共找到 110 条与 电阻器 相关的标准,共 8 页
Scope. This specification covers the general requirements for hermetically sealed (see 3.10) and nonhermetically sealed (see 3.10.1) networks. These networks consist entirely of fixed, film resistors, or fixed, film resistors and ceramic capacitors. They are primary intended for use in electronic circuits. This specification has two product levels, a high reliability, 100 percent burn-in screened “M” part number level and nonburn-in screened (without the mandatory conformance inspection) part number level “C” (see 1.2.1).
RESISTOR NETWORKS, FIXED, FILM, AND CAPACITOR-RESISTOR NETWORKS, CERAMIC CAPACITOR AND FIXED, FILM, RESISTORS, GENERAL SPECIFICATION FOR
An asterisk adjacent to the product listing indicates that qualified parts listed on the QPL are available through distributors authorized bythe manufacturer in accordance with Military Standard MIL-STD-790. Names and addresses of the distributors are listed in the back of this QPL.
RESISTORS, FIXED, FILM, NONESTABLISHED RELIABILITY, ESTABLISHED RELIABILITY, AND SPACE LEVEL, GENERAL SPECIFICATION FOR
This list has been prepared for use by or for the Government in the acquisition of products covered by Specification MIL-PRF-49465. Listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense.
RESISTORS, FIXED, METAL ELEMENT (POWER TYPE), VERY LOW RESISTANCE VALUES, GENERAL SPECIFICATION FOR
This list has been prepared for use by or for the Government in the acquisition of products covered by subject specification and such listing of a product is not intended to and does not connote indorsement of the product by the Department of Defense. All products listed herein have been qualified under the requirements for the product as specified in the latest effective issue of the applicable specification. This list is subject to change without notice; revision or amendment of this list will be issued as necessary. The listing of a product does not release the supplier from compliance with the specification requirements.
RESISTOR NETWORKS, FIXED, FILM, AND CAPACITOR-RESISTOR NETWORKS, CERAMIC CAPACITOR AND FIXED FILM RESISTORS, GENERAL SPECIFICATION FOR
This specification covers the general requirements for nonestablished reliability(non-ER) and established reliability(ER), insulated, film, fixed resistors.
RESISTORS, FIXED, FILM (INSULATED), NONESTABLISHED RELIABILITY, AND ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
THE ACTIVITY RESPONSIBLE FOR THIS QPL IS THE DEFENSE SUPPLY CENTER COLUMBUS (DSCC-VQ), COLUMBUS, OH 43218-3990.
RESISTOR, VARIABLE, WIRE-WOUND (LOW OPERATING TEMPERATURE), GENERAL SPECIFICATION FOR
This list has been prepared for use by or for the Government in the acquisition of products covered by Specification MIL-PRF-22. Listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense
RESISTORS, VARIABLE (WIRE WOUND, POWER TYPE), GENERAL SPECIFICATION FOR
This list has been prepared for use by or for the Government in the acquisition of products covered by Specification MIL-PRF-123. Listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense.
CAPACITORS, FIXED, CERAMIC DIELECTRIC (TEMPERATURE STABLE AND GENERAL PURPOSE), HIGH RELIABILITY, GENERAL SPECIFICATION FOR
This list has been prepared for use by or for the Government in the acquisition of products covered by subject specification and such listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense. All products listed herein have been qualified under the requirements for the product as specified in the latest effective issue of the applicable specification. This list is subject to change without notice; revision or amendment of this list will be issued as necessary. The listing of a product does not release the supplier from compliance with the specification requirements.
RESISTOR, VARIABLE, WIRE WOUND, NONPRECISION, AIRCRAFT POWER
This list has been prepared for use by or for the Government in the acquisition of products covered by Specification MIL-PRF-26. Listing of a productis not intended to and does not connote endorsement of the product by the Department of Defense.
RESISTORS, FIXED, WIRE WOUND (POWER TYPE), GENERAL SPECIFICATION FOR
This list has been prepared for use by or for the Government in the acquisition of products covered by Specification MIL-PRF-94. Listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense. All products listed herein have been qualified under the requirements for the product as specified in the latest effective issue of the applicable specification. This list is subject to change without notice; revision or amendment of this list will be issued as necessary. The listing of a product does not release the supplier from compliance with the specification requirements.
RESISTORS, VARIABLE, COMPOSITION, GENERAL SPECIFICATION FOR
his list has been prepared for use by or for the Government in the acquisition of products covered by Specification MIL-PRF-32192. Listing of a product is not intended to and does not connote
RESISTORS, CHIP, THERMAL (THERMISTOR), GENERAL SPECIFICATION FOR
This specification covers the general requirements for fixed, chip, thermal resistors. These thermistors exhibit a positive temperature coefficient (PTC) or a negative temperature coefficient (NTC) and are primarily intended for incorporation into surface mount applications. These devices are to be used for temperature control, temperature compensation, sensing, and frequency compensation over the temperature range specified.
RESISTORS, CHIP, THERMAL (THERMISTOR), GENERAL SPECIFICATION FOR
THE ACTIVITY RESPONSIBLE FOR THIS QPL IS THE DEFENSE SUPPLY CENTER COLUMBUS (DSCC-VQ), COLUMBUS, OH 43218-3990.
RESISTOR, VARIABLE, WIRE WOUND, NONPRECISION, GENERAL SPECIFICATION FOR
This list has been prepared for use by or for the Government in the acquisition of products covered by Specification MIL-PRF-49462. Listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense.
RESISTORS, FIXED, FILM, HIGH VOLTAGE, GENERAL SPECIFICATION FOR
The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.
RESISTOR, VARIABLE, WIRE WOUND, PRECISION, GENERAL SPECIFICATION FOR
이 규격에 제시된 치수는 IEC 60390(1972) 및 60620(1984)로부터 발췌하
Capacitors and resistors for electronic equipment-Preferred dimensions of spindle ends, bushes and for the mounting of single-hole, bush-mounted, spindle-operated electronic components
Capacitors and resistors for electronic equipment-Preferred dimensions of spindle ends, bushes and for the mounting of single-hole, bush-mounted, spindle-operated electronic components
This commercial item description covers brown kraft paper used for general wrapping applications.
RESISTORS, FIXED, WIRE WOUND (POWER TYPE), NONESTABLISHED RELIABILITY, ESTABLISHED RELIABILITY, AND SPACE LEVEL, GENERAL SPECIFICATION FOR
This commercial item description covers brown kraft paper used for general wrapping applications.
RESISTORS, FIXED, FILM (INSULATED), NONESTABLISHED RELIABILITY, AND ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号