25.080.20 镗床和铣床 标准查询与下载

JB/T 11568-2013 五轴联动高架横梁移动龙门铣床 技术条件

本标准规定了五轴联动高架横梁移动龙门铣床的设计、制造和验收要求。本标准适用于工作台面宽度1 000 mm~3 000 mm的具有五个数控轴线,即三个线性轴线(X、Y、Z)和两个回转轴线(A、C)或(B、C)的五轴联动高架横梁移动龙门铣床。

Five-axis simultaneous control plano-milling machines with a traveling overhead cross rail.Specifications

JB/T 4241.2-2013 卧式铣镗床 第2部分:主轴端部

JB/T 4241的本部分规定了卧式铣镗床的镗轴及铣轴的端部结构及尺寸。本部分适用于主轴直径小于或等于130 mm的一般用途的卧式铣镗床。

Boring and milling machines with horizontal spindle.Part 2: Spindle nose

JB/T 11567-2013 数控万能回转头铣床 精度检验

本标准规定了数控万能回转头铣床的几何精度检验、定位精度检验和工作精度检验的要求及检验方法。本标准适用于工作台面宽度200 mm~500 mm一般用途的数控万能回转头铣床(以下简称手动回转铣头)。

CNC Universal rotary head milling machines.Testing of the accuracy

JB/T 2255.2-2013 坐标镗床转台 第2部分:技术条件

JB/T 2255的本部分规定了坐标镗床转台的制造和验收要求。本部分适用于转台台面直径小于或等于1500 mm的坐标镗床所用M级和P级精度等级的水平转台和万能转台。

Jig boring machines rotary table.Part 2: Specifications

JB/T 11569.1-2013 五轴联动雕刻加工中心 第1部分:精度检验

JB/T 11569的本部分规定了五轴联动雕刻加工中心的几何精度检验、定位精度检验和工作精度检验的要求及检验方法。本部分适用于线性行程≤1200 mm的普通级和精密级五轴联动雕刻加工中心。

The 5-axes simultaneous engraving machine centers.Part 1: Testing of the accuracy

JB/T 4289.3-2013 立式精镗床 第3部分:型式与参数

JB/T 4289的本部分规定了立式精镗床的型式与参数。本部分适用于新设计的一般用途的立式精镗床。

Vertical fine boring machine.Part 3: Types and parameters

KS B 4009-2013 机床振动试验方法

Methods of vibration testing for machine tools

KS B 4219-2013 高精度转塔和单轴坐标钻床和镗床的测试条件，带有固定高度的工作台，垂直主轴

Test conditions for high accuracy turret and single spindle coordinate drilling andboring machines with table of fixed height with vertical spindle－Testing of the accuracy－Part 1：Single column type machines

KS B 4424-2013 数控膝式枪钻机性能及精度试验规程

Test code for performance and accuracy of computerized numerically control knee type gun drilling machines

KS B 4223-2013 数控卧式镗床性能及精度检验规程（台式）

Test code for performance and accuracy of numericallycontrolled horizontal boring machines(Table type)

KS B ISO 6545:2013 凿轮滚齿机.精确度试验

Gear hobbing machines－Testing of the accuracy

KS B ISO 6545-2013 滚齿机精度检验

Gear hobbing machines－Testing of the accuracy

KS B ISO 3070-1:2013 机床.卧式镗铣床的精度试验条件.第1部分:固定式机床和可移动工作台机床

Machine tools-Test conditions for testing the accuracy of boring and milling machines with horizontal spindle-Part 1:Machines with fixed column and movable table

KS B ISO 3070-2:2013 机床.卧式镗铣床的精度试验条件.第2部分:台式机床

Machine tools-Test conditions for testing the accuracy of boring and milling machines with horizontal spindle-Part 2:Machines with movable column and fixed table

KS B ISO 3070-3:2013 机床.卧式镗铣床的精度试验条件.第3部分:可拆卸固定工件夹具平台的板形机械

Machine tools-Test conditions for testing the accuracy of boring and milling machines with horizontal spindle-Part 3:Machines with movable column and movable table

GSO ISO 1984-2:2013 具有固定高度工作台的手动控制铣床的测试条件 精度测试 第2部分：垂直轴机床

This part of ISO 1984 specifies, with reference to ISO 230-1, both geometric and machining tests on general purpose and normal-accuracy milling machines with table of fixed height and with a vertical spindle. It also specifies the applicable tolerances corresponding to the above-mentioned tests. This part of ISO 1984 deals only with the verification of the geometric accuracy of the machine. It does not apply to the testing of the machine operation (vibrations, abnormal noises, stick-slip motion of components, etc.), nor to checking of its characteristics (speeds, feeds, etc.), which should generally be checked before testing the accuracy. This part of ISO 1984 defines the terminology used for the principal elements of the machine and indicates the designation of axes in accordance with ISO 841[1].

Test conditions for manually controlled milling machines with table of fixed height - Testing of the accuracy -- Part 2: Machines with vertical spindle

GSO ISO 1701-1:2013 具有可变高度工作台的铣床的测试条件 精度测试 第1部分：具有水平轴的机床

This part of ISO 1701 specifies, with reference to ISO 230-1, both geometric and machining tests on general purpose, normal accuracy, horizontal-spindle milling machines with table of variable height. It also specifies the applicable tolerances corresponding to the above-mentioned tests.

Test conditions for milling machines with table of variable height -- Testing of the accuracy -- Part 1: Machines with horizontal spindle

GSO ISO 1984-1:2013 具有固定高度工作台的手动控制铣床的试验条件 精度测试 第I部分：水平轴机床

This part of ISO 1984 specifies, with reference to ISO 230-1, both geometric and machining tests on general purpose and normal-accuracy milling machines with table of fixed height and with a horizontal spindle. It also specifies the applicable tolerances corresponding to the above-mentioned tests. This part of ISO 1984 deals only with the verification of the geometric accuracy of the machine. It does not apply to the testing of the machine operation (vibrations, abnormal noises, stick-slip motion of components, etc.), nor to the checking of its characteristics (speeds, feeds, etc.), which should generally be checked before testing accuracy. This part of ISO 1984 defines the terminology used for the principal elements of the machine and indicates the designation of axes in accordance with ISO 841[1].

Test conditions for manually controlled milling machines with table of fixed height - Testing of the accuracy -- Part 1: Machines with horizontal spindle

GSO ISO 1701-2:2013 具有可变高度工作台的铣床的测试条件 精度测试 第2部分：立轴机床

This part of ISO 1701 specifies, with reference to ISO 230-1, both geometric and machining tests on general purpose, normal accuracy, vertical-spindle milling machines with table of variable height. It also specifies the applicable tolerances corresponding to the above-mentioned tests

Test conditions for milling machines with table of variable height -- Testing of accuracy -- Part 2: Machines with vertical spindle

GSO ISO 3070-1:2013 机床 卧式镗铣床精度试验条件 第1部分：定柱移动工作台机床

This part of ISO 3070 specifies, with reference to ISO 230-1, ISO 230-2 and ISO 230-7, geometric tests, machining tests, spindle tests and tests for checking the accuracy and repeatability of positioning by numerical control of general purpose, normal accuracy, horizontal spindle boring and milling machines having a fixed column and movable table. This part of ISO 3070 also specifies the applicable tolerances corresponding to these tests. This type of machine can be provided with spindle heads of different types, such as those with sliding boring spindle and milling spindle, sliding boring spindle and facing head, or ram or milling ram. This part of ISO 3070 concerns machines having both longitudinal (Z-axis) and transverse (X-axis) movement of the table, a vertical movement of the spindle head (Y axis), movement of the boring spindle or ram (W axis) and, possibly, a feed movement of radial facing slide in the facing head (U axis), and that may include a rotary or indexing table

Machine tools -- Test conditions for testing the accuracy of boring and milling machines with horizontal spindle -- Part 1: Machines with fixed column and movable table