47.080 小型船 标准查询与下载

23/30427931 DC BS EN ISO 10239 小型工艺品 液化石油气 (LPG) 系统

BS EN ISO 10239. Small craft. Liquefied petroleum gas (LPG) systems

KS V 0103-2022 小艇.海上试验的试验方法

Small craft — Test method at sea trials

KS V ISO 12215-5:2022 小艇.船体结构和尺寸.第5部分:单船体的设计压力、设计应力和尺寸测定

Small craft — Hull construction and scantlings — Part 5: Design pressures, design stresses and scantlings determination for monohulls

KS V ISO 12215-5-2022 小艇.船体结构和尺寸.第5部分:单船体的设计压力、设计应力和尺寸测定

Small craft — Hull construction and scantlings — Part 5: Design pressures, design stresses and scantlings determination for monohulls

EN ISO 9094:2022 小艇.消防

This document defines a practical degree of fire prevention and protection intended to provide enough time for occupants to escape a fire on board small craft. It applies to small craft having a length of the hull (LH) of up to 24 m except for personal watercraft. This document does not cover: — the design and installation of permanently installed galley stoves and heating appliances (including components used to distribute the heat) using fuels that are liquid at atmospheric pressure on small craft, which are covered by ISO 14895:2016; — carbon monoxide detecting systems, which are covered by ISO 12133.

Small craft - Fire protection (ISO 9094:2022)

ISO 12217-3:2022 小艇.稳定性和浮力评估和分类.第3部分:船体长度小于6m的船

This document specifies methods for evaluating the stability and buoyancy of intact (i.e. undamaged) boats. The flotation characteristics of craft susceptible to swamping are also encompassed. The evaluation of stability and buoyancy properties using this document will enable the boat to be assigned to a design category (C or D) appropriate to its design and maximum load. This document is applicable to boats of hull length less than 6 m, whether propelled by human or mechanical power, except habitable sailing multihulls. Boats of hull length less than 6 m which are fitted with a full deck and quick-draining cockpit(s) complying with ISO 11812 can alternatively be assessed using ISO 12217-1 or ISO 12217-2 (for non-sailing and sailing boats, respectively), in which case higher design categories can be assigned. In relation to habitable multihulls, this document includes assessment of susceptibility to inversion, definition of viable means of escape and requirements for inverted flotation. This document excludes: — inflatable and rigid-inflatable boats covered by the ISO 6185 series, except for references made in — personal watercraft covered by ISO 13590 and other similar powered craft; — aquatic toys; — canoes and kayaks; — gondolas and pedalos; — sailing surfboards; — surfboards, including powered surfboards; — hydrofoils, foil stabilized boats and hovercraft when not operating in the displacement mode; and — submersibles. NOTE Displacement mode means that the boat is only supported by hydrostatic forces. It does not include or evaluate the effects on stability of towing, fishing, dredging or lifting operations, which need to be separately considered if appropriate. 1

Small craft — Stability and buoyancy assessment and categorization — Part 3: Boats of hull length less than 6 m

ISO 12217-2:2022 小艇.稳定性和浮力评估和分类.第2部分:船体长度大于或等于6m的帆船

This document specifies methods for evaluating the stability and buoyancy of intact (i.e. undamaged) boats. The flotation characteristics of boats susceptible to swamping are also encompassed. The evaluation of stability and buoyancy properties using this document will enable the boat to be assigned to a design category (A, B, C or D) appropriate to its design and maximum load. This document is principally applicable to boats propelled primarily by sail (even if fitted with an auxiliary engine) of 6 m up to and including 24 m hull length. However, it can also be applied to boats less than 6 m if they are habitable multihulls or can be applied if they do not attain the desired design category specified in ISO 12217-3 and they are decked and have quick-draining recesses which comply with ISO 11812. In relation to habitable multihulls, this document includes assessment of susceptibility to inversion, definition of viable means of escape and requirements for inverted flotation. This document excludes: — inflatable and rigid-inflatable boats covered by the ISO 6185 series, except for references made in — gondolas and pedalos; — surfboards including sailing surfboards; and — hydrofoils and foil stabilized boats when not operating in the displacement mode. NOTE Displacement mode means that the boat is only supported by hydrostatic forces. It does not include or evaluate the effects on stability of towing, fishing, dredging or lifting operations, which need to be separately considered if appropriate.

Small craft — Stability and buoyancy assessment and categorization — Part 2: Sailing boats of hull length greater than or equal to 6 m

ISO 12217-1:2022 小艇 稳定性和浮性的评定与分类 第1部分:艇长长度不小于6米的非帆艇

This document specifies methods for evaluating the stability and buoyancy of intact (i.e. undamaged) boats. The flotation characteristics of boats susceptible to swamping are also encompassed. The evaluation of stability and buoyancy properties using this document will enable the boat to be assigned to a design category (A, B, C or D) appropriate to its design and maximum total load. This document is principally applicable to boats propelled by human or mechanical power of 6 m up to 24 m hull length. However, it can also be applied to boats of under 6 m if they do not attain the desired design category specified in ISO 12217-3 and they are decked and have quick-draining recesses which comply with ISO 11812. In relation to habitable multihulls, this document includes assessment of susceptibility to inversion, definition of viable means of escape and requirements for inverted flotation. This document excludes: — inflatable and rigid-inflatable boats covered by the ISO 6185 series, except for references made in — personal watercraft covered by ISO 13590 and other similar powered craft; — gondolas and pedalos; — sailing surfboards; — surfboards, including powered surfboards; — hydrofoils and hovercraft when not operating in the displacement mode; and — submersibles. NOTE Displacement mode means that the boat is only supported by hydrostatic forces. It does not include or evaluate the effects on stability of towing, fishing, dredging or lifting operations, which need to be separately considered if appropriate. 1

Small craft — Stability and buoyancy assessment and categorization — Part 1: Non-sailing boats of hull length greater than or equal to 6 m

ISO/CD 16315 小艇—电力推进系统

Small craft — Electric propulsion system

ISO/DIS 15085 小型船只——人员落水预防和救援

Small craft — Man-overboard prevention and recovery

BS EN ISO 13297:2020+A1:2022 小工艺品 电气系统 交流和直流安装

This document specifies the requirements for the design, construction and installation of the following types of DC and AC electrical systems, installed on small craft either individually or in combination: a) extra-low-voltage direct current (DC) electrical systems that operate at nominal potentials of 50 V DC or less; b) single-phase alternating current (AC) systems that operate at a nominal voltage not exceeding This document does not cover the following: — electrical propulsion systems of direct current less than 1 500 V DC, single-phase alternating current up to 1 000 V AC, and three-phase alternating current up to 1 000 V AC, which are addressed by ISO 16315; — any conductor that is part of an outboard engine assembly and that does not extend beyond the outboard engine manufacturers supplied cowling; — three-phase AC installations that operate at a nominal voltage not exceeding 500 V AC, which are addressed by IEC 60092-507.

Small craft. Electrical systems. Alternating and direct current installations

BS EN ISO 15083:2020+A1:2022 小工艺品 舱底泵系统

This document specifies requirements for pumping or alternative means designed to remove normal accumulations of bilge water for small craft with a length of hull, LH, as defined in ISO 8666:2020, of up to 24 m. This document does not set requirements for bilge pumps or bilge-pumping systems designed for damage control.

Small craft. Bilge-pumping systems

BS EN ISO 25197:2020+A1:2022 小工艺品 用于转向、换档和油门的电气/电子控制系统

This document establishes the requirements for the design, construction and testing of electrical/electronic steering, shift and throttle systems and dynamic positioning control systems, or combinations thereof, on small craft of up to 24 m length of hull. This document does not apply to electric trolling motors and autopilot systems on sailing craft.

Small craft. Electrical/electronic control systems for steering, shift and throttle

ISO 9094:2022 小艇.防火

Small craft — Fire protection

ISO 10088:2022 小艇.永久安装的燃料系统

This document specifies the requirements for the design, materials, construction, installation and testing of permanently installed fuel systems as installed for internal combustion engines. It applies to all parts of permanently installed diesel and petrol fuel systems as installed, from the fuel fill opening to the point of connection with the propulsion or auxiliary engine(s) on inboard- and outboard-powered small craft. Requirements for the design and testing of petrol and diesel fuel tanks for internal combustion engines that are intended to be permanently installed in small craft are given in ISO 21487:2022.

Small craft — Permanently installed fuel systems

EN ISO 15083:2020/A1:2022 小艇.舱底泵吸系统 包含修改件A1,2022

Small craft - Bilge-pumping systems - Amendment 1 (ISO 15083:2020/Amd 1:2022)

22/30457320 DC BS EN ISO 8665-2 小工艺品 功率测量和声明 第 2 部分：电力船舶推进系统

BS EN ISO 8665-2. Small craft. Power measurements and declarations - Part 2. Electric marine propulsion

ISO 21487:2022 小艇.永久安装的汽油和柴油燃料箱

This document specifies requirements for the design, ins tallation and tes ting of petrol and diesel fuel tanks for internal combus tion engines, that are intended to be permanently ins talled in small craft.

Small craft — Permanently installed petrol and diesel fuel tanks

ISO 10240:2022 小艇.船东手册

This document specifies requirements and information for inclusion in the owner’s manual of small craft to enable the owner/operator to use the craft safely.

Small craft — Owner's manual

EN ISO 25197:2020/A1:2022 小工艺品,电子/电气控制系统为指导,转变和节流阀 包含修改件A1,2022

This document establishes the requirements for the design, construction and testing of electrical/electronic steering, shift and throttle systems and dynamic positioning control systems, or combinations thereof, on small craft of up to 24 m length of hull. This document does not apply to electric trolling motors and autopilot systems on sailing craft.

Small craft - Electrical/electronic control systems for steering, shift and throttle - Amendment 1 (ISO 25197:2020/Amd 1:2022)