21.060.30 垫圈、锁紧件 标准查询与下载

KS B ISO 10673:2015 螺栓垫圈和垫圈组件.小号、标准和大号系列.产品级别A

Plain washers for screw and washer assemblies — Small, normal and large series — Product grade A

DIN EN 14399-6:2015 预加负荷用高强度结构螺栓组件.第6部分:普通倒角垫圈;德文版本EN 14399-6-2015

High-strength structural bolting assemblies for preloading - Part 6: Plain chamfered washers; German version EN 14399-6:2015

DIN EN 14399-5:2015 预加负荷用高强度结构螺栓组件.第5部分:平垫圈;德文版本EN 14399-5-2015

High-strength structural bolting assemblies for preloading - Part 5: Plain washers; German version EN 14399-5:2015

BS EN 14399-5:2015 用于预载的高强度结构螺栓组件 平垫圈

High-strength structural bolting assemblies for preloading. Plain washers

BS EN 14399-6:2015 用于预载的高强度结构螺栓组件 平倒角垫圈

High-strength structural bolting assemblies for preloading. Plain chamfered washers

EN 14399-6:2015 预负载高强度结构螺栓组件.第6部分:普通倒角垫圈

This European Standard specifies, together with EN 14399-1 and EN 14399-2, hardened and tempered chamfered plain washers with chamfer intended for bolting assemblies with large series hexagon high-strength structural bolts and nuts with thread sizes from M12 to M36 inclusive. Washers according to this standard are not intended to be used in direct contact with oversized or slotted holes. NOTE Attention is drawn to the importance of ensuring that the washers are correctly used if satisfactory results are to be obtained. For recommendations concerning proper application, reference to EN 1090-2 is made.

High-strength structural bolting assemblies for preloading - Part 6: Plain chamfered washers

EN 14399-5:2015 预负载用高强度结构螺栓连接组件.第5部分:平垫圈

This European Standard specifies, together with EN 14399-1 and EN 14399-2, hardened and tempered plain washers intended for bolting assemblies with large series hexagon high-strength structural bolts and nuts with threads from M12 to M36 inclusive. Washers according to this standard can be applied under the nut only. Washers according to this standard are not intended to be used in direct contact with oversized or slotted holes. NOTE Attention is drawn to the importance of ensuring that the washers are correctly used if satisfactory results are to be obtained. For recommendations concerning proper application, reference to EN 1090-2 is made.

High-strength structural bolting assemblies for preloading - Part 5: Plain washers

GOST ISO 4759-3-2015 紧固件. 公差. 第3部分. 螺栓, 螺钉, 螺柱和螺母用平垫圈. A级和C级产品

Fasteners. Tolerances. Part 3. Plain washers for bolts, screws and nuts. Product grades A and C

KS R 2034-2013 汽车用垫圈 齿形锁紧垫圈、波形垫圈

Washers for automobiles－Toothed lock washer and waved washer

GSO ISO 4759-3:2013 紧固件公差 第3部分：螺栓、螺钉和螺母用平垫圈 产品等级 A 和 C

This part of ISO 4759 establishes a selection of tolerances for use in the preparation of ISO product standards for punched plain washers of product grades A and C, for use with bolts, screws and nuts of nominal thread diameters of from 1 mm to 150 mm inclusive. It is recommended that these tolerances also be used for non-standard washers.

Tolerances for fasteners -- Part 3: Plain washers for bolts, screws and nuts -- Product grades A and C

GSO ISO 10673:2013 用于螺钉和组件的简单金属垫圈 小型、常规和大型系列 A 级产品

The International Standard specifies the characteristics of plain steel washers, small, normal and large series, of product grade A for metric screw and washer assemblies in accordance with ISO 10644.

Plain washers for screw and washer assemblies -- Small, normal and large series -- Product grade A

GSO ISO 8738:2013 钩销用简易金属垫圈—A级产品

This International Standard specifies the characteristics of plain washers for clevis pins according to ISO 2340 and ISO 2341. Plain washers in accordance with this International Standard shall be used on the cotter pin end only.

Plain washers for clevis pins -- Product grade A

GSO ISO 10644:2013 带平垫圈的钢制螺钉和垫圈组件 垫圈硬度等级 200 HV 和 300 HV

This International Standard specifies the requirements for metric screw and plain washer assemblies made of steel with coarse thread M2 to M12 inclusive, flat seating heads, property classes up to and including 10.9 and washer hardness classes 200 HV or 300 HV. The plain washers are captive, i.e. prevented from disassembly and free to rotate.

Screw and washer assemblies made of steel with plain washers -- Washer hardness classes 200 HV and 300 HV

GSO ISO 7089:2013 平垫圈 普通系列 A级产品

This International Standard specifies the characteristics of normal-series, product-grade-A plain washers in the 200 HV and 300 HV hardness classes and of nominal sizes (nominal thread diameters) ranging from 1,6 mm to 64 mm inclusive. Washers of hardness class 200 HV are suitable for hexagon bolts and screws of product grades A and B in property classes up to and including 8.8; hexagon nuts of product grades A and B in property classes up to and including 8; hexagon bolts, screws and nuts of stainless steel of similar chemical composition; case-hardened thread rolling screws. Washers of hardness class 300 HV are suitable for hexagon bolts and screws of product grades A and B in property classes up to and including 10.9; hexagon nuts of product grades A and B in property classes up to and including 10. If dimensions other than those listed in this International Standard are required, they should be selected from those given in ISO 887. When soft material pieces are clamped, or large clearance holes in the workpiece are used, the user should check the technical suitability of this type of washer

Plain washers -- Normal series -- Product grade A

GSO ISO 7093-1:2013 简单金属环 大序列 第1部分：A 级产品

This part of ISO 7093 specifies the characteristics of large-series, product-grade-A plain washers in the 200 HV and 300 HV hardness classes and of nominal sizes (nominal thread diameters) ranging from 3 mm to 36 mm inclusive. Washers conforming to this part of ISO 7093 are intended for use in cases where soft material pieces are to be clamped or where there are large clearance holes in the workpiece. Nevertheless, in the latter case, the suitability of the washer thickness should be checked. Washers of hardness class 200 HV are suitable for — hexagon bolts and screws of product grades A and В in property classes up to and including 8.8; — hexagon nuts of product grades A and В in property classes up to and including 8; — hexagon bolts, screws and nuts of stainless steel of similar chemical composition; — case-hardened thread rolling screws. Washers of hardness class 300 HV are suitable for — hexagon bolts and screws of product grades A and В in property classes up to and including 10.9; — hexagon nuts of product grades A and В in property classes up to and including 10. If dimensions other than those listed in this part of ISO 7093 are required, they should be selected from those given in ISO 887.

Plain washers -- Large series -- Part 1: Product grade A

GSO ISO 887:2013 用于公制螺栓、螺钉和通用螺母的简单垫圈 总平面图

This International Standard specifies the full range of the nominal dimensions of product-grade-A and -C plain washers for general-purpose bolts, screws and nuts of nominal thread diameters ranging from 1 mm to 150 mm inclusive. This International Standard is not applicable to washers for screw and washer assemblies in relation to hole diameters and thicknesses. Information on the use of plain washers is given in annex A.

Plain washers for metric bolts, screws and nuts for general purposes -- General plan

GSO ISO 7090:2013 简单斜角索环 常规系列 A级产品

This International Standard specifies the characteristics of normal-series, product-grade-A plain washers chamfered at the outside diameter, in the 200 HV and 300 HV hardness classes and of nominal sizes (nominal thread diameters) ranging from 5 mm to 64 mm inclusive. Washers of hardness class 200 HV are suitable for bolts and screws of product grades A and B in property classes up to and including 8.8; nuts of product grades A and B in property classes up to and including 8; bolts, screws and nuts of stainless steel of similar chemical composition; case-hardened thread rolling screws. Washers of hardness class 300 HV are suitable for bolts and screws of product grades A and B in property classes up to and including 10.9; nuts of product grades A and B in property classes up to and including 10. If dimensions other than those listed in this International Standard are required, they should be selected from those given in ISO 887. When soft material pieces are clamped, or large clearance holes in the workpiece are used, the user should check the technical suitability of this type of washer.

Plain washers, chamfered -- Normal series -- Product grade A

GSO ISO 7092:2013 平垫圈 小系列 A级产品

This International Standard specifies the characteristics of small-series, product-grade-A plain washers in the 200 HV and 300 HV hardness classes and of nominal sizes (nominal thread diameters) ranging from 1,6 mm to 36 mm inclusive. Washers of hardness class 200 HV are suitable for cheese head screws in property classes up to and including 8.8, or made of stainless steel; hexagon socket head cap screws in property classes up to and including 8.8, or made of stainless steel; hexalobular socket head cap screws in property classes up to and including 8.8, or made of stainless steel; case-hardened thread rolling screws with cheese heads. Washers of hardness class 300 HV are suitable for hexagon socket head cap screws in property classes up to and including 10.9; hexalobular socket head cap screws in property classes up to and including 10.9. If dimensions other than those listed in this International Standard are required, they should be selected from those given in ISO 887. When soft material pieces are clamped, or large clearance holes in the workpiece are used, the user should check the technical suitability of this type of washer

Plain washers -- Small series -- Product grade A

GSO ISO 10669:2013 自攻螺钉和垫圈组件用平垫圈 普通和大系列 产品等级A

This International Standard specifies the characteristics of plain steel washers of product grade A for tapping screw and washer assemblies in accordance with ISO 10510.

Plain washers for tapping screw and washer assemblies -- Normal and large series -- Product grade A

GSO ISO 7091:2013 平垫圈 普通系列 产品等级C

This International Standard specifies the characteristics of normal-series, product-grade-C plain washers in the 100 HV hardness class and of nominal sizes (nominal thread diameters) ranging from 1,6 mm to 64 mm inclusive. Washers of hardness class 100 HV are suitable for hexagon bolts and screws of product grade C in property classes up to and including 6.8; hexagon nuts of product grade C in property classes up to and including 6; case-hardened thread rolling screws. If dimensions other than those listed in this International Standard are required, they should be selected from those given in ISO 887. When soft material pieces are clamped, or large clearance holes in the workpiece are used, the user should check the technical suitability of this type of washer

Plain washers -- Normal series -- Product grade C