49.060 航空航天用电气设备和系统 标准查询与下载

BS EN 2997-002:2022 航空航天系列 连接器 电气 圆形 通过螺纹环连接 耐火或不耐火 工作温度 65°C 至 175°C 连续 200°C 连续 260°C 峰值 性能指标及配合

1   Scope This document specifies the performance and contact arrangements of circular electrical connectors, coupled by threaded ring. It also lists the product standards and models available for selection in this series.

Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures. 65°C to 175°C continuous, 200°C continuous, 260°C peak. Specification of performance and co...

BS EN 2235:2022 航空航天系列 单芯和多芯电缆 屏蔽和护套 技术规格

1   Scope This document specifies the required characteristics, test methods, qualification and acceptance conditions of single and multicore cables, screened, jacketed and multicore jacketed cables for use in aircraft electrical systems.

Aerospace series. Single and multicore electrical cables, screened and jacketed. Technical specification

BS EN 2266-008:2022 航空航天系列 通用电气电缆 工作温度在 -55°C 至 200°C 之间 DRP（对）DRT（3 芯）DRQ（4 芯）系列 多芯 UV 激光打印护套电缆 产品标准

1   Scope This document specifies the characteristics of UV laser printable multicore jacketed electrical cables for use in the on-board electrical systems of aircraft at operating temperatures between −55 °C and 200 °C.

Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55 °C and 200 °C. DRP (pair) DRT (3 cores) DRQ (4 cores) family, multicore UV laser printable jacketed cable. Product standard

22/30466804 DC BS EN 3155-008 航空航天系列 连接元件中使用的电触点 第 008 部分 触点 电气 公头 A 型 压接 S 级 产品标准

BS EN 3155-008. Aerospace series. Electrical contacts used in elements of connection - Part 008. Contacts, electrical, male, type A, crimp, class S. Product standard

22/30466801 DC BS EN 3155-003 航空航天系列 连接元件中使用的电触点 第 003 部分 触点 电气 母头 A 型 压接 S 级 产品标准

BS EN 3155-003. Aerospace series. Electrical contacts used in elements of connection - Part 003. Contacts, electrical, female, type A, crimp, class S. Product standard

22/30394882 DC BS ISO 24065 航空航天 高功率固态电源控制器 一般性能要求

BS ISO 24065. Aerospace. High power solid state power controller. General performance requirements

BS EN 3645-001:2022 航空航天系列 连接器 电气、圆形、防舀、三重启动螺纹接头 工作温度连续 175 °C 或 200 °C 技术规格

1   Scope This document specifies the general characteristics, the conditions for qualification, acceptance and quality assurance, as well as the test programs and groups for threaded ring coupling circular connectors, fire resistant, intended for use in a temperature range from ‑65 °C to 175 °C continuous or 200 °C continuous according to the classes.

Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Technical specification

22/30462759 DC BS EN 6049-004 航空航天系列 电缆、安装 间位芳纶纤维保护套 第 004 部分 编织、管状、高可膨胀性 产品标准

BS EN 6049-004. Aerospace series. Electrical cables, installation. Protection sleeve in meta-aramid fibres - Part 004. Braided, tubular, high expandable. Product standard

BS EN 3660-064:2022 航空航天系列 用于圆形和矩形电气和光学连接器的电缆出口配件 电缆出口 K 型 直型 用于热缩护套 屏蔽 密封 自锁 产品标准

This document defines a range of cable outlets, style K, straight, shielded, sealed, self-locking (anti- rotational), heat shrinkable boot, and/or metallic bands for use under the following conditions: The mating connectors are listed in EN 3660-002. Temperature range, Class N: -65 °C to 200 °C; Class K: -65 °C to 260 °C; Class W: -65 °C to 175 °C; Class T: -65 °C to 175 °C (Nickel PTFE plating); Class Z: -65 °C to 175 °C (Black zinc nickel plating). Associated electrical accessories: EN 3660-033 Metallic band (for shield termination). These cable outlets are designed for termination of overall shielding braid and/or individual cable shields. They accommodate/permit the termination of heat shrinkable boots.

Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors - Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed, self-locking. Product standard

22/30461915 DC BS EN 4604-006 航空航天系列 用于信号传输的电气电缆 第 006 部分 电缆 同轴 50 欧姆 200 °C WM 型 产品标准

BS EN 4604-006. Aerospace series. Cable, electrical, for signal transmission. - Part 006. Cable, coaxial, 50 Ohms, 200 °C, type WM. Product standard

22/30461918 DC BS EN 4604-007 航空航天系列 用于信号传输的电气电缆 第 007 部分 电缆 同轴 50 欧姆 200 °C WN 型 产品标准

BS EN 4604-007. Aerospace series. Cable, electrical, for signal transmission. - Part 007. Cable, coaxial, 50 Ohms, 200 °C, type WN. Product standard

22/30462016 DC BS EN 3645-002 航空航天系列 连接器 电气 圆形 防舀 三重启动螺纹耦合 工作温度 175 °C 或 200 °C 连续 第 002 部分 性能和触点排列规范

BS EN 3645-002. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 002. Specification of performance and contact arrangements

BS EN 2349-001:2022 航空航天系列 开关设备的要求和测试程序

1   Scope This document specifies the requirements and test procedures of switching devices for use in aircraft electrical systems to EN 2282.

Aerospace series. Requirements and test procedures for switching devices

BS ISO 24071:2022 飞机 自耦变压器整流器单元（ATRU）一般要求

1   ​Scope This document specifies the general requirements and test methods for auto-transformer rectifier units (ATRUs) for use in aircraft electrical systems. This document is mainly applicable to ATRUs of 18-pulse and 24-pulse types.

Aircraft. Auto-transformer rectifier units (ATRUs). General requirements

BS ISO 2678:1985 飞机设备的环境测试 电气设备的绝缘电阻和高压测试

1   Scope and field of application This International Standard specifies requirements for tests to determine the electrical insulation resistance of equipment intended for use in aircraft, together with a high voltage test. It relates the insulation requirements to four categories of equipment. This International Standard does not deal with the insulation testing of equipment installed in aircraft.

Environmental tests for aircraft equipment. Insulation resistance and high voltage tests for electrical equipment

ISO 24071:2022 飞机.自耦变压器整流装置（ATRU）.一般要求

Aircraft — Auto-transformer rectifier units (ATRUs) — General requirements

BS EN 3373-001:2022 航空航天系列 用于压接电导体的端子接线片和串联接头 技术规格

1   Scope This document specifies the general characteristics, the conditions of qualification, acceptance and quality assurance, as well as the test programs and groups for terminal lugs and in-line splices designed for crimping on copper and copper alloy conductors and on aluminium and aluminium alloy conductors.

Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors. Technical specification

BS EN 3155-075:2022 航空航天系列 连接元件中使用的电触点 触点 电气 四轴 尺寸 8 母头 E 型 压接 R 级 产品标准

1   Scope This document specifies the required characteristics, tests and tooling applicable to female electrical quadrax contacts, shielded, size 8, type E characteristic impedance 100 Ω, crimp, class R, used in elements of connection according to EN 3155‑002. It is used together with EN 3155‑001. The associated male contacts are defined in EN 3155‑074.

Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, quadrax, size 8, female, type E, crimp, class R. Product standard

BS EN 3745-412:2022 航空航天系列 光纤和电缆、光学、飞机用途 测试方法 耐湿性

1   Scope This document evaluates the resistance of the fiber optic cable to humidity changes at different temperatures.

Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Humidity resistance

22/30457302 DC BS EN 2267-011 航空航天系列 通用电气电缆 工作温度在 -55 °C 至 260 °C 之间 第 011 部分 DZA 系列 用于低压环境的单核和多核组件 产品标准

BS EN 2267-011. Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55 °C and 260 °C - Part 011. DZA family, single and multicore assembly for use in low pressure atmosphere .Product standard