31.160 滤波器 标准查询与下载

GSO IEC 60939-2:2014 用于抑制电磁干扰的无源滤波器模块 第2部分：子规范 无源滤波器模块安全测试的适用性 测试方法和一般要求

This Sectional specification applies to passive filter units for electromagnetic interference suppression which fall within the scope of the Generic Specification IEC 60939-1. The scope of this Sectional specification is restricted to passive filter units for which safety tests are appropriate. This implies that filters specified according to this Sectional specification will either be connected to mains supplies, when compliance with the mandatory tests of Table 3 is necessary, or used in other circuit positions where the equipment specification prescribes that some or all of these safety tests are required. This Sectional specification applies to passive filter units which will be connected to an a.c. mains or other supply with a nominal voltage not exceeding 1 000 V a.c., with a nominal frequency not exceeding 400 Hz, or 1 000 V d.c.

Passive filter units for electromagnetic interference suppression - Part 2: Sectional specification - Passive filter units for which safety tests are appropriate - Test methods and general requirements

KS C 6121-2013 表面声波（SAW）滤波器

Surface acoustic wave(SAW) filters

IEC 60368-1:2000+AMD1:2004 CSV 经质量评定的压电滤波器 第1部分 通用 规格

Piezoelectric filters of assessed quality - Part 1: Generic specification

IEC 60368-1:2000/AMD1:2004 经质量评定的压电滤波器 第1部分 通用 规格

Piezoelectric filters of assessed quality - Part 1: Generic specification

DIN EN 60862-2:2013 符合评估质量的表面声波 (SAW) 过滤器. 第2部分:使用指南 (IEC 60862-2-2012); 德文版本EN 60862-2-2012

Surface acoustic wave (SAW) filters of assessed quality - Part 2: Guidelines for the use (IEC 60862-2:2012); German version EN 60862-2:2012

ANSI/UL 1283a-2013 电磁干扰滤波器安全性标准,公告日期 2012年9月21日

Standard for Safety for Electromagnetic Interference Filters, Bulletin dated September 21, 2012

ANSI/UL 1283-2013 电磁干扰滤波器安全性标准(公告日期 2012年4月17日)

Standard for Safety for Electromagnetic Interference Filters (Bulletin dated April 27, 2012)

BS EN 60862-2:2012 符合评估质量的表面声波 (SAW) 过滤器. 使用指南

Surface acoustic wave (SAW) filters of assessed quality Guidelines for the use

YD/T 2323-2011 通信用低压并联型有源电力滤波器

本标准规定了低压并联型有源电力滤波器的定义、分类、技术要求、试验方法、检验规则、标志、包装、运输、贮存等。本标准适用于通信用低压并联型有源电力滤波器，以下简称滤波器。

Low-voltage parallel active power filter for telecommunications

DIN EN 60939-1:2011 抑制电磁干扰用无源滤波装置.第1部分:通用规范(IEC 60939-1-2010).德文版本EN 60939-1-2010

Passive filter units for electromagnetic interference suppression - Part 1: Generic specification (IEC 60939-1:2010); German version EN 60939-1:2010

NF C93-030-1*NF EN 60939-1:2011 抑制电磁干扰用无源滤波器装置.第1部分:总规范.

Passive filter units for electromagnetic interference suppression - Part 1 : generic specification.

LST EN 60939-1-2011 抑制电磁干扰的无源滤波器单元 第1部分：通用规范（IEC 60939-1:2010）

Passive filter units for electromagnetic interference suppression -- Part 1: Generic specification (IEC 60939-1:2010)

DS/EN 60939-1:2010 用于抑制电磁干扰的无源滤波器单元 第1部分：通用规范

IEC 60939-1:2010 relates to passive filter units for electromagnetic interference suppression for use within, or associated with, electronic or electrical equipment and machines. Both single and multi-channel filters within one enclosure are included within the scope of this generic specification. This generic specification establishes standard terms, inspection procedures and methods of test for use in sectional and detail specifications within the IECQ-CECC system for electronic components. This edition includes the following significant technical changes with respect to the previous edition: a) table 3 has been updated, specifying how to handle the Neutr

Passive filter units for electromagnetic interference suppression - Part 1: Generic specification

BS EN 60939-1:2010 抑制电磁干扰用无源滤波装置.总规范

This generic specification relates to passive filter units for electromagnetic interference suppression for use within, or associated with, electronic or electrical equipment and machines. Both single and multi-channel filters within one enclosure are included within the scope of this generic specification. Filters constructed of capacitive elements where the inductance is inherent in the construction of the filter are within the scope of this specification. Similarly, filters constructed of inductive elements where the capacitance is inherent in the construction of the filter are also within the scope of this generic specification. The manufacturer should state whether a given component is to be designed as a capacitor, an inductor or a filter. The filter units within the scope of this generic specification are further distinguished as those for which safety tests are appropriate (e.g. those connected to mains supplies) and those for which such tests are not appropriate. A separate sectional specification covers the passive filter units for which safety tests are appropriate. This generic specification establishes standard terms, inspection procedures and methods of test for use in sectional and detail specifications within the IECQ-CECC system for electronic components.

Passive filter units for electromagnetic interference suppression. Generic specification

IEC 60939-1:2010 抑制电磁干扰用无源滤波装置.第1部分:通用规范

This generic specification relates to passive filter units for electromagnetic interference suppression for use within, or associated with, electronic or electrical equipment and machines. Both single and multi-channel filters within one enclosure are included within the scope of this generic specification. Filters constructed of capacitive elements where the inductance is inherent in the construction of the filter are within the scope of this specification. Similarly, filters constructed of inductive elements where the capacitance is inherent in the construction of the filter are also within the scope of this generic specification. The manufacturer should state whether a given component is to be designed as a capacitor, an inductor or a filter. The filter units within the scope of this generic specification are further distinguished as those for which safety tests are appropriate (e.g. those connected to mains supplies) and those for which such tests are not appropriate. A separate sectional specification covers the passive filter units for which safety tests are appropriate. This generic specification establishes standard terms, inspection procedures and methods of test for use in sectional and detail specifications within the IECQ-CECC system for electronic components.

Passive filter units for electromagnetic interference suppression - Part 1: Generic specification

DIN EN 60939-1 Berichtigung 1:2009 抑制电磁干扰用无源滤波器.第1部分:一般规范(IEC 60939-1-2005+勘误表-2005).德文版本EN 60939-1-2005,DIN EN 60939-1(VDE 0565-3)-2006-05勘误表.德文版本CENELEC-Cor.-2009至EN 60939-1

Passive filter units for electromagnetic interference suppression - Part 1: Generic specification (IEC 60939-1:2005 + Corrigendum: 2005); German version EN 60939-1:2005, Corrigendum to DIN EN 60939-1 (VDE 0565-3):2006-05; German version CENELEC-Cor.:2009

DLA MS24502 REV E VALID NOTICE 3-2007 机场进场照明玻璃标记滤波器

MS24502E, dated 30 May 2002, has been reviewed and determined to be valid for use in acquisition.

FILTER, MARKER LIGHT, AIRPORT RUNWAY, GLASS

DLA MS24489 REV D VALID NOTICE 3-2007 机场着陆照明玻璃标记滤波器

The activities above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil.

FILTER, MARKER LIGHT, AIRPORT APPROACH, GLASS

DLA A-A-55090 A VALID NOTICE 1-2007 射频干扰滤波器

A-A-55090A, dated 17 September 2001, has been reviewed and determined to be valid for use in acquisition.

FILTER, RADIO FREQUENCY INTERFERENCE

DLA A-A-55167 B VALID NOTICE 1-2007 射频干扰滤波器

A-A-55167B, dated 17 September 2001, has been reviewed and determined to be valid for use in acquisition.

FILTER, RADIO FREQUENCY INTERFERENCE