43.100 乘用车、篷车和轻型挂车 标准查询与下载
共找到 388 条与 乘用车、篷车和轻型挂车 相关的标准，共 26 页
Passenger cars. Validation of vehicle dynamic simulation. Sine with dwell stability control testing
- ICS
- 43.100
- CCS
- T41
- 发布
- 2016-09-30
- 实施
- 2016-09-30
本标准规定了电动汽车用公共充电基础设施的技术要求、试验方法、标志和标识、公共平台监控。 本标准适用于在上海市建设的电动乘用车用公共充电基础设施，上海市建设的电动商用车用公共充电基础设施可参照本标准相关内容。
General technical specification for public charging infrastructure for electric vehicles
- ICS
- 43.100
- CCS
- T47
- 发布
- 2016-09-26
- 实施
- 2016-12-01
本标准规定了新能源汽车（主要是指纯电动汽车、插电混合动力汽车等电动汽车）术语定义、充电设施符号、标志与标志设置要求、APP指引。 本标准适用于上海市行政区域内具有新能源汽车充换电功能的公共场所或区域，包括新能源汽车充电设施、具有新能源汽车充电设施的停车场、交通场站及道路等，用于指引和显示新能源汽车充电设施的位置、方向及功能。
Specifications for setting road traffic guidance signs for energy supply systems Part 1: Charging and replacing batteries
- ICS
- 43.100
- CCS
- T47
- 发布
- 2016-07-01
- 实施
- 2016-11-01
This is the fourth edition of the CSA Z240 MH Series of Standards, Manufactured homes. It supersedes the previous edition, published in 2009, and in 1992 and 1986 under the title Mobile Homes. Significant changes since the previous edition include the following: a) In CSA Z240.0.1, General requirements for manufactured homes: i) transfer of technical requirements that reference codes to CSA Z240.2.1; ii) deletion of provisions duplicating requirements in CSA Z240.2.1; and iii) reference to CSA A277 for marking and installation instructions. b) In CSA Z240.2.1, Structural requirements for manufactured homes: i) revision of title to recognize the scope of the standard; ii) elimination of unnecessary duplication and some further alignment with the requirements of the National Building Code of Canada (NBC), through a general reference to the NBC and retention of specific provisions as necessary to address issues particular to manufactured homes; and iii) updating and addition of requirements to improve the energy efficiency of manufactured homes. c) In CSA Z240.4.1, Installation requirements for gas- and oil-burning appliances in manufactured homes: i) expansion of scope to include requirements for oil-burning appliances to avoid duplication of many provisions; and ii) retention of provisions only as necessary to address issues particular to manufactured homes. d) In CSA Z240.5.1, Installation requirements for oil-burning appliances in manufactured homes: i) withdrawal; and ii) provisions necessary to address issues particular to manufactured homes moved to CSA Z240.4.1. e) In CSA Z240.9.1, Load calculation and duct design requirements for heating and cooling of manufactured homes: i) withdrawal; and ii) provisions necessary to address issues particular to manufactured homes moved to CSA Z240.2.1. These Standards are considered suitable for use for conformity assessment within the stated scopes of the Standards. These Standards were prepared by the Technical Committee on Factory Certification of Buildings, under the jurisdiction of the Strategic Steering Committee on Building Products and Systems, and have been formally approved by the Technical Committee.
Manufactured homes
- ICS
- 43.100
- CCS
- 发布
- 2016-04-01
- 实施
Guide to Rational Energy Utilization of Taxi
- ICS
- 43.100
- CCS
- T41
- 发布
- 2015-12-30
- 实施
- 2016-07-01
Passenger cars－Free-steer behaviour－Part 2：Steering-pulse open-loop test method
- ICS
- 43.100
- CCS
- 发布
- 2015-12-28
- 实施
Passenger cars－Free-steer behaviour－Part 2：Steering-pulse open-loop test method
- ICS
- 43.100
- CCS
- 发布
- 2015-12-28
- 实施
Scope is not provided for this standard
Road vehicles -- Dimensional codes for passenger cars
- ICS
- 43.100
- CCS
- 发布
- 2015-12-21
- 实施
Scope is not provided for this standard
Road vehicles -- Trailers up to 3,5 t -- Requirements for jockey wheels and drawbar supports
- ICS
- 43.100
- CCS
- 发布
- 2015-12-21
- 实施
本标准规定了纯电动出租车的术语和定义、要求、试验方法、标志、包装、运输、储存。 本标准适用于广东省行政区域范围内营运的M1类纯电动出租车。
General Technical Conditions for Operating Electric Vehicles Part 2: Pure Electric Taxi
- ICS
- 43.100
- CCS
- T41
- 发布
- 2015-12-18
- 实施
- 2016-04-18
Residential park homes. Specification
- ICS
- 43.100
- CCS
- P33
- 发布
- 2015-11-30
- 实施
- 2015-11-30
本技术标准规定了电动乘用车用整车控制器的硬件性能及可靠性的测试评价方法，作为企业内部对整车控制器进行评价的依据，也可适用于基于电动汽车、混合动力汽车的整车控制器的评价。 本标准对电动汽车整车控制器的功能状态做了5种级别的区分，并给出了电源测试、短路测试、耐环境性能测试、电磁兼容性能测试5项测试内容，可对整车控制器硬件性能及可靠性进行系统的测试及评价。其中，电源测试包括供电电压范围测试、漏电流测试、电源反接测试、过电压测试、电压波动测试、电压中断测试等6小项；短路测试单独一项；耐环境性能测试包括低温启动性
Electric vehicle controller test and evaluation specification
- ICS
- 43.100
- CCS
- C364
- 发布
- 2015-11-05
- 实施
- 2017-08-11
Technical requirements for the operation of rental passenger cars
- ICS
- 43.100
- CCS
- T41
- 发布
- 2015-09-23
- 实施
- 2016-01-01
This International Standard defines the distribution of the transportable mass for passenger cars, and specifies — a conventional average mass for passengers, and — a conventional mass for luggage. The total of the masses thus defined represents nominal design pay mass for a given vehicle. This International Standard applies to passenger cars as defined in ISO 3833.
Passenger cars -- Mass distribution
- ICS
- 43.100
- CCS
- 发布
- 2015-09-03
- 实施
This International Standard specifies a lateral stability test for passenger-car and trailer combinations. It is applicable to passenger cars in accordance with ISO 3833, and also to light trucks, and their trailer combinations. The lateral stability test determines the damping characteristic of the yaw oscillation of such towing-vehicle-trailer combinations excited by a defined steering impulse. The combination is initially driven in a steady-state, straight-ahead driving condition. Oscillation of the vehicle is then initiated by the application of a single impulse of steering, followed by a period in which steering is held fixed and the oscillation of the combination is allowed to damp out. Testing is conducted at several constant speeds. Where non-periodic instability is of interest, a steady-state circular test is specified.
Road vehicles -- Passenger-car and trailer combinations -- Lateral stability test
- ICS
- 43.100
- CCS
- 发布
- 2015-09-03
- 实施
This International Standard specifies open-loop test methods to determine the reactions of a vehicle in a turn to a sudden drop in motive power resulting from release of the accelerator pedal. It applies to passenger cars as defined in ISO 3833. The open-loop manoeuvre specified in this test method is not representative of real driving conditions, but is useful to obtain measures of a vehicle’s power-off behaviour resulting from specific types of control inputs under closely controlled test conditions.
Passenger cars -- Power-off reaction of a vehicle in a turn -- Open-loop test method
- ICS
- 43.100
- CCS
- 发布
- 2015-09-03
- 实施
本标准规定了上海市加油加气站内，电动汽车充电设施建设应遵循的主要技术要求。 本标准适用于交流标称电压不超过690V，直流标称电压不超过1000V的电动车辆传导式充电设备。 本标准适用于上海市加油加气站内配套电动汽车充电设施的建设与改造，换电站也可参照实施。
Technical specifications for the construction of electric vehicle charging facilities at refueling (gas) stations
- ICS
- 43.100
- CCS
- T47
- 发布
- 2015-07-29
- 实施
- 2015-10-01
Leisure karts - Part 1: Safety requirements and test methods for karts; German version EN 16230-1:2013+A1:2014
- ICS
- 43.100
- CCS
- T44
- 发布
- 2015-04
- 实施
Evaluation of exterior protrusion of passenger cars
- ICS
- 43.100
- CCS
- 发布
- 2014-12-08
- 实施
Measuring method of automobile exterior dimensions
- ICS
- 43.100
- CCS
- 发布
- 2014-12-08
- 实施
