27.040 燃气轮机和蒸汽轮机、蒸汽机 标准查询与下载
共找到 657 条与 燃气轮机和蒸汽轮机、蒸汽机 相关的标准，共 44 页
What is ISO 21905 about? ISO 21905 discusses gas turbine exhaust systems with or without heat recovery. ISO 21905 specifies requirements and gives recommendations for the design, materials of construction, modelling, controlling, fabrication, inspection, testing, installation, start-up and operation of industrial gas turbine (GT) exhaust systems with or without waste heat recovery unit (WHRU). Gas turbines can be on-shore or off-shore for such sectors as oil and gas, chemical and process industries, utilities, or other intensive energy users. For ISO 21905 , the exhaust system means all items in the turbine exhaust gas stream between the GT exhaust gas collector outlet flange and the termination/s to the atmosphere. The following items are not covered by ISO 21905 : heat recovery steam generator equipment (HRSG) supplementary fired systems
Gas turbine exhaust systems with or without waste heat recovery
- ICS
- 27.040
- CCS
- 发布
- 2020-03-31
- 实施
- 2020-03-31
This document specifies requirements and gives recommendations for the design, materials of construction, modelling, controlling, fabrication, inspection, testing, installation, start-up and operation of industrial gas turbine (GT) exhaust systems with or without waste heat recovery unit (WHRU). Gas turbines can be on-shore or off-shore for such sectors as oil and gas, chemical and process industries, utilities, or other intensive energy users. For this document, the exhaust system means all items in the turbine exhaust gas stream between the GT exhaust gas collector outlet flange and the termination/s to the atmosphere. The following items are not covered by this document: — heat recovery steam generator equipment (HRSG); — supplementary fired systems; — auxiliary fired systems; — exhaust gas collector (also known as exhaust plenum); — fire detection and extinguishing systems; — emissions controls equipment intended to modify the gaseous composition of the exhaust gas; — WHRUs that are of the firetube type, where the turbine exhaust gas (TEG) passes through the tubes.
Gas turbine exhaust systems with or without waste heat recovery
- ICS
- 27.040
- CCS
- 发布
- 2020-03-05
- 实施
T/CSEE 0101的本部分规定了汽轮机转子相控阵超声检测一般要求、检测方法和缺陷评定方法。 本部分适用于整锻式汽轮机转子，焊接汽轮机转子、含中心孔汽轮机转子、发电机转子的相控阵超声检测参照本部分执行。
Technical Guidelines for Phased Array Ultrasonic Testing of Power Generation Equipment Part 2
- ICS
- 27.040
- CCS
- D4420
- 发布
- 2020-01-01
- 实施
- 2022-07-13
下列文件对于本文件的应用是必不可少的。凡是注日期的引用文件，仅注日期的版本适用于本文件。凡是不注日期的引用文件，其最新版本（包括所有的修改单）适用于本文件。 GB/T 12604.1-2005 无损检测 术语 超声检测 GB/T 20737-2006 无损检测 通用术语和定义 GB/T 32563 无损检测 超声检测 相控阵超声检测方法 JB/T 8428-2015 无损检测 超声试块通用规范 JJF 1338-2012 相控阵超声探伤仪校准规范
Technical Guidelines for Phased Array Ultrasonic Testing of Power Generation Equipment Part 1:
- ICS
- 27.040
- CCS
- D4420
- 发布
- 2020-01-01
- 实施
- 2022-07-13
本标准规定了在役火电机组承压部件上温度套管管座安全状态的评估条件、评估程序、评分计算、评定等级和评估报告等要求。 本标准适用于在役火电机组集箱、管道、阀体、缸体上的温度套管管座的安全状态评估。承压部件上的疏（放）水管座、排空气管管座、取样管管座以及联接形式类似的管座可参照执行。
Safety status assessment guidelines for thermowell sockets of thermal power units
- ICS
- 27.040
- CCS
- D441
- 发布
- 2020-01-01
- 实施
- 2022-07-13
Technical conditions for pressure-bearing steel castings of nuclear power steam turbines
- ICS
- 27.040
- CCS
- K54
- 发布
- 2019-12-24
- 实施
- 2020-10-01
Steam turbine coating technical conditions
- ICS
- 27.040
- CCS
- K54
- 发布
- 2019-12-24
- 实施
- 2020-10-01
Steam turbine storage and transportation technical conditions
- ICS
- 27.040
- CCS
- K54
- 发布
- 2019-12-24
- 实施
- 2020-10-01
Gas turbines－Procurement－Part 2：Standard reference conditions and ratings
- ICS
- 27.040
- CCS
- 发布
- 20191213
- 实施
- 20191213
Gas turbines－Procurement－Part 7：Technical information
- ICS
- 27.040
- CCS
- 发布
- 20191213
- 实施
- 20191213
Gas turbines－Procurement－Part 9：Reliability, availability, maintainability and safety
- ICS
- 27.040
- CCS
- 发布
- 20191213
- 实施
- 20191213
Gas turbines－Procurement－Part 8：Inspection, testing, installation and commissioning
- ICS
- 27.040
- CCS
- 发布
- 20191213
- 实施
- 20191213
Gas turbines－Procurement－Part 4：Fuels and environment
- ICS
- 27.040
- CCS
- 发布
- 20191213
- 实施
- 20191213
Power Station Valve Maintenance Guidelines Part 1 General Rules
- ICS
- 27.040
- CCS
- F23
- 发布
- 2019-06-04
- 实施
- 2019-10-01
本标准规定了汽轮机焊接隔板的相控阵超声检测方法和检测结果的评定。 本标准适用于汽轮机焊接隔板制造、安装及检修过程中主焊缝的相控阵超声检测。 本标准不适用于奥氏体钢制焊接隔板的检测
Technical Guidelines for Phased Array Ultrasonic Testing of Power Generation Equipment Part 4: Welded Diaphragms for Steam Turbines
- ICS
- 27.040
- CCS
- D4430
- 发布
- 2019-03-01
- 实施
- 2022-07-13
本标准规定了火电机组管道、阀体、缸体类承压部件上的仪表管座及套管的结构、材料、安装、焊接、检验、使用等要求。 随着火电机组调峰要求提高，高温高压管座及套管角焊缝频繁泄漏，严重影响机组的安全可靠运行，从而引起各发电公司的高度重视。但火电机组高温高压管座、套管角焊缝缺乏系统性的技术要求，各家电厂不知道从哪方面入手管理管座质量，导致其安全管理缺失，管座、套管安全质量处于失控状态。 针对这种情况，中国电机工程学会组织多家单位，对火电机组承压部件上的管座安全质量深入分析，开展了相关试验研究工作，制定了本标准。 仪表管座的安全技术监督是过程控制，过程中每个环节都有可能影响最终的使用安全，因此为了控制管座及套管安全，从管座及套管全生命周期进行全过程管理。基于这种思想，该导则从管座及套管的结构、选材、焊接、检验、维修、改造、运行、管理等多个环节进行约束及风险管控。 对于火电机组承压部件仪表管座，主要有温度测点、压力测点管座。但压力测点、疏（放）水管、排空管、取样管以及其它用途类似联接形式的管座结构形式简单，被温度测点管座的结构形式所包含，因此该导则主要对温度测点管座进行规范，其他管座基本上都可参照执行。
Technical guidelines for instrument sockets of pressure-bearing parts of thermal power units
- ICS
- 27.040
- CCS
- D441
- 发布
- 2019-02-28
- 实施
- 2020-05-08
本标准规定了大中型电站汽轮机冷端系统和设备在设计、运行、检修和技术改造中的通用节能技 术要求。 本标准适用于单台容量125MW级及以上凝汽式汽轮发电机组,其他机组可参照执行
Technical guidelines for energy saving at the cold end of steam turbines in large and medium-sized power stations
- ICS
- 27.040
- CCS
- D441
- 发布
- 2018-12-25
- 实施
- 2022-09-16
本标准规定了燃气轮机控制和保护系统的基本要求以及选用依据。 本标准适用于发电和工业驱动用的重型燃气轮机控制与保护。
Gas turbine - Control and protection system
- ICS
- 27.040
- CCS
- K56
- 发布
- 2018-12-01
- 实施
- 2018-12-01
