共找到 2412 条与 皮革和裘皮 相关的标准,共 161 页
1.1 This test method covers the determination of the dynamic water resistance of shoe upper leather by means of the Dow Corning Tester. It is applicable to all types of shoe upper leather. This test method does not apply to wet blue or wet white. 1.2 Initial water penetration and water absorption can be measured. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Test Method for Dynamic Water Resistance of Shoe Upper Leather by the Dow Corning Leather Tester
1.1 This test method covers the determination of the amount of water absorbed by leather at 23 °C 6 2 °C by immersion under static conditions. It may be used on all types of leather. This test method does not apply to wet blue or wet white. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Test Method for Static Water Absorption of Leather
1.1 This test method covers the measurement of the break pattern of shoe upper leather using an arbitrary break scale. This test method does not apply to wet blue or wet white. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Test Method for Measuring Break Pattern of Leather (Break Scale)
1.1 This test method covers the determination of the apparent density of specimens of leather. This test method does not apply to wet blue or wet white. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Test Method for Apparent Density of Leather
1.1 This test method covers the determination of the resistance of leather to grain cracking and for measuring the extension of the leather. It is limited to light leathers such as shoe uppers, garment, gloves, and upholstery. This test method does not apply to wet blue or wet white. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Test Method for Grain Crack and Extension of Leather by the Mullen Test
Leather - Physical and mechanical tests - Determination of water vapour permeability (ISO/DIS 14268:2021)
This document specifies a quantitative test method to determine 24 kinds of pesticide residues in leather by gas chromatography-mass spectrometry (GC-MS). This document is applicable to all types of leather that could release pesticides.
Leather - Chemical tests - Determination of pesticide residues content (ISO 22517:2019); German version EN ISO 22517:2021
Leather - Chemical tests - Determination of pesticide residues content (ISO 22517:2019)
Leather - Chemical determination of chromium(VI) content in leather - Thermal pre-ageing of leather and determination of hexavalent chromium (ISO 10195:2018)
Leather - Leather for apparel (excluding furs) - Specifications and sampling procedures (ISO 14931:2021)
Leather-Tests for colour fastness-Colour fastness to crocking
Testing method for heat resistance of air dry leather of footwear construction
Leather-Determination of distension and strength of grain-Ball burst test
Testing method for set in lasting with the dome plasticity apparatus
Testing method of water vapour permeability for leather
Leather - Determination of ethoxylated alkylphenols - Part 1: Direct method (ISO/DIS 18218-1:2021)
Leather - Per- and polyfluoroalkyl substances - Part 1: Determination of non-volatile compounds by extraction method using liquid chromatography (ISO/DIS 23702-1:2021)
Leather - Chemical determination of metal content - Part 2: Total metal content (ISO/DIS 17072-2:2021)
BS EN ISO 18218-1. Leather. Determination of ethoxylated alkylphenols - Part 1. Direct method
Leather - Tests for colour fastness - Colour fastness to migration into polymeric material (ISO/DIS 15701:2021)
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号