55.100 瓶、小罐、瓮 标准查询与下载

KS L 2501-2020 玻璃瓶

Glass bottle

KS L 2402-2020 碳酸饮料瓶碎片保留试验方法

Testing methods for the fragment retention of carbonated beverage bottles

PN-EN 16293-2020-11 E 包装 - 玻璃包装 - 用于静止葡萄酒的深 BVS 饰面

Packaging -- Glass Packaging -- Deep BVS finishes for still wines

SN EN 16293-2020 包装 玻璃包装 用于静止葡萄酒的深 BVS 饰面

Packaging - Glass Packaging - Deep BVS finishes for still wines

EC 1-2020 UNI EN ISO 12822:2020 玻璃包装 26 H 126 皇冠饰面 尺寸

Glass packaging - 26 H 126 crown finish - Dimensions

ASTM C224-78(2020) 玻璃容器采样标准实践

1.1 This practice covers the sampling of glass containers (for example, bottles, jars, and so forth) for performing such tests as mechanical strength, dimensions, and other measurable characteristics, and for visual examination. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Sampling Glass Containers

ASTM C147-86(2020) 玻璃容器内压强度的标准试验方法

1.1 These test methods cover the determination of the breaking strength of glass containers when subjected to internal pressure. These test methods are intended to determine the pressure strength of containers manufactured to contain products reasonably expected to develop a sustained pressure of 138 kPa (20 psi) or greater, after processing. Two test methods are covered as follows: Sections Test Method A—Application of Uniform Internal Pressure for a Predetermined Period 5 – 7 Test Method B—Application of Internal Pressure Increasing at a Predetermined Constant Rate 8 – 10 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Methods for Internal Pressure Strength of Glass Containers

BS EN 16293:2020 包装 玻璃包装 静止葡萄酒的深度 BVS 收尾

What is BS EN 16293 about?    BS EN 16293 discusses packaging. BS EN 16293 specifies dimensions for a series of deep screw finishes for the closure of wines with a CO2 content below 1,2 g per litre.   Bottle finishes can affect the ageing of the wine. Deep BVS finishes on the bottleneck ensure complete sealing to guarantee quality ageing, which results in a smooth wine.   Note: Carbonation ≥ 1,2 g/l CO2 requires a suitable container and closure agreed between the glassmaker, closure maker and packer/filler.  Who is BS EN 16293 for?   BS EN 16293 on

Packaging. Glass Packaging. Deep BVS finishes for still wines

EN ISO 12822:2020 玻璃包装. 26 H 126冠形盖瓶口. 尺寸

This document specifies the dimensions of the 26 mm-shallow crown finish for glass bottles containing beverages. The shallow crown finish is designed to use a metal crown cap (see Reference [2]).

Glass packaging - 26 H 126 crown finish - Dimensions (ISO 12822:2020)

ISO 12822:2020 玻璃包装 - 26 H 126皇冠表面处理 - 尺寸

This document specifies the dimensions of the 26 mm-shallow crown finish for glass bottles containing beverages. The shallow crown finish is designed to use a metal crown cap (see Reference [2]).

Glass packaging — 26 H 126 crown finish — Dimensions

BS EN ISO 12821:2019 玻璃包装 26 H 180 冠饰面 方面

What is ISO 12821  - Glass packaging about?    ISO 12821 is an international standard that focuses on glass packaging and dimensions. ISO 12821 specifies the dimensions of the 26 mm tall crown finish for glass bottles containing   beverages. The tall crown finish is designed to use a metal crown cap. ISO 12821 also specifies the dimensional requirements that are of direct importance to the customer/bottler and recommendations for cap application.   The gasket material and profile are no...

Glass packaging. 26 H 180 crown finish. Dimensions

EN ISO 12821:2019 玻璃包装.26H180冠形盖瓶口.尺寸规格

This document specifies the dimensions of the 26 mm tall crown finish for glass bottles containing beverages. The tall crown finish is designed to use a metal crown cap (see e.g. EN 17177).

Glass packaging - 26 H 180 crown finish - Dimensions (ISO 12821:2019)

ISO 12821:2019 玻璃包装 - 26 H 180冠面表面处理 - 尺寸

This document specifies the dimensions of the 26 mm tall crown finish for glass bottles containing beverages. The tall crown finish is designed to use a metal crown cap (see e.g. EN 17177).

Glass packaging — 26 H 180 crown finish — Dimensions

ASTM F3375-19 液体消费品用非计量限制输送系统评定的标准试验方法

1.1 This test method covers assessment of non-metered restricted delivery system characteristics so that they can be evaluated to a standard that signifies efficacy in limiting accessibility of liquid contents to young children. 1.2 This test method provides general test conditions for the determination of flow control of liquids by restricted delivery systems using mechanical testing to simulate methods that may be used to access liquid consumer products by young children. 1.3 The test parameters provided within this test method are estimates based on existing literature and experience. The estimated values are intended to allow comparison of performance characteristics across different restricted delivery systems. 1.4 This test method applies to liquids packaged in reclosable containers. NOTE 1—Since there are many variables that may affect release of liquid (for example, rigidity of container, viscosity of liquid contents, or variation in test equipment), it is important that the entire restricted delivery system is tested together as intended for use while using the same or similar testing equipment. This test method does not address other product characteristics that might be affected by use of restricted delivery systems (for example, uniformity of active ingredient throughout duration of use). 1.5 Units—The values stated in either SI units or inchpound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Assessing Non-Metered Restricted Delivery Systems for Liquid Consumer Products

BS EN 17177:2019 玻璃包装 皇冠帽 直径 26 毫米 高度 6 毫米皇冠盖

What is BS EN 17177 - Glass packaging with a crown cap about?    BS EN 17177 focuses on glass packaging with a crown cap. BS EN 17177 specifies the dimensional requirements for the 26 mm diameter, 6 mm height crown cap, lined with a plastic gasket and designed to seal bottles with neck finishes foreseen for pry-off or twist-crown applications.   BS EN 17177 specifies the dimensional requirements that are of direct importance to the customer/bottler and recommendations for cap application.   The gasket material and profile are not specified as several different profiles are ava...

Glass packaging. Crown cap. 26 mm diameter, 6 mm height crown cap

BS EN 12726:2018 包装. 口径为18.5 mm的瓶口用软木塞和锥度明显的瓶塞

Packaging. Cork mouth finish with a bore diameter of 18,5 mm for corks and tamper evident capsules

T/XXRL 04-2018 阻隔防爆专用油桶技术标准

4.1  产品分类和标记 4.1.1  按阻隔防爆材料分类 4.1.2  阻隔防爆专用油桶的分类 4.1.3  标记 4.2　工作条件 4.3　制造要求 4.4　安全警示标志

Technical standard for barrier explosion-proof special oil barrels

JIS S 2350:2017 带有容量指示的玻璃容器

Glass container with content volume indicated

DIN 6106:2017 包装.玻璃容器.侧边和底部凸起部

This Standard specifies constructions of side- and base spotting bars for orientation of glass containers. These constructions are adapted to the locking rams used in practice.

Packaging - Glass containers - Side and base bosses

DIN EN 17177:2017 玻璃包装. 冠盖. 26 mm中深冠盖：德文和英文版本prEN 17177:2017

This document gives specifications for the 26 millimetres intermediate depth crown cap, lined with a plastic gasket and designed to seal bottles conforming typically but not exclusively to ISO 12821 and ISO 12822 standards for pry-off and pr EN (WI 00261441) and pr EN (WI 00261442) for twist-off. It specifies the dimensional requirements that are of direct importance to the customer/bottler and recommendations for cap application. The gasket material and profile are not specified as a number of different profiles are available depending on the end use and supplier specific technology.

Glass packaging - Crown cap - 26 mm intermediate depth crown cap; German and English version prEN 17177:2017