31.160 滤波器 标准查询与下载

KS C IEC 60939-2:2003 抑制电磁干扰用无源滤波装置.第2部分:分规范:安全试验恰当的无源滤波装置.试验方法和通用要求

이 규격은 IEC 60939-1의 일반 사항의 적용 범위에 있는 간섭 방지용 필터 소자

Complete filter units for radio interference suppression－Part 2：Sectional specification

NF C93-631-1:2003 经质量评定的声表面波(SAW)过滤器.第1部分:总规范

Surface acoustic wave (SAW) filters of assessed quality - Part 1 : generic specification.

DS/EN 60862-1:2003 质量评估的表面声波（SAW）滤波器 第1部分：通用规范

This part of 60862 specifies the methods of test and general requirements for SAW filters of assessed quality using either capability approval or qualification approval procedures.

Surface acoustic wave (SAW) filters of assessed quality - Part 1: Generic specification

IEC 60862-3:2003 经质量评定的声表面波(SAW)滤波器.第3部分:标准外形

Specifies the outline drawings for surface acoustic wave (SAW) filters with leaded enclosures.

Surface acoustic wave (SAW) filters of assessed quality - Part 3: Standard outlines

BS EN 60862-1:2003 经质量评定的声表面波(SAW)滤波器.总规范

This part of IEC 60862 specifies the methods of test and general requirements for SAW filters of assessed quality using either capability approval or qualification approval procedures.

Surface acoustic wave (SAW) filters of assessed quality. Generic specification

ANSI/IEEE 1531:2003 谐波过滤器的使用和规范指南

Addresses the selection of the 1. Components, 2. Protection and 3. Control of harmonic filters.

Guide for Application and Specification of Harmonic Filters

KS C IEC 60939-1:2003 抑制电磁干扰用无源滤波装置.第1部分:总规范

이 규격은 주파수가 100 Hz 이하이고 도체 사이의 전압이 직류, 교류(실효값)

Complete filter units for radio interference suppression－Part 1：Generic specification

IEEE 1531-2003 谐波过滤器的应用和规范

Addresses the selection of the 1. Components, 2. Protection and 3. Control of harmonic filters.

Guide for Application and Specification of Harmonic Filters

IEC 60862-1:2003 经质量评定的声表面波(SAW)滤波器 第1部分:总规范

Relates to surface acoustic wave (SAW) filters for use in telecommunications, measuring equipment, radar systems and consumer products. Gives general information and general methods concerning measurements and tests common to many types of SAW filters.

Surface acoustic wave (SAW) filters of assessed quality - Part 1: Generic specification

NF C93-631-2:2003 经质量评定的表面声波(SAW)滤波器.第2部分:使用指南

Surface acoustic wave (SAW) filters - of assessed quality - Part 2 : guidance on use.

BS EN 60862-2:2002 经质量评定的声表面波(SAW)滤波器.使用指南

SAW filters are now widely used in a variety of applications such as TV, satellite communications, optical fibre communications, mobile communications and so on. While these SAW filters have various specifications, many of them can be classified within a few fundamental categories. This part of IEC 60862 includes various kinds of filter configuration, of which the operating frequency range is from approximately 10 MHz to 3 GHz and the relative bandwidth is about 0,02 % to 100 % of the centre frequency. It is not the aim of this standard to explain theory, nor to attempt to cover all the eventualities which may arise in practical circumstances. This standard draws attention to some of the more fundamental questions, which should be considered by the user before he places an order for a SAW filter for a new application. Such a procedure will be the user's insurance against unsatisfactory performance. Standard specifications, given in IEC 60862, and national specifications or detail specifications issued by manufacturers, define the available combinations of nominal frequency, pass bandwidth, ripple, shape factor, terminating impedance, etc. These specifications are compiled to include a wide range of SAW filters with standardized performances. It cannot be over-emphasized that the user should, wherever possible, select his SAW filters from these specifications, when available, even if it may lead to making small modifications to his circuit to enable standard filters to be used. This applies particularly to the selection of the nominal frequency.

Surface acoustic wave (SAW) filters of assessed quality - Guidance on use

JIS C 6703:2002 晶体滤波器总规范

この規格は，水晶フィルタの品目別通則であって，水晶フィルタに対する試験方法及び一般的要求事項を規定する。

Generic specification of crystal filters

DLA MS24489 REV D (1)-2002 机场着陆照明玻璃标记滤波器

This amendment forms a part of MS24489D dated 15 February 1960 and is approved for use by all Departments and Agencies of the Department of Defense.

FILTER, MARKER LIGHT, AIRPORT APPROACH, GLASS

DLA MS24502 REV E (1)-2002 机场进场照明玻璃标记滤波器

This amendment forms a part of MS24502E dated 15 February 1960 and is approved for use by all Departments and Agencies of the Department of Defense.

FILTER, MARKER LIGHT, AIRPORT RUNWAY, GLASS

IEC 60862-2:2002 质量评定的声表面波(SAW)滤波器.第2部分:使用指南

General and fundamental characteristics are explained. Surface acoustic wave (SAW) filters are now widely used in a variety of applications such as TV, satellite communica-tions, optical fibre communications etc. This standard describes various kinds of

Surface acoustic wave (SAW) filters of assessed quality - Part 2: Guidance on use

SJ 52438/10-2001 混合集成电路HMSF-600型电源滤波器详细规范

Hybrid integrated circuits Detail specification for type HMSF-600 power filters

LST EN 166101-2001 空白详细规范 表面声波（SAW）滤波器 能力审批

Blank detail specification. Surface Acoustic Wave (SAW) filters. Capability approval

LST EN 166100-2001 分项规范 表面声波（SAW）滤波器

Sectional specification. Surface acoustic wave (SAW) filters

DLA A-A-55169 B-2001 射频干扰滤波器

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

FILTER, RADIO FREQUENCY INTERFERENCE

DLA A-A-55167 B-2001 射频干扰滤波器

This CID covers the general requirements for radio frequency interference (RFI) suppression power line filters. These filters consist of capacitors and inductors used in combination with each other and are provided with resistors as a safety feature. Filters covered by this CID are intended for commercial/industrial applications and should not be used in military systems needing stringent environmental and electrical requirements.

FILTER, RADIO FREQUENCY INTERFERENCE