21.060.30 垫圈、锁紧件 标准查询与下载

JIS B 1022:2008 紧固件公差.第3部分:螺栓、螺钉和螺母用平垫圈.产品等级A和C

この規格は，ねじの呼び径1-150 mmのボルト。小ねじ及びナットに用いるプレス打抜きによる平座金に対する部品等級A及びCの公差について規定する。

Tolerances for fasteners -- Part 3: Plain washers for bolts, screws and nuts -- Product grades A and C

JIS B 1256:2008 平垫圈

This Standard specifies the circular plain washers (hereafter referred to as "plain washers") made of steel and stainless steel used for bolts, screws and nuts of general use. When requiring the dimensions of washers other than those specified in the text of this Standard, the reference dimensions should be selected from those in JIS B 1250 and the tolerances should be selected from those in JIS B 1022. The shape and dimensions of square washer is shown in Annex JA as reference. NOTE: The International Standards corresponding to this Standard are as fol- lows. ISO 7089: 2000 Plain washers- Normal series- Product grade A ISO 7090: 2000 Plain washers, chamfered- Normal series-- Product grade A ISO 7091: 2000 Plain washers- Normal series -- Product grade C ISO 7092: 2000 Plain washers- Sma]] series- Product grade A ISO 7093-1:2000 Plain washers- Large series- Part I: Product grade A ISO 7093-2: 2000 Plain washers -- Large series -- Part 2 .' Product grade U ISO 7094: 2000 Plain washers- Extra large series- Product grade U (Overall evaluation: MOD) In addition, symbols which denote the degree of correspondence in the contents between the relevant International Standards and JIS are IDT (identical). MOD (modified), and NEQ (not equivalent) according to ISO/IEC Guide 21.

Plain washers

JIS B 1250:2008 米制普通螺栓、螺钉和螺母用平垫圈.一般示意图

この規格は，ねじの呼び径1-150mmの一般用ポルト，小ねじ及びナツトに用いる部品等級A及びCの平座金の基準寸法について規定する。

Plain washers for metric bolts, screws and nuts for general purposes -- General plan

ANSI/ASME B18.21.3-2008 木结构用复式圆弹簧锁紧垫圈

This standard covers the dimensional, physical properties, and methods of testing for double coil helical spring lock washers for wood structures.

Double Coil Helical Spring Lock Washers for Wood Structures

ASME B18.21.3-2008 木结构用复式螺旋弹簧锁紧垫圈

This Standard covers the dimensional and physical properties and methods of testing for double coil helical spring lock washers for wood structures.

Double Coil Helical Spring Lock Washers for Wood Structures

ASTM F844-07a 垫圈 钢 平原标准规范

Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use

AIA/NAS NASM20230-2007 I类和III类有垫圈普通卷边金属扣眼 修订1

GROMMET, METALLIC, PLAIN AND ROLLED RIM, WITH WASHER, TYPE I AND TYPE III Rev 1

GROMMET, METALLIC, PLAIN AND ROLLED RIM, WITH WASHER, TYPE I AND TYPE III Rev 1

DLA MS51971 REV C-2007 UNC-2B型300系列钝化耐腐蚀六边形钢螺母

The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil.

NUT, PLAIN, HEXAGON-STEEL, CORROSION RESISTING, 300 SERIES, PASSIVATED, UNC-2B

AECMA PREN 6094-2007 航空航天系列.垫圈弹簧埋头钉.P2版

This draft is now available for public comment and your views and technical comments on it would be appreciated. If you have no specific comments to make hut find it generally acceptable it would be helpful if you would notify US accordingly. Suggestions entailing revision of the text should indicate the preferred wording. Please quote the relevant clause number against any comment.

Aerospace series Washer, spring, countersunk Edition P 2

DIN 6319 Berichtigung 1:2007 锥形座球面垫圈.DIN 6319-2001的技术勘误

Spherical washers, conical seats, Corrigenda to DIN 6319:2001-10

ASTM F844-07 通用未淬火扁平钢垫圈的标准规范

1.1 This specification covers round and miscellaneous shape steel plain (flat) washers furnished in an unhardened condition. 1.2 The washers are intended for general use bolt, nut, and stud applications to provide increased bearing surface, spacing, and to prevent galling. 1.3 Unless otherwise specified, the washers are furnished with dimensions conforming to B18.22.1, Type A, Tables 1A and Tables 1B. 1.4 Hardened washers for use with heat-treated structural bolts are covered by Specifications F 436 and F 436M.

Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use

GJB 5862.2-2006 不锈钢弹簧垫圈 第2部分：轻型弹簧垫圈

本部分规定了轻型不锈钢弹簧垫圈的尺寸和要求。 本部分适用于轻型不锈钢弹簧垫圈的制造与验收。

Stainless steel helical spring washers Part 2: Light type helical spring washers

GJB 5862.1-2006 不锈钢弹簧垫圈 第1部分：标准型弹簧垫圈

本部分规定了标准型不锈钢弹簧垫圈的尺寸和要求。 本部分适用于标准型不锈钢弹簧垫圈的制造与验收。

Stainless steel helical spring washers Part 1: Normal type helical spring washers

GJB 5862.3-2006 不锈钢弹簧垫圈 第3部分：重型弹簧垫圈

本部分规定了重型不锈钢弹簧垫圈的尺寸和要求。 本部分适用于重型不锈钢弹簧垫圈的制造与验收。

Stainless steel helical spring washers Part 3: Heavy type helical spring washers

GJB 5861-2006 不锈钢弹簧垫圈通用规范

本规范规定了不锈钢弹簧垫圈（以下简称弹簧垫圈）的技术要求、质量保证规定和交货准备等。 本规范适用于弹簧垫圈的制造与验收。

General specification for stainless steel helical spring washers

DLA MS9684 REV A VALID NOTICE 2-2006 AMS 5510型防锈钢杯状锁定垫圈

MS9684A, dated 19 September 2001, remains inactive for new design; however, the document is valid for use

WASHER, CUP, LOCK - CRES AMS 5510

DLA MS9081 REV B VALID NOTICE 3-2006 AMS 6350型轴承制动双键垫圈

MS9081B, dated 19 September 2001, remains inactive for new design; however, the document is valid for use.

WASHER, KEY-DOUBLE, BEARING RETAINING, AMS 6350

DLA MS9768 REV B VALID NOTICE 3-2006 AMS 5525或 AMS 5737型埋头钻防锈钢垫圈

MS9768B, dated 19 September 2001, remains inactive for new design; however, the document is valid for use.

WASHER, FLAT-CRES AMS 5525 OR AMS 5737, COUNTERSUNK

DLA MS9274 REV B VALID NOTICE 3-2006 AMS 5510型支座固定双键垫圈

MS9274B, dated 19 September 2001, remains inactive for new design; however, the document is valid for use.

WASHER, KEY-DOUBLE, BEARING RETAINING, AMS 5510

DLA MS19069 REV A VALID NOTICE 2-2006 灯系列球形和圆筒形轴承制动键垫圈

MS19069A, dated 14 September 2001, has been reviewed and determined to be valid for use in acquisition.

WASHER, KEY, RETAINING, BALL AND ROLLER BEARING, LIGHT SERIES