29.120.70 继电器 标准查询与下载

GB/T 14598.27-2017/XG1-2019 量度继电器和保护装置 第27部分：产品安全要求 《第1号修改单》

Measuring Relays and Protective Devices Part 27: Product Safety Requirements "No. 1 Amendment"

GSO IEC 60255-1:2024 测量继电器和保护设备 第1部分：通用要求

IEC 60255-1:2022 specifies common rules and requirements applicable to measuring relays and protection equipment, including any combination of equipment to form a distributed protection scheme for power system protection such as control, monitoring and process interface equipment, to obtain uniformity of requirements and tests. This document covers the main technologies in use today; other emerging technologies present specific EMC and safety issues but the philosophy in this document will be applied. This second edition cancels and replaces the first edition published in 2009. This edition includes the following significant technical changes with respect to the previous edition: a. scope of document clarified; b. merging units and communications as an integral part of the protection added; c. binary output clarification expanded; d. environmental operating conditions added (Annex B); e. test reference conditions added; f. multiple changes to improve understanding across most clauses; g. derating by manufacturer added; h. safety and EMC tests removed from document and referenced only; i. relay setting and type test guidelines modified (Annex A) j. battery monitor port and low power instrument transformers added.

Measuring relays and protection equipment - Part 1: Common requirements

GSO IEC 60255-187-1:2024 测量继电器和保护设备 第187-1部分：差动保护的功能要求 电动机、发电机和变压器的受限制和无限制差动保护

IEC 60255-187-1:2021 specifies the minimum requirements for functional and performance evaluation of (longitudinal) differential protection designed for the detection of faults in ac motors, generators and transformers. This document also defines how to document and publish performance test results. This document defines the influencing factors that affect the accuracy under steady state conditions and performance characteristics during dynamic conditions. The test methodologies for verifying performance characteristics and accuracy are also included in this document. This document, together with IEC 60255-187-2 and IEC 60255-187-3, cancels and replaces IEC 60255-13. This document includes the following significant technical changes with respect to IEC 60255-13: a) IEC 60255-13 has been significantly revised to follow the common structure of the functional standards for protection relays (IEC 60255-1xx series). IEC 60255-187-1 has been developed to address the restrained and unrestrained differential protection of motors, generators and transformers. The revisions include detailed description of the functions including the performance specification, testing and documentation requirements. The contents of the corrigendum of April 2023 have been included in this copy.

Measuring relays and protection equipment - Part 187-1: Functional requirements for differential protection - Restrained and unrestrained differential protection of motors, generators and transformers

23/30483635 DC BS EN IEC 63522-56 电气继电器 测试和测量 第56部分 球压测试

BS EN IEC 63522-56. Electrical relays. Tests and Measurements - Part 56. Ball Pressure Test

23/30483568 DC BS EN IEC 60255-167 测量继电器和保护设备 第167部分 定向过流保护的功能要求

BS EN IEC 60255-167 Measuring relays and protection equipment - Part 167. Functional requirements for directional overcurrent protection

23/30478751 DC BS EN IEC 61810-7-3 全有或全无继电器 测试和测量 第7-3部分 继电器线圈特性

BS EN IEC 61810-7-3. All-or-nothing electrical relays. Tests and Measurements - Part 7-3. Relay coil properties

T/QGCML 182-2023 继电保护装置定值区远方修改的技术方法

本文件规定了继电保护装置定值区远方修改的术语和定义、技术要求、遥调方式进行保护装置定值区切换、现场实施步骤、试验方法。 本文件适用于继电保护装置定值区远方修改技术。

Technical method for remote modification of fixed value area of relay protection device

T/QGCML 181-2023 继电保护装置保护信号远方复归的技术方法

本文件规定了继电保护装置保护信号远方复归的术语和定义、遥控、基本要求、继电保护装置远方操作及流程、数据网络系统。 本文件适用于继电保护装置保护信号远方复归技术。

Technical method for remote return of protection signal of relay protection device

T/QGCML 184-2023 应用于冲击性负荷的高压继电保护启动的技术条件

本文件规定了应用于冲击性负荷的高压继电保护启动技术条件的术语和定义、技术要求、试验方法。 本文件适用于冲击性负荷的高压继电保护启动。

Technical conditions for starting high-voltage relay protection applied to impact loads

23/30477973 DC BS EN IEC 60255-27 AMD 1. 测量继电器和保护设备 第27部分 产品安全要求

BS EN IEC 60255-27 AMD 1. Measuring relays and protection equipment - Part 27. Product safety requirements

23/30476729 DC BS EN IEC 61810-7-37 电气继电器 测试和测量 第7-37部分 额定负载时端子温升

BS EN IEC 61810-7-37. Electrical relays. Tests and Measurements - Part 7-37. Terminal temperature rise at rated load

23/30474918 DC BS EN IEC 61810-7-34 电气继电器 测试和测量 第 7-34 部分 流体污染

BS EN IEC 61810-7-34. Electrical relays. Tests and Measurements - Part 7-34. Fluid contamination

23/30474914 DC BS EN IEC 61810-7-33 电气继电器 测试和测量 第 7-33 部分 保护接地连接的连续性

BS EN IEC 61810-7-33. Electrical relays. Tests and Measurements - Part 7-33. Continuity of protective earth connection

23/30474616 DC BS EN IEC 61810-7-28 电气继电器 测试和测量 第 7-28 部分 热电电动势 (emf)

BS EN IEC 61810-7-28. Electrical relays. Tests and Measurement - Part 7-28. Thermoelectric electromotive force (e.m.f.)

23/30448082 DC BS EN IEC 61810-7-16 电气继电器 测试和测量 第 7-16 部分 焊接

BS EN IEC 61810-7-16. Electrical relays. Tests and Measurements - Part 7-16. Soldering

23/30474613 DC BS EN IEC 61810-7-44 电气继电器 测试和测量 第 7-44 部分 腐蚀性气氛 盐雾

BS EN IEC 61810-7-44. Electrical relays. Tests and Measurements - Part 7-44. Corrosive atmosphere. Salt mist

23/30474607 DC BS EN IEC 61810-7-53 电气继电器 测试和测量 第 7-53 部分 电源电压缓慢下降和上升

BS EN IEC 61810-7-53. Electrical relays. Tests and Measurements - Part 7-53. Slow decrease and increase of supply voltage

23/30474617 DC BS EN IEC 61810-7-38 电气继电器 测试和测量 第 7-38 部分 机械联锁

BS EN IEC 61810-7-38. Electrical relays. Testing and Measurement - Part 7-38. Mechanical interlock

23/30474615 DC BS EN IEC 61810-7-27 电气继电器 测试和测量 第 7-27 部分 电接触噪声

BS EN IEC 61810-7-27. Electrical relays. Tests and Measurements - Part 7-27. Electrical contact noise

23/30474608 DC BS EN IEC 61810-7-52 电气继电器 测试和测量 第 7-52 部分 线圈过电压

BS EN IEC 61810-7-52. Electrical relays. Tests and Measurements - Part 7-52. Coil overvoltage