55.180.10 通用集装箱 标准查询与下载

JT/T 1441-2022 集装箱二维码通用技术规范

本标准适用于集装箱二维码的设计、生产和使用。

General Technical Specifications for Container QR Codes

KS T ISO 1496-2-2022 系列1货运集装箱 规范和测试 第2部分：保温集装箱

Series 1 freight containers－Specification and testing－Part 2：Thermal containers

KS T 1712-2022 冷卷箱性能试验方法

Performance test method for cold roll box

KS T ISO 1496-3-2022 系列1货运集装箱 规范和测试 第3部分：液体、气体和加压干散货罐式集装箱

Series 1 freight containers－Specification and testing－Part 3：Tank containers for liquids, gases and pressurized dry bulk

KS T ISO 9897-2022 系列1货运集装箱 集装箱设备数据交换（CEDEX） 通用通信代码

Series 1 freight containers－Container equipment data exchange(CEDEX)－General communication codes

KS T ISO 10368-2022 货运保温容器 远程状态监测

Freight thermal containers－Remote condition monitoring

KS T ISO 1496-4-2022 系列1货运集装箱 规范和测试 第4部分：干散货非加压集装箱

Series 1 freight containers－Specification and testing－Part 4：Non－pressurized containers for dry bulk

KS T ISO 3874-2022 系列 1 货运集装箱 装卸和系固

Series 1 freight containers－Handling and securing

BS ISO 668:2020+A1:2022 系列 1 货运集装箱 分类、尺寸和额定值

1   Scope This document establishes a classification of series 1 freight containers based on external dimensions, and specifies the associated ratings and, where appropriate, the minimum internal and door opening dimensions for certain types of containers. These containers are intended for intercontinental traffic. This document summarizes the external and some of the internal dimensions of series 1 containers. The dimensions of each type of container are defined in the appropriate part of ISO 1496, which is the authoritative document for internal container dimensions.

Series 1 freight containers. Classification, dimensions and ratings

GSO ISO 1496-3:2022 系列 1 货运集装箱 规范和测试 第3部分：液体、气体和加压干散货罐式集装箱

This document specifies the basic specifications and testing requirements for ISO series 1 tank containers suitable for the carriage of gases, liquids and solid substances (dry bulk) which can be loaded or unloaded as liquids by gravity or pressure discharge, for international exchange and for conveyance by road, rail and sea, including interchange between these forms of transport. Except where otherwise stated, the requirements of this document are minimum requirements.

Series 1 freight containers — Specification and testing — Part 3: Tank containers for liquids, gases and pressurized dry bulk

GSO ISO 3874:2022 系列 1 货运集装箱 搬运和固定

ISO 3874:2017 specifies the methods of handling and securing series 1 freight containers built and tested to comply with ISO 1496 (all parts). Methods of handling and securing are described for both loaded and empty containers. The conditions for lifting different types of loaded and empty containers are laid down in Clause 6.

Series 1 freight containers — Handling and securing

GSO ISO 668:2022 系列 1 货运集装箱 分类、尺寸和等级

This document establishes a classification of series 1 freight containers based on external dimensions, and specifies the associated ratings and, where appropriate, the minimum internal and door opening dimensions for certain types of containers. These containers are intended for intercontinental traffic. This document summarizes the external and some of the internal dimensions of series 1 containers. The dimensions of each type of container are defined in the appropriate part of ISO 1496, which is the authoritative document for internal container dimensions.

Series 1 freight containers — Classification, dimensions and ratings

GSO ISO 1496-5:2022 系列 1 货运集装箱 规范和测试 第5部分：平台和基于平台的集装箱

This document specifies the basic specifications and testing requirements for ISO series 1 freight containers of the platform and platform-based types designated 1AAA, 1AA, 1A, 1AX, 1BBB, 1BB, 1B, 1BX, 1CC, 1C and 1CX which are suitable for international exchange and for conveyance by road, rail and sea, including interchange between these forms of transport, with certain limitations (for example, when loaded, platforms cannot be stacked or top lifted by means of conventional spreaders).

Series 1 freight containers — Specification and testing — Part 5: Platform and platform-based containers

EN ISO 6346:2022 集装箱.代码,识别和标记

This document provides a system for the identification and presentation of information about freight containers. The identification system is intended for general application, for example in documentation, control and communications (including automatic data processing systems), as well as for display on the containers themselves. The methods of displaying identification and certain other data (including operational data) on containers by means of permanent marks are included. This document specifies: a) a container identification system, with an associated system for verifying the accuracy of its use, having: — mandatory marks for the presentation of the identification system for visual interpretation, and — features to be used in optional Automatic Equipment Identification (AEI) and electronic data interchange (EDI); b) a coding system for data on container size and type, with corresponding marks for their display; c) operational marks, both mandatory and optional; d) physical presentation of marks on the container. The terms “mandatory” and “optional” in this document are used to differentiate those ISO marking provisions which shall necessarily be fulfilled by all containers from those which are not required of all containers. The optional marks are included to further comprehension and promote uniform application of the optional mark. If a choice has been made to display an optional mark, the provisions laid down in this document relating to the mark shall be applied. The terms “mandatory” and “optional” do not refer to requirements of any regulatory body. This document applies to all freight containers covered by International Standards ISO 668, parts 1 to 5 of ISO 1496, ISO 8323 and should, wherever appropriate and practicable, be applied: — to containers other than those covered by the International Standards mentioned in Clause 2; — to container-related and/or detachable equipment. NOTE 1 Containers marked according to previous editions of ISO 6346 need not be re-marked. This document does not cover temporary operational marks of any kind, permanent marks, data plates, etc. which may be required by intergovernmental agreements, national legislation or nongovernmental organizations. NOTE 2 Some of the major international conventions whose container-marking requirements are not covered in this document are as follows: — International Convention for Safe Containers (1972, as amended) (CSC), International Maritime Organization (IMO); — Customs Convention on Containers 1956 and 1972, related to temporary admission and transport under customs seal. — Convention on Temporary Admission (Istanbul, 26 June 1990), related to temporary admission. It should not be assumed that this list is exhaustive. This document does not cover the display of technical data on tank containers (see ISO 1496-3), nor does it, in any way, include identification marks or safety signs for items of cargo which may be carried in freight containers.

Freight containers - Coding, identification and marking (ISO 6346:2022, Corrected version 2022-08)

ISO 6346:2022 货运集装箱.编码、识别和标记

1.1 This document provides a system for the identification and presentation of information about freight containers. The identification system is intended for general application, for example in documentation, control and communications (including automatic data processing systems), as well as for display on the containers themselves. The methods of displaying identification and certain other data (including operational data) on containers by means of permanent marks are included. 1.2 This document specifies: a) a container identification system, with an associated system for verifying the accuracy of its use, having: — mandatory marks for the presentation of the identification system for visual interpretation, and — features to be used in optional Automatic Equipment Identification (AEI) and electronic data interchange (EDI); b) a coding system for data on container size and type, with corresponding marks for their display; c) operational marks, both mandatory and optional; d) physical presentation of marks on the container. 1.3 The terms “mandatory” and “optional” in this document are used to differentiate those ISO marking provisions which shall necessarily be fulfilled by all containers from those which are not required of all containers. The optional marks are included to further comprehension and promote uniform application of the optional mark. If a choice has been made to display an optional mark, the provisions laid down in this document relating to the mark shall be applied. The terms “mandatory” and “optional” do not refer to requirements of any regulatory body. 1.4 This document applies to all freight containers covered by International Standards ISO 668, parts 1 to 5 of ISO 1496, ISO 8323 and should, wherever appropriate and practicable, be applied: — to containers other than those covered by the International Standards mentioned in Clause 2; — to container-related and/or detachable equipment. NOTE 1 Containers marked according to previous editions of ISO 6346 need not be re-marked. 1.5 This document does not cover temporary operational marks of any kind, permanent marks, data plates, etc. which may be required by intergovernmental agreements, national legislation or nongovernmental organizations. NOTE 2 Some of the major international conventions whose container-marking requirements are not covered in this document are as follows: — International Convention for Safe Containers (1972, as amended) (CSC), International Maritime Organization (IMO); 1 — Customs Convention on Containers 1956 and 1972, related to temporary admission and transport under customs seal. — Convention on Temporary Admission (Istanbul, 26 June 1990), related to temporary admission. It should not be assumed that this list is exhaustive. This document does not cover the display of technical data on tank containers (see ISO 1496-3), nor does it, in any way, include identification marks or safety signs for items of cargo which may be carried in freight containers.

Freight containers — Coding, identification and marking

ASTM D5487-16(2022) 用冲击机模拟已装载容器跌落的标准试验方法

1.1 This test method covers the general procedures of using shock machines to replicate the effects of vertical drops of loaded shipping containers, cylindrical containers, and bags and sacks. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Simulated Drop of Loaded Containers by Shock Machines

ISO 668:2020/Amd 1:2022 系列1货运集装箱.分类 尺寸和额定值.修改件1

Series 1 freight containers — Classification, dimensions and ratings — Amendment 1

JT/T 1407-2022 系列2集装箱 堆场技术管理要求

Technical management requirements for series 2 container yards

T/CCIASD 1001-2021 集装箱冲击试验规范

本文件规定了集装箱冲击试验的试验流程、通用要求、试验方法、评价原则、试验报告等内容。 本文件适用于液体、气体、加压干散货罐式集装箱和管束式集装箱以及用于中国境内铁路运输危险货物的罐式集装箱冲击试验，其它集装箱可参照使用。

Specifications for impact test of containers

T/SCA 018-2021 工业互联网集装箱二级节点平台应用接口规范

本文件规定了工业互联网集装箱二级节点平台与第三方平台之间数据通信的对接流程与要求、数据交换格式和通信安全机制。 本文件适用于工业互联网集装箱二级节点平台与第三方平台之间的数据交换。 （1）术语和定义 本文件定义了“集装箱身份标识”和“工业互联网集装箱二级节点平台”两个术语，“集装箱身份标识”即集装箱行业唯一的标识编码；“工业互联网集装箱二级节点平台”即国家工业互联网集装箱行业标识解析二级节点平台。 （2）对接流程与要求 本文件规定了集装箱二级节点平台与第三方平台之间的对接流程及要求，包括账号注册、获取Usertoken、请求集装箱标识列表、主动请求数据或被动接收数据。 （3）数据交换格式 本文件规定了集装箱二级节点平台与第三方平台之间的数据交换格式，包括获取Usertoken、服务器IP地址或域名设置、请求集装箱标识列表、标识检索、标识历史数据检索、设置数据推送URL地址、第三方平台接收推送。 （4）通信安全机制 本文件规定了集装箱二级节点平台与第三方平台建立连接后，需要满足的数据安全要求和网络安全要求。

Application interface specification for secondary-level node platform of freight container