29.240.10 标准查询与下载
共找到 284 条与 相关的标准，共 19 页
本标准规定了12 kV铁路电力远动箱式变电站（以下简称变电站）的正常和特殊使用条件、术语和定义、额定值、基本要求、设计和结构、试验方法、检验规则、查询、投标和订货时提供的资料、运输、储存、安装、运行及维护、安全、产品对环境的影响、质量承诺的内容。 本标准适用于高压侧交流额定电压12 kV、低压侧交流额定电压0.4 kV、频率50 Hz，配置变压器、高低压开关设备、远动终端设备（RTU）的12 kV铁路电力远动箱式变电站或其它同等要求的箱式变电站。
Railway's power telecontrol box-type substation for rated voltage 12kV
- ICS
- 29.240.10
- CCS
- C371
- 发布
- 2018-11-30
- 实施
- 2019-03-06
Cubicle type high voltage power receiving units
- ICS
- 29.240.10
- CCS
- K43
- 发布
- 2018-02-20
- 实施
随着智能变电站建设的推进，对变电站间隔层测控装置提出了新的应用需求，以加强变电站测控装置标准化为主要手段，以提高变电站运行安全性、智能性、运维便捷性和对调控主站的支撑作用为根本目标，统一外观接口、信息模型、通信服务，规范参数配置、应用功能、版本管理、质量控制，实现变电站测控装置标准化，为电网安全稳定运行提供可靠技术保障，特制定本技术规范。 现行国家标准、行业标准和IEC标准等未统一变电站测控装置技术要求等内容，不能适应智能变电站建设要求，为使变电站测控装置选型、设备采购等工作有所遵循，特编制本标准。 本标准规定了变电站测控装置的外观及接口、主要功能、人机界面、参数配置、信息模型及通信服务和性能指标方面的技术要求。 本标准适用于变电站测控装置、保护测控集成装置的测控部分，电厂以及冶金、化工领域测控装置可参照执行。
The technical specifications for measurement and control device in substation
- ICS
- 29.240.10
- CCS
- C382
- 发布
- 2018-02-06
- 实施
- 2018-11-13
Surge arresters - Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV
- ICS
- 29.240.10
- CCS
- 发布
- 2018-02-01
- 实施
Surge arresters - Part 5: Selection and application recommendations
- ICS
- 29.240.10
- CCS
- 发布
- 2018-01-19
- 实施
This part of IEC 61643 is applicable to Surge Protective Devices (SPDs)@ intended for surge protection against indirect and direct effects of lightning or other transient overvoltages. These devices are designed to be connected to the DC side of photovoltaic installations rated up to 1 500 V DC. These devices contain at least one non-linear component and are intended to limit surge voltages and divert surge currents. Performance characteristics@ safety requirements@ standard methods for testing and ratings are established. SPDs complying with this standard are exclusively dedicated to be installed on the DC side of photovoltaic generators and the DC side of inverters. SPDs for PV systems with energy storage (e.g. batteries@ capacitor banks) are not covered. SPDs with separate input and output terminals that contain specific series impedance between these terminal(s) (so called two-port SPDs according to IEC 61643-11:2011) are not covered. SPDs compliant with this standard are designed to be permanently connected where connection and disconnection of fixed SPDs can only be done using a tool. This standard does not apply to portable SPDs NOTE 1 In general SPDs for PV applications do not contain a specific series impedance between the input/output terminals due to power efficiency considerations. NOTE 2 Wherever reference is made to the electric power system or the power system within this document@ this refers to the DC side of the photovoltaic installation.
Low-voltage surge protective devices - Part 31: Requirements and test methods for SPDs for photovoltaic installations
- ICS
- 29.240.10
- CCS
- 发布
- 2018-01-10
- 实施
- 2018-01-12
Condition-based maintenance test procedures for distribution network equipment
- ICS
- 29.240.10
- CCS
- F23
- 发布
- 2017-11-15
- 实施
- 2018-03-01
Surge arresters - Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV
- ICS
- 29.240.10
- CCS
- 发布
- 2017-11-14
- 实施
This part of IEC 60099 covers metal-oxide surge arresters with external series gap (externally gapped line arresters (EGLA)) that are applied on overhead transmission and distribution lines@ only to protect insulator assemblies from lightning-caused flashovers. This document defines surge arresters to protect the insulator assembly from lightning-caused over-voltages only. Therefore@ and since metal-oxide resistors are not permanently connected to the line@ the following items are not considered for this document: ? switching impulse spark-over voltage; ? residual voltage at steep current and switching current impulse; ? thermal stability; ? long-duration current impulse withstand duty; ? power-frequency voltage versus time characteristics of an arrester; ? disconnector test; ? aging duties by power-frequency voltage. Considering the particular design concept and the special application on overhead transmission and distribution lines@ some unique requirements and tests are introduced@ such as the verification test for coordination between insulator withstand and EGLA protective level@ the follow current interrupting test@ mechanical load tests@ etc. Designs with the EGLA's external series gap installed in parallel to an insulator are not covered by this document.
Surge arresters - Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV
- ICS
- 29.240.10
- CCS
- 发布
- 2017-11-01
- 实施
- 2017-11-16
本规范适用于110 (66) kV及以上电压等级的智能变电站新建及改（扩）建工程。
Technical specification for construction of smart substation
- ICS
- 29.240.10
- CCS
- P62
- 发布
- 2016-08-16
- 实施
- 2016-12-01
本标准规定了正常和特殊使用条件，额定值，设计和结构，型式试验，出厂试验，智能光伏变电站的选用导则，与询问单、标书和订单一起提供的资料，运输、安装、运行、维护和寿命终了规程，安全。
Intelligent photovoltaic prefabricated substation
- ICS
- 29.240.10
- CCS
- C3821
- 发布
- 2016-05-20
- 实施
- 2016-07-13
本标准规定了 1000kV 交流输电线路用带串联间隙复合外套金属氧化物避雷器的标志、 标准额定值、运行条件、技术要求、试验方法、检查规则、包装、运输及保管、安装等内容。 本标准适用于 1000kV 交流输电线路用带串联间隙复合外套金属氧化物避雷器的生产、 安装及运行。 本标准不涉及带绝缘支撑件外串联间隙线路避雷器的支撑件部分，相关要求可参照 DL/T 815 执行。
Specification of polymer-housed metal oxide surge arresters with series gap for 1000KV AC power transmission lines
- ICS
- 29.240.10
- CCS
- D442
- 发布
- 2015-12-21
- 实施
- 2017-03-16
This technical specification applies to the specification and evaluation of outdoor audible noise from high voltage direct current (HVDC) substations. It is intended to be primarily for the use of the utilities and consultants who are responsible for issuing technical specifications for new HVDC projects with and evaluating designs proposed by prospective contractors. It is primarily intended for HVDC projects with line-commutated converters. Part of this technical specification can also be used for the same purpose for HVDC projects using voltage sourced converters, and for flexible a.c. transmission systems (FACTS) devices such as static Var compensators (SVCs) and static synchronous compensators (STATCOMs).
High voltage direct current (HVDC) substation audible noise
- ICS
- 29.240.10
- CCS
- 发布
- 2015-09-03
- 实施
Low voltage surge protective devices — Part 21: Surge protective devices connected to telecommunications and signalling networks — Performance requirements and testing methods
- ICS
- 29.240.10
- CCS
- K31
- 发布
- 2015-07-28
- 实施
Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems (IEC 60099-4:2014); German version EN 60099-4:2014
- ICS
- 29.240.10
- CCS
- K45
- 发布
- 2015-07
- 实施
Low-voltage surge protective devices - Part 22: Surge protective devices connected to telecommunications and signalling networks - Selection and application principles
- ICS
- 29.240.10
- CCS
- 发布
- 2015-06-25
- 实施
本部分定义了电力市场通信公共信息模型(CIM)。CIM是一个抽象模型，它描述了电力企业的所有主要对象，特别是那些与电力运行以及电力市场管理有关的对象。CIM通过提供一种用对象类、属性以及它们之间的关系来表示电力系统资源的标准方法，便于实现不同供应商独立开发的市场管理系统(MMS)应用的集成，多个独立开发的完整MMS之间的集成，以及MMS和其他涉及市场管理的不同方面的系统，例如容量分配、日前管理、平衡结算等之间的集成。CIM通过定义一种基于CIM的公共语言(即语法和语义)来实现集成，这种公共语言使得这些应用或系统能够访问公共数据并且交换信息而不依赖于信息的内部表示。CIM中描述的对象类本质上是抽象的，可以用于各种应用。CIM的使用远远超出了在MMS中应用的范围。由于完整CIM的规模较大，所以将包含在CIM中的对象类分成了几个逻辑包(logical packages)，每个逻辑包对整个电力系统模型的某个部分进行建模。这些包的集合发展成为独立的标准。本部分规定了包的基本集合，提供了电力企业内部各应用共享的市场管理功能方面的逻辑视图，其他部分规定了特定应用所需模型的具体部分。本部分的4.2描述了目前标准文档中包的划分。
Framework for energy market communications.Part 301: Common information model extensions for markets
- ICS
- 29.240.10
- CCS
- F21
- 发布
- 2015-04-02
- 实施
- 2015-09-01
本标准规定了变电站用接地线绕线装置的分类、要求、试验、检验规则，以及标志、包装、运输和贮存。本标准适用于变电站使用的接地短路线(包括个人保安线)绕线装置。
Device of winding earthing wire for substation
- ICS
- 29.240.10
- CCS
- F21
- 发布
- 2015-04-02
- 实施
- 2015-09-01
本标准规定了风力发电机组--双馈异步发电机用瞬态过电压抑制器(TOSE)的术语和定义、技术要求、试验方法等。本标准规定的TOSE适用于交流额定电压至690V、符合IEC 61400-24：2010规定的、运行于陆上的并网型双馈异步风力发电机组。
Wind turbine Transient overvoltage suppression equipment for double-fed asynchronous generator
- ICS
- 29.240.10
- CCS
- K30
- 发布
- 2014-10-15
- 实施
- 2015-03-01
Surge arresters - Part 5: Selection and application recommendations (IEC 60099-5:2013); German version EN 60099-5:2013
- ICS
- 29.240.10
- CCS
- K49
- 发布
- 2014-09-01
- 实施
