21.040.01 螺纹综合 标准查询与下载

ANSI/ASME B1.5-1997 ACME 螺纹

This standard provides specifications, formulas, and tables relating to Acme screw threads.

Acme Screw Threads

ASME B18.24.1-1996 B18外螺纹产品领部件识别号(PIN)编码系统标准

Provides all users with the capability to identify externally threaded fastener products by a preselected order of coding.

Part identifying number (pin) code system standard for B18 externally threaded products

JIS B 1054:1995 耐腐蚀的不锈钢紧固件的规范

Specification for corrosion-resistant stainless steel fasteners

JIS B 1053:1995 钢位定位螺钉的机械性能

Mechanical properties of steel set screws

JIS B 1057:1994 有色金属紧固件的机械性能

Mechanical properties of non-ferrous metal fasteners

JIS B 1014:1994 埋头平顶螺钉.第2部分:十字凹槽贯穿深度

この規格は，皿頭ねじ十字穴のゲージ沈み深さのシリーズI (深形)及びシリーズ2(浅形)の系列について規定する。

Countersunk flat head screws -- Part 2: Penetration depth of cross recesses

JIS B 1013:1994 埋头螺钉.头部外形和测量

この規格は，すりわり付き及び十字穴付き皿頭ねじの頭部形状の特性について規定するとともに，各ねじ部品規格で規定する皿頭寸法に関するゲージによる検査方法を推奨するものである。

Countersunk head screws -- Head configuration and gauging

ASME B1.3M Errata-1994 螺纹测量体系的可接受尺寸.英制和米制螺纹(UN,UNR,UNJ,M和MJ).勘误表

Screw thread gaging systems for dimensional acceptability - Inch and metric screw threads (UN, UNR, UNJ, M, and MJ); Errata

ASME B1 TECH REPT-1993 测量误差为60度的螺纹量规参数的测量(米制和英制)

This Report provides estimates of uncertainty associated with the measurement of pitch diameter, lead and flank angle only for screw thread gages. It is intended that these estimates will be used as a guide to resolve measurement disputes arising between any two parties calibrating the same gage

Measurement Uncertainty for 60 Deg. Screw Thread Gage Element Measurement (Inch and Metric)

ASME B1-1993 60度测量误差螺纹量规参数的测量(英制和公制)

Measurement uncertainty for 60 deg. screw thread gage element measurement (inch and metric)

ASME B1/TR-1993 60度测量误差米制和英制螺纹量规参数的测量

This report provides estimates of uncertainty associated with the measurement of pitch diameter, lead and flank angle only for screw thread gages. It is intended that these estimates will be used as a guide to resolve measurement disputes arising between any two parties calibrating the same gage.

Measurement uncertainty for 60 deg. screw thread gage element measurement (inch and metric)

JIS B 0271:1992 螺纹测量用三量针

Three wires for screw thread measuring

JIS B 0261:1992 平行螺纹量规的测量方法

Measuring method for parallel screw gauges

ANSI/ASME B1.3M-1992 英制和米制(UN, UNR,UNJ, M, and MJ)螺纹的尺寸验收用测量系统

Presents screw thread gaging systems suitable for determining the acceptability of UN, UNR, UNJ, M, and MJ screw threads on externally and internally threaded products. It establishes the criteria for screw thread acceptance when a gaging system is used.

Screw Thread Gaging Systems for Dimensional Acceptability - Inch and Metric Screw Threads (UN, UNR, UNJ, M, and MJ)

ASME B1.3M-1992 螺纹测量体系的可接受尺寸.英制和米制螺纹(UN,UNR,UNJ,M和MJ)

This Standard presents screw thread gaging systems suitable for determining the acceptability of UN, UNR, UNJ, M, and MJ screw threads on externally and internally threaded products. It establishes the criteria for screw thread acceptance when a gaging system is used. (B) A screw thread gaging system comprises a list of screw thread characteristics that must be inspected to establish the dimensional acceptability of the screw threads on a threaded product and the gage(s) which shall be used when inspecting those characteristics. (C) FEDERAL GOVERNMENT USE. When this Standard is approved by the Department of Defense and federal agencies and is incorporated into FED-STD-H28/20, Screw Thread Standards for Federal Services, Section 20, the use of this Standard by the federal government is subject to all the requirements and limitations of FED-STD-H28/20.

Screw thread gaging systems for dimensional acceptability - Inch and metric screw threads (UN, UNR, UNJ, M, and MJ)

JIS B 1091:1991 紧固件.验收检验

Fasteners -- Acceptance inspection

JIS B 1084:1990 螺纹紧固件的紧固试验方法

Method of tightening test for threaded fasteners

JIS B 1083:1990 螺纹紧固件的紧固总则

この規格は，ボルト?ナットの組合せによるねじ締付けの意義，締付けの基礎及び代表的な締付け管理方法に関する一般的事項について規定する。なお，この規格は，ボルト?ナット以外のねじ部品による締付け及びねじ部品と構造体のねじとを組み合わせた締付けに対しても準用することができる。ただし，おねじ部品に圧縮力を与える止めねじ類及びおねじ部品自体でねじ立てをする木ねじ，タッピンねじ類並びに特別な戻り止め機能を付与したねじ部品の締付けに対しては適用できない。

General rules for tightening of threaded fasteners

GOST 28487-1990 钻架构件锁紧锥度螺纹.牙型.尺寸.公差

Tool-joint tapered thread for drill string elements. Profile. Dimensions. Tolerances

ANSI/ASME B1.8-1988 短梯形螺纹

When formulated prior to 1895, regular Acme screw threads were intended to replace square threads and a variety of threads of other forms used chiefly for the purpose of producing traversing motions on machines, tools, etc. For current information on Acme threads, see the latest edition of ASME/ANSI B1.5. The Stub Acme thread came into being early in the 1900s. Its use has been generally confined to those unusual applications where a coarse-pitch thread of shallow depth is required due to mechanical or metallurgical considerations. Federal Government Use. When this Standard is approved by the Department of Defense and Federal Agencies and is incorporated into FED-STD H28/13,Screw Thread Standards for Federal Services, Section 13, the use of this Standard by the Federal Government is subject to all the requirements and limitations of FED-STD H28/13.

Stub Acme Screw Threads