23.040.70 软管和软管组件 标准查询与下载
共找到 1335 条与 软管和软管组件 相关的标准，共 89 页
Fabric reinforced drain hoses and hose assemblies
- ICS
- 23.040.70
- CCS
- 发布
- 2021-11-16
- 实施
- 2022-02-16
Rubber and plastics hoses and hose assemblies -- Determination of resistance to vacuum (ISO 7233:2021)
- ICS
- 23.040.70
- CCS
- 发布
- 2021-10-27
- 实施
- 2021-10-27
Rubber and plastics hoses and hose assemblies -- Hydrostatic testing (ISO 1402:2021)
- ICS
- 23.040.70
- CCS
- 发布
- 2021-10-20
- 实施
- 2021-10-20
Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2021)
- ICS
- 23.040.70
- CCS
- 发布
- 2021-10-01
- 实施
- 2021-10-01
This International Standard specifies two methods for measuring the stiffness and one method for determination of the flexibility of rubber or plastic hoses or tubing when they are bent to a specific radius at sub-ambient temperatures. Method A is suitable for non-collapsible hos
Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2021); German version EN ISO 10619-2:2021
- ICS
- 23.040.70
- CCS
- 发布
- 2021-10-00
- 实施
Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures
- ICS
- 23.040.70
- CCS
- 发布
- 2021-09-30
- 实施
- 2021-09-30
Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2021)
- ICS
- 23.040.70
- CCS
- 发布
- 2021-09-30
- 实施
- 2021-09-30
本文件规定了气体充装软管的技术要求、试验方法、检验规则及标志、包装、储运、使用。 本文件适用于工业气体、燃气、高纯气体、电子气体、食药级气体、消防气体以及其他特种气体的单一气体、混合气体的充装和供应。
Safety technical requirements for gases filling hoses
- ICS
- 23.040.70
- CCS
- C342
- 发布
- 2021-09-28
- 实施
- 2022-05-07
本文件规定了家用电器耐压进水软管（以下简称“软管”）的术语和定义、基本要求、技术要求、试验方法、检验规则、标识、包装、运输及贮存和质量承诺。 本文件适用于以食品级聚氯乙烯树脂为主要原料，加入一定的加工助剂，经挤出并嵌入纤维丝网层的塑料软管及其相配套的接头，主要应用于洗衣机、洗碗机等家用电器的进水。
Pressure—resistant inlet hose for household appliances
- ICS
- 23.040.70
- CCS
- C292
- 发布
- 2021-09-06
- 实施
- 2021-09-29
Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:2021)
- ICS
- 23.040.70
- CCS
- 发布
- 2021-09-01
- 实施
- 2021-09-01
Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar
- ICS
- 23.040.70
- CCS
- 发布
- 2021-09-00
- 实施
- 2021-09-01
Rubber and plastics hoses - Determination of volumetric expansion (ISO/FDIS 6801:2021)
- ICS
- 23.040.70
- CCS
- 发布
- 2021-09-00
- 实施
Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness. Bending tests at sub-ambient temperatures
- ICS
- 23.040.70
- CCS
- G33
- 发布
- 2021-08-27
- 实施
- 2021-08-27
Hose assemblies for liquefied petroleum gas
- ICS
- 23.040.70
- CCS
- 发布
- 20210825
- 实施
- 20210825
Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum (ISO 7233:2021)
- ICS
- 23.040.70
- CCS
- 发布
- 2021-08-15
- 实施
- 2021-08-15
Hose fittings with clamp units - Part 7: Cam locking couplings
- ICS
- 23.040.70
- CCS
- 发布
- 2021-08-01
- 实施
- 2021-08-01
Hose fittings with clamp units - Part 4: Flange connections
- ICS
- 23.040.70
- CCS
- 发布
- 2021-08-01
- 实施
- 2021-08-01
Rubber hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 1403:2019)
- ICS
- 23.040.70
- CCS
- 发布
- 2021-08-00
- 实施
- 2021-08-01
This document specifies methods for the hydrostatic testing of rubber and plastics hoses and hose assemblies, including methods for the determination of dimensional stability.
Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:2021); German version EN ISO 1402:2021
- ICS
- 23.040.70
- CCS
- 发布
- 2021-08-00
- 实施
