29.220.30 标准查询与下载

GOST R IEC 60622-2010 含碱性或其他非酸性电解液的二次电池和蓄电池.密封镍镉方形可充电单体电池

Secondary cells and batteries containing alkaline or other non-acid electrolytes. Sealed nickel-cadmium prismatic rechargeable single cell

KS C IEC 61982-1:2009 电动道路车辆驱动用蓄电池(非锂).性能和耐久试验

이 표준은 전기자동차의 추진동력으로 사용되는 단전지, 모노블록 및 모듈의 시험에 사용될 전

Secondary batteries for the propulsion of electric road vehicles－Part 1：Test parameters

KS C IEC 61982-1-2009(2014) 电动道路车辆推进用二次电池第1部分:试验参数

Secondary batteries for the propulsion of electric road vehicles－Part 1：Test parameters

ANSI/IEEE 1625:2009 移动计算机用可充电电池标准

This standard establishes criteria for design analysis for qualification, quality, and reliability of rechargeable battery systems for multi-cell mobile computing devices. It also provides methods for quantifying the operational performance of these batteries and their associated management and control systems including considerations for end-user notification.

Standard for Rechargeable Batteries for Multi-Cell Mobile Computing Devices

KS C 8546-2008 便携式设备用锂二次电池的安全性测试

이 표준은 휴대기기용 리튬이차전지의 안전성 시험에 대하여 규정한다. 다만, 산업용, 차량구

Safety tests for lithium secondary cells and batteries for portable applications

KS C 8546-2008(2013) 安全测试的锂二次电池和电池组用于便携式应用

Safety tests for lithium secondary cells and batteries for portable applications

KS C IEC 61951-1:2008 便携式密封镍镉电池

이 표준은 충전 가능한 휴대용 소형 각형 밀폐 니켈ㆍ카드뮴 축전지, 원통형 및 단추형 단위

Secondary cells and batteries containing alkaline or other non-acid electrolytes－Portable sealed rechargeable single cells－Part 1：Nickel-cadmium

KS C IEC 61959:2008 密封的便携式二次蓄电池的机械试验

이 표준은 취급 및 일반 사용 중의 휴대용 밀폐 2차 단전지/전지의 기계적 성질을 검증하기

Secondary cells and batteries containing alkaline or other non-acid electrolytes－Mechanical tests for sealed portable secondary cells and batteries

KS C IEC 61960-1:2008 二次锂电池用于便携式应用

Secondary lithium cells for portable applications

KS C IEC 61960-2:2008 用于移动设备的锂二次电池

Secondary lithium batteries for portable applications

CNS 15174-2008 ＬＥＤ模块之交、直流电源电子式控制装置－性能要求

DC or AC supplied electronic control gear for LED module - Performance requirements

GOST R IEC 60623-2008 备用碱性和其它非酸性电池.通风镍镉合金可充单电池

Secondary cells and batteries containing alkaline or other non-acid electrolytes. Vented nickel-cadmium prismatic rechargeable single cells

IEEE 1625-2008 多电池移动式计算装置用可再充电蓄电池

Rechargeable batteries for multi-cell mobile computing devices

GOST R IEC 61959-2007 备用碱性和其它非酸性电池.密封便携式蓄电池的机械测试

Secondary cells and batteries containing alkaline or other non-acid electrolytes. Mechanical tests for sealed portable secondary cells and batteries

GOST R IEC 61960-2007 备用碱性和其它非酸性电池.便携式锂蓄电池

Secondary cells and batteries containing alkaline or other non-acid electrolytes. Secondary lithium cells and batteries for portable applications

ASTM D7148-07(2011) 电解槽测量系统中使用碳极测定碱性蓄电池隔板的离子电阻系数(ER)用标准试验方法

The ER of a battery separator is a standard measurement used by separator and battery manufacturers for quality control purposes and separator selection. Separator ER and the separator''s interaction with the electrolyte, that is resistance to wetting or flow, will contribute to the internal resistance of the battery and this can potentially limit the electrical output of a battery. The ER determination is a tool for battery manufacturers to use in design, material selection, and performance specifications. The change in the bath electrical resistance imparted by a separator is affected by the porosity, thickness, and tortuousity of the pore structure of the separator, the wettability of the separator to the electrolyte, and the temperature and concentration of the electrolyte. Incomplete wetting or saturation of the pore structure limits the lowest ER value obtainable from a separator structure. Separators are pretreated to assure that the specimen being tested has been adequately wetted out. A separator that is not fully wetted out (saturated) will give a higher ER. This test method is intended to give a rapid and repeatable measurement that approximates the change in ER that could happen when the separator is used in a battery.1.1 This test method covers the pretreatment, test conditions, apparatus, and procedure to determine the ionic resistivity, commonly referred to in the battery industry as electrical resistance (ER) of an alkaline battery separator immersed in an electrolyte of 40 % potassium hydroxide (KOH). 1.2 The values stated in SI units are to be regarded as the standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Determining the Ionic Resistivity (ER) of Alkaline Battery Separator Using a Carbon Electrode in an Electrolyte Bath Measuring System

GOST R IEC 62259-2007 备用碱性和其它非酸性电池.可部分重组的镍铬合金柱状单个蓄电池

Secondary cells and batteries containing alkaline or other non-acid electrolytes. Nickel-cadmium prismatic secondary single cells with partial recombination

ANSI C18.2M Part 2-2007 便携式可再充电电池.安全标准

This Standard specifies performance requirements for standardized portable lithium-ion, nickel cadmium, and nickel metal hydride rechargeable cells and batteries to ensure their safe operation under normal use and reasonably foreseeable misuse, and inclu

Portable Rechargeble Cells and Batteries - Safety Standard

GOST R IEC 61951-2-2007 备用碱性和其它非酸性电池.便携式密封可充电单电池.第2部分:镍金属氢化物

Secondary cells and batteries containing alkaline or other non-acid electrolytes. Portable sealed rechargeable single cells. Part 2. Nickel-metal hydride

DIN EN 61951-1:2006 含有碱性或其他非酸性电解液的蓄电池和蓄电池组. 便携密封可再充电单电池. 第1部分. 镍镉电池（IEC 61951-1: 2003 + A1: 2005）; 德文版本EN 61951-1: 2003 + A1: 2006

This Part of IEC 61951 specifies marking designation, dimension, tests and requirements for portable sealed nickel-cadmium small prismatic, cylindrical and button rechargeable singe cells, suitable for use in any orientation.

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells - Part 1: Nickel-cadmium (IEC 61951-1:2003 + A1:2005); German version EN 61951-1:2003 + A1:2006