25.080.20 镗床和铣床 标准查询与下载

JB/T 2254.1-2011 坐标镗床.第1部分：精度检验

JB/T 2254的本部分规定了坐标镗床的几何精度、定位精度、工作精度的检验项目、方法和公差。 本部分适用于工作台面宽度小于或等于2000mm的M级和P级精度等级的单柱和双柱坐标镗床。

Jig boring machines.Part 1:Testing of the accuracy

JB/T 8332.1-2011 重型深孔钻镗床.第1部分：精度检验

JB/T 8332的本部分规定了一般用途和普通精度的重型深孔钻镗床的预调检验、几何精度和工作精度检验以及相应的公差。 本部分适用于最大铣孔直径250mm～1000mm、最大镗孔深度为3000mm～20000mm的工件主轴箱固定型和移动型的重型深孔钻镗床。

Heavy duty deep hole drilling & boring machines.Part 1:Testing of the accuracy

JB/T 8331-2011 万能回转头铣床.精度检验

本标准规定了万能回转头铣床的几何精度和工作精度的要求及检验方法。 本标准适用于工作台面宽度200㎜～500㎜一般用途的普通精度万能回转头铣床。

Testing of the accuracy for Universal rotary head milling machines

GOST IEC 61029-2-8-2011 移动式电动工具.单芯轴垂直模压机试验方法和安全性的详细要求

Electric transportable tools. Particular safety requirements and methods of testing single spindle vertical moulders

DIN EN 61029-2-8:2010 便携式电动工具的安全性.第2-8部分:单芯轴垂直模压机的详细要求(IEC 61029-2-8-1995,修改件+A1-1999+A2-2001).德文版本EN 61029-2-8-2010

Safety of transportable motor-operated electric tools - Part 2-8: Particular requirements for single spindle vertical moulders (IEC 61029-2-8:1995, modified + A1:1999 + A2:2001); German version EN 61029-2-8:2010

KS B 4211-2010 床身立式铣床性能及精度试验规范

Test code for performance and accuracy of bed type vertical milling machines

KS B 4209-2010 床身卧式铣床性能及精度试验规程

Test code for performance and accuracy ofbed type horizontal milling machines

KS B ISO 1701-0-2010 膝式卧式或立式铣床 第0部分：概述

Knee type horizontal or vertical milling machines－Part 0：General introduction

KS B 4033-2010 膝式立式铣床 精度检测

Knee type vertical milling machines－Testing of the accuracy

KS B ISO 1701-0:2010 膝式卧式或立式铣床 第0部分：概述

Knee type horizontal or vertical milling machines-Part 0:General introduction

KS B 4403-2010 双柱式平面铣床 精度测试

Double column type plano - milling machines - Testing of the accuracy

JIS B 6210-2:2010 带有水平主轴的镗床和铣床的精确度试验用试验条件.第2部分:带有可移动床身和固定工作台的机床

Test conditions for testing the accuracy of boring and milling machines with horizontal spindle -- Part 2: Machines with movable column and fixed table

JIS B 6210-1:2010 带有水平主轴的镗床和铣床的精确度试验用试验条件.第1部分:带有固定式床身和可移动工作台的机床

Test conditions for testing the accuracy of boring and milling machines with horizontal spindle -- Part 1: Machines with fixed column and movable table

JIS B 6210-3:2010 带有水平主轴的镗床和铣床的精确度试验用试验条件.第3部分:带有可移动床身和可移动工作台的机床

Test conditions for testing the accuracy of boring and milling machines with horizontal spindle -- Part 3: Machines with movable column and movable table

LST EN 13128-2002+A2-2009/AC-2010 机床安全-铣床（包括镗床）

Safety of machine tools - Milling machines (including boring machines)

DS/EN 13128+A2/AC:2010 机床安全-铣床（包括镗床）

This standard specifies the technical safety requirements and measures to be adopted by persons undertaking the design, construction and supply (including installation and dismantling, with arrangements for transport and maintenance) of milling machines (see 3.1) including machines capable of performing boring operations (see 3.5).

Safety of machine tools - Milling machines (including boring machines)

KS B ISO 3070-0:2009 卧式主轴镗铣床验收条件锛峳精度检测锛峆art 0锛欣一般介绍

Acceptance conditions for boring and milling machines with horizontal spindle－Testing of the accuracy－Part 0：General introduction

LST EN 13128-2002+A2-2009 机床安全-铣床（包括镗床）

Safety of machine tools - Milling machines (including boring machines)

DIN EN 13128:2009 机床安全性.铣床(包括镗孔机)(含修改件A2-2009).英文版本DIN EN 13128-2009-09

1.1 This standard specifies the technical safety requirements and measures to be adopted by persons undertaking the design, construction and supply (including installation and dismantling, with arrangements for transport and maintenance) of milling machines (see 3.1) including machines capable of performing boring operations (see 3.5). Machines covered by this standard include but are not limited to: -- knee and column type milling machines (see figures C.1, C.2); -- bed-type milling machines (see figure C.3); -- multi-spindle milling machines (see figures C.4 and C.5); -- piano-milling machines (see figures C.4 and C.5); -- profile and contouring milling machines (see figure C.6), -- milling and boring machines (see figure C.7). 1.2 This standard takes account of intended use including reasonably foreseeable misuse, maintenance, cleaning, and setting operations. It presumes access to the machine from all directions. It describes means to reduce risks to operators and other exposed persons. 1.3 This standard also applies to workpiece transfer devices when they form an integral part of the machine. 1.4 This standard deals with significant hazards relevant to milling machines when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). 1.5 Hazards arising from other metal working processes (e.g. grinding, turning, forming, EDM, laser processing) are covered by other standards (see Bibliography). 1.6 Milling machines with automatic tool changing capabilities are not covered by this standard (see prEN 12417:1996). 1.7 This standard is not applicable to milling machines which were manufactured before the date of publication by CEN of this standard.

Safety of machine tools - Milling machines (including boring machines)(includes Amendment A2:2009); English version of DIN EN 13128:2009-09

DS/EN 13128+A2:2009 机床安全-铣床（包括镗床）

This standard specifies the technical safety requirements and measures to be adopted by persons undertaking the design, construction and supply (including installation and dismantling, with arrangements for transport and maintenance) of milling machines (see 3.1) including machines capable of performing boring operations (see 3.5).

Safety of machine tools - Milling machines (including boring machines)