25.120.10 锻压设备、冲压机、剪切机 标准查询与下载
共找到 1961 条与 锻压设备、冲压机、剪切机 相关的标准，共 131 页
Multi-link toggle-type cold extrusion presses Part 2: Technical conditions
- ICS
- 25.120.10
- CCS
- J62
- 发布
- 2021-12-02
- 实施
- 2022-04-01
Orbital fully hydraulic forging operating machine
- ICS
- 25.120.10
- CCS
- J62
- 发布
- 2021-12-02
- 实施
- 2022-04-01
Cylinder-operated rapid forging hydraulic press
- ICS
- 25.120.10
- CCS
- J62
- 发布
- 2021-12-02
- 实施
- 2022-04-01
Multi-link toggle cold extrusion press Part 1: Basic parameters
- ICS
- 25.120.10
- CCS
- J62
- 发布
- 2021-12-02
- 实施
- 2022-04-01
本文件规定了圆柱形电池壳智能冲压设备的基本参数、基本要求、技术要求、试验方法、检验规则、包装、标志与运输、贮存、随机技术文件及质量承诺。 本文件适用于机身为闭式、传动型式为机械驱动的圆柱形电池壳智能冲压设备（以下简称“冲压设备”）。
Intelligent stamping equipment for cylindrical battery shell
- ICS
- 25.120.10
- CCS
- C342
- 发布
- 2021-10-28
- 实施
- 2022-01-12
Tools for pressing. Gas springs. Gas springs with increased spring force and same built height
- ICS
- 25.120.10
- CCS
- 发布
- 2021-10-07
- 实施
- 2021-10-07
Tools for pressing - Gas springs - Part 4 : gas springs with increased spring force and same built height
- ICS
- 25.120.10
- CCS
- J62
- 发布
- 2021-10-01
- 实施
- 2021-10-01
本文件规定了闭式多工位压力机的基本要求、技术要求、试验方法、检验规则、标志、标牌、包装、运输、贮存和随机技术文件、质量承诺。 本文件适用于冲压金属板料零件的闭式多工位压力机(以下简称压力机)。 本文件不适用于锻造压力机及特殊结构的专用压力机。
Straight-side transfer press
- ICS
- 25.120.10
- CCS
- C342
- 发布
- 2021-09-01
- 实施
- 2021-09-23
Tools for pressing－Round punches with 60° conical head and reduced shank
- ICS
- 25.120.10
- CCS
- 发布
- 20210831
- 实施
- 20210831
Tools for pressing－Guide posts and guide bushes
- ICS
- 25.120.10
- CCS
- 发布
- 20210831
- 实施
- 20210831
Tools for pressing－Round punches with 60˚conical head and straight shank
- ICS
- 25.120.10
- CCS
- 发布
- 20210831
- 实施
- 20210831
Tools for pressing ― Punches with cylindrical head and straight or reduced shank
- ICS
- 25.120.10
- CCS
- 发布
- 20210831
- 实施
- 20210831
Tools for pressing. Gas springs. Gas spring with increased spring force and compact built height
- ICS
- 25.120.10
- CCS
- J26
- 发布
- 2021-08-25
- 实施
- 2021-08-25
This document specifies the dimensions (in millimetres), nominal initial forces and types of gas springs. It is applicable to gas springs with increased spring force and same built height of type 7500 to 200000, pressurized with nitrogen with a nominal initial force of between 7400 N (with a tolerance of ±5 %) and 200000 N (with a tolerance of ±5 %), for use in press tools. It also specifies marking, technical delivery conditions and designation. NOTE Specifications of mounting accessories for gas springs are given in ISO 11901-2.
Tools for pressing — Gas springs — Part 4: Gas springs with increased spring force and same built height
- ICS
- 25.120.10
- CCS
- 发布
- 2021-08-16
- 实施
This document specifies the dimensions (in millimetres), nominal initial forces and types of gas springs. It is applicable to gas springs with increased spring force and compact built height of type 1700 to 200000, pressurized with nitrogen with a nominal initial force of between 1700 N (with a tolerance of ±5 %) and 200000 N (with a tolerance of ±5 %), for use in press tools. It also specifies marking, technical delivery conditions and designation. NOTE Specifications of mounting accessories for gas springs are given in ISO 11901-2.
Tools for pressing - Gas springs - Part 3: Gas spring with increased spring force and compact built height
- ICS
- 25.120.10
- CCS
- J32
- 发布
- 2021-08-00
- 实施
本标准规定了剪切机用厚刀片（以下简称“刀片”）的材料、硬度、机械加工的要求及试验方法。 本标准的技术内容分为7章，包括：范围、规范性引用文件、型号与规格、要求、试验方法、检验规则和标志、包装、运输与贮存。 （1）关于“范围” 金属厚板料剪切刀片市场需求量较大，尤其在轧钢生产企业，我国是钢铁生产大国，为了满足市场的需求，制定本标准。本标准适用于剪切25mm～60mm厚的金属材料的刀片。 （2）关于“型号与规格” 标准中规定了刀片的型号和常用规格尺寸，以便更好地地解读标准的技术要求。 (3)关于“材料” 根据刀片的工作特点，规定了制造刀片的材料优先采用综合性能较好的GB/T 1299所包含的材料，材料的化学成分和力学性能应符合GB/T 1299的要求。 (4)关于“硬度” 为了保证刀片的耐磨性和剪切性能，规定了刀片的硬度。 (5)关于“机械加工” 为了保证刀片的工作精度，在机械加工中规定了刀片的尺寸精度、形状和位置公差及表面粗糙度。
Blade of think steel plates for slitter
- ICS
- 25.120.10
- CCS
- C342
- 发布
- 2021-06-04
- 实施
- 2022-05-31
