共找到 862 条与 纺织纤维综合 相关的标准,共 58 页
Textiles. Quantitative chemical analysis. Mixtures of viscose or certain types of cupro or modal or lyocell with flax fibres (method using formic acid and zinc chloride)
Textiles - Quantitative chemical analysis - Part 22: Mixtures of viscose or certain types of cupro or modal or lyocell with flax fibres (method using formic acid and zinc chloride) (ISO 1833-22:2020)
Textiles - Quantitative chemical analysis - Part 22: Mixtures of viscose or certain types of cupro or modal or lyocell with flax fibres (method using formic acid and zinc chloride) (ISO 1833 22:2020)
Installation of textile floor coverings. Code of practice
This European Standard specifies a procedure for determination of metals, in particular antimony (Sb), arsenic (As), cadmium (Cd), chromium (Cr), cobalt (Co), copper (Cu), lead (Pb), mercury (Hg), nickel (Ni) in natural and man-made textiles, including coated fabrics and garment components (e.g. buttons, zips, etc.) after microwave digestion.
Textiles - Determination of metal content - Part 1: Determination of metals using microwave digestion
Azo colorants that are able to form 4-aminoazobenzene, generate under the conditions of ISO 14362-1, the amines aniline and 1,4-phenylenediamine. The presence of these 4-aminoazobenzene colorants cannot be reliably ascertained without additional information (e.g. the chemical structure of the colorant used) or without a special procedure. ISO 14362-3:2017 is supplementary to ISO 14362-1 and describes a special procedure to detect the use, in commodities, of certain azo colorants, which may release 4-aminoazobenzene, and that are - accessible to reducing agent without extraction, particularly concerning textiles made of cellulose and protein fibres (e.g. cotton, viscose, wool, silk), and - accessible by extracting the fibres (e.g. polyester or imitation leather). For certain fibre blends, in 9.3 and 9.4 (with and without extraction) may need to be applied. The procedure also detects 4-aminoazobenzene (Solvent Yellow 1), which is already available as free amine in commodities without reducing pre-treatment. The use of certain azo colorants, which may release, by reductive cleavage of their azo group(s), one or more of the other aromatic amines listed in the Regulation (EC) No 1907/2006 of the European Parliament and of the Council on the Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) as regards Annex XVII, except 4-aminoazobenzene, cannot be determined quantitatively with this method.
Textiles — Methods for determination of certain aromatic amines derived from azo colorants — Part 3: Detection of the use of certain azo colorants, which may release 4-aminoazobenzene
Textiles — Unevenness of textile strands — Capacitance method
Textiles — Unevenness of textile strands — Capacitance method
Test method for colour fastness to powdered non-chlorine bleach in home laundering
Textile fibres — Determination of breaking force and elongation at break of individual fibres
Test method for determination of aryl amine level on the dyestuff and dyed products
Textile fibres — Determination of breaking force and elongation at break of individual fibres
This document specifies a qualitative and quantitative procedure to determine the composition of animal hair fibre blends by MALDI-TOF MS. The composition of non-animal hair fibres can be measured by methods described in the ISO 1833 series. Both results are then combined to determine the whole composition of fibres. The method is based on a preliminary identification, by light microscopy, of all fibres in a blend on the basis of their morphology, according to ISO/TR 11827. In case fibres of the same animal species are present (e.g. blends of cashmere and mohair), the method is not applicable and the quantitative analysis can be performed using microscopical analysis (e.g. as described in ISO 17751 series).
Textiles — Qualitative and quantitative proteomic analysis of some animal hair fibres — Part 2: Peptide detection using MALDI-TOF MS
This European Standard specifies a procedure for determination of antimony (Sb), arsenic (As), cadmium (Cd), chromium (Cr), cobalt (Co), copper (Cu), lead (Pb), mercury (Hg), nickel (Ni) in natural and man-made textiles, including coated fabrics and garment components (e.g. buttons, zips, etc.) after extraction with acidic artificial perspiration solution.
Textiles - Determination of metal content - Part 2: Determination of metals extracted by acidic artificial perspiration solution
ISO 14362-1:2017 describes a method to detect the use of certain azo colorants that may not be used in the manufacture or treatment of certain commodities made of textile fibres and that are accessible to reducing agent with and without extraction. Azo colorants accessible to reducing agent without extraction are those used to colour with pigments or to dye - cellulosic fibres (e.g. cotton, viscose), - protein fibres (e.g. wool, silk), and - synthetic fibres (e.g. polyamide, acrylic). Azo colorants accessible with extraction are those used to dye man-made fibres with disperse dyes. The following man-made fibres can be dyed with disperse dyes: polyester, polyamide, acetate, triacetate, acrylic and chlorofibre. The method is relevant for all coloured textiles, e.g. dyed, printed and coated textiles.
Textiles — Methods for determination of certain aromatic amines derived from azo colorants — Part 1: Detection of the use of certain azo colorants accessible with and without extracting the fibres
This document specifies a method, using dimethylformamide, to determine the mass percentage of acrylic, modacrylic, chlorofibre or elastane, after removal of non-fibrous matter, in textiles made of mixtures of — acrylic, certain modacrylics, certain chlorofibres, certain elastane fibres with — wool, animal hair, silk, cotton, viscose, cupro, modal, lyocell, polyamide, polyester, elastomultiester, elastolefin, melamine, polyacrylate or glass fibres. It is not applicable to animal hair, wool and silk dyed with chromium based mordant dyes. NOTE Dyestuff identification is described in ISO 16373-1[3].
Textiles — Quantitative chemical analysis — Part 12: Mixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastane fibres with certain other fibres (method using dimethylformamide)
Textiles - Determination of short-chain chlorinated paraffins (SCCP) and middle-chain chlorinated paraffins (MCCP) in textile products out of different matrices by use of gas chromatography negative ion chemical ionization mass spectrometry (GC-NCI-MS) (I
Textiles - Determination of short-chain chlorinated paraffins (SCCP) and middle-chain chlorinated paraffins (MCCP) in textile products out of different matrices by use of gas chromatography negative ion chemical ionization mass spectrometry (GC-NCI-MS) (I
Textiles - Determination of short-chain chlorinated paraffins (SCCP) and middle-chain chlorinated paraffins (MCCP) in textile products out of different matrices by use of gas chromatography negative ion chemical ionization mass spectrometry (GC-NCI-MS) (I
Textiles - Smart textiles - Test method for sheet resistance of conductive textiles using non-contact type (ISO/DIS 24584:2021)
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号