17.180.20 颜色和光的测量 标准查询与下载

GSO ISO 11664-2:2021 比色法 第2部分：CIE 标准光源

ISO 11664-2:2007 comprises ISO 10526:2007 and ISO 10526:2007/Cor.1:2008. Its technical content is identical to that of ISO 10526:2007. ISO 10526:2007/Cor.1:2008 changes the reference number of the standard from 10526 to 11664-2. ISO 11664-2:2007 specifies two illuminants for use in colorimetry. The illuminants are the CIE standard illuminant A and the CIE standard illuminant D65.

Colorimetry — Part 2: CIE standard illuminants

GSO ASTM C1649:2021 镀膜和未镀膜平板玻璃颜色的仪器透射率测量的标准实施规程

1.1 This practice provides guidelines for the instrumental transmittance measurement of the color of coated and uncoated transparent glass. See Terminology E284. 1.2 The practice specifically excludes fluorescent and iridescent samples. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Instrumental Transmittance Measurement of Color for Flat Glass, Coated and Uncoated

GSO ISO 11664-1:2021 比色法 第1部分：CIE 标准比色观察员

ISO 11664-1:2007 comprises ISO 10527:2007 and ISO 10527:2007/Cor.1:2008. Its technical content is identical to that of ISO 10527:2007. ISO 10527:2007/Cor.1:2008 changes the reference number of the standard from 10527 to 11664-1. ISO 11664-1:2007 specifies colour-matching functions for use in colorimetry. Two sets of colour-matching functions are specified: colour-matching functions for the CIE 1931 standard colorimetric observer and colour-matching functions for the CIE 1964 standard colorimetric observer.

Colorimetry — Part 1: CIE standard colorimetric observers

ASTM E2194-14(2021) 金属薄片着色材料多角度颜色测量的标准试验方法

1.1 This test method covers the instrumental requirements, standardization procedures, material standards, and parameters needed to make precise instrumental measurements of the colors of gonioapparent materials. This test method is designed to encompass gonioapparent materials; such as, automotive coatings, paints, plastics, and inks. 1.2 This test method addresses measurement of materials containing metal flake and pigments. The measurement of materials containing metal flakes requires three angles of measurement to characterize the colors of the specimen. The optical characteristics of materials containing pearlescent and interference materials are not covered by this test method. NOTE 1—Data taken by utilizing this test method are for gonioappearance quality control purposes. This procedure may not necessarily supply appropriate data for spatial-appearance or pigment identification. 1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Multiangle Color Measurement of Metal Flake Pigmented Materials

ASTM E2539-14(2021) 干扰颜料多角度颜色测量的标准试验方法

1.1 This test method covers the instrumental requirements and required parameters needed to make instrumental color measurements of thin film interference pigments. This test method is designed to encompass interference pigments used in architectural applications, automobiles, coatings, cosmetics, inks, packaging, paints, plastics, printing, security, and other applications. 1.2 Characterization of the optical behavior of materials colored with interference pigments requires measurement at multiple angles of illumination and detection. 1.3 Data taken utilizing this test method are quantitative and are appropriate for quality control of interference pigment color. 1.4 The measurement results are usually expressed as reflectance factors, tristimulus color values, or as CIE L*a*b* color coordinates and color difference. 1.5 The totality of data taken may not be necessary for evaluating mixtures also containing non-interference pigments. The committee is investigating and evaluating the appropriateness of this test method for those materials. It is the responsibility of the users to determine the applicability of this test method for their specific applications. 1.6 Interference pigments are typically evaluated for color and color appearance in a medium, such as paint or ink. The gonioapparent effect depends strongly on the physical and chemical properties of the medium. Some of the properties affecting color and color appearance include vehicle viscosity, thickness, transparency, and volume solids. As a general rule, for quality control purposes, interference pigments are best evaluated in a masstone product form. In some cases this product form may be the final product form, or more typically a qualified simulation of the intended product form (such as a paint drawdown) that in terms of color and appearance correlates to final product application. 1.7 This standard does not address the requirements for characterizing materials containing metal flake pigments. Measurements of the optical characteristics of materials containing metal flake pigments are described in Test Method E2194. 1.8 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.10 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. 1 This test method is under the jurisdiction of ASTM Committee E12 on Color and Appearance and is the direct responsibility of Subcommittee E12.12 on Gonioapparent Color. Current edition approved June 1, 2021. Published June 2021. Originally approved in 2008. Last previous edition approved in 2017 as E2539 – 14 (2017). DOI: 10.1520/E2539-14R21. Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. 1 2. Referenced Documents

Standard Test Method for Multiangle Color Measurement of Interference Pigments

ASTM E991-21 用单色仪法测量荧光样品颜色的标准实施规程

1.1?This practice applies to the instrumental color measurement of fluorescent specimens excited by near ultraviolet and visible radiation that results in fluorescent emission within the visible range. It is not intended for other types of photoluminescent materials such as phos

Standard Practice for Color Measurement of Fluorescent Specimens Using the One-Monochromator Method

ASTM F1252-21 透明材料光学反射率的标准测试方法

1.1?This test method covers a procedure for measuring the reflectivity of transparent materials, hereafter known as specimens. The results are repeatable without specifying a particular brand name of instrumentation. 1.2?This test method applies to substantially flat parts. Err

Standard Test Method for Measuring Optical Reflectivity of Transparent Materials

ANSI/ESTA E1.54-2021 娱乐照明中的色彩传达用ESTA标准

ESTA Standard for Color Communication in Entertainment Lighting

ASTM D2392-15(2021) 染色航空汽油颜色的标准测试方法

1.1 This test method covers the determination of the acceptability of color of dyed aviation gasolines. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see Annex A1. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Color of Dyed Aviation Gasolines

ASTM E972-96(2021) 使用阳光的板材太阳光光度透射率的标准测试方法

1.1 This test method covers the measurement of solar photometric transmittance of materials in sheet form. Solar photometric transmittance is measured using a photometer (illuminance meter) in an enclosure with the sun and sky as the source of radiation. The enclosure and method of test is specified in Test Method E1175 (or Test Method E1084). 1.2 The purpose of this test method is to specify a photometric sensor to be used with the procedure for measuring the solar photometric transmittance of sheet materials containing inhomogeneities in their optical properties. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Solar Photometric Transmittance of Sheet Materials Using Sunlight

CIE 243-2021 道路照明和车辆照明中的不适眩光

Discomfort Glare in Road Lighting and Vehicle Lighting

PNS ASTM E1347:2021 用三刺激比色法测量颜色和色差的标准试验方法

Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry

ASTM D2244-21 用于计算彩色公差和色差与仪器测量颜色坐标的标准实践

1.1 This practice covers the calculation, from instrumentally measured color coordinates based on daylight illumination, of color tolerances and small color differences between opaque specimens such as painted panels, plastic plaques, or textile swatches. Where it is suspected that the specimens may be metameric, that is, possess different spectral curves though visually alike in color, Practice D4086 should be used to verify instrumental results. The tolerances and differences determined by these procedures are expressed in terms of approximately uniform visual color perception in CIE 1976 CIELAB opponent-color space (1)2 , CMC tolerance units (2), CIE94 tolerance units (3), the DIN99 color difference formula given in DIN 6176 (4), or the CIEDE2000 color difference units (5). 1.2 For product specification, the purchaser and the seller shall agree upon the permissible color tolerance between test specimen and reference and the procedure for calculating the color tolerance. Each material and condition of use may require specific color tolerances because other appearance factors, (for example, specimen proximity, gloss, and texture), may affect the correlation between the magnitude of a measured color difference and its commercial acceptability. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates

KS A 0065-2020 表面颜色目视比较方法

Methods of visual comparison for surface colours

KS A 0012-2020 光源颜色名称

Names of light-source colours

KS A 0064-2020 颜色术语词汇表

Glossary of colour terms

KS A 0063-2020 不透明材料色差规范方法

Method for specification of colour differences for opaque materials

KS A 0068-2020 光源颜色测量方法

Methods of colour measurement for light sources

KS A 0114-2020 光源变化同色异谱程度评价方法

Evaluation method of degree of metamerism for change in illuminants

KS A 0089-2020 近白色不透明材料的白度 规定方法

Whiteness of near-white opaque materials — Specifying method