共找到 150 条与 纺织机械 相关的标准,共 10 页
本标准规定了棉纺设备调换齿轮的结构型式、主要参数及技术要求。 本标准适用于棉纺设备的调换圆柱齿轮。毛、麻、丝纺及其他设备亦可参照采用。
Cotton spinning equipment changing gears
本标准规定了使用仪器方法来评价任何色牢度试验中贴衬织物的沾色程度,并可作为评级的一种方法。
Instrumental method for rating the degree of staining of adjacent fabrics
本标准规定了试样变色程度的仪器评级方法,并可作为评级的一种方法。它适用于任何色牢度试验方法,但是试样用荧光增白剂溶液处理的,不能用该方法。
Method for instrumental rating of degree of discoloration of specimens
Textile JFO2, FO2 series high power index three-phase asynchronous motor
Knitting Needle Classification Terminology and Product Code Knitting Method Crochet Terminology
Knitting Needle Classification, Terms and Product Code Knitting Method Latch Needle Terminology
Classification terms of knitting needles and product codes and knitting method composite needle terms
本标准规定了带耳透盖型式、尺寸和技术要求。 本标准适用于安装轴承外径为47~200mm的侧开和整体式轴承座用的带耳透盖。
With ear cover (2)
本标准规定了管夹的技术要求、试验方法、检验规则及标志与包装。 本标准适用于FZ/T 92003^92007-1991所规定的双管夹、单面管夹、双面管夹、双管式管夹和三管式管夹。
Pipe clamp technical conditions
本标准规定了圆透盖的型式、尺寸及技术要求。 本标准适用于安装轴承外径为47~200mm的侧开和整体式轴承座用的圆透盖。
Round transparent cover (2)
本标准规定了扳手空间位置最小尺寸。 本标准适用于纺织机械一般结构零件的扳手(呆扳手、套筒扳手、梅花扳手)空间。
spanner space
本标准规定了带耳端盖的结构尺寸及技术要求. 本标准适用于安装轴承外径为47~200mm的侧开及整体式轴承座用的端盖。
with ear caps
本标准规定了双管夹型式、尺寸及标记. 本标准适用于固定外径自18 mm至60 mm的无缝钢管、输送钢管、不锈钢管、电线套管、铜管等管子的双管夹。
Double Tube Clamp
FTW type outer rotor three-phase permanent magnet synchronous motor
FYD and FYDZ electric spindle motors
本标准规定了纺织机械中轴上紧定螺钉用孔的型式及尺寸。 本标准适用于锥端紧定螺钉和柱端紧定螺钉。
Hole size for set screw on shaft
本标准规定了装螺栓、螺钉用的冲孔尺寸和公差。 本标准括用于纺织机械中金属板材的冲孔,非金属板材也可鸯照傅用·
Dimensions of punching holes for mounting bolts and screws
本标准规定了圆垫片的型式、尺寸及技术要求。 本标准适用于安装轴承外径为 47~200mm的轴承座端盖、透盖用的垫片。
Round gasket size
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号