31.140;31.160 标准查询与下载

BS EN 61337-1:2005 使用波导型介电谐振器的滤波器.总规范

Filters using waveguide type dielectric resonators - Generic specification

DIN EN 61337-2:2005 使用波导型介质谐振器的滤波器.第2部分:使用指南

The scope of this guide is limited to the filters using waveguide type dielectric resonators that are used for microwave applications such as portable phones, cellular base stations and radio links.#,,#

Filters using waveguide type dielectric resonators - Part 2: Guidance for use (IEC 61337-2:2004); German version EN 61337-2:2004

NF C93-619-2*NF EN 61337-2:2005 采用波导型介电谐振器的滤波器.第2部分:使用指南

Filters using waveguide type dielectric resonators - Part 2 : guide for use.

BS EN 61337-2:2004 采用波导型介电谐振器的滤波器.使用指南

The scope of this part of IEC 61337 is limited to filters using waveguide type dielectric resonators that are used for microwave applications such as portable phones, cellular base stations and radio links. It is not the aim of this standard either to explain the theory or to attempt to cover all the eventualities that may arise in practical circumstances. This standard draws attention to some of the more fundamental questions which should be considered by the user before he places an order for dielectric filters for a new application. Such a procedure will be the user's insurance against unsatisfactory performance. Standard specifications, such as those given in IEC 61337, and national specifications or detail specifications issued by manufacturers, will define the available combinations of mid-band frequency, pass band, insertion attenuation, pass-band ripple, return attenuation, spurious response, operating power, and so on. These specifications are compiled to include a wide range of dielectric filters with standardized performances. It cannot be over-emphasized that the user should, wherever possible, select his dielectric filters from these specifications, when available, even if it involves making small modifications to his circuit to enable standard filters to be used.

Filters using waveguide type dielectric resonators - Guide for use

IEC 61337-2:2004 采用波导型介电谐振器的滤波器.第2部分:使用指南

Draws attention to some of the more fundamental questions which should be considered by the user before he places an order for dielectric filters for a new application. Is limited to filters using waveguide type dielectric resonators that are used for mi

Filters using waveguide type dielectric resonators - Part 2: Guidance for use

KS C IEC 60368-4-1:2002 经质量评定的压电滤波器.第4-1部分:空白详细规范.能力鉴定

서 문 이 규격은 2000년에 제1판으로 발행된 IEC 60368-4-1 Piez

Piezoelectric filters of assessed quality－Part 4－1：Blank detail specification－Capability approval

BS EN 60368-3:2002 压电滤波器.标准外形和引线连接

This part of IEC 60368 specifies the outline dimensions and lead connections for piezoelectric filters with leaded enclosures.

Piezoelectric filters - Standard outlines and lead connections

DIN EN 60368-4-1:2001 经过质量评定的压电滤波器.第4-1部分:空白详细规范.能力鉴定

The document is a supplementary document to the sectional specification and contains requirements for the minimum contents of detail specifications.

Piezoelectric filters of assessed quality - Part 4-1: Blank detail specification; Capability approval (IEC 60368-4-1:2000); German version EN 60368-4-1:2000 + Corrigendum:2001

DIN EN 60368-4:2001 经过质量评定的压电滤波器.第4部分:分规范.能力鉴定

The document applies to piezoelectric filters as custom-built products or as standard catalogue items whose quality is assessed on the basis of capability approval.

Piezoelectric filters of assessed quality - Part 4: Sectional specification; Capability approval (IEC 60368-4:2000); German version EN 60368-4:2000 + Corrigendum:2001

BS EN 60368-4-1:2001 压电滤波器 空白详细规范 能力认可

To be read in conjunction with BS EN 60368-1:2000, BS EN 60368-4:2001

Piezoelectric filters. Blank detail specification.. Capability approval

BS EN 60368-4:2001 压电滤波器 剖面规范 能力认可

This part of IEC 60368 applies to piezoelectric filters as custom-built products or as standard catalogue items whose quality is assessed on the basis of capability approval. It prescribes the preferred ratings and characteristics, with appropriate tests and measuring methods contained in the generic specification, IEC 60368-1, and gives the general perform-ance requirements to be used in detail specifications for piezoelectric filters. The concept of preferred values is directly applicable to standard catalogue items, but does not necessarily apply to custom-built products.

Piezoelectric filters. Sectional specification. Capability approval

IEC 60368-4-1:2000 经质量评定的压电滤波器 第4-1部分:空白详细规范:能力批准

Piezoelectric filters of assessed quality Part 4-1: Blank detail specification Capability approval

Piezoelectric filters of assessed quality - Part 4-1: Blank detail specification; Capability approval

BS EN 60368-1:2000 压电滤波器 通用规格

This part of IEC 60368 specifies the methods of test and general requirements for piezoelectric filters of assessed quality using either capability approval or qualification approval procedures.

Piezoelectric filters. Generic specification

IEC 60368-4:2000 经质量评定的压电滤波器 第4部分:分规范 能力批准

This part of IEC 60368 applies to piezoelectric filters as custom-built products or as standard catalogue items whose quality is assessed on the basis of capability approval. It prescribes the preferred ratings and characteristics, with appropriate tests and measuring methods contained in the generic specification, IEC 60368-1, and gives the general perform-ance requirements to be used in detail specifications for piezoelectric filters. The concept of preferred values is directly applicable to standard catalogue items, but does not necessarily apply to custom-built products.

Piezoelectric filters of assessed quality - Part 4: Sectional specification; Capability approval

IEC 60368-1:2000 经质量评定的压电滤波器 第1部分:总规范

GB／T 22317的本部分规定了采用能力批准程序或鉴定批准程序评定质量的压电滤波器的试验方 法和通用性要求。

Piezoelectric filters of assessed quality - Part 1: Generic specification

BS EN 60368-2-2:1999 压电滤波器 压电滤波器的使用指南 压电陶瓷滤波器

This section of IEC 368-2 describes passive band-pass filters operating over the frequency range of a few kHz to more than 10 MHz which are commercially available as separate and independent units. It is not the aim of this standard to explain theory, nor to attempt to cover all the eventualities which may arise in practical circumstances. This standard draws attention to some of the fundamental questions which should be considered by the user before he places an order for a filter for a new application. Such a procedure will be the user's insurance against unsatisfactory performance.

Piezoelectric filters. Guide to the use of piezoelectric filters. Piezoelectric ceramic filters

DIN EN 60368-2-2:1999 压电滤波器.第2部分:压电滤波器的使用指南.第2节:压电陶瓷滤波器

The document describes passive band-pass filters operating over the frequency range of a few kHz to more than 10 MHz which are commerically available as separate and independent units.

Piezoelectric filters - Part 2: Guide to the use of piezoelectric filters - Section 2: Piezoelectric ceramic filters (IEC 60368-2-2:1996); German version EN 60368-2-2:1999

NF C93-619-1-1:1999 使用波导型电介质谐振器的过滤器.第1部分:一般信息、标准值和试验条件.第1部分:一般信息和标准值

Filters using waveguide type dielectric resonators. Part 1 : general information, standard values and test conditions. Section 1 : general information and standard values.

IEC 61337-1-2:1999 采用波导型介电谐振器的滤波器 第1-2部分:试验条件

Filters using waveguide type dielectric resonators - Part 1-2: Test conditions

BS EN 61337-1-1:1998 使用波导型介电谐振器的滤波器.一般信息、标准值和试验条件.一般信息和标准值

To be read in conjunction with BS EN 60068-1:1995

Filters using waveguide type dielectric resonators - General information, standard values and test conditions - General information and standard values