29.240.99 标准查询与下载

23/30435543 DC BS EN IEC 63380-1 本地充电站管理系统和本地能源管理系统网络连接和信息交换 第1部分：一般要求、用例和抽象消息

BS EN IEC 63380-1. Local Charging station management systems and Local Energy Management Systems network connectivity and information exchange - Part 1. General Requirements, Use Cases and abstract Messages

T/QGCML 1735-2023 电弧超声波故障定位在线监测装置

本文件规定了电弧超声波故障定位在线监测装置的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于电弧超声波故障定位在线监测装置的生产、检验与验收工作。

Arc ultrasonic fault location online monitoring device

DL/T 2634-2023 35kV及以下陶瓷电容传感器型局部放电监测装置技术规范

本文件规定了 35 kV 及以下陶瓷电容传感器型局部放电监测装置（以下简称“装置”）的组成、使用条件、功能要求、技术要求、试验方法、检验规则、标志、标签和随行文件及包装、运输和贮存等要求。 本文件适用于测量频率范围在10 kHz～30 MHz，采用陶瓷电容传感器耦合电气设备局部放电信号的在线监测装置，适用于发电机、开关柜、环网柜、变压器等电气设备局部放电在线监测。

Technical specifications for ceramic capacitive sensor type partial discharge monitoring devices of 35kV and below

DB34/T 4575-2023 乡村配电设施建设改造技术规程

Technical regulations for construction and renovation of rural power distribution facilities

T/QGCML 1397-2023 断电保护式防火防爆的高压电气配电柜

本文件规定了断电保护式防火防爆的高压电气配电柜的术语和定义、构成及原理、要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于断电保护式防火防爆的高压电气配电柜的生产及检验。

Fire-proof and explosion-proof high-voltage electrical distribution cabinet with power failure protection

T/QGCML 1208-2023 输配电变电铁附件制造技术条件

本文件规定了输配电变电铁附件制造技术条件的术语和定义、总则、材料要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存、资料移交要求。 本文件适用于输配电变电铁附件的生产及检验。

Manufacturing technical conditions for power transmission and distribution transformer accessories

T/CEPPEA 5021-2023 城市居住区电动汽车充电设施设计规范

规定了城市居住区电动汽车充电设施设计的总体要求、建设规模及充电设施选址、供配电系统、充电设施、通信及监控、电能质量、计量、土建、消防、节能与环保等设计技术要求。

Design specification for electric vehicle charging infrastructure system in urban residential area

T/CEPPEA 5022-2023 高速公路电动汽车充电设施设计规范

规定了高速公路电动汽车充电设施设计的总体要求、建设规模及选址、供配电系统、充电设备及布置、通信及监控、电能质量、计量、土建、消防、节能与环保等技术要求。

Design specification for express way electric vehicle charging infrastructure system

T/CEPPEA 5019-2023 电动汽车有序充电设备技术条件

规定了电动汽车有序充电设备的总体要求、功能要求、技术要求、试验要求、标志、包装、运输、贮存等方面的要求。

Technical specifications for coordinated charging equipment of electric vehicles

DL/T 2603-2023 电容型设备相对介质损耗因数及电容量比值带电测试方法

本文件规定了电容型设备相对介质损耗因数及电容量比值现场带电测试的测试接线、要求、方法、测试结果的判断及处理等要求。 本文件适用于110kV及以上电压等级电容型设备的相对介质损耗因数及电容量比值带电测试。

Live test method for relative dielectric loss factor and capacitance ratio of capacitive equipment

T/CES 200-2023 光储热微能网综合评价导则

本标准规定了光储热微能网规划建设成效的综合评价原则、计算方法和流程。 （1）评价指标体系 价指标体系由供热质量、经济运行、绿色低碳三个方面组成。从保障建筑分布式电采暖的优质高效供给、优化系统经济运行、提高热交换绿色低碳水平等方面评价光储热微能网建设运行整体水平。 （2）评价指标与计算方法 价指标体系中供热质量、经济运行、绿色低碳三个方面分别下辖多个二级指标，本标准详细解释了这些二级评价指标及其计算方法。 （3）评价流程 综合评价的主要流程如下： a)根据待评价区域实际发展情况，选取适当的二级评价指标。 b)选取适用的指标赋权方法对二级指标进行赋权，加权计算得到一级指标的评分。 c)结合供热质量、经济运行和绿色低碳三方面的评价得分，加权计算光储热微能网的综合得分。 d)给出建筑分布式供能的光储热微能网综合评价结论，提出光储热微能网规划建设的优化建议。

Solar storage heating micro energy grid comprehensive evaluation rules

IEC 62927:2017/AMD1:2023 修改件1-静态同步补偿器（STATCOM）用电压源换流器（VSC）阀-电气试验

Amendment 1 - Voltage sourced converter (VSC) valves for static synchronous compensator (STATCOM) - Electrical testing

IEC 62927:2017+AMD1:2023 CSV 静态同步补偿器（STATCOM）的电压源换流器（VSC）阀-电气测试

Voltage sourced converter (VSC) valves for static synchronous compensator (STATCOM) - Electrical testing

GSO IEC 63245-1:2023 基于多重磁共振的空间无线电力传输 第1部分：要求

IEC 63245-1:2021 specifies requirements for spatial wireless power transfer based on multiple magnetic resonances (SWPT-MMR), which is a non-radiative wireless power transfer (WPT). This document contains two categories of requirements: general requirements and functional requirements. The general requirements cover charging procedures and charging zones. The functional requirements cover each component of a SWPT-MMR system, such as transmitter coils.

Spatial wireless power transfer based on multiple magnetic resonances - Part 1: Requirements

T/ZJSEE 0002-2023 配电室内轮式巡检机器人技术规范

本文件规定了配电室内轮式巡检机器人（以下简称“机器人”）的使用条件、技术要求、试验、检验规则及标志、包装、运输、贮存的要求。

Technical specifications for wheeled inspection robots in power distribution rooms

KS C IEC TR 62511:2022 互联电力系统设计指南

Gidelines for the design of interconnected power systems

KS C IEC TR 62511-2022 互联电力系统设计指南

Gidelines for the design of interconnected power systems

IEC 63245-2:2022 基于多重磁共振的空间无线电力传输 第2部分：参考模型

Spatial wireless power transfer based on multiple magnetic resonances - Part 2: Reference model

BS EN IEC 62980:2022 用于射频无线电力传输的寄生通信协议

This document defines procedures for transferring power to non-powered IoT devices using the existing ISM band communication infrastructure and RF WPT and a protocol for a two-way, long-distance wireless network in which IoT devices and APs communicate using backscatter modulation of ISM-band signals. Three components are required for two-way, long-distance wireless communication using backscatter modulation of ISM-band signals: • an STA that transmits wireless power and data packets to SSNs by forming ISM-band signal channels between HIE-APs, • a battery-free SSN that changes the sensitivity of the channel signals received from the STA using backscatter modulation, and • an HIE-AP that practically decodes the channel signals whose sensitivity was changed by the SSN. In this document, the procedures for CW-type RF WPT using communication among these three components are specified based on application of the CSI or RSSI detection method of ISM- band communication. This document proposes a convergence communication protocol than can deploy sensors, which can operate at low power (dozens of microwatts or less) without batteries, collect energy, and perform communication, to transmit power to SSNs using RF WPT based on parasitic communication. This method can be applied to application service areas such as domestic IoT, the micro-sensor industry, and industries related to environmental monitoring in the future.

Parasitic communication protocol for radio-frequency wireless power transmission

T/GEIA 17-2022 安全用电智能设备

前??言 1 范围 2 规范性引用文件 3 术语和定义 4 信息 5 使用条件 6 结构要求 7 性能要求 8 设计验证 9 例行检验

Intelligent Equipment for Safe Use of Electricity