic methods

EN ISO 19085-2:2021 木工机械.安全.第2部分:水平梁式圆锯机

This document gives the safety requirements and measures for horizontal beam panel circular sawing machines with the saw carriage of the front cutting line mounted below the workpiece support, which are manually and/or powered loaded and manually unloaded, capable of continuous production use, as defined in 3.1 and hereinafter referred to as “machines”. This document deals with all significant hazards, hazardous situations and events as listed in Annex A, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases have been taken into account. It is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with: — side pressure device; — device for powered unloading; — unit for scoring; — unit for post-formed/soft-formed edge pre-cutting; — panel turning device; — front side turn table; — pushing out device; — pneumatic clamping of the saw blade; — powered panel loading device; — device for grooving by milling tool; — one or more additional cutting lines inside the machine for longitudinal and/or head cut (before the transversal cutting line); — workpiece vacuum clamping as part of a front side turn table or of a panel loading device; — panel pusher; — independent panel pushers; — additional panel pushers mounted on the panel pusher carriage; — additional panel pusher with integrated label printer device; — lifting platform; — device for automatic loading of thin panels; — device for base board unloading by gravity; — device for base board powered unloading; — device for panel unloading in limited space condition; — loading or pre-loading roller conveyors; — pressure beam with additional flaps to increase dust extraction efficiency; — saw blade cooling system by air or water-air or oil-air; — vibrating conveyor with/without trimming unit for offcuts management; — predisposition for top loading/unloading by an external system directly on the machine table and/or on the machine preloading roller conveyor and/or on the machine lifting table. NOTE base board is a support panel underlying the panel stack, to protect the panels from damages during transportation. The machines are designed for cutting panels consisting of: a) solid wood; b) material with similar physical characteristics to wood (see ISO19085‑1:2021, 2); c) gypsum boards, gypsum bounded fibreboards; d) composite materials, with core consisting of e.g. polyurethane or mineral material, laminated with light alloy; e) cardboard; f) foam board; g) matrix engineered mineral boards, silicate boards; h) polymer‐matrix composite materials and reinforced thermoplastic/thermoset/elastomeric materials; i) aluminium light alloy plates with a maximum thickness of 10 mm; j) composite boards made from the materials listed above. This document does not deal with hazards related to: — specific features different from those listed above; — the machining of panels with milling tools for grooving; — powered unloading of panels; — rear half of split pressure beam on the front cutting line; — the combination of a single machine being used with any other machine (as part of a line). It is not applicable to: — machines intended for use in potentiall

Woodworking machines - Safety - Part 2: Horizontal beam panel circular sawing machines (ISO 19085-2:2021)

OENORM EN ISO 19353:2021 机械安全 防火和防火（ISO 19353:2019）

Safety of machinery - Fire prevention and fire protection (ISO 19353:2019)

BS EN 415-11:2021 包装机的安全 效率和可用性的确定

Safety of packaging machines. Determination of efficiency and availability

OENORM EN ISO 19085-12:2021 木工机械 安全 第12部分：开榫机/仿形机（ISO 19085-12:2021）

Woodworking machines - Safety - Part 12: Tenoning/profiling machines (ISO 19085-12:2021)

T/AASE Z001-2021 特种设备使用单位安全标准化准则

本文件规定了特种设备使用单位安全标准化的通用要求、特殊要求和安全管理评价。

Safety standardization specification of special equipment's user

DS/IEC TS 60204-34:2021 机械安全《机械电气设备》第34部分：机床要求

Safety of machinery – Electrical equipment of machines – Part 34: Requirements for machine tools

ISO 19085-15:2021 木工机械.安全.第15部分：压力机

This document gives the safety requirements and measures for stationary manually loaded and unloaded: — cold presses; — hot presses; — bending presses; — edge/face gluing presses; — membrane presses; — embossing presses; where the pressing force is applied by hydraulic actuators pushing two flat or shaped surfaces against each other, hereinafter referred to as "machines". It deals with all significant hazards, hazardous situations and events as listed in Clause 4 relevant to machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases are taken into account. NOTE For relevant but not significant hazards, e.g. sharp edges of the machine frame, see ISO 12100:2010. It is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with: a) device for hot gluing; b) device for high-frequency gluing; c) device for high-frequency shaping; d) automatic work-piece loading and unloading system; e) intermediate additional platens; f) work-piece extractor; g) work-piece clamping pressure beam; h) split moveable platens. The machines are designed to process work-pieces consisting of: 1) solid wood; 2) materials with similar characteristics to wood (see ISO 19085-1:2017, 3.2); 3) honeycomb board. This document does not deal with any hazards related to: — specific devices that differ from the list above; — hot fluid heating systems internal to the machine other than electrical; — any hot fluid heating systems external to the machine; — operation of taking intermediate platens out and in again; — the combination of a single machine being used with any other machine (as part of a line). It is not applicable to: — frame presses; — membrane presses where the pressing force is applied by vacuum only; — presses for producing chipboard, fibreboard, OSB; — machines intended for use in potentially explosive atmosphere; — machines manufactured before the date of its publication as an international standard.

Woodworking machines - Safety - Part 15: Presses

DIN IEC/TS 62998-1:2021 机械安全 用于保护人员的安全相关传感器（IEC TS 62998-1:2019）

This Technical Specification gives requirements for the development and integration of safety related sensors (SRS) and safety related sensor systems (SRSS) used for protection of persons with special attention to systematic capabilities.

Safety of machinery - Safety-related sensors used for the protection of persons (IEC TS 62998-1:2019)

PN-EN ISO 20607-2019-08 P 机械安全 使用手册 一般起草原则（ISO 20607:2019）

Safety of machinery -- Instruction handbook -- General drafting principles (ISO 20607:2019)

JIS C 1010-2-201:2021 测量, 控制和实验室使用电气设备的安全要求. 第2-201部分: 控制设备的特殊要求

Safety requirements for electrical equipment for measurement, control, and laboratory use -- Part 2-201: Particular requirements for control equipment

T/ZQCSH 023-2021 汽车4S店修理车间安全要求

1  范围 2  规范性引用文件 3  术语和定义 4  基本要求 5  常规操作安全 6  防火安全 7  设备设施安全 8  保养与维护

Automobile 4S shop repair workshop safety requirements

T/ZQCSH 024-2021 汽车4S店安全检查要求

1  范围　 2  规范性引用文件　 3  术语和定义　 4  原则　 5  职责　 6  安全检查形式和内容　 7  信息归档　

Automobile 4S store safety inspection requirements

PN-EN ISO 19085-1-2021-09 E 木工机械 安全 第1部分：通用要求（ISO 19085-1:2021）

Woodworking machines -- Safety -- Part 1: Common requirements (ISO 19085-1:2021)

PN-EN ISO 19085-12-2021-09 E 木工机械 安全 第12部分：开榫机/仿形机（ISO 19085-12:2021）

Woodworking machines -- Safety -- Part 12: Tenoning/profiling machines (ISO 19085-12:2021)

EC 1-2021 UNI EN ISO 19353:2021 机械安全防火防火

Safety of machinery - Fire prevention and fire protection

DS-håndbog 193:2021 电气装置设计指南 特别关注 TT、TN 和 IT 安装中的故障保护

Guidance on the design of electrical installations. With special focus on fault protection in TT, TN and IT installations