21.060.30 垫圈、锁紧件 标准查询与下载

AECMA PREN 6090-2006 航空航天系列.垫圈.P1版

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

Aerospace series Washer, retaining Edition P 1

DIN EN ISO 887:2006 通用米制螺栓、螺钉和螺母用的平垫圈.一般示意图(ISO 887:2000 + Cor. 1:2006)

The project specifies the basic dimensions of plain washer for bolts, screws and nuts.#,,#

Plain washers for metric bolts, screws and nuts for general purposes - General plan (ISO 887:2000 + Cor. 1:2006) English version of DIN EN ISO 887:2000 + AC:2006-07

DIN EN 14399-5:2006 预加负荷用高强度结构螺栓组件.第5部分:平垫圈

This standard specifies requirements for plain washers, which are used for high strength structural bolting assemblies for preloading.#,,#

High-strength structural bolting assemblies for preloading - Part 5: Plain washers (includes AC:2006) English version of DIN EN 14399-5:2006-06

DIN EN 14399-6:2006 预加负荷用高强度结构螺栓组件.第6部分:普通倒角垫圈

High-strength structural bolting assemblies for preloading - Part 6: Plain chamfered washers (includes Corrigendum AC:2006) English version of DIN EN 14399-6:2006-06

LST EN 14399-5-2005/AC-2006 预加载高强度结构螺栓组件 第5部分：平垫圈

High-strength structural bolting assemblies for preloading - Part 5: Plain washers

LST EN 14399-6-2005/AC-2006 预紧用高强度结构螺栓组件 第6部分：倒角平垫圈

High-strength structural bolting assemblies for preloading - Part 6: Plain chamfered washers

DS/EN 14399-6/AC:2006 预紧用高强度结构螺栓组件 第6部分：倒角平垫圈

This standard specifies, together with EN 14399-1, hardened and tempered plain washers with chamfer intended for assembly with large series hexagon high-strength structural bolts and nuts with thread sizes from M12 to M36 inclusive.

High-strength structural bolting assemblies for preloading - Part 6: Plain chamfered washers

DS/EN ISO 887/AC:2006 一般用途的公制螺栓、螺钉和螺母用平垫圈 总图

This International Standard specifies the full range of the nominal dimensions of product-grade-A and -C plain washers for general-purpose bolts, screws and nuts of nominal thread diameters ranging from 1 mm to 150 mm inclusive.

Plain washers for metric bolts, screws and nuts for general purposes - General plan

DS/EN 14399-5/AC:2006 预加载高强度结构螺栓组件 第5部分：平垫圈

This standard specifies, together with EN 14399-1, hardened and tempered plain washers intended for assembly with large series hexagon high-strenght structural bolts and nuts with threads from M12 to M36 inclusive. Washers according to this standard can be applied under the nut only.

High-strength structural bolting assemblies for preloading - Part 5: Plain washers

JIS B 1130:2006 带普通垫圈的螺钉和垫圈组件.垫圈强度等级为200 HV和300 HV.

この規格は，頭部座面が平らで，強度区分10.9以下，M2 ～M12のねじに，硬さ区分200 HV又は300 HVの平座金を組み込んだ平座金組込みねじの要求事項について規定する。平座金は，組込み後，ねじから脱落せずに自由に回転するものとする。

Screw and washer assemblies with plain washers -- Washer hardness classes 200 HV and 300 HV

JIS B 1258:2006 螺钉用平垫圈和垫圈组件.小型、标准型和大型系列.A级产品

この規格は，JIS B 1130に規定する平座金組込みねじに用いる。部品等級Aの小形，並形及び大形系列で，硬さ区分200 HV及び300 HVの鋼製平座金(以下，座金という。)の特性について規定する。

Plain washers for screw and washer assemblies -- Small, normal and large series -- Product grade A

DLA MIL-DTL-24211 B (1)-2006 波导法兰垫圈的一般规定

This specification covers the general requirements for pressure sealing gaskets used with general purpose cover flanges and flat face flanges covered by MIL-DTL-3922.

GASKETS, WAVEGUIDE FLANGE GENERAL SPECIFICATION FOR

DLA MS26577 REV C-2006 飞行器信号识别灯座垫圈

MATERIAL: HEAT-RESISTANT SILICONE RUBBER, CLASS 2A, GRADE 60, PER A-A-59588.

GASKET, AIRPORT MARKER LIGHT BASE

EN ISO 887:2000/AC:2006 通用米制螺栓,螺钉和螺母用平垫圈.一般示意图 包含修改件AC,2006

Plain washers for metric bolts, screws and nuts for general purposes - General plan (ISO 887:2000)

DLA MS28783 REV F-2006 聚四氟乙烯裱环形垫圈

The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil

RING GASKET, BACK-UP, PTFE

GOST R 52646-2006 高强螺栓金属结构用垫圈.规范

Washers for high-strength bolts metal structures. Specifications

AECMA PREN 6089-2006 航空航天系列.垫圈大头钉用法EN 6088.P2版

This standard specifies the dimensions, tolerances, required characteristics and mass of a retaining washer for use in fuselage interior equipment and structural applications. This standard shall be used in conjunction with stud per EN 6088 and circlip per EN 6091.

Aerospace series Washer, retaining, for usage with stud EN 6088 Edition P 2

KS B ISO 7090-2005(2020) 倒角平垫圈.标准系列.产品等级A

Plain washers, chamfered－Normal series－Product grade A

KS B ISO 7089-2005(2020) 平垫圈.标准系列.产品等级A

Plain washers－Normal series－Product grade A

KS B ISO 7089:2005 平垫圈.标准系列.产品等级A级

이 규격은 경도 구분 200 HV와 300 HV이고, 호칭 치수(호칭 나사 지름)가 1.6

Plain washers－Normal series－Product grade A